• Korean Journal of Medicinal Crop Science
• /
• v.3 no.1
• /
• pp.61-65
• /
• 1995

Karyotype analysis was carried out in four lines of Bupleurum falcatum L. cultivated in Korea and SDS-PAGE was applied to determine the seed protein profiles among the lines. Chromosomes were classified into two groups, large and small ones. Two kinds of karyotype, 2n=20 and 2n=26, were identified. Chromosome 1 of 2n=20 were all submedian, while that of 2n=26 were median. Chromosomes 2, 3 and 5 of 2n=20 showed polymorphism in size and arm-ratio. Chromosome 2 was submedian, while others were median in the line of 2n=26. Karyotypcs of cultivars native of Korea were similiar each other, while those introduced from Japan showed different patterns. In SDS PAGE gels, qualitative difference s in high molecular weight proteins, more than 45KD, were detected among the lines. The numbers of specific band were three in lines of 2n=20 and two in 2n=26.

• The Journal of Korean Medicine
• /
• v.34 no.4
• /
• pp.46-55
• /
• 2013

Objectives: Classifying the pattern of jaundice during diagnosis will significantly improve the outcome of common KM interventions. This study aimed at determining an objective index for accurately diagnosing heat and dampness KM patterns in patients with jaundice. Methods: We systematically reviewed laboratory findings from case reports published in the scientific literature of Korean medicine. Cases were classified as following either the heat or dampness pattern. Biochemical indices were compared using a Bayesian factor (BF) analysis and standard t-tests. Results: The laboratory findings of 32 patients were evaluated. The heat pattern was observed in 17 patients and the dampness pattern in 15. No significant differences were observed between the 2 groups in terms of white blood cell count (BF=1.659); hemoglobin concentration (BF=2.627); platelet count (BF=1.019); or levels of direct bilirubin (BF=1.453), aspartate aminotransferase (BF=1.226), alanine aminotransferase (BF=1.340), alkaline phosphatase (BF=2.344), or gamma-glutamyl transpeptidase (BF=2.782). However, total bilirubin levels were significantly higher in the dampness pattern group (BF=0.854, P-value=0.070). Conclusions: Patients with high total bilirubin levels may predominantly follow the dampness pattern, while those with low levels may predominantly follow the heat pattern. These results are expected to be useful for the development of timely and efficient KM treatments as well as new integrative therapeutic approaches for jaundice. However, further studies are essential to fully validate the utility of total bilirubin as a biomarker for differentiating between heat and dampness patterns.

• Progress in Superconductivity
• /
• v.14 no.1
• /
• pp.24-29
• /
• 2012

$(TMTSF)_2BF_4$ containing non-centrosymmetric anions is well known to exhibit a metal insulator transition around 37 K by ordering of the anions with a $q_2$=(1/2, 1/2, 1/2) wave vector. We established pressure-temperature phase diagram of the $(TMTSF)_2BF_4$ compound and showed that it can belong to the general phase diagram of the $(TMTSF)_2X$ family. Application of hydrostatic pressure decreases the anion ordering transition temperature and the superconducting state is finally stabilized below 3.77 K under 7.7 kbar. Magnetoresistance measurement on the $(TMTSF)_2BF_4$ under 7.8 kbar is performed but neither the field-induced spin-density-wave state nor the rapid oscillation is observed up to 9 T.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.2
• /
• pp.153-162
• /
• 2021

The effects of activated carbon originated Ballasted Flocculant (BF) on the settleability of activated sludge and the recovery of BF by Hydro-cyclone (HC) were analyzed experimentally. Two kinds of BF (M-I: 125-250 ㎛, M-II: 250-425 ㎛ in dia.) and three kinds of activated sludges with different SS concentration (2,300-7,100 mg/L) were applied for this study. With the dosage variation of BF from 0.14 to 1.3 g-BF/g-SS, we could obtain 24-31% improvement in SV30 (Sludge Volume after 30min sedimentation) for the lowest SS concentration sludge (2,300 mg/L). Whereas the SV30 improvement was much higher as 44-48% for the highest SS concentration sludge (7,100 mg/L). The settling characteristics of the sludge with BF followed Vesilind model the best among three models (Vesilind, Takacs and Cho model). HC could effectively separate BF with the separation efficiency of 70-90% and over 95% separation efficiency could be obtained when the HC was applied twice.

• Structural Engineering and Mechanics
• /
• v.91 no.2
• /
• pp.177-195
• /
• 2024

This research plans to investigate the simultaneous impact of bamboo fibers (BF) and steel fibers (SF) on the mechanical and spalling characteristics of ultra-high-performance concrete (UHPC) exposed to high temperatures (HT). To this aim, 25 mixtures were made and assessed. BF was added at five contents of 0, 2.5, 5, 7.5 and 10 kg/m³. Additionally, SF was used at five weight contents: 0%, 1%, 2%, 3% and 4%. Specimens were exposed to temperatures ranging between 25℃ and 800℃. Thus, com-pressive, tensile, and flexural strengths, elastic moduli, mass loss, and permeability were measured. Experiments revealed that the simultaneous use of low BF and SF contents could totally prevent spalling of UHPC, but the use of either SF or BF alone could not prevent spalling at high levels of fibers. Besides, the synergetic positive impact of BF and SF on the spalling resistance of UHPC was by reason of the rise of BF' permeability and the bridging role of SF at HT. Moreover, it was concluded that the use of SF could moderate the adverse influence of BF on the compressive resistance of UHPC.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.11
• /
• pp.887-893
• /
• 1991

