• Journal of Magnetics
• /
• 제3권1호
• /
• pp.21-30
• /
• 1998

An artificially modulated magnetic Co/Pd multilayer is one of the promising candidates for high density magneto-optic (MO) recording media, due to large Kerr rotation angle in the wavelength of a blue laser beam. however, since multilayer structure, as well as amorphous structure, is a non-equilibrium state in terms of free energy and MO recording is a kind of thermal recording which is conducted aound Curie temperature (Tc) of the recording media, when the multilayer is used for the MO recording media, changes in the multilayer structure are occurred as the amorphous structure do. Therefore, the assessment of the structural stability in the Co/Pd multilayer is crucially important both for basic research and applications. As the parameter of the structural stability in this research, modulation amplitude and particle size of the Co/Pd multilayer are measured in terms of Ar sputtering pressure and heat treatment temperature. From the results of the research, we find out that the magnetic exchange energy in the structural changes of a magnetic multilayer structure and suggest the operating temperature range for MO recording in the Co/Pd multilayer for the basic research and applications, respectively.

• 한국광학회지
• /
• 제2권2호
• /
• pp.59-66
• /
• 1991

표면 플라즈몬 공명이 일어나는 공명각과 최적 두께를 여러 금속 박막에 대해 어드미턴스 다이어그램을 이용하여 계산하였으며, 표면 플라즈몬 공명에서 측정한 반사율과 이론치를 곡선 맞춤하여 은박막과 알루미늄 박막의 광학 상수와 두께를 결정하였다. 한 파장에 대해 두 개의 해가 존재하므로 알곤 레이저의 두 파장에서 같은 두께를 갖는 해를 광학 상수의 유일 해로 선택하였으며, 금속 박막을 공기 중에 노출시킬 경우, 박막의 표면 변화에 의해 이동된 표면 플라즈몬 공명으로부터 변화된 금속 박막의 광학 상수를 결정하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.678-683
• /
• 2003

Mixers are used in various industrial fields where it is necessary to intimately mix two reactants in a short period of time. However, despite their widespread use, complex unsteady flow characteristics of industrial mixers are not systematic investigated. The present study aimed to clarify unsteady flow characteristics induced by various impellers in a tank. Impellers are pitched blade turbine and neo-hydrofoil turbine types. A high speed CCD camera and an Ar-Ion laser for illumination were adopted to clarify the time-dependent flow characteristics of the mixers. The rotating speed of impellers increased from 6Hz to 60Hz by 6Hz. The maximum velocity around PBT impeller is higher than the hydrofoil type impeller. These two types of turbine shows that typical flow characteristics of axial turbine and suitable for mixing high -viscosity materials.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권3호
• /
• pp.75-80
• /
• 2001

Holographic polymer dispersed liquid crystals (HPDLCs) have fabricated by irradiating an Ar-ion laser ( ${\lambda}$=514nm) at various intensity on LC/acrylate monomer mixtures which were sandwitched between two ITO coated glass plates. Monomer systems were composed of dipentaerythritol-hydroxy penta acrylate (DPHPA, f=5)/monofunctional acrylate monofunctional monomers. The LC used in this system was E7 (BL001, Merck). Gratings were fabricated by periodic interference of twobeams. Reflection efficiency-irradiation intensity-monomer type relationships were obtained from the UV-visible spectra of the HPDLC films. Peaks were found at a bit smaller wavelength than 514nm, due to the shrinkage of mixture volume upon polymerization. Real time measurements of diffraction efficiency have been obtained according to monomer types and LC contents.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권3호
• /
• pp.63-69
• /
• 2001

Holographic transmission gratings were performed by an Ar-laser( ${\lambda}$=514nm) intensity, the ratio fo LC contents to the surfactant. The addition of the surfactant to the LC and pre-polymer systems causes the droplet to maintain the ideal size at the high fraction(over 40wt%) of the LC contents that induce the films to be fabricated with high diffraction efficiency than that of no surfactant series. The image of these films was examined using a charge coupled device (CCD). We also studied the angular selectivity plots which support the important role in the multiplexer channel (MUX). Eventually, we showed the reconstructive optical image recorded in this transmission mode of HPDLCs.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.901-907
• /
• 2000

