• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.653-656
• /
• 1999

Effect of $Al_2O_3$ Additives on Microwave Dielectric Properties of $0.15(Ba_{0.85}Ca_{(0.15-y)}Mg_y)$-0.125 $Nd_2O_3-0.60TiO_2+10wt%Bi_zO_3$ (y=0.05, 0.08) Ceramics was investigated. To control of $\tau\;{f}$ on microwave dielectric properties of $0.15(Ba_{0.85}Ca_{(0.15-y)}Mg_y)$-0.125 $Nd_2O_3-0.60TiO_2+10wt%Bi_zO_3$ ceramics $Al_2O_3$ was doped in the composition range of 0 to 0.15 wt%. As a result, dielectric constant was decreased from 94 to 80 but $Q\cdot{f}_0$ value was increased from 4980 to 5210 GHz and temperature coefficient of resonant frequency can be controlled from +9 to -10$ppm^\circ{C}$ as an increase of$Al_2O_3$ doping concentration. Especially, a new microwave dielectric material having $\varepsilon\;_r=84,\;Q\cdot{f}_0=5120\;GHz\;and\;\tau_f=0\;ppm/^\circ{C}$ was obtained at $Al_2O_3$ doping concentration of 0.08 wt%.

• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.675-680
• /
• 1992

The purpose of this investigation was to study the stability of perovskite structure, the variation of electrical properties and a microstructure with varing amount of PbTiO3 additive in PZN-PT-BT system. The results are as follows: 1. The pyrochlore phase was reduced as the amount of PbTiO3 additive was increased and completely eliminated at 0.15PT in PZN-PT-BT system. 2. The aging rate was increased in proportion to tetragonality because the internal stress was increased in proportion to tetragonality. 3. On increasing the amount of PbTiO3 additive, the Curie temperature was increased in proportion to tetragonality. 4. As the amount of PT in the composition increase, the variation of dielectric constant was sharpened and the diffuseness of the transition decreased.

• 한국안전학회지
• /
• 제1권1호
• /
• pp.21-26
• /
• 1986

Gas sensing materials for detecting inflammable gas such as alcohol, propane, acetic acid, carbon monoxide, hydrogen were developed by utiliting $MgO-Cr_2O_3-TiO_2$ system. Between 30$0^{\circ}C$ and 50$0^{\circ}C$, reversible chemisorption becomes dominant and the electrical canduction of P-type semiconductive with the gas chemisorption. The ceramic sensor exhibits a high sensitivity to particular reducing gas such as alcohol, whereas propane and butane have little effect on the resistivity. The time response of adsorption is estimated to be about 20 sec. On the other hand, the desorption process, which corresponds to oxidation due to oxygen adsorption, take more than 60 sec. Thus the ceramic sensor can be used as a alcohol sensor in an ambient aunosphere. As the oxygen concentration is increased from 0.1 to 10 precent($10^3-10^6ppm$), the resistance decreases rapidly but stabilizes at higher concentration.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.359-364
• /
• 1991

The effects of Pb5Ge3O11 on the sinterbility and lattice variation of the semiconducting 0.15 mol% Y2O3 doped BaTiO3 have been investigated as functions of additive contents (from 0.25 mol% to 2.5 mol%) and sintering temperatures (from 110$0^{\circ}C$ to 130$0^{\circ}C$). As the amount of Pb5Ge3O11 increases, the sinterbility of BaTiO3 increases abruptly at around 115$0^{\circ}C$. During the sintering, the most of Pb+2 ions in additives penetrate into BaTiO3 lattices and Ge+4 ions present at grain boundaries. Therefore the c lattice of the BaTiO3 increases largely and then the tetragonality increases due to the diffusion of the Pb+2 ions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1692-1695
• /
• 1999

