• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.497-500
• /
• 2000

In this paper, we compare the bit-error-rate performance of the fast-frequency-hopped spread-spectrum multiple-access (FFH/SSMA) and direct-sequence code-division multiple access (DS/CDMA) systems in a Rician fading channel. Each system has a same data rate, bandwidth and transmits over a Rician fading channel. The results illustrate tradoffs in performance between the FFH/SSMA and DS/CDMA systems as a function of the parameters such as average signal to noise ratio and processing gain. The performance of the FFH/SSMA system is shown to be less sensitive to the change of fading environments, while the change of processing gain and average signal to noise ratio gives considerable affect to the FFH/SSMA system compared with the DS/CDMA system. Without respect to the change of system parameters, for most of Rician fading channels (except non-fading channel), FFH/SSMA system gives better performance than DS/CDMA system in BBR < 10$\^$-3/.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.2 no.1
• /
• pp.56-60
• /
• 2016

Benzyltrimethylammonium dichloroiodate in the presence of $ZnCl_2$ has been used for aromatic iodination of electron rich aromatic compounds. However, Baylis-Hillman type regioselective ${\alpha}$-iodination was carried out electronically rich coumarin compound under mild reaction condition with excellent chemical yield. Finally, $BBr_3$ demethylation gave ${\alpha}$-iododaphnetin.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.1 no.1
• /
• pp.157-178
• /
• 2006

BPMS implementation in L Electronics, which started in 2003, was spotlighted in the IS Project and research area. L Electronics has conducted process innovation with the goal of being one of the Global Top 3 brands. Continuous business environment changes because of globalization and speedy development of information technology have caused changes in business process and functions. This case examines its efforts for optimizing business process continuously and systematically with BPMS and discusses the implication and potential of business process innovation with BPMS.

• International Journal of Highway Engineering
• /
• v.2 no.1
• /
• pp.123-133
• /
• 2000

The asphalt mixture with CRM(Crumb Rubber Modifier) is known to show a better performance in resisting thermal cracking, fatigue cracking, and rutting compared with the conventional mixture. In this research, the lab tests on the physical and the mechanical characteristics of the domestic crumb rubber modified asphalt binder and conventional asphalts (AP-3, AP-5) were conducted. The physical test results show that CRM asphalt has better physical characteristics than that of conventional asphalts. The dynamic shear rheometer test results in high temperature show that CRM asphalt has higher complex shear modulus and aging resistance than those of conventional asphalts. And, the bending beam rheometer in low temperature test results show that CRM asphalt has higher resistance to thermal cracking than that of conventional asphalts.

• Current Photovoltaic Research
• /
• v.3 no.3
• /
• pp.80-84
• /
• 2015

We suggest new emitter formation method using solid-phase epitaxy (SPE); solid-phase epitaxy emitter (SEE). This method expect simplification and cost reduction of process compared with furnace process (POCl3 or BBr3). The solid-phase epitaxy emitter (SEE) deposited a-Si:H layer by radio-frequency plasma-enhanced chemical vapor deposition (RF-PECVD) on substrate (c-Si), then thin layer growth solid-phase epitaxy (SPE) using rapid thermal process (RTP). This is possible in various emitter profile formation through dopant gas ($PH_3$) control at deposited a-Si:H layer. We fabricated solar cell to apply solid-phase epitaxy emitter (SEE). Its performance have an effect on crystallinity of phase transition layer (a-Si to c-Si). We confirmed crystallinity of this with a-Si:H layer thickness and annealing temperature by using raman spectroscopy, spectroscopic ellipsometry and transmission electron microscope. The crystallinity is excellent as the thickness of a-Si layer is thin (~50 nm) and annealing temperature is high (<$900^{\circ}C$). We fabricated a 16.7% solid-phase epitaxy emitter (SEE) cell. We anticipate its performance improvement applying thin tunnel oxide (<2nm).

• Bulletin of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.266-271
• /
• 1993

The reaction of $(CO_5$)M=C(OMe)Tol (M=Cr, Mo, W and $Tol=p-C_6H_4Me)$ and $BBr_3$ followed by treatment with tetramethylethylenediamine (TMEDA) yields a mixture of two diastereomers, trans, $cis-Br(CO)_2(tmeda)M{\equiv}$CTol [M=Cr(1a), Mo(2a), W(3a)] and cis, $trans-Br(CO)_2(tmeda)M{\equiv}$CTol [M=Cr(1b), Mo(2b), W(3b)], respectively. These compounds have been isolated as crystalline solids and characterized by spectroscopic (infrared, mass, $^1H$ and $^{13}C-NMR)$ data. The trans, cis-Br(CO)2(tmeda)Cr${\equiv}$CTol (1a), has been examine via a single crystal X-ray diffraction study : $BrCrO_2N_2C_{16}H_{23}$, Mr=407.27, triclinic, $P{\bar{1}},\;a=12.792(2),\;b=13.400(5),\;c= 11.645(4)\;{\AA},\;{\alpha}=101.26(2)^{\circ},\;{\beta}=103.04(2)^{\circ},\;{\gamma}=91.88(2)^{\circ},\;{\nu}=1907(1){\AA}^3,\;Z=2,\;{\rho}(calcd)=1.418\;gcm^{-3},\;{\lambda}(MoK{\alpha})=0.71069\;{\AA},\;{\mu}=26.25 cm^{-1},\;F(000)=831.97,\;T=295K,\;R=0.0977$ for 1332 significant reflections $[F_0>5{\sigma}(F_0)]$. There are two essentially equivalent molecules in the crystallographic asymmetric unit. Each molecule is octahedral with the bromide ligand trans to the alkylidyne carbon, the two cis-carbonyl ligands, and the bidentate TMEDA ligand.

