• 한국세라믹학회지
• /
• 제50권3호
• /
• pp.186-194
• /
• 2013

The relationship between composition and properties of enamel glass was investigated by introducing a mixture design. The enamel glass was manufactured by mixing various components under the following constraints: $45{\leq}SiO_2{\leq}55$, $10{\leq}B_2O_3{\leq}18$, $6{\leq}Na_2O{\leq}15$, $1{\leq}Li_2O{\leq}6$, $5{\leq}K_2O{\leq}10$, $0{\leq}TiO_2{\leq}8$, $0{\leq}ZrO_2{\leq}8$, 13.3MO (mol %). A mathematical model for the calculation of some properties of enamel glasses as a function of their composition was developed by the experimental statistical method. The results showed that the proposed model with the experimental measurement were in good agreement and the mixture experimental design was an effective method for optimizing the composition of the enamel glass with respect to its properties.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.223-223
• /
• 1999

PZT(PbZr1-xTixO3) 박막은 고유전율과 같은 remanent polarization을 가져서 고집적 소자의 커패시터 유전율층 또는 비휘발성 메모리 소자의 제조에 이용되고 있으나, fatigue 와 aging 문제로 인하여 새로운 물질의 개발이 필요한데, 그 대표적으로 연구되고 있는 것이 PMN-PT(Pb(Mg1/3Nb2/3)O-PbTiO3) 이다. 본 실험에서는 sol-gel 법에 의하여 제조된 PMN-PT막을 ICP(Inductively coupled plasma)에 의하여 식각하였고 mask층으로는 PR을 사용하였다. 식각 가스로는 Ar, Cl, BCl를 단독 또는 혼합하여 사용하였으며, 식각 특성을 보기 위하여 RF Power, Substrate bias, Operation pressure, Substrate temperature를 변화시켰다. 식각속도는 stylus profiler를 이용하여 측정하였고, 단면 profile은 scanning electron microscopy (SEM)를 이용하여 관찰하였다. 식각 메커니즘을 규명하고자 식각된 박막의 표면을 X-ray photoelectron spectroscopy (XPS)로 관찰하였고, optical emission spectroscopy (OES)로 플라즈마 특성을 규명하고자 하였다. 식각속도는 Ar 또는 Cl2 플라즈마에 BCl3 가스를 혼합하였을 경우 증가되었고, BCl3 가스를 단독으로 사용하여도 높은 식각속도를 나타내었으며, BCl3의 첨가량이 늘어날수록 PR의 식각속도는 감소하여 높은 선택비를 보였다. 90% BCl3/10%Cl2 플라즈마에서 2800$\AA$/min의 식각속도 그리고 1.37:1의 PR 선택비를 얻을 수 있었다. Power나 기판 bias 증가에 따라 식각속도는 증가하였으나 기판 온도변화에는 민감하지 않았다. BCl3 rich에서의 식각속도 증가와 선택비 증가는 B2O3의 형성에 의한 것으로 생각된다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.18-24
• /
• 2019

This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

• 대한치과보철학회지
• /
• 제59권2호
• /
• pp.153-163
• /
• 2021

목적: 본 연구는 지르코니아의 거칠기 증가를 위한 4가지 표면처리 방법과 3종의 레진시멘트가 전단결합강도에 미치는 영향을 알아보고자 하였다. 재료 및 방법: 총 120개의 지르코니아 시편을 표면처리 방법에 따라 4개의 군으로 나누었다: 대조군, 아무 처리를 하지 않은 군; APA50군, 50 ㎛ 크기의 Al2O3로 Airborne-particle abrasion (APA) 처리를 시행한 군; APA125군, 125 ㎛ 크기의 Al2O3로 APA 처리를 시행한 군; ZA군, ZrO2 slurry를 적용한 군. 각 군에 3종의 레진시멘트(Panavia F 2.0, Superbond C&B, Variolink N)를 접착하고, 만능시험기를 이용하여 전단결합강도를 측정하였다. 주사전자현미경을 이용해 각 군의 대표 표본의 표면을 관찰하였다. 표면처리 방법과 레진시멘트 종류에 따른 상호작용이 존재하는지 알아보기 위하여 Two-way ANOVA를 실시하였고, 각 군 간의 통계적 차이를 알아보기 위해 One-way ANOVA를 시행하였다. 사후검정으로 Tukey HSD test를 실시하였다(α = .05). 결과: 표면처리에 따른 전단결합강도 비교에서, APA125군, APA50군, ZA군, 대조군 순으로 높은 값을 보였고, APA처리를 시행한 군(APA50군, APA125군) 간에는 통계적으로 유의한 차이가 없었다(P > .05). 또한, ZA군은 대조군보다 유의성 있게 높은 값을 보였다(P < .05). 레진시멘트 종류에 따라서는 Panavia F 2.0, Superbond C&B, Variolink N 순으로 높은 전단결합강도를 보였다(P < .05). APA50군과 APA125군에서는 거칠고 불규칙한 표면이 관찰되었고, ZA군에서는 작고 불규칙한 다공성과 거친 표면이 관찰되었다. 결론: 본 연구의 한계내에서, APA 처리와 ZrO2 slurry를 적용했을 때 지르코니아의 표면 거칠기가 증가됨을 확인할 수 있었고, MDP를 함유한 Panavia F 2.0가 지르코니아와의 가장 높은 전단결합강도를 보였다.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.29-35
• /
• 2013