The nonohmic characteristics of ZnO-$Pr_6O_{11}$-CoO-based ceramic varistor doped with $Dy_2O_3$ in the range $0.0\sim2.0mol%$ sintered at $1300^{\circ}C$ and $1350^{\circ}C$ were investigated. 98.5 ZnO-$0.5Pr_6O_{11}$-1.0CoO varistor sintered at $130^{\circ}C$ exhibited higher nonlinear coefficient of 36 than the established Pr-based varistor. The four-component-system varistor such as 96.5 ZnO-$0.5Pr_6O_{11}$-1.0CoO-$2.0Dy_2O_3$ exhibited very highly nonohmic characteristics, which has nonlinear coefficient of 53.9. 98.5ZnO-$0.5Pr_6O_{11}$-1.0CoO varistor sintered at $1350^{\circ}C$, in contrast with that of $1300^{\circ}C$, exhibited approximately ohmic characteristics but nonlinear coefficient of varistor doped with 0.5mol% $Dy_2O_3$ showed higher nonlinear coefficient of probably 35. Consequently, it can be confirmed that $Dy_2O_3$ acted as additive of improvement on nonlinear coefficient. It is estimated that $Dy_2O_3$ will be used as additive of improvement on nonlinear coefficient to develop a goof ZnO varistor.

• 한국안전학회지
• /
• 제21권2호
• /
• pp.35-45
• /
• 2006

Cobalt catalysts for gas mask loaded on various supports such as $Al_{2}O_{3},\;TiO_{2}$, AC(activated carbon) and $SiO_{2}$ were used to examine influences of calcination temperatures and reaction temperatures for CO oxidation. $Co(NO_{3})_2{\cdot}6H_{2}O$ was used as cobalt precursor and the catalysts were prepared by incipient wetness impregnation. The catalysts were characterized using XRD, TGA/DTA, TEM, $N_{2}$ sorption, and XPS. For the catalytic activity, support was in the order of ${\gamma}-Al_{2}O_{3}>TiO_{2}>SiO_{2}>AC\;and\;Al_{2}O_{3}$. The catalytic activity at lower temperature than $80^{\circ}C$ showed that with the increase of reaction temperature, cobalt catalysts on ${\gamma}-Al_{2}O_{3},\;TiO_{2},\;AC\$ has the negative activation energy but that of $SiO_{2}$ was positive.

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.629-635
• /
• 1997

The effects of the annealing atmospheres(O2, N2) and sintering additives that Bi2O3 is a major composition on the microwave dielectric and sintering propertie of (1-x)CaTiO3-xLaAlO3 system were investigated. The annealing atmospheres and the increase of annealing time after sintering did not affect the relative dielectric constant($\varepsilon$r) and temperature coefficient of resonant frequency($\tau$f) of (1-x)CaTiO3-xLaAlO3 system. However, the Q.f0 values of (1-x)CaTiO3-xLaAlO3 were very sensitive to annealing atmospheres. As the annealing time increased under O2 atmosphere the Q.f0 values of (1-x)CaTiO3-xLaAlO3 enhanced untill 10 hrs in 0.3$\leq$x$\leq$0.6 region, but degraded over that time. The increasing rate of Q.f0 value increased wth increasing x. On the other hand, as the annealing time increased under N2 atmosphere the Q.f0 values were constant in x$\leq$0.6 region, increased gradually in x$\geq$0.7 region. When 0.97Bi2O3-0.03Al2O3 and 0.76Bi2O3-0.24NiO of 3wt% as sintering additives were added to (Ca0.5La0.5) (Ti0.5Al0.5)O3 (x=0.5) the sintering temperature of 1$600^{\circ}C$ was lowered to 140$0^{\circ}C$, and the relative dielectric constant($\varepsilon$r) and temperature coefficient of resonant frequency($\tau$f) were not nearly changed. The addition of 0.97Bi2O3-0.03Al2O3 and 0.76Bi2O3-0.24NiO of 3wt% to (Ca0.5La0.5)(Ti0.5Al0.5)O3 made the Q.f0 values to be lower about 15% and 34%, respectively.