• Journal of the Korean association of regional geographers
• /
• v.13 no.3
• /
• pp.235-253
• /
• 2007

The paper has its focus on comparative appraisal of sustainable development in korean metropolises. In reference to OECD, UNCSD, PCSD and BBR indicator lists, somewhat transformed 14 themes and 42 quantitative indicators were chosen in economic, social and environmental sector. In next step, for the standardization of the indicators the own value of each Metropolis was relatively appraised based on the mean value of each indicator of the metropolises. If necessary, the indicator which has negative characteristics was transformed into positive scale so as to compare all of the indicators with same scale direction. As a result, it was found out that Seoul and Ulsan, highly concentrated in specific economic sector, reveals high level of sustainable development in economic sector but not in environmental sector. Kwangju is diametrically opposed to the former case. In contrast to the generally low level of sustainable development of Pusan, Taegu and Incheon, the metropolis Taejeon shows equally high level of sustainable development in 3 sectors.

• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.19-24
• /
• 2014

PURPOSES : The study objective was to evaluate rheology and physical properties of SBS-modified warm-mix asphalt (WMA) binders in comparison with hot-mix asphalt (HMA) binders. METHODS : Four different SBS polymers were used to prepare polymer-modified asphalt (PMA) binders, and three different warm-mix additives (WAD) were used to prepare a total of 12 WMA PMA binders. The kinematic viscosity was measured at 115, $135^{\circ}C$. The PG was determined using DSR and BBR. The pass/fail (P/F) temperatures for high and low PG grading were evaluated for HMA PMA and WMA PMA binders. RESULTS : PG 76-22 binders could be prepared by modifying the base binder (PG 64-22) using 4.5 wt% of SBS. The kinematic viscosity (KV) of SBS PMA was increased by 3 times higher than that of base asphalt. The SBS PMA with WAD showed 10% lower KV than that of the normal SBS PMA at $115^{\circ}C$ The high P/F temperatures showed almost no difference between HMA PMA and WMA PMA binders. The high P/F temperature showed very high correlations with KV ($R^2$ > 0.97). The result of SBS modification caused increase of low P/F temperature by $2.7^{\circ}C$ on average. CONCLUSIONS : Since the PMA with WAD showed 10% lower KV than normal (HMA) PMA at $115^{\circ}C$, reducing PMA mixture temperature down to a WMA level was possible in this study. The higher KV binders showed the higher P/F temperature. There was almost no change in high P/F temperature due to the use of WAD. The SBS PMA, showing an increased low P/F temperature, might show somewhat poorer performance at low-temperature, even though the lower PG grade was staying at the same level, i.e., $-22^{\circ}C$.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.758-761
• /
• 2001

In this study, the nar promoter of E. coli was characterized to see whether the nar promoter cloned onto pBBR122 can be used as an expression promoter of gram negative microbes. For this purpose, a plasmid with lacZ gene expressing ${\beta}-galactosidase$ instead of the structural genes of nar operon in a gram negative host strain(Agrobacterium.tumefaciens) was used to simplify an assay of induction of the nar promoter. The following effects were investigated to find optimal conditions: methods of inducing the nar promoter, optimal nitrate concentration, maximally inducing the nar promoter, the amount of expressed ${\beta}-galactosidase$ and induction ratio(specific ${\beta}-galactosidase$ activity after maximal induction/specific ${\beta}-galactosidase$ activity before induction). The following results were obtained from the experiments: the growth of Agrobacterium with E.coli nar promoter was not much affected by nitrate concentration in the shake-flask; induction of nar promoter was optimal when Agrobacterium was grown in the presence of 1% nitrate ion at the beginning of culture and when overnight culture was completely grown in the shake-flask before being transferred to other shake-flask; the amount of ${\beta}-galactosidase$ per cell and per medium volume was maximal when Agrobacterium was grown under aerobic condition to $OD_{600}$ of 1.7; then the nar promoter was induced under microaerobic and anaerobic condition made by lowering dissolved oxygen level(DO). After 2-3h of induction in the YEP medium selected as a main culture medium, the specific ${\beta}-galactosidase$ activity became about 17,000 Miller units in the fermentor cluture.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.51-62
• /
• 2007

Recently, the pavement distresses in the bridge deck have seriously affected the durability of bridge deck and driver's safety. The existing asphalt materials have the limitations in reducing the pavement distresses of brides deck. To protect the bridge deck and withstand the high deflection, it is necessary to develop the asphalt materials with good fatigue resistance for bridge deck pavement. The asphalt binder combined with SBS and two other admixtures has been developed for improving the resistance to fatigue cracking, productivity, and workability for bridge deck pavement. Based on the various binder test results, the developed binder is found to be PG 70-34 indicating very higher resistance against fatigue cracking. Fatigue testing, wheel tracking testing, and moisture susceptibility testing have been conducted to evaluate the performance of asphalt mixtures developed in this study. Laboratory test results show that the developed asphalt material has three times higher fatigue lives than the typical modified asphalt mixture. Full scale accelerated testing was also performed on the typical asphalt mixture and newly developed asphalt mixture to evaluate the full scale performance of asphalt mixtures. Test results indicate that the length of cracking on the new materials is only 38% of the typical material at the 250,000 load repetitions.