• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.162-163
• /
• 2007

In this paper, we fabrication of 2-D photonic crytal using holographic lithography. We used Ag doped chalcogenide AsGeSeS film and He-Ne (632.8nm) (P:P) Polarized laser beam. The thickness of Ag thin film was varied from 60nm and the thickness of chalcogenide thin film was varied from 2um. Frist, holographic lithography with 1-D photonic crystal on Ag/AsGeSeS film. And than revolved the sample $90^{\circ}$ to fabricate 2-D photonic crystal with holographic lithography.

• Weed & Turfgrass Science
• /
• 제2권4호
• /
• pp.387-394
• /
• 2013

Rhizoctonia spp. 에 의한 Rhizoctonia 마름병은 잔디에서 중요한 병이며, 골프장에서 잔디의 좋은 품질을 유지하기 위하여 살균제를 사용하고 있다. 본시험은 포장에서 분리한 R. solani AG-1 IB, R. cerealis 및 R. solani AG2-2에 대한 침투성 살균제인 flutolanil, pyraclostrobine, and hexaconazole에 대하여 실내에서 상대적인 균사생장을 효과적으로 50%억제하는 $EC_{50}$농도를 결정하는 시험을 수행하였다. 각각 살균제에 대한 감수성은 3종의 Rhizoctonia균주에 대하여 5 수준의 농도를 사용하였다. 3종류의 살균제에 대한 $EC_{50}$ 값은 R. solani AG-1 IB에서 가장 낮았다. 하지만, R. solani AG2-2에 대한 살균제 감수성은 pyraclostrobine 과 flutolanil에서 평균 $EC_{50}$ 값이 0.026 ${\mu}g\;a.i.\;ml^{-1}$ 와 0.044 ${\mu}g\;a.i.\;ml^{-1}$ 로 가장 높았다. R. cerealis은 hexaconazole에서 $EC_{50}$ 값이 0.022 ${\mu}g\;a.i.\;ml^{-1}$로 가장 감수성이 낮았다. 각각의 살균제의 $EC_{50}$값을 사용하여 두 농약을 혼용한 3종의 조합에서 3종의 병원균에 대한 균사 생장억제율은 R. solani AG2-2에서 가장 높았다. 본 연구결과는 포장에서 Rhizoctonia 마름병을 방제하기 위하여 실내에서 침투성 살균제에 대한 반응을 확인할 수 있었다.

• 한국재료학회지
• /
• 제30권3호
• /
• pp.131-135
• /
• 2020

Silver nanowire (AgNW) networks have been adopted as a front electrode in Cu(In,Ga)Se2 (CIGS) thin film solar cells due to their low cost and compatibility with the solution process. When an AgNW network is applied to a CIGS thin film solar cell, reflection loss can increase because the CdS layer, with a relatively high refractive index (n ~ 2.5 at 550 nm), is exposed to air. To resolve the issue, we apply solution-processed ZnO nanorods to the AgNW network as an anti-reflective coating. To obtain high performance of the optical and electrical properties of the ZnO nanorod and AgNW network composite, we optimize the process parameters - the spin coating of AgNWs and the concentration of zinc nitrate and hexamethylene tetramine (HMT - to fabricate ZnO nanorods. We verify that 10 mM of zinc nitrate and HMT show the lowest reflectance and 10% cell efficiency increase when applied to CIGS thin film solar cells.

• Journal of Magnetics
• /
• 제17권3호
• /
• pp.176-184
• /
• 2012

The structural, magnetic and magnetotransport properties of $La_{0.67}Ca_{0.33}MnO_3$: $Ag_x$ (x = 0, 0.1, 0.2, 0.3 and 0.4) composites were investigated systematically. X-ray and EDX analysis indicated that Ag is not substituted into the main $La_{0.67}Ca_{0.33}MnO_3$ phase and remains an additive to the second phase at the grain boundary. The Curie temperature first decreased from 269 K for x = 0 to 257 K for x = 0.1 and then remained nearly unchanged with increasing Ag content. For the x > 0.1 samples, a second transition temperature ($T_{MI2}$) was observed in the resistance curves. At temperatures below 150 K, a significant enhancement in MR was observed while high temperature MR decreased with increasing Ag content. The maximum MR was observed to be 55% in the x = 0.4 sample at 10 K and a 6T magnetic field, this value is larger than that of pure $La_{0.67}Ca_{0.33}MnO_3$ (53% at 265 K and 6 T). In addition, at low fields (H < 1T), a sharp increase in the MR was observed.

