• 제목/요약/키워드: $Al_2O_3

검색결과 6,307건 처리시간 0.035초

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

PEO법으로 (Si,Mn)-HA 코팅된 치과 임플란트용 Ti 합금의 생체적합성 및 표면특성 (Biocompatibility and Surface Characteristics of (Si,Mn)-HA Coated Ti-Alloy by Plasma Electrolytic Oxidation)

  • 강정인;손미경;최한철
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2017년도 춘계학술대회 논문집
    • /
    • pp.83-83
    • /
    • 2017
  • 생체재료의 표면은 이식과 동시에 생체계면의 역할을 하게 되어, 일련의 생물학적 반응이 시작되고 진행되는 중요한 장소가 된다. 초기에 생체계면에서 일어나는 단백질 흡착이나 염증반응을 비롯한 생물학적 반응들은 궁극적으로 임플란트의 성패를 좌우할 만큼 중요하다. 골융합을 개선하기 위한 다른 방법으로 생체불활성의 타이타늄 (Ti)과 골조직의 능동적인 반응을 이루기 위해 생체활성 표면을 부여함으로서 계면에서의 골형성 반응을 증진시키는 방법이 이용된다. 생체불활성의 Ti과 Ti합금은 골조직과 직접적인 결합을 이루지 못하므로, 골조직과의 반응을 향상하기 위해 여러 종류의 생체활성 재료를 코팅하는 방법이 연구되어 왔고, 이 중 생체의 변화와 가장 유사한 하이드록시아파타이트 코팅이 가장 대중적인 방법으로 사용되었으며 이는 초기 골형성을 촉진하는 것으로 알려졌다. 치과용 임플란트의 표면형상과 화학조성이 골 융합에 영향을 미치는 가장 중요한 인자이므로 최근의 연구동향은 이들 두 가지 표면특성을 결합함으로서 결과적으로 최적의 골세포반응을 유도하고, 골융합 후 골조직과의 micromechanical interlocking에 의해 임플란트의 안정성에 중요한 역할을 하는 마이크론 단위의 표면조도와 표면 구조를 유지하면서, 부가적으로 골 조직 반응을 능동적으로 개선할 수 있는 생체활성 성분을 부여하여 골 융합에 상승효과를 이루기 위한 표면처리법에 관해 많은 연구가 요구되어지고 있다. 따라서 골을 구하는 원소인 망간과 실리콘으로 치환된 하이드록시아파타이트를 플라즈마 전해 산화법으로 코팅하여 세포와 잘 결합할 수 있는 표면을 제공함으로써 골 융합과 치유기간을 단축시킬 수 있을 것으로 사료된다. 실험방법은 시편은 치과 임플란트 제작 합금인 Ti-6Al-4V ELI disk (grade 5, Timet Co., USA; diameter, 10 mm, thickness, 3 mm)이며, calcium acetate monohydrate, calcium glycerophosphate, manganese(II) acetate tetrahydrate, sodium metasilicate을 설계조건에 따라 혼합 제조된 전해질 용액을 이용하여 플라즈마 전해 산화법으로 표면 코팅을 실시하였다. 각 시편의 플라즈마 전해시 전압은 280V로 인가하였고, 전류밀도는 70mA로 정전류를 공급하여 해당 인가전압 도달 후 3분 동안 정전압 방식을 유지하였다. 코팅된 피막 표면을 주사전자현미경과 X-선 회절분석을 통하여 미세구조 및 결정상을 관찰하였다. 또한 코팅된 표면의 생체활성 평가는 정량적으로 평가하기 위해 동전위시험과 AC 임피던스를 통하여 시행하였다. 분극거동을 확인하기 위해 potentiostat (Model PARSTAT 2273, EG&G, USA)을 이용하여 구강 내 환경과 유사한 $36.5{\pm}1^{\circ}C$의 0.9 wt.% NaCl에서 실시하였다. 전기화학적 부식 거동은 potentiodynamic 방법으로 조사하였고 인가전위는 -1500 mV에서 2000 mV까지 분당 1.67 mV/min 의 주사속도로 인가하여 시험을 수행하였다. 임피던스 측정은 potentiostat (Model PARSTAT 2273, EG&G, USA)을 이용하였으며, 측정에 사용한 주파수 영역은 10mHz ~ 100kHz 까지의 범위로 하여 조사하였고 ZSimWin(Princeton applied Research, USA) 소프트웨어를 사용하여 용액의 저항, 분극 저항 값을 산출하였다. 망간의 함량이 증가할수록 불규칙한 기공을 보였으며, 실리콘은 $TiO_2$ 산화막 형성을 저해하는 경향을 확인할 수 있었다. 단독으로 표면을 처리한 경우보다 두 가지 원소를 이용해 복합 표면처리를 시행한 경우가 내식성이 좋아 임플란트과의 골 유착에 긍정적인 영향을 미칠 것으로 사료된다.