• 멤브레인
• /
• 제14권4호
• /
• pp.312-319
• /
• 2004

졸겔법에 의해 Si(OC$_2$$H_5$/)$_4$-($CH_3$O)$_3$B-C$_2$$H_5$OH-$H_2O$계로부터 다공성의 SiO$_2$-B$_2$O$_3$ 막을 제조하였다. SiO$_2$-B$_2$O$_3$막의 특성을 BET, IR spectrophotometer, X-ray diffractometer, SEM 과 TEM을 사용하여 조사하였다. $700^{\circ}C$에서 얻어진 SiO$_2$-B$_2$O$_3$ 막의 평균 기공직경은 0.0048 $\mu\textrm{m}$이고, 표면적은 354.398 $m^2$/g이었으며, 입자의 크기는 7 nm인 무정형의 다공체이었다. SiO$_2$-B$_2$O$_3$ 막의 수소/질소 혼합 기체 분리 특성은 기체분리 압력을 달리하여 조사하였다. $25^{\circ}C$, ΔP 155.15cmHg에서 수소/질소 혼합 기체를 분리하여 본 결과 SiO$_2$-B$_2$O$_3$ 막의 수소에 대한 real separation factor($\alpha$)는 4.68이었다. 그리고 투과셀의 압력차(ΔP)값이 증가할수록 real separation factor($\alpha$), head separation factor($\beta$), tail separation factor((equation omitted))값이 증가하였다.

• 한국재료학회지
• /
• 제15권12호
• /
• pp.751-755
• /
• 2005

Fibrous $Al_2O_3-(m-ZrO_2)/t-ZrO_2$ composites having core/shell structure were fabricated by multi-extrusion process. The effect o volume fraction between core ($Al_2O_3-(m-ZrO_2)$) and shell ($t-ZrO_2$ was investigated to understand the relationship between microstructure and material properites, in which the volume fractions of core and shell were varied as 40:60, 50:50 and 60:40. The material properties o hardness and bending strength were increased as the volume fraction of core was increased, and their maximum values were about 1320 Hv and 750MPa, respectively. However, as the volume fraction of core increased, the values of relative density and fracture toughness were decreased from 97.1 to $96.5\%$ and from $6.5MPa{\cdot}m^{1/2}$ to $5.7MPa{\cdot}m^{1/2}$, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• 제18권E1호
• /
• pp.29-36
• /
• 2002

The selective catalytic reduction (SCR) reaction of promoter catalysts was investigated in this study. A pure anatase type of TiO$_2$ was used as support. Activation measurement of prepared catalysts was practiced on a fixed reactor packing by the glass bead after filling up catalysts in 1/4 inch stainless tube. The reaction temperature was measured by K-type thermocouple and catalyst was heated by electric furnace. The standard compositions of the simulated flue gas mixture in this study were as follows: NO 1,780ppm, NH$_3$1,780ppm, $O_2$1% and $N_2$ as balance gas. In this study, gas analyzer was used to measure the outgassing gas. Catalyst bed was handled for 1hr at 45$0^{\circ}C$, and the reactivity of the various catalyst was determined in a wide temperature range. Conversion of NH$_3$/NO ratio and of $O_2$ concentration was practiced at 1,1.5 and 2, respectively. The respective space velocity were as follows . 10,000, 15,000 and 17,000 hr-1. It was found that the maximum conversion temperature range was in a 5$0^{\circ}C$. It was also found toi be very sensitive at space velocity, $O_2$ concentration, and NH$_3$/NO ratio. We also noticed that the maximum conversion temperature of (W, Mo, Sn) -V$_2$O$_{5}$/TiO$_2$ catalysts was broad. Specially WO$_3$-V$_2$O$_{5}$TiO$_2$2 catalyst appeared nearly 100% conversion at not only above 30$0^{\circ}C$ ut also below 25$0^{\circ}C$. At over 30$0^{\circ}C$, NH$_3$ oxidation decreased with decrease of surface excess oxygen. In addition, WO$_3$-V$_2$O$_{5}$TiO$_2$ catalyst did not appear to affect space velocity, $O_2$ concentration, and NH$_3$/NO ratio.ratio.