• 제목/요약/키워드: $B_2O_3$/$ZrO_2$

검색결과 182건 처리시간 0.032초

레진시멘트 색상이 상용 지르코니아 크라운의 색상에 미치는 영향 (Effect of resin cement color on the color of commercially available zirconia crown)

  • 하현승;임범순;이상훈
    • 대한치과재료학회지
    • /
    • 제45권4호
    • /
    • pp.233-242
    • /
    • 2018
  • 본 연구의 목적은 레진시멘트 색상이 상용 지르코니아 크라운의 색상에 미치는 영향을 평가하는 것이다. 연구에는 $NuSmile^{(R)}$ ZR Zirconia LT Shade (LT) 지르코니아와 $RelyX^{TM}$ U200 TR, A2, A3O (TR, A2, A3O) 레진시멘트를 사용했다. 이 때 지르코니아와 레진시멘트 시편은 직경 5 mm, 두께 1 mm의 디스크 형으로 각 조건 당 다섯 개씩 제작했다. CIE $L^*a^*b^*$값은 검은색과 흰색 배경에서 분광 광도계를 사용해 지르코니아와 레진시멘트 단독 조건과 겹친 조건에서 각각 측정했다. 레진시멘트 색상이 상용 지르코니아 크라운의 색상에 미치는 영향은 측정된 값을 이용해, 반투명도(TP, translucency parameter), 대조비(CR, contrast ratio), 색차(${\Delta}E{^*}_{ab}$)의 계산을 통해 평가했다. 각 변수에 대한 평균값과 표준편차는 동일한 실험군에서 CIE $L^*a^*^b^*$ 값을 3회씩 측정하여 구했다. 실험군의 통계적 유의성은 일원배치 분산분석(one-way ANOVA)과 Tukey-multiple comparisons test로 검증했다. 그 결과, 지르코니아 하방에 레진시멘트를 겹친 조건일 때는 지르코니아 단독 조건일 때에 비해 반투명도는 감소했고(p<0.05) 대조비는 증가했다. 검은색 배경에서 지르코니아와 지르코니아 하방에 레진시멘트를 겹쳤을 때의 색차는 모든 실험군에서 색의 변화를 인지할 수 없었고 LT/A3O 조합에서 최소값을 보였다. 한편, 흰색 배경에서 지르코니아와 지르코니아 하방에 레진시멘트를 겹쳤을 때의 색차는 LT/TR 조합에서 색변화를 임상적으로 허용할 수 있는 경계값을 보였다. LT/A2 조합에서는 색변화를 임상적으로 허용할 수 없었고, LT/A3O 조합에서는 색변화를 인지할 수 있었으나 임상적으로 허용할 수 있는 수준이었다. 이상의 결과와 같이 본 연구의 한계 내에서는, 흰색 배경의 LT/A2 조합 외에는 지르코니아 색상에 임상적으로 허용할 수 없는 색변화를 주는 레진시멘트는 없었다. 그 중 지르코니아 색상에 최소한의 영향을 미치는 레진시멘트 색상은 A3O였다. 따라서, 본 연구와 동일한 상용 지르코니아 크라운을 치아에 접착할 때 색변화를 최소화하기 위해서는 A3O 색상의 레진시멘트 사용이 추천된다.

Microstructural Properties of the Insoluble Residue in a Simulated Spent Fuel

  • Kim, J.S.;Song, B.C.;Jee, K.Y.;Kim, J.G.;Chun, K.S.
    • Nuclear Engineering and Technology
    • /
    • 제30권2호
    • /
    • pp.99-111
    • /
    • 1998
  • Chemical composition of the insoluble residue in a simulated spent PWR fuel(SIMRJEL) were studied. SIMFUELS were prepared by adding calculated amount of FP(fission product) elements with a burnup of 3.6% FIMA(fission per initial metal atom) to uranium in nitrate solution, evaporating the mixed solution to dryness, calcining at 90$0^{\circ}C$ in a stream of 4% H$_2$ + 96% He, and heating the pellet at 140$0^{\circ}C$ under high and low oxygen potentials. Insoluble residue was obtained from the dissolution of the SIMFUEL with HNO$_3$(1 : 1). The chemical composition of the SIMFUELs and the insoluble residues was determined by EPMA(electron probe microanalysis), XPS(X-ray photoelectron spectroscopy) and by XRD (X-ray diffraction) measurements. All of the insoluble residues suspended and precipitated were composed mainly of Mo, Ru with a small amount of Zr, Rh, Pd and Cd. The amount of insoluble residue(<1 wt.%) and a Mo/Ru ratio decreased with increasing oxygen potential. Formation of the zirconium molybdate precipitate, ZrMo$_2$O$_{7}$(OH)$_2$($H_2O$)$_2$, was observed in the residues. The possible role of Mo on the phase formation was discussed in regard to oxygen potential.l.

