• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.42.1-42.1
• /
• 2021

Galaxy/Halo finding based on the friends-of-friend (FoF) algorithm has been widely adopted for its simplicity and expandability to the phase-space. However, cosmological simulations have been progressively bigger in size and more accurate in resolutions, resulting in that galaxy/halo finding gets computationally expensive more and more. In fact, we confirm this issue through our exercise of applying the 6-dimensional (6D) FoF galaxy finder code, VELOCIraptor (Elahi et al.2019) on the NewHorizon simulation (Dubois et al. 2021), in which typical galaxies with about 1e11 M_sun (10⁷ particles) are identified with very low speed (longer than a day). We have applied several improvements to the original VELOCIraptor code that solve the low-performance problem of galaxy finding on a simulation with high resolutions. Our modifications find the exact same FoF group and can be readily applied to any tree-based FoF code, achieving a 2700 (12) times speedup in the 3D (6D) FoF search compared to the original execution. We applied the updated version of VELOCIraptor on the entire NewHorizon simulation (834 snapshots) and identified its galaxies and halos. We present several quick comparisons of galaxy properties with those with GALAXYMaker data.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.144-152
• /
• 2004

The aim of this study was to evaluate the resistance to degradation of three commercial compomers in an alkaline solution. Dyract(Dentsply), Elan(Kerr) and F-2000(3M) polyacid modified resin composites(compomers) were used in this study. The resistance to degradation was evaluated on the basis of mass loss(%), degradation $depth({\mu}m)$ and Si, Al, Ba loss(ppm). The results were as follows : 1. The mass loss of each brand was $1.42%{\sim}2.14%$ and there was no statistically significant difference of mass loss among Dyract, F2000 and Elan. 2. The degradation layer depth of each brand was $182.92{\sim}227.7{\mu}m$ and there was no statistically significant difference of degradation layer depth among Dyract, F2000 and Elan. 3. There was statistically significant differences in Si-loss and Al-loss among three compomers (p<0.05). Si loss was the highest value in Dyract and Al loss was the highest value in F2000. 4. There was statistically significant correlation between mass loss and degradation layer depth (r=0.60, p<0.05). 5. In SEM finding, there was some destruction of compomer matrix-filler interface in post-exposure specimen to NaOH solution. As the matrix decreased, the filler particles distinguished and the periphery of the filler particles appeared whitish color due to degradation.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.4
• /
• pp.265-271
• /
• 2000

The microstructural change and transformation characteristics with cooling rate i.e. wheel speed were investigated in 82.8wt%Cu-12.8wt%Al-4.3wt%Ni SMA ribbons fabricated by melt-spinning. The thickness and width of ribbon were decreased with increasing wheel speed, while the uniformity of it was improved. At same wheel speed, the grain size of the contact surface of ribbon was smaller than that of free surface. The mean grain size was decreased with increasing wheel speed, resulted in obtaining grains with $3{\mu}m$ in mean diameter in the wheel speed of 30 m/s. However, micro-voids and cracks at grain boundary could be observed at higher wheel speed. $M_s$ and $A_s$ temperatures were decreased, and $M_s{\sim}M_f$ and $A_s{\sim}A_f$ temperature ranges were broadened with increasing wheel speed. All the ribbons were retained the ordered $D0_3$ due to rapid cooling, the volume fraction of it was increased with increasing wheel speed.

• Korean Journal of Crystallography
• /
• v.11 no.3
• /
• pp.151-156
• /
• 2000

Yb/YAG single crystals were grown from the melt composition of Y/sub 1-x/Yb/sub x/)₃Al/sub 5/O/sub 12/ where x equal to 5, 10, 15, 20, 25, 33, 50, 75 and 100 at % by floating zone method. Optimum growth parameters to get high quality single crystals were 3.5 mm/h of growth rate and 20 rpm of rotation rate under the N₂ atmosphere. After the growth, color of crystals was appeared with pale blue due to the lack of oxygen, but it was disappeared after annealing at 1450℃ for 2 hr. Absorption coefficients were linearly increased depending on the concentration of Yb/sup 3+/ ions. Broad emission band was measured in the range of 1020 to 1050 nm with the peak intensity at 1031 nm and 1051 nm because of ²F/sub 5/2/(1)→²F/sub 7/2/(3) and ²F/sub 5/2/(1)→²F/sub 7/2/(4) transition respectively. When Yb/sup 3+/ ions were substituted with high rates, there were tendency to decrease the measured fluorescent lifetime for Yb ions depending on the concentration of Yb/sup 3+/ ions.

• Korean Journal of Metals and Materials
• /
• v.47 no.8
• /
• pp.488-493
• /
• 2009

Direct syntheses of bulk $Ti_3Al$ via electro-discharge-sintering (EDS) of a stoichiometric elemental powder mixture were investigated. A capacitor bank of $450{\mu}F$ was charged with three input energies, 0.5, 1.0, and 1.5 kJ. The charged capacitor bank was then instantaneously discharged through 0.3 g of a Ti-25.0 at.%Al powder mixture for consolidation. Complete phase transformation occurred in less than $200{\mu}sec$ by the discharge and a bulk $Ti_3Al$ compact was obtained. Compared with consolidated samples fabricated by conventional methods such as high vacuum sintering and casting, the electro-discharge-sintered $Ti_3Al$ compact shows a very fine microstructure with a hardness value of 425 Hv. Electro-discharge-sintering under a $N_2$ atmosphere successfully modified the surface Ti oxide of the $Ti_3Al$ compact into Ti nitride, which concurred with the synthesis and consolidation of $Ti_3Al$. Complete conversion yielding a single phase $Ti_3Al$ is primarily dominated by the fast solid state diffusion reaction.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.4
• /
• pp.375-380
• /
• 1998