  • PDF

Dextranase 함유 구강 세정액의 치태 억제 및 치은염 예방 효과에 관한 임상적 연구 (A Clinical Trial of Dextranase-Containing Mouthwash on the Inhibition of Plaque Formation and Gingivitis)

  • 송우성;손은주;김도만;정현주
    • Journal of Periodontal and Implant Science
    • /
    • 제31권2호
    • /
    • pp.371-388
    • /
    • 2001
  • A novel glucanhydrolase(DXAMase) from a mutant of Lipomyces starkeyi(KSM 22) has been shown effective in hydrolysis of mutan, reduction of mutan formation by Streptococcus mutans and removal pre-formed sucrose-dependentadherent microbial film and DXAMase has been strongly bound to hydroxyapatitie. These in vitro properties of Lipomyces starkeyi DXAMase are desirable for its application as a dental plaque control agent. This study was performed to determine the adjunctive oral hygiene benefits and safety of dextranase(Lipomyces starkeyi KSM 22 DXAMase)-containing mouthwash when used alongside normal tooth-brushing. This 6-month clinical trial was placebo-controlled double-blind design evaluating 1U/ml dextranase mouthwash and 0.12% chlorhexidine mouthwash. A total 39 systemically healthy subjects, who had moderate levels of plaque and gingivitis were included. At baseline, 1, 3 and 6 months, subjects were scored for plaque accumulation(Turesky modification of Quingley-Hein's plaque index), gingivitis status($L\ddot{o}e$ and Silness gingival index), and tooth stain(Area and severity index system by Lang et al). Additionally, oral mucosal examinations were performed and subjects questioned for adverse symptoms. Two weeks after pre-experiment examinations and a professional prophylaxis, the subjects provided with allocated mousewash and instructed to use 20-ml volumes for 30s twice daily after toothbrushing. All the groups showed significant increase in plaque accumulation since 1 month of experiment. During 6 months' period, the Dextranase mouthwash group showed the least increase in plaque accumulation, compared to the Chlorhexidine mouthwash and placebo groups. As for gingival inflammation, all the groups showed significant increase during 6 months of experiment. The Experimental group(Dextranase mouthwash) also showed the least increase in gingival index score, compared to the Positive control(Chlorhexidine mouthwash)as well as the Negative control(placebo)groups. Whereas the tooth stain was increased significantly in the Positive control group, compared to the baseline score and the Negative controlgroup since 3 months of mouthrinsing. It was significantly increased after 6 months in the Experimental group, still less severe than the Positive control group. As for the oral side effect, the Experimental group showed less tongue accumulation, bad taste, compared to the Positive control group. From these results, mouthrinsing with Lipomyces starkeyi KSM 22 dextranase provided adjunctive benefits to toothbrushing, comparable to 0.12% chlorhexidine mouthwash in inhibition of plaque accumulation and gingival inflammation and local side effects were if anything less frequent and less intense than chlorhexidine, with long-term use of the mouthwash. All data had provided positive evidence for Lipomyces starkeyi KSM 22 dextranase as an antiplaque agent and suggested that further development of dextranase formulations for plaque control are warranted.