  • PDF

두께진동모드를 이용한 고주파대역의 단일체 세라믹필터에 대한 연구 (A study on the HF monolithic ceramic filter using thickness mode)

  • 박창엽;위규진;이두희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
    • /
    • pp.242-244
    • /
    • 1987
  • Using the energy trapping theory and the acoustic coupling theory. the Bandpass filter(center frequency = 10.7 MHz) of the fundamental thickness mode was made from the composition of $Pb_{0.96}Sr_{0.04}(Zr_{0.53}Ti_{0.47})O_3$+ 1wt% $Fe_2O_3$. Also, in the double mode monolithic filter, It was observed that as decreasing the size of the electrodes, or shortening the gap between two electrodes, the percent frequency separation was increased. Based on these. a 10.7 MHz uniwafer filter was made having the characteristics that bandwidth was 700 KHz and the percent frequency separation was 6 [dB] and selectivity was 29 [dB], end spurious response was 24 [dB] and insertion loss was 7 [dB].

  • PDF

Dependence of the lithium ionic conductivity on the B-siteion substitution in $(Li_{0.5}La_{0.5})Ti_{1-x}M_xO_3$

  • Kim, Jin-Gyun;Kim, Ho-Gi
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제11권11호
    • /
    • pp.9-17
    • /
    • 1998
  • The dependence of the ionic conductivity on the B-site ion substitution in (Li0.5La0.5)Ti1-xMxO3 (M=Sn, Zr, Mn, Ge) system has been studied. Same valence state and various electronic configuration and ionic radius of Sn4+, Zr4+, Mn4+ and Ge4+(4d10(0.69$\AA$), 4p6(0.72$\AA$), 3d10(0.54$\AA$) and 3d3(0.54$\AA$), respectively) induced the various crystallographic variaton with substitutions. So it was possibleto investigate the crystallographic factor which influence the ionic conduction by observing the dependence of the conductivity on the crystallographic factor which influence the ionic conduction by observing the dependence of the conductivity on the crystallographic variations. We found that the conductivity increased with decreasing the radii of B-site ions or vice versa and octahedron distortion disturb the ion conduction. The reason for this reciprocal proportion of conductivity on the radius of B-site ions has been examined on the base of the interatomic bond strength change due to the cation substitutions. The results were good in agreement with the experimental results. Therefore it could be concluded that the interatomic bond strength change due to the cation substitutions may be the one of major factors influencing the lithium ion conductivity in perovskite(Li0.5La0.5) TiO3system.

  • PDF

충주 어래산 일대에서 산출하는 희토류 광물의 광물학적 및 광물화학적 특성 (Mineralogy and Mineral-chemistry of REE Minerals Occurring at Mountain Eorae, Chungju)