A dense mixed ionic and electronic conducting ceramic membrane is one of the most promising materials because it can be used for separation of oxygen from the mixture gas. The $ABO_3$ perovskite structure shows high chemical stability at high temperatures under reduction and oxidation atmospheres. $BaCo_{1-x-y}Fe_xZr_yO_{3-{\delta}}$ (BCFZ) was well-known material as high mechanical strength, low thermal conductivity and stability in the high valence state. Glycine Nitrate Process (GNP) is rapid and effective method for powder synthesis using glycine as a fuel and show higher product crystallinity compared to solid state reaction and citrate-EDTA method. BCFZ was fabricated by modified glycine nitrate process. In order to control the burn-up reaction, $NH_4NO_3$ was used as extra nitrate. According to X-Ray Diffraction (XRD) results, BCFZ was single phase regardless of Zr dopants from y=0.1 to 0.3 on B sites. The green compacts were sintered at $1200^{\circ}C$ for 2 hours. Oxygen permeability, methane partial oxidation rate and hydrogen production ability of the membranes were characterized by using Micro Gas Chromatography (Micro GC) under various condition. The high oxygen permeation flux of BCFZ 1-451 was about $1ml{\cdot}cm^{-2}s^{-1}$. Using the humidified Argon gas, BCFZ 1-433 produced hydrogen about $1ml{\cdot}cm^{-2}s^{-1}$.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.220-226
• /
• 2000

The piezoelectric material for piezoelectric transformer needs the high electromechanical coupling factor( $k_{p}$) the piezoelectric constant( $d_{33}$) and the mechanical quality factor( $Q_{m}$)in order to obtain high voltage step-up ratio and low temperature rising. In this study the piezoelectric transformers were fabricated using Pb［$Zr_{0.45}$/ $Ti_{0}$48//L $u_{0.02}$(M $n_{1}$3//S $b_{2}$3/)$_{0.05}$］ $O_3$(PMS-PZT) and Pb［Z $r_{0.25}$/ $Ti_{0.375}$(M $g_{1}$3//N $b_{2}$3/)$_{0.375}$］ $O_3$+0.5wt%Mn $O_2$(PMN-PZT) ceramics. The piezoelectric properties of PMS-PZT and PMN-PZT were measured. The voltage set-up ratios of the piezoelectric transformers using PMS-PZT and PMN-PZT were the value of 15, 20 respectively under 100$_{KΩ}$ in Rosen type transformer.r.ormer.r.r.r.r.r.r.

• 한국전기전자재료학회논문지
• /
• 제13권8호
• /
• pp.675-680
• /
• 2000

In this study the temperature coefficient of resonant frequency(TC $F_{r}$) dielectric and piezoelectric properties of Pb[(S $b_{1}$2//N $b_{1}$2/)$_{0.065}$)-(Z $r_{x}$, $Ti_{1-x}$ )$_{0.90}$] $O_3$ceramics were investigated with Zr/Ti ratio. The compositions near the morphotropic phase boundary (MPB) appeared when Zr/Ti ratio was 49.5/50.5 The dielectric constant and electromechanical coupling factor( $k_{p}$) also showed the highest values of 1,257, 0.653 respectively when the Zr/Ti ratio was 49.5/50.5 Moreover the mechanical quality factor( $Q_{m}$) showed th lowest value of 713 when the Zr/Ti ratio. The temperature coefficient of resonant frequency(TC $F_{r}$) abruptly change at the morphotropic phase boundary(MPB) which existed between the rhombohedral phase with highly negative TC $F_{r}$ of -106ppm/$^{\circ}C$ and the tetragonal phase with highly positive TC $F_{r}$ of +64pp $m^{\circ}C$ as Zr/Ti ratio varied from 50/50 to 49.5/50.5.50.5..50.5.