• 원예과학기술지
• /
• 제32권6호
• /
• pp.879-886
• /
• 2014

가축분뇨액비의 토양전염성 잔디병해들의 억제능력을 알아보고자 군위, 논산, 무안, 여주, 이천, 익산, 합천, 횡성 등 8개 지역의 가축분뇨액비생산시설에서 생산된 액비를 이용하여 기내에서 수행하였다. 가축분뇨액비와 병원균주들과의 대치배양을 통해 총 110종의 길항미생물을 선발하였으며, 각 병원균주별로 길항능력이 우수한 한 종씩을 선발하였다. 선발된 각각의 미생물은 16s rRNA 서열분석을 통해 brown patch에 길항력을 보인 ICIIIB60은 Alcaligenes sp., large patch에 길항력을 나타낸 GWIV70은 Bacillus licheniformis Ab2, dollar spot에 길항력을 보인 ISSH20은 B. subtilis C7-3으로 동정되었다. 이들의 최적배양조건은 NB 배지(ICIIIB60)와 TSB 배지(GWIV70, ISSH20)에서 온도는 $29.5^{\circ}C-31.4^{\circ}C$의 범위에서, pH는 6.5-7.3의 범위에서 잘 자라는 것으로 확인되었다. 또한 각 균주를 5종의 살균제와 혼용한 결과, ICIIIB60 균주는 테부코나졸 제제, GWIV70와 ISSH20 균주는 토클로포스메틸 제제에서 생존율이 높아 혼용처리가 가능할 것으로 판단되었다. 이러한 결과를 통해 가축분뇨액비는 비료로서의 역할뿐만이 아니라 잔디 병해를 줄일 수 있는 친환경적인 소재로 이용이 가능함을 확인하였다.

• International Journal of Automotive Technology
• /
• 제2권4호
• /
• pp.135-145
• /
• 2001

DEUTZ AG, co-founded in 1864 by Nicolaus August Otto, the inventor of the four-stroke cycle engine, has developed the new 2013 engine for commercial vehicles on the basis of the tried and tested 1012 and 1013 series. With 4 and 6 cylinder models, the engine covers the power range between 100 and 190 kW. At the time of their introduction to the market, the engines will meet the exhaust emission legislation of EURO IV and incorporate the potential for EURO IV, Further engineering targets were. (Compactness, Favourable power/cost relation, Low weight, Low fuel consumption and Low noise level). All targets could be accomplished in a relatively short development period via the application of modem simulation tools and test methods. In this paper, the design configuration of the engines is described with particular emphasis on measures for noise emission reduction and the combustion system including injection and turbo charging. Furthermore, we demonstrate the engine's potential to fullfill the European emission legislation EU4, which comes into force in 2005.

• 분석과학
• /
• 제23권3호
• /
• pp.233-239
• /
• 2010

폴리스테린을 주형으로 사용하여 순수한 매크로포러스 실리카 지지체를 졸겔법에 의하여 제조하였으며, 은 입자가 매크로 기공 안에 균일하게 분산되어 있는 매크로포러스 은/실리카 복합소재를 성공적으로 제조하였다. 순수한 실리카 다공체는 폴리스테린 크기에 따라 100 nm와 200 nm의 균일한 기공을 가지고 있었으며 이는 폴리스테린의 크기에 따라 기공크기를 제어할 수 있었다. 매크로포러스 은/실리카 기공의 크기 제어와 $AgNO_3$의 농도에 따른 미세구조를 관찰한 결과 TEOS의 3 wt% $AgNO_3$를 사용한 것이 가장 이상적인 균일한 기공의 분포를 나타내었다. 매크로포러스 은/실리카 복합체는 100-200nm 균일한 기공을 가지고 있었으며, 지지체 내의 은 입자는 대략 15~20 nm 크기를 보여주었다.