  • PDF

고색재현성 디스플레이 응용을 위한 고안정성 양자점 함유 유리색변환소재

  • 정운진;이한솔;이진주
    • 인포메이션 디스플레이
    • /
    • 제23권4호
    • /
    • pp.12-21
    • /
    • 2022
  • 반도체 기반 양자점 (QD)소재와 CsPbX3 (X=Cl, Br, I)기반 perovskite 양자점 또는 나노결정 소재(PNC)는 매우 우수한 양자효율과 좁은 발광 선폭으로 고색재현성 디스플레이 색변환 소재 또는 발광 소재로서 각광을 받고 있다. 그러나, 기존 화학적 합성법을 통해 제조되는 QD 및 PNC 소재는 취약한 열 및 화학적 안정성으로 인해 장기 내구성의 개선이 요구된다. 이들 QD 및 PNC 소재는 모두 완전 무기 소재인 산화물 기반 유리 소재내에 생성이 가능하며, 이를 통해 장기 내구성을 근본적으로 개선할 수 있다. 반도체 기반 QD 함유 유리소재 (QDEG)의 경우, 유리 내 core/shell 구조를 가진 QD의 생성으로 양자효율의 향상이 가능했으나, 콜로이드 기반 양자점 (cQD)과 달리 다중 shell의 형성이 어려워 양자효율이 제한되고, 발광 선폭이 넓어 고색재현성 디스플레이용 색변환 소재로 적용되기에는 아직 한계가 있다. 한편, Perovskite 양자점 (또는 나노결정) 함유 유리소재 (PNEG) 소재는 QDEG과 달리 콜로이드 기반의 PNC (c-PNC)가 가지는 우수한 양자효율과 20 nm 수준의 좁은 선폭을 유리 내에서도 가지며, c-PNC 대비 열적, 화학적 및 광학적 안정성이 획기적으로 향상되어 실질적인 응용 가능성을 높이고 있다. 특히, 일반적인 용융-급랭법으로 제조하여 대량생산에 용이하고, 분말 또는 판상 등 다양한 형태로의 제작이 가능한 장점이 있다. 현재까지 제조된 PNEG의 최대 PL-QY는 450 nm 여기 시 녹색 및 적색에서 약 60% 수준이며, Al2O3 분말을 이용할 경우 최대 80% 수준까지 달성이 가능하다. 또한, PNEG과 blue LED를 이용하여 백색 LED를 구현할 경우 color filter를 적용하지 않을 때, NTSC 대비 최대 약 130 % 수준의 높은 색재현 영역을 보여 주고 있으며, 실제 LCD용 BLU로 적용 시 기존 상용 c-QD 소재와 동등 이상의 색재현 영역을 보이고 있어, 실질적인 응용 가능성이 매우 높음을 확인하였다. PNEG의 상업적인 응용을 위해서는 몇 가지 추가적인 연구 개발이 필요하다. 기존 c-QD 또는 c-PNC는 나노 수준 크기의 입자가 액상에 분산된 형태로 입도 제어가 용이하나, PNEG의 경우 분말 제조 시 유리 형성 후 분쇄를 통해 제조되며, 입도가 대개 수십 ㎛ 이하로 작아질 경우 PL-QY가 저하되어, 향후 잉크젯 공정 응용을 위해서는 고효율의 분말 제조공정 개발이 필요하다. 또한, 유리 소재의 경우 절연체로서 기존 QD 소재 대비 electro-luminescence(EL) 소자의 활성층으로 사용하는데 제약이 있어 PNEG을 이용한 EL 소자 제작에 대한 연구도 필요하다. 마지막으로, 기존 c-PNC 소재와 같이 Pb가 함유되지 않은 PNEG 소재의 개발이 선결되어야 할 것으로 판단된다. 이와 같은 해결 과제들에도 불구하고, PNEG 소재는 기존 c-QD 소재 대비 매우 우수한 안정성을 기반으로 고품위 고색재현 디스플레이용 색변환 소재로서 다양한 응용에 활용될 수 있을 것으로 기대된다.