  • 유병운;이길재;고상모
    • 자원환경지질
    • /
    • 제45권6호
    • /
    • pp.643-659
    • /
    • 2012
  • 충주 지역은 소위 옥천층군에 해당되는 계명산층이 분포하며, 계명산층내에는 변성화산암 모암과 페그마타이트 모암의 희토류 광체가 배태한다. 변성화산암 모암의 희토류 광체를 구성하는 희토류광물은 갈렴석, 저어콘, 인회석, 스핀이 산출하나 갈렴석이 가장 우세하게 산출한다. 페그마타이트 모암의 희토류 광체를 구성하는 희토류 광물은 퍼구소나이트, 카르나수르타이트, 저어콘, 토륨석이 산출하나 퍼구소나이트가 가장 우세하다. 변성화산암에서 산출하는 갈렴석의 화학식은 (Ca, Y, REE, Th)$_{2.095}$(Mg, Al, Ti, Mn, $Fe^{3+})_{2.770}(SiO_4)_{2.975}(OH)$로서 TREO 23.89-29.12 wt%, $La_2O_3$ 4.71-9.92 wt%, $Ce_2O_3$ 11.30-14.33 wt%, $Y_2O_3$ 0.11-0.29 wt%, $ThO_2$ 0.12-0.94 wt% 이다. A(2) 사이트 에서 $Ca^{2+}$$REE^{3+}$, M(2) 사이트에서 $Al^{3+}$$Fe^{2+}$의 치환이 일어나는데 이는 갈렴석의 화학조성에 밀접한 관련을 갖는 특징이고, Fe의 함량이 일반 갈렴석보다 높은 Ce 계열의 Ferriallanite에 해당된다. 이는 모암인 계명산층을 주로 구성하는 변성화산암(변성조면암)의 원암이 Fe이 풍부한 함철층이기 때문인 것으로 판단된다. 페그마타이트 모암에서 가장 우세하게 산출하는 퍼구소나이트의 화학조성은 A 사이트에서 Y-REE, Y-Th 치환이 우세하게 일어났으며, B 사이트에서는 Nb-Ta-Ti의 치환이 주로 초래되었으며, 계산된 화학식은 $YNbO_4$ 이다. 또한 $Y_2O_3$$Nb_2O_5$만의 비율로 상관도를 확인 한 결과 연구지역에서 산출되는 퍼구소나이트는 Y과 Nb의 이상적인 비율인 1:1 비율과 달리 1:1.5의 비율을 나타내고 있으며, Nb의 함량이 Y 함량보다 높으며, Y 사이트 즉, A 사이트에서 희토류 원소의 치환이 활발하게 초래되었다. 페그마타이트에서 산출하는 카르나수르타이트는 REE 및 Th를 치환하는 조성은 각각 $Ce_2O_3$ 9.16-22.88 wt%, $La_2O_3$ 2.15-9.16 wt%, $ThO_2$ 0.44-10.8 wt%, 화학조성으로 계산된 구조식은 (Y, REE, Th, K, Na, Ca)$_{1.478}$(Ti, Nb)$_{1.304}$(Mg, Al, Mn, $Fe^{+3})_{0.988}$(Si, P)$_{1.431}O_7(OH)_4{\cdot}3H_2O$이다. 870-860 Ma 인 초기 원생대에 로디니아 대륙의 분열기로서 한반도에서 A-1형 화산활동이 초래되어 철, 희토류원소 및 고장력원소(Nb, Zr, Y 등)가 풍부한 변성화산암으로 주로 구성되는 계명산층을 형성 시켰다면 갈렴석은 모암이 형성될 당시 알카리 화산암에서 정출되었거나 변성작용이 초래된 고생대 말(300-280 Ma, Cho et al., 2002) 광역변성작용에 의해 형성 되었을 가능성이 높다. 희토류를 함유하는 페그마타이트에서 산출하는 저어콘 연대가 190 Ma 인 것은 쥬라기에 충주지역에서 광범위하게 초래된 화강암 정치활동과 관련된 가능성이 크다. 따라서 충주지역 계명산층 내 배태된 희토류 광체는 인접한 지역에 배태되어 있지만 매우 차별적 희토류 광화작용이 초래 되어 희토류광물조성과 광체의 산상이 차별적으로 나타나는 것으로 해석된다.

Annealing Effect of Permeability Spectra in Amorphous Fe83Zr7B8Cu2

  • Kim, C.G.;Ryu, G.H.;Yu, S.C.;Moon, Y.M.;H.K. Lachowicz
    • Journal of Magnetics
    • /
    • 제3권2호
    • /
    • pp.41-43
    • /
    • 1998
  • The frequency spectra of complex permeability have been measured as a function of ac field amplitude in the annealed amorphous $Fe_{83}Zr_7B_8Cu_2 $ ribbons. The longitudinal permeability results from the rotational magnetization at small fields, $h_o$<5 mOe in as-quenched samples. However, at the further increase of ho, the wall motion begins to be involved in the low frequency region. The permeability from the wall motion drastically decreases in the annealed sample, while that from the rotational magnetization increases up to annealing temperature of 50$0^{\circ}C$ and then drops there after.

  • PDF

증착방법을 달리한 $TiO_2$ 박막의 표면처리에 따른 저항변화 특성 연구

  • 성용헌;김상연;도기훈;서동찬;조만호;고대홍
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.206-206
    • /
    • 2010
  • 정보화 기술이 급속히 발전함에 따라서 보다 많은 양의 data를 전송, 처리, 저장 하게 되면서 이를 처리 할 수 있는 대용량, 고속, 비휘발성의 차세대 메모리의 개발이 요구 되고 있다. 이 중 저항 변화 메모리(ReRAM)는 일반적으로 전이금속산화물을 이용한 MIM 구조로서 적당한 전기 신호를 가하면 저항이 높아서 전도되지 않는 상태(Off state)에서 저항이 낮아져 전도가 가능한 상태(On state)로 바뀌는 메모리 특성을 가진다. ReRAM은 비휘발성 메모리이며 종래의 비휘발성 기억소자인 Flash memory 보다 access time이 $10^5$배 이상 빠르며, 2~5V 이하의 낮은 전압에서 동작이 가능하다. 또한 구조가 간단하여 공정상의 결함을 현저히 줄일 수 있다는 점 등 많은 장점들이 있어서 Flash memory를 대체할 수 있는 유력한 후보로 여겨지고 있다. 저항 변화의 특징을 잘 나타내는 물질에는 $TiO_2$, $Al_2O_3$, $NiO_2$, $HfO_2$, $ZrO_2$등의 많은 전이금속산화물들이 있다. 본 연구에서는 Reactive DC-magnetron Sputtering 방법과 DC-magnetron sputter를 이용하여 Ti를 증착한 후 Oxidation 방법으로 각각 증착한 $TiO_2$박막을 사용하여 저항변화특성을 관찰하였다. $TiO_2$상부에 Atomic Layer Deposition (ALD)를 이용하여 $HfO_2$ 박막을 증착하여 표면처리를 하고, 또한 $TiO_2$에 다른 전이 금속박막 층을 추가 증착하여 저항변화 특성에 접합한 조건을 찾는 연구를 진행하였다. 하부 전극과 상부 전극 물질로는 Si 100 wafer 위에 Pt 또는 TiN을 사용하였다. 저항변화 특성을 평가하기 위해 Agilent E5270B를 이용하여 current-voltage (I-V)를 측정하였다. X-ray Diffraction (XRD)를 이용하여 증착 된 전기금속 박막 물질의 결정성을 관찰했으며, Atomic Force Microscopy (AFM)을 이용하여 증착 된 샘플의 표면을 관찰했다. SEM과 TEM을 통해서는 sample의 미세구조를 확인 하였다.