• 한국세라믹학회지
• /
• 제45권1호
• /
• pp.1-29
• /
• 2008

In last two decades, an impressive progress has been recorded in terms of developing new materials or refining existing material composition/microstructure in order to obtain better performance in biomedical applications. The success of such efforts clearly demands better understanding of various concepts, e.g. biocompatibility, host response, cell-biomaterial interaction. In this article, we review the fundamental understanding that is required with respect to biomaterials development, as well as various materials and their properties, which are relevant in applications, such as hard tissue replacement. A major emphasize has been placed to present various design aspects, in terms of materials processing, of ceramics and polymer based biocomposites, Among the bioceramic composites, the research results obtained with Hydroxyapatite (HAp)-based biomaterials with metallic (Ti) or ceramic (Mullite) reinforcements as well as $SiO_2-MgO-Al_2O_3-K_2O-B_2O_3-F$ glass ceramics and stabilized $ZrO_2$ based bioinert ceramics are summarized. The physical as well as tribological properties of Polyethylene (PE) based hybrid biocomposites are discussed to illustrate the concept on how can the physical/wear properties be enhanced along with biocompatibility due to combined addition of bioinert and bioactive ceramic to a bioinert polymeric matrix. The tribological and corrosion properties of some important orthopedic metallic alloys based on Ti or Co-Cr-Mo are also illustrated. At the close, the future perspective on orthopedic biomaterials development and some unresolved issues are presented.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1996년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.6-6
• /
• 1996

Ceramic based nanocomposite, in which nano-sized ceramics and metals were dispersed within matrix grains and/or at grain boundaries, were successfully fabricated in the ceramic/cerarnic and ceramic/metal composite systems such as $Al_2O_3$/SiC, $Al_2O_3$/$Si_3N_4$, MgO/SiC, mullite/SiC, $Si_3N_4/SiC, $Si_3N_4$/B, $Al_2O_3$/W, $Al_2O_3$/Mo, $Al_2O_3$/Ni and $ZrO_2$/Mo systems. In these systems, the ceramiclceramic composites were fabricated from homogeneously mixed powders, powders with thin coatings of the second phases and amorphous precursor composite powders by usual powder metallurgical methods. The ceramiclmetal nanocomposites were prepared by combination of H2 reduction of metal oxides in the early stage of sinterings and usual powder metallurgical processes. The transmission electron microscopic observation for the $Al_2O_3$/SiC nanocomposite indicated that the second phases less than 70nm were mainly located within matrix grains and the larger particles were dispersed at the grain boundaries. The similar observation was also identified for other cerarnic/ceramic and ceramiclmetal nanocornposites. The striking findings in these nanocomposites were that mechanical properties were significantly improved by the nano-sized dispersion from 5 to 10 vol% even at high temperatures. For example, the improvement in hcture strength by 2 to 5 times and in creep resistance by 2 to 4 orders was observed not only for the ceramidceramic nanocomposites but also for the ceramiclmetal nanocomposites with only 5~01%se cond phase. The newly developed silicon nitride/boron nitride nanocomposites, in which nano-sized hexagonal BN particulates with low Young's modulus and fracture strength were dispersed mainly within matrix grains, gave also the strong improvement in fracture strength and thermal shock fracture resistance. In presentation, the process-rnicro/nanostructure-properties relationship will be presented in detail. The special emphasis will be placed on the understanding of the roles of nano-sized dispersions on mechanical properties.

• 대한화학회지
• /
• 제55권3호
• /
• pp.418-429
• /
• 2011

[ $N^1,N^2$ ]bis(3-((3-hydroxynaphthalen-2-yl)methylene-amino)propyl)phthalamide ($H_4L$, 1) 의 새로운 크롬(III), 망간(II), 철(III), 코발트(II), 니켈(II), 구리(II), 루테늄(III) 및 산화 지르코늄(II) 착물을 합성하여 원소분석, 물리적 성질 및 분광학적으로 특성을 규명하였다. 분광학적 결과를 통해 이 리간드는 $[H_4LMX_2(H_2O)]{\cdot}nH_2O$ (M = Cu(II), Ni(II), Co(II), X = Cl 또는 $NO_3$)의 일반식을 갖는 착물2-5에서는 중성의 삼배위 리간드로 행동한다. 또는 $[H_4L(ZrO)_2Cl_2]{\cdot}8H_2O$ 의 일반식을 갖는 착물 6-9 에서는 이염기성 육배위 리간드로 행동한다. DMF 용액에서의 몰전기전도도 실험결과 이들 착물은 비이온성을 나타낸다. 고체 구리착물 2, 5 및 6 의 ESR 스펙트럼에서 $g_{\parallel}$ >g> $g_e$을 보이는데, 이는 일그러진 팔면체구조와 큰 공유결합성을 갖는 $d{_x}^2{_{-y}}^2$ 오비탈에 비공유 전자쌍이 존재함을 의미한다. 이합체 구리(II) 착물 $[H_2LCu_2Cl_2(H_2O)_4]{\cdot}3H_2O$ (6)에 대해 두 구리원자 사이의 거리를 ESR 스펙트럼으로부터 추정한 parallel component 의 field zero splitting 파라메타를 이용하여 계산하였다. 이들 화합물의 항박테리아 및 항균 활성도를 측정한 결과, 몇가지 금속 착물의 경우 표준시약인 tetracycline (박테리아) 및 Amphotricene B (균류)보다 더 큰 저해효과를 보였다.