우리나라 주요토양중(主要土壤中) 인산(燐酸)의 특성(特性)에 관(關)한 연구(硏究) -I. 무기태인산(無機態燐酸)의 분화정량치(分畵定量値)를 중심(中心)으로 (The Characteristics of phosphorus in major Korean soils. -I. The characteristics of inorganic phosphorus)

  • 홍정국;홍종운
    • 한국토양비료학회지
    • /
    • 제10권1호
    • /
    • pp.13-22
    • /
    • 1977
  • 우리나라 주요토양(主要土壤)에 있어서 인산(燐酸)이 어떠한 형태(形態)로 분포(分布)하고 있으며, 그 토양인산(土壤燐酸)의 특성(特性)이 어떠한지를 밝히고 나아가 인산질자원(燐酸質資源)을 합리적(合理的)으로 사용(使用)하기 위한 기본적(基本的)인 정보(情報)를 얻고저 본시험(本試驗)을 실시(實施)했든바, 그 중(中)에서 무기태인산(無機態燐酸)에 관(關)한 연구결과(硏究結果)는 다음과 같다. 1. 일반적(一般的)으로 대부분(大部分)의 인산(燐酸)은 무기태(無機態)로 존재(存在)하며, 경작지(耕作地)는 미경지(未耕地)에 비(比)해 무기태(無機態)로 존재(存在)하는 인산비율(燐酸比率)이 더 높은 것으로 나타났다. 유기인산(有機燐酸)의 비율(比率)은 미경지(未耕地)보다 경지(耕地), 전(田)보다 답(畓)에서 더 높았다. C/P율(率)은 경지(耕地)보다 미경지(未耕地)에서 매우 크며, 그 비율(比率)과 인산지력(燐酸地力)과의 관계(關係)를 추측(推測)되었다. 2. 무기태인산(無機態燐酸)의 일반적(一般的)인 분포(分布)는 Fe-P>Al-P>Apatire-P>Ca-P의 순(順)이었다. 미경지(未耕地)에서는 모암(母岩)의 영향(影響)이 잘 반영(反影)돼 있으며, 이 경향(傾向)은 전(田)으로 이용(利用)되고 있는 토양(土壤)에 까지 다소(多少) 나타났으나, 답(畓)에서는 거의 똑같은 분포상태(分布狀態)가 나타났다. 3. 일반적(一般的)으로는 미경지(未耕地) 및 전토양(田土壤)에서 Lancaster법(法)으로 침출(浸出)된 인산(燐酸)이, 답(畓)에서는 Olsen법(法)에 의(依)한 침출인산(浸出燐酸)이 가장 높았다. Ca-P, Al-P는 Truog법(法), Lancoster법(法), Olsen법(法)에 의(依)한 유효인산(有効燐酸)과, Fe-P는 Olsen법(法)에 의(依)한 유효인산(有効燐酸)과 깊은 상관관계(相關關係)를 보였다. 4. 인산흡수계수(燐酸吸收係數)와 무기태인산(無機態燐酸) 및 유효인산(有効燐酸) 사이에 깊은 상관관계(相關關係)가 인정(認定)되었다.

  • PDF

도시.농촌 지역 초등학생의 가족환경, 건강행위 및 건강상태에 관한 비교 (Comparision of Family Environment, Health Behavior and Health State of Elementary Students in Urban and Rural Areas)