  • PDF

PMW-PNN-PZT계 세라믹스의 유전및 압전특성 (Dielectric and Piezoelectric Properties of PMW-PNN-PZT System Ceramics)

  • 윤광희;류주현;윤현상;박창엽
    • 한국전기전자재료학회논문지
    • /
    • 제13권3호
    • /
    • pp.214-219
    • /
    • 2000
  • In this paper the structural dielectric and piezoelectric properties of Pb[(M $g_{1}$2// $W_{1}$2/)$_{x}$-(N $i_{1}$3//N $b_{2}$3/)$_{0.15-x-(Zr_{0.5})}$ $Ti_{0.5}$)$_{0.85}$$O_3$ (x=0.0~0.10) ceramic were investigated with the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$. According to the substitution of Pb(M $g_{1}$2//W/1/2/) $O_3$ curie temperatures were slightly decrease due to the decrease of the tetrag-onality of crystal structure and coercive fields were decreased. Up to the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ 3mol%,remnant polarization dielectric constant piezoelectric constant were increased. Dielectric constant and electro-mechanical coupling factor( $k_{p}$, $k_{31}$ ) were appeared the highest value of 2230, 0.64, and 0.38 and piezoelectric constant( $d_{33}$ , $d_{31}$ ) was the largest value of 418, 202($\times$10$^{-12}$ /C/N), respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/N) respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ was 3mol%.s 3mol%.%.

  • PDF

Sr이 치환된 PMN-PT-PZ 계 세라믹스를 이용한 압전 발음체에 관한 연구 (A Study on the Piezoelectric Sounder Using the PMN-PT-PZ with Sr Sustitutions)

  • 유학수;백동수;강진규;박창엽
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1991년도 추계학술대회 논문집 학회본부
    • /
    • pp.293-295
    • /
    • 1991
  • In this study, we investigated the possibilty that $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3-PbZrO_3$ ceramics with strontium substitutions could be used for piezoelectric sounders. Piezoelectric buzzer is one of them. By partially substituting Sr for Ph, dielectric constants had values greater than 2000, the value proper piezoelectric buzzer, piezoelectric constant($d_{31}$) had a maximum value, 298 $[10^{-12}C/N]$, at the Sr 5 mol % substitution. Sound level of piezoelectric buzzer had the highest value of 91 dB at the Sr 5 mol % substitution.

  • PDF

지향성 스피커용 PSN-PZT 세라믹스의 압전 특성에 미치는 CeO2 첨가 효과 (Effect of CeO2 on piezoelectric properties of PSN-PZT ceramics for a hypersonic sound speaker application)

  • 최정범;송건화;김한지;황성익;유광수
    • 센서학회지
    • /
    • 제17권2호
    • /
    • pp.127-132
    • /
    • 2008
  • The effect of $CeO_2$ as a sintering additive on the microstructure and the piezoelectric property of yPb$(Sb_{0.5}Nb_{0.5})O_3$-(1-y)Pb$(Zr_{0.52}Ti_{0.48})O_3$ ($0{\leq}y{\leq}0.1$, PSN-PZT) for a hypersonic sound speaker (HSS) application was investigated. The samples were sintered at $1250^{\circ}C$ for 2 h. The crystal structure and surface morphology of the samples were examined using XRD and FE-SEM, respectively. Study on the influence of $CeO_2$ additives on the dielectric and piezoelectric properties indicated that the $CeO_2$-added PSN-PZT system had a high piezoelectric properties. The optimized results of ${\varepsilon}_r=1209$, $K_p$=52% $d_{33}$=351(pC/N) and $Q_m$=1230.16 were obtained at 0.4 wt.% $CeO_2$-added PSN-PZT.