To take advantage of Ti-polycide, when it is contacted with both n+ and p+ active area of silicon, the effects of BF$_2$ on the formation of Ti-silicide were investigated with RTA temperature and dopant concentration. The intermediate phase C49 TiSi$_2$ appeared at $650^{\circ}C$ and the stable phase C54 TiSi2 was formed at $700^{\circ}C$. And the formation of Ti-silicide was hindered by BF$_2$ doping and this trend was decreased with increasing temperature. The out-diffusion phenomena of BF$_2$ into Ti silicide were not observed. And significantly, the native oxide was a chief factor preventing the formation of Ti-silicides.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1852-1858
• /
• 1990

The sheet resistance and thickness of Ti-Silicides treated RTA at 600, 700, 800\ulcorner was measured with amount of BF2 implanted in Si substrate. And the profile of BF2 was studied by SIMS. The formation of TiSi2 starts at 700\ulcorner. The Ti-Silicides almost consist of TiSi2 and have a low resistivity about 16列 cm at 800\ulcorner. The sheet resistances of Ti-silicides increase and thicknesses of it decrease with increasing dose of BF2. Considering the results of SIMS and the thickness of native oxide, the decrease of thickness of Silicides chiefly results from the increase of native oxide thickness with increasing dopants.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.4
• /
• pp.277-284
• /
• 2021

The ballasted flocculation effects of the mill scale and magnetite on activated sludge were investigated. Both ballasted flocculants (BF) could remarkably improve the sludge settleability in terms of zone settling velocity (ZSV) and sludge volume index (SVI). With the BF dosage of 0.2 to 2.0 g-BF/g-SS, the magnetite particles showed better efficiency on improving settling behavior of activated sludge than the mill scale due to higher surface area and hydrophobic property. The efficiency of SVI₃₀ with magnetite injection was 2.5 to 11.3% higher than mill scale injection and that of the ZSV appreciated from 23.7% to 44.4% for magnetite injection. Averaged floc size of the BF sludge with magnetite dosage (0.5 g-BF/g-SS) was 2.3 times higher than that of the control sludge. Dewaterability of the sludge was also greatly improved by addition of the BF. The specific resistance to filtration (SRF) was reduced exponentially with increasing the dosage of BF. However, the BF's particle size effect on the SRF looks to be marginal. Consequently, for improving the dewaterability, the BF played a physical role to remove the pore water of the biological flocs by intrusive attachment and a chemical role to induce aggregation of the flocs by charge neutralization.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.611-616
• /
• 2018

Lead apron is harmful to the human body because it is made at heavy metals, and when worn for long periods of time, it causes pain. Therefore, this paper intended to improve the defects of lead apron by using new material shields. For the comparative evaluation of lead and new material shieldes, the shielding rate and weight were measured and tested based on lead 0.5 mmPb. The rate of shielding was 97% based on lead at 0.5 mm thickness, while The new material shield T3 showed similar shielding rates as lead in 8 layers, and in T2 these values were measured in 11 layers. In addition, similar shielding rate was measured in 12 layers at B2, and 8 layers in BF, and 4 layers in $BF_2$. Comparing the weight of cases when commercialized with apron, T3, T2 and B2 were heavier than lead apron. But BF, $BF_2$ were lighter than the lead apron. Based on the results of the experiment, T3 and T2 can be used as an alternative to lead if human or environmental hazards are considered a priority. However, BF and $BF_2$ should be used if the reduction of external exposure is considered a priority.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.32-45
• /
• 2000

This paper presents the analytic derivation of the SINR, when a linear array antenna is accommodated into the cellular CDMA basestation receiver, in relation to the two major performance effecting factors in beamforming(BF) applications, i. e., the direction selectivity, which refers to the narrowness of the mainbeam width, and the direction-of-arrival(DOA) estimation accuracy. The analytically derived results are compared with the operation simulation of the receiver realized with the several BF algorithms and their agreements are confirmed, consequently verifying the correctness of the analysis and the operation simulation. In order to investigate separately the effects of the errors occurring in the direction estimation and in the interference suppression, which are the two major functional components of general BF algorithms, both the algorithms of steering BF and the minimum- variance- distortionless-response(MVDR) BF are applied to the analysis. A signal model to reflect the spatially scattering phenomenon of the RF waves entering into the .:nay antenna, which directly affects on the accuracy of the BF algorithm's direction estimation, is also suggested in this paper and applied to the analysis and the operation simulation. It is confirmed from the results that the enhancement of the direction selectivity of the away antenna is not desirable in view of both the implementation economy and the BF algorithm's robustness to the erroneous factors. Such a trade-off characteristics is significant in the sense that it can be capitalized to obtain an economic means of BF implementation that does not severely deteriorate its performance while ensuring the robustness to the erroneous effects, consequently manifesting the significance of the analysis results of this paper that can be used as a design reference in developing BF algorithms to the cellular CDMA system.