  • 배연숙;박경민
    • 지역사회간호학회지
    • /
    • 제9권2호
    • /
    • pp.502-517
    • /
    • 1998
  • This research intends to survey family environment, health behavior and health status of the students in urban-rural elementary schools and analyze those factors comparatively, and use the result as basic material for school health teacher to teach health education in connection with family and regional areas. It also intends to improve a pupil's self-abilitiy in health care. The subjects involve 2,774 students of urban elementary schools and 583 student in rural ones, who were selected by means of a multi -stage probability sampling. Using the questionnaire and school documents, we collected data on family environment, health behavior and health status for 19 days. Feb. 2nd 1998 through Feb. 20th 1998. The R -form of Family Environment Scale (Moos, 1974) was used in the analysis of family environment(Cronbach's Alpha =0.80). Questionnaires of Health Behavior in School-aged children used by the WHO in Europe(Aaro et al., 1986) and the ones developed by the Health Promotion Committee of the Western Pacific(WHO, 1995)(adapted by long Young-suk and Moon Young-hee(1996)) were used in the analysis of health behavior, as well documents on absences due to sickness, school health room-visits, levels of physical strength, height, weight and degree of obesity were used to determine health status. In next step, We used them with an $X^2$-test, t-test, Odds Ratio, and a 95% Confidence Interval. 1. In two dimensions of three, family-relationship (t=3.41, p=0.001) and system -maintenances(t= 2.41, p=0.0l6) the mean score of urban children were significantly higher than those of rural ones. In the personal development dimension however, there was little significant difference. Assorting family environment into 10 sub-fields and analyzing them, we recognized that urban children were superior to rural children in the sub-fields of expressiveness (t =3.47, p=0.001), conflict (t=0.48, p=0.001), active-recreational orientation (t = 1.97, p=0.049) and organization (t=4.33, p=0.000). 2. Referring to the Odds Ratios of urban-rural children's health behaviors, urban children set up more desirable behavior than rural children wear ing safety belts (Odds Ratio =0.32, p=0.000), washing hands after meals(Odds Ratio = 0.43, p= 0.000), washing hands after excreting (Odds Ratio = 0.39, p=O.OOO), washing hands after coming - home ( Odds Ratio = 0.75, p = 0.003), brushing teeth before sleeping(Odds Ratio =0.45, p=0.000), brushing teeth more than once a day (Odds Ratio =0.73, p=0.0l2), drinking boiled water (Odds Ratio = 0.49, p=0.000), collecting garbage at home(Odds Ratio=0.31, p=0.000) and in the school(Odds Ratio =0. 67, p=0.000). All these led to significant differences. As to taking milk(Odds Ratio = 1.50, p=0.000), taking care of eyesight(Odds Ratio=1.41, p=0.001) and getting physical exercise in(Odds Ratio = 1.33, p=0.0l9) and outside the school(Odds Ratio = 1.32, p=0.005), rural children had more desirable behavior which also revealed a significant difference. There was little significant difference in smoking, but the smoking rate of rural children(5.5%) was larger than that of urban children(3.9%). 3. Health status was analyzed in terms of absences, school health room-visits, levels of physical strength, and the degree of obesity, height and weight. Considering Odds Ratios of the health status of urban-rural children, the health status of rural children was significantly better than that of the urban ones in the level of physical strength(t=1.51, p=0.000) and the degree of obesity(t=1.84, p=0.000). The mean height of urban children ($150.4{\pm}7.5cm$) is taller than that of their counterparts($149.5{\pm}7.9$), which revealed a significant difference (t =2.47, p=0.0l4). The mean weight of urban children($42.9{\pm}8.6kg$) is larger than that of their counterparts($41.8{\pm}9.0kg$), which was also a significant difference(t=2.81, p=0.005). Considering the results above, we can recognize that there are significant differences in family environment, health behavior, and health status in urban-rural children. These results also suggestion ideas for health education. What we would suggest for the health program of elementary schools is that school health teachers should play an active role in promoting the need and importance of health education, develop the appropriate programs which correspond to the regional characteristics, and incorporate them into schools to improve children's ability to manage their own health management.