As the minimum feature size for making ULSI approaches the wavelength of light source in optical lithography, the aerial image is so hardly distorted because of the optical proximity effect that the accurate mask image reconstruction on wafer surface is almost impossible. We applied the Optical Proximity Correction(OPC) on isolated patterns assuming Attenuated Phase Shift Mask(APSM) as well as binary mask, to correct the widening of isolated patterns. In this study, we found that applying OPC to APSM shows much better improvement not only in enhancing the resolution and fidelity of t도 images but also in enhancing the process margin than applying OPC to the binary mask. Also, we propose the OPC method of APSM for isolated patterns, the size of which is less than the wavelength of the ArF excimer laser. Finally, we predicted the resolution limit of optical lithography through the aerial image simulation.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.43-44
• /
• 2002

A pulsed jet was measured with high-definition 3D-PTV technique. The measurement system consists of three CCD cameras, Ar-ion laser, an image grabber and a host computer. Two fitness functions were introduced in a genetic algorithm in order to enhance the correspondences of the particles. One was based on a concept of the continuum theory and the other one was based on a minimum distance error. The head vortex of the jet was visualized by LIF and was reconstructed by the constructed high-resolution 30-PTV system for comparisons.

• 기계저널
• /
• 제37권12호
• /
• pp.47-52
• /
• 1997

엑사이머 레이저는 Ar, Kr, Xe등의 희귀가스와 F, Cl과 같은 할로겐족 가스를 혼합하여 방전여기에 의해 발진되는 157-350mm 파장대에 자외선 레이저이다. UV레이저를 이용하면 종래의 기계 가공 공정으로 실현할 수 없는 극소형 및 초정밀의 기계구조, 센서 또는 액츄에이터를 비접촉식으로 할 수 있고 가공시 열손상이 거의 없다. 최근 제품의 소형화 및 박막화 추세에 따른 미세가공 기술의 급속한 발전을 살펴보면, Uv레이저를 이용한 실리콘 표면의 도핑(dopping)에 관한 연구, 미소전자 패키징에 레이저를 이용하는 방법뿐만 아니라, 레이저 유도에 의한 금속과 혼합물의 물질전달 현상을 활용한 마이크로 패터닝에 관한 연구도 진행되고 있다. 본 글에서는 여러가지 응용분야 중 레이저 어블레이션, 레이저유도화학에칭, 레이저 PVD등에 대하여 기술한다.

• Bulletin of the Korean Chemical Society
• /
• 제6권1호
• /
• pp.29-32
• /
• 1985

Normal modes of crystalline orthorhombic sulfur belonging to the space group $D_{2h}$-Fddd, have been evaluated by taking the lowest temperature phase in the solid. Normal modes are obtained by the valence force field with modified force constants and a quantitative description of the mode is adjusted by the potential energy distribution. Since the full crystal system of orthorhombic sulfur is so large, we intended to calculate the normal modes simply by constructing the imaginary box made by the infinite mass boundary. And the Raman experiment is done by using the more powerful Ar-Kr gas laser with lowering the temperature to ${\sim}10^{\circ}K$.

• Bulletin of the Korean Chemical Society
• /
• 제19권9호
• /
• pp.947-951
• /
• 1998

$K_2NiF_4$-type layered compounds of the ($C_nH_{2n+1}NH_3)_2SnCl_4$ (n=2, 4, 6, 8, and 10) system have been synthesized from a stoichiometric mixture of $SnCl_2$ and alkyl ammonium salt using a low temperature solution technique under the inert atmosphere condition. Their crystal structures are assigned to the orthorhombic system by X-ray powder diffraction analysis. The a and b cell parameters show small changes. However, the c parameter is varied significantly according to the increment of alkyl chains of the organic layer which is located between inorganic layers in the compounds. The conformational phase transitions of the compounds are studied by the DSC in the temperature range of 300 to 500 K. FT-IR and Raman spectra are analyzed in the ranges of 1300 to 4000 cm-1 and of 50 to 360 $cm^{-1}$ with Ar-laser (λ=514.5 nm) excitation, respectively. Photoluminescence phenomena are observed for some compounds. The bond-length of Sn-Cl is determined by the EXAFS spectroscopic analysis.