• Advances in nano research
• /
• 제10권4호
• /
• pp.373-383
• /
• 2021

In this work, silver nitrate complexes of sulfanilamide-5-methyl-2-thiophene carboxaldehyde (SMTCA) ligand intercalated Zn/Al-layered double hydroxide [Ag-SMTCA-LDH] were synthesized for the potential application as an antimicrobial system. The SMTCA ligand was synthesized by reacting sulfanilamide and 5-methyl-2-thiophene carboxaldehyde in methanol and further complexation with silver nitrate metal ions [Ag-SMTCA]. The structural analyses of synthesized compounds confirmed an intercalation of Ag-SMTCA into Zn/Al-NO₃-LDH by flake/restacking method. SMTCA, Ag-SMTCA and Ag-SMTCA-LDH were characterized by ¹H nuclear magnetic resonance (¹H NMR) spectroscopy, Fourier-transform infrared (FTIR), ultraviolet-visible (UV-Vis) spectrophotometer, scanning electron microscopy (SEM) and transmission electron microscopy (TEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). It was found that Ag-SMTCA-LDH exhibited good antimicrobial activity against both gram-positive (Bacillus subtilis, [B. subtilis], Staphylococcus aures, [S. aureus]) and gram-negative (Escherichia coli, [E. coli], Pseudomonas aeruginosa [P. aeroginosa]) bacteria as well as excellent antioxidant activity.

• The Journal of Advanced Prosthodontics
• /
• 제15권2호
• /
• pp.80-92
• /
• 2023

PURPOSE. This study incorporated the nanomaterial, nanostructured silver vanadate decorated with silver nanoparticles (AgVO₃), into heat-cured resin (HT) at concentrations of 2.5%, 5%, and 10% and compared the adhesion of multispecies biofilms, surface characteristics, and mechanical properties with conventional heat-cured (HT 0%) and printed resins. MATERIALS AND METHODS. AgVO₃ was incorporated in mass into HT powder. A denture base resin was used to obtain printed samples. Adhesion of a multispecies biofilm of Candida albicans, Candida glabrata, and Streptococcus mutans was evaluated by colony-forming units per milliliter (CFU/mL) and metabolic activity. Wettability, roughness, and scanning electron microscopy (SEM) were used to assess the physical characteristics of the surface. The mechanical properties of flexural strength and elastic modulus were tested. RESULTS. HT 10%-AgVO₃ showed efficacy against S. mutans; however, it favored C. albicans CFU/mL (P < .05). The printed resin showed a higher metabolically active biofilm than HT 0% (P < .05). There was no difference in wettability or roughness between groups (P > .05). Irregularities on the printed resin surface and pores in HT 5%-AgVO₃ were observed by SEM. HT 0% showed the highest flexural strength, and the resins incorporated with AgVO₃ had the highest elastic modulus (P < .05). CONCLUSION. The incorporation of 10% AgVO₃ into heat-cured resin provided antimicrobial activity against S. mutans in a multispecies biofilm did not affect the roughness or wettability but reduced flexural strength and increased elastic modulus. Printed resin showed higher irregularity, an active biofilm, and lower flexural strength and elastic modulus than heat-cured resin.

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1070-1074
• /
• 2002

We have carried out two-beam interference experiments to form holographic gratings on As$_{40}$ Se$_{15}$ S$_{35}$Ge$_{10}$ single layer, Ag/As$_{40}$ Se$_{15}$ S$_{35}$Ge$_{10}$ multi-layer. In this study, holographic gratings have been formed using He-Ne laser(632.8nm) under different polarization combinations(intensity polarization holography, phase polarization holography). The diffraction efficiency was obtained by the +lst order intensity. The maximum diffraction efficiency of As$_{40}$ Se$_{15}$ S$_{35}$Ge$_{10}$ single layer, As$_{40}$ Se$_{15}$ S$_{35}$Ge$_{10}$ and MgF$_2$/As$_{40}$ Se$_{15}$ S$_{35}$Ge$_{10}$ multi-layer were 0.8%, 1.4% and 3.1% under intensity polarization holography, respectively.