  • PDF

TCO 박막의 결정 구조 및 표면 특성에 따른 OLED 소자의 특성

  • 이봉근;이유림;이규만
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.183-183
    • /
    • 2009
  • OLED소자의 양극재료로써 현재는 산화인듐주석(ITO : indium tin oxide) 박막이 널리 이용되고 있다. 그러나 낮은 전기 비저항과 높은 투과도를 갖는 ITO 박막을 얻기 위해서는 $300^{\circ}C$ 이상의 고온에서 성막되어야 하며, 원료 물질인 인듐의 수급량 부족으로 인한 문제점과 독성, 저온증착의 어려움, 스퍼터링 시 음이온 충격에 의한 막 손상으로 저항의 증가의 문제점이 있고, 또한 유기발광소자의 투명전극으로 쓰일 경우에 유기물과의 계면 부적합성, 액정디스플레이의 투명전극으로 사용될 경우에 $400^{\circ}C$정도의 놓은 온도와 수소 플라즈마 분위기에서 장시간 노출 시 열화로 인한 광학적 특성변화가 문제가 된다. 이러한 문제점을 지닌 ITO 박막을 대체할 수 있는 물질로 산화 인듐아연(lZO) 박막이 많은 각광을 받고 있다. IZO(Indium Zinc Oxide) 박막은 저온 ($100^{\circ}C$ 이상)에서 증착이 가능하고 추가적인 열처리 없이도 가시광 영역에서 90% 이상의 광 투과도와 ${\sim}10^{-4}{\Omega}cm$ 이하의 낳은 전기 비저항을 갖는 것으로 알려져 있다. 이러한 IZO박막은 성막 후 고온의 열처리 과정이 필요 없기 때문에 폴리카보네이트와 같은 유기물 기판을 사용하여 제작 가능한 유연한 평판형 표시 소자의 제작에도 적용될 수 있다. IZO(Indium Zinc Oxide) 박막은 상온 공정에서도 우수한 전기적, 광학적, 표면 특성을 나타낼 뿐만 아니라 양극재료로써 높은 일함수를 가지고 있어 고효율의 유기 발광 소자를 구현하는데 유리한 재료라 판단된다. 본 연구에서는 TCO 박막의 면 저항과 표면 거칠기가 OLED 소자의 성능에 미치는 영향을 조사하였다. R.F Magnetron Sputtering을 이용하여 투명 전도막을 성막 형성 하였으며, 기판온도와 증착과정에서 주입되는 산소, 수소의 유랑 변화가 박막의 구조적, 전기적 특성에 어떠한 영향 미치는 것인가를 자세히 규명하였다 ITO 와 IZO박막은 챔버 내 다양한 가스 분위기(Ar, $Ar+O_2$ and $Ar+H_2$) 에서 R.F Magnetron Sputtering 방법으로 증착했다. TCO박막의 구조적인 이해를 돕기 위해서 X-ray diffraction 과 FESEM으로 분석했다. 광학적 투과도와 박막의 두께는 Ultraviolet Spectrophotometer(Varian, cary-500)와 Surface profile mersurement system으로 각각 측정하였다. 면저항, charge carrier농도, 그리고 TCO박막의 이동성과 길은 전기적특성은 Four-point probe와 Hall Effect Measurement(HMS-3000)로 각각 측정한다. TCO 박막의 표면 거칠기에 따른 OLED소자의 성능분석 측면에서는 TCO 박막의 표면 거칠기 조절을 위해 photo lithography 공정을 사용하여 TCO 박막을 에칭 하였다. 미세사이즈 패턴 마스크가 사용되고 에칭의 깊이는 에칭시간에 따라 조절한다. TCO박막의 표면 형태는 FESEM과 AFM으로 관찰하고 그리고 나서 유기메탈과 음극 전극을 연속적으로 TCO 박막위에 증착한다. 투명전극으로 사용되는 IZO기판 상용화를 위해 IZO기판 위에 $\alpha$-NPB, Alq3, LiF, Al순서로 OLED소자를 제작하였다. 전류밀도와 전압 그리고 발광과 OLED소자의 전압과 같은 전기적 특성은 Spectrometer (minolta CS-1000A) 에 의하여 I-V-L분석을 했다.

  • PDF

오산 수청동 유적 부장 유리구슬의 전개양상 (Changing Process of the Glass Beads from Osan Sucheong Site in Gyeonggi-do, Korea)

  • 이민희;김나영;김규호
    • 보존과학회지
    • /
    • 제33권5호
    • /
    • pp.331-344
    • /
    • 2017
  • 본 연구에서는 오산 수청동 유적에서 확인된 10가지 색상 중 다수를 차지하는 적갈색, 벽색, 감청색을 연구시료로 선정하여 화학 조성을 중심으로 각 색상별 유형을 분류하고 이에 따른 시기별 전개 양상을 살펴보았다. 유형 분류한 결과, 적갈색과 감청색은 5가지, 벽색은 4가지 유형으로 구분된다. 이를 출토 유구의 시기별로 살펴볼 때, 적갈색은 2가지, 벽색과 감청색은 1가지 유형이 시기의 연속성을 보여 각 색상의 주된 유형으로 판단된다. 주된 유형은 산화알루미늄($Al_2O_3$)의 안정제 함량이 높은 소다유리군인 공통적 특징을 보여 본 유적 조영집단은 지속적으로 유리구슬을 교역한 경로를 가지고 있었을 것으로 추정된다. 또한 오산 수청동 유적은 4세기 후엽 유구에서 다양한 유형이 확인되어 이전시기에 비하여 다양한 유통 경로를 통해 유리구슬이 유입되었을 가능성이 높다고 할 수 있다.