A study of characteristics of greenish pigments from silkwarm excrement by ethanol extraction. Through visible absorption scanning, it showed two absorption peaks at 415 and 657nm, and it was shown to be greenish color. In the presence of light, the stability of pigments rapidly degraded, but in the presence of Al-foil, green and blue cover were very stable. It was shown to be stabilized at the temperature of 7$0^{\circ}C$ until 20days and presence of metal ions, such as Na+, K+, Ca2+, Mg2+ and Zn2+. The pigments was shown to be stabilized in 5% acetic acid solution, but in the presence of lactic acid, citric acid and tartaric acid solution were unstable. On the result of TLC analysis, pigments were shown to be composed of eight color fractions, and main color fractions were F-1, F-2 and F-3. In F-1, F-2 fractions were revealed green color and F-3 fraction were revealed yellow color.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.668-673
• /
• 2015

Alumina-based catalysts with different Ce loadings were studied in the decomposition of $CF_4$ using microwave heating system. Heating material of microwave system used Silicon Carbide. The crystallographic phases of catalysts were investigated by XRD and decomposition rates of $CF_4$ were examined by GC-TCD. The catalysts of 10 wt% Ce modified $Al_2O_3$ showed higher $CF_4$ decomposition rate than un-modified $Al_2O_3$ for $500^{\circ}C$ reaction temperature. The k value of catalysts shows the order of $Ce(20)/Al_2O_3=Ce(0)/Al_2O_3<Ce(5)/Al_2O_3<Ce(10)/Al_2O_3$. XRD patterns of $Ce(0)/Al_2O_3$ were no difference before and after the reaction and showed $Al_2O_3$ phases. With the increase in Ce loadings, $CeO_2$, $AlF_3$ of XRD peaks was observed. The results was indicated that Ce modifed $Al_2O_3$ than un-modifed $Al_2O_3$ was decreased reaction temperature to $200^{\circ}C$ with same decomposition rate. Also the appropriated cerium sulfate loadings on $Al_2O_3$ were 5~10 wt%.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.5
• /
• pp.301-306
• /
• 2011

In this study, zeolite was synthesized by hydrothermal, fusion, and fusion/hydrothermal methods with fly ash, coal fly ash, and a waste catalyst discharged from thermal power plants and incinerator in Ulsan area. Coal fly ashes (CFAs) and a waste catalyst containing amounts of $SiO_2$ and $Al_2O_3$ ranging from 60.29 to 89.62 wt%. CFAs were mainly composed of quartz and mullite which were assayed by a XRD pattern. Zeolite could be synthesized by CFAs and the waste catalyst when all methods were used. Na-A zeolite (Z-C1, Z-C2, and Z-W5) are mainly synthesized by the fusion method from CFAs and the waste catalyst. Z-C1 and Z-C2 formed by-products, calcite peaks, which is caused by the content of CaO in CFAs and the addition of $Na_2CO_3$ for a synthetic process.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.3051-3058
• /
• 2022

In the present work, untreated Iraqi sand with grain sizes varied between 100 and 200 ㎛ was used to produce a colored glass sample that has shielding features against the low gamma-ray energy. Therefore, a weight of 70-60 wt % sand was mixed with 9-14 wt% B₂O₃, 8-10 wt% Na₂O, 4-6 wt% of CaO, 3-6 wt% Al₂O₃, in addition to 0.3% of Co₂O₃. After melting and annealing the glass sample, the X-ray diffraction spectrometry was applied to affirm the amorphous phase of the fabricated glass samples. Moreover, the X-ray dispersive energy spectrometry was used to measure the chemical composition, and the MH-300A densimeter was applied to measure the fabricated sample's density. The Makishima-Makinzie model was applied to predict the mechanical properties of the fabricated glass. Besides, the Monte Carlo simulation was used to estimate the fabricated glass sample's radiation shielding capacity in the low-energy region between 22.1 and 160.6 keV. Therefore, the simulated linear attenuation coefficient changed between 10.725 and 0.484 cm^-1, raising the gamma-ray energy between 22.1 and 160.6 keV. Also, other shielding parameters such as a half-value layer, pure lead equivalent thickness, and buildup factors were calculated.

• Korean Journal of Adult Nursing
• /
• v.15 no.3
• /
• pp.483-492
• /
• 2003

Purpose: The study was performed to identify the process of change, decisional balance and self-efficacy corresponding to the stage of smoking cessation behavior based on Transtheoretical Model in industrial workers. Method: A convenience sample of 146 industrial workers except for the never smokers, were recruited at a H industry in Ulsan. Data were collected from February 1 to 28, 2002. The research instruments were Stages of Change of Smoking Cessation Measure(DiClemente et al, 1991), Process of change(Prochaska, 1988), Smoking Abstinence Self Efficacy (SASE: DiClemente et al, 1985) and Decisional balance(SDB; Kim, 1999). Result: The results of this study were as follows; 1. The subjects were distributed in each stage of smoking cessation change: There were 64 subjects (43.0%) in the precontemplation stage, 35 subjects(23.5%) in the contemplation stage, 28 subjects(18.8%) in the preparation stage, 14 subjects(10.1%) in the action stage and 7 subjects(4.7%) in the maintenance stage. 2. Analysis of variance showed that experiental process(F=2.808, p=.042), behavioral process (F=4.567, p=.004) self-efficacy(F=9.809, p=.000), pros(F=11.107, p=.000), cons(F=6.686, p=.000), pros- cons(F=3.446, p=.018) were significantly associated with the stages of smoking cessation change. 3. Through discriminant analysis, it was found that 'PROS' was the most influential variable in discriminating the four stages of change. Conclusion: This study can provide the basis of staged matching smoking cessation program using TTM for more effective and useful intervention.