우리나라 남부지역(南部地域) 화강편마암질(花崗片麻巖質) 삼림토양(森林土壤)의 토양생성(土壤生成) (Pedogenesis of Forest Soils(Kandiustalfs) Derived from Granite Gneiss in Southern Part of Korea)

  • 조희두
    • 한국산림과학회지
    • /
    • 제86권2호
    • /
    • pp.186-199
    • /
    • 1997
  • 화강편마암질(花崗片麻巖質) 삼림토양(森林土壤)은 우리나라 국토면적(國士面積)의 1/3에 해당(該當)한다. 이 논문은 우리나라 남부지역에 있는 전남 순천시 소재 화강편마암질(花崗片麻巖質) 삼림토양(森林土壤)의 풍화(風化) 과정(過程)과 1차광물(一次鑛物)이 2차광물(二次鑛物)인 점토광물(粘土鑛物)로 풍화변성(風化變成)하는 광정(過程)에 대하여 연구(硏究)하였다. 이 삼림토양(森林土壤)은 많은 양(量)의 푸오하(風化) 흑운모(黑雲母)와 같은 Ferromagnesian mineral을 함유하고 있으며 풍화(風化)가 잘된 토양(土壤)으로서 강산성(强酸性)이고 유기물(有機物)의 함량(含量)이 적으며 CEC 값이 낮다. 토양단면 Bt층에는 점토광물(粘土鑛物)의 함량(含量)이 C층 보다 배(倍)나 많고 O층은 토층(土層)이 엷고 분해된 식물유휴(植物遺休)가 적으며 다공성(多孔性)으로서 Granic fabric이고 Moder humus의 토양미세형태학적(土壤微細形態學的)인 특징(特徵)을 가지고 있다. E층의 Related distribution pattern은 Enaulic이며 많은 양(量)의 미사(微砂)를 함유(含有)하고 있으나 모래량은 Bt, C층에 비하여 매우 적은 것이 특징(特徵)이다. Bt, C층에서 토양미세형태학적(土壤微細形態學的)인 특징(特徵)으로 볼 수 있는 공극(空隙)에서 Multilaminated clay coating과 Infilling을 볼 수 있으며 토양(土壤)의 색(色)을 붉게 해주는 Ferriargillan이 흑운모(黑雲母)로부터 분리(分離)되어 형성(形成)된다. Bt층에서 점토(粘土)의 함량이 높은 것은 점토(粘土)가 운반 집적된 것은 물론 풍화(風化) 원위치(原位置)에서 강력(彈力)한 풍화작용(風化作用) 결과(結果)에서 비롯된 것이다. 편광현미경과 SEM으로 관찰한 바 토양생성과정(土壤生成過程)중 아주 특이한 것은 흑운모(黑雲母)로부터 산화철(酸化鐵)의 형성(形成)이며, Tubular halloysite의 형성(形成)과 두가지 형태의 흑운모(黑雲母) 풍화(風化)모델 (Wedge weathering과 Layer weathering)의 확인(確認)되었다. 흑운모(黑雲母) 풍화(風化)에서 2차광물(二次鑛物)인 산화철(酸化鐵)이 흑운모(黑雲母) 표면(表面)에 두껍게 입혀지는 것이 특징(特徵)이며 점토광물(粘土鑛物)의 TEM 관찰(觀察)로 밝혀진 바, synthetic hematite의 존재(存在)가 확인(確認)되었다. 점토(粘土)의 화확분석(化學分析)에서 많은 양의 Ca, Na의 유실(流失)을 확인(確認)할 수 있었으며 상당량(量)의 Fe와 Al 이온이 유리(遊離)되어 있음을 밝힐 수 있었다. 점토(粘土)의 XRD에 의하여 운모(雲母)가 Kaolinite, Vermiculite-kaolinite intergrade, Hematite, Gibbsite 등 점토광물(粘土鑛物)로 변성됨을 확인(確認)할 수 있었으며 한편 Halloysite는 다른 1차광물(一次鑛物)에서 풍화형성(風化形成)된다는 것을 알 수 있었다. 또 풍화(風化)가 되지 않은 약간의 Dioctahedral mica의 존재(存在)를 확인(確認)할 수 있었다. 모암(母岩)에 상당량(相當量)의 흑운모(黑雲母)를 함유(含有)하고 있으며 이 화강편마암질(花崗片麻巖質) 삼림토양(森林土壤)은 흑운모(黑雲母)의 풍화(風化)에 대한 특징(特徵)을 보여 주고 있다.

  • PDF

나노크기 매킨나와이트로 코팅된 알루미나에 의한 아비산염의 제거 (Removal of Arsenite by Nanocrystalline Mackinawite(FeS)-Coated Alumina)

  • 이승열;강정천;박민지;양경희;정훈영
    • 한국광물학회지
    • /
    • 제26권2호
    • /
    • pp.101-110
    • /
    • 2013
  • 나노크기 매킨나와이트(nanocrystalline mackinawite, FeS)는 높은 비표면적을 지닌 반응성 높은 광물로, 오염된 지하수나 토양의 복원을 위해 널리 사용된다. 또한 매킨나와이트는 혐기성 부식반응에 대해 열역학적으로 안정하고, 황산염 환원미생물의 대사에 의해 재생된다는 장점이 있다. 하지만 매킨나와이트 나노입자는 지하수 흐름에 의해 멀리 확산되거나 입자집적이 일어나 대수층 공극을 막는다. 따라서 현장복원을 위한 투과반응벽(permeable reactive barrier)의 설치를 위해서 나노크기 매킨나와이트에 대한 변형이 필요하다. 이를 위해 본 연구에서는 코팅법을 활용해 매킨나와이트 나노입자를 알루미나(alumina, $Al_2O_3$) 및 활성알루미나(activated alumina) 표면에 증착시켰다. 매킨나와이트의 코팅량은 pH에 따라 현저히 달랐으며, 두 종의 알루미나 모두 약 pH 6.9에서 최대 코팅이 관찰되었다. 이 pH에서 알루미나와 매킨나와이트는 반대의 표면전하(surface charge)를 띠어 두 광물 간 정전기적 인력이 발생하고, 이로 인해 효율적인 코팅이 일어났다. 이 pH에서 알루미나 및 활성 알루미나에 의한 코팅량은 각각 0.038 $mmol{\cdot}FeS/g$과 0.114 $mmol{\cdot}FeS/g$이었다. 혐기성 조건에서 코팅되지 않은 알루미나 및 활성 알루미나, 그리고 최적 pH에서 코팅된 알루미나 및 활성 알루미나를 사용해 아비산염(arsenite) 흡착실험을 수행했다. 코팅되지 않은 활성 알루미나는 코팅되지 않은 알루미나와 비교해 단위질량당 높은 아비산염의 제거를 보여주었으나, 매킨나와이트의 코팅에 의한 흡착량 증가를 보이지 않았다. 활성 알루미나는 높은 비표면적을 지니고 있어 반응성 높은 수산화작용기(hydroxyl functional group)가 다수 존재했고, 이로 인해 코팅된 매킨나와이트에 의한 아비산염의 제거가 중요하지 않았다. 반면 알루미나는 매킨나와이트 코팅에 의해 향상된 아비산염의 제거율을 보였는데, 이것은 알루미나에 존재한 수산화작용기가 아비산염과의 표면배위결합(surface complexation)에 소모되고, 코팅된 매킨나와이트에 의한 부가적인 흡착이 일어났기 때문이다. 코팅된 알루미나는 이전에 연구된 코팅된 실리카와 비교해보면 단위 비표면적당 매킨나와이트의 코팅량이 약 8배 높았으며, 더 높은 아비산염에 대한 흡착력을 보였다. 따라서 본 연구의 결과는 코팅된 알루미나는 투과반응벽의 설치에 적합한 물질이고, 특히 아비산염으로 오염된 지하수의 정화에 유용하게 적용될 수 있음을 지시하고 있다.