• 제목/요약/키워드: $AgInS_2$/ZnS

검색결과 105건 처리시간 0.029초

다층박막 IGZO/Ag/IGZO의 Ag 두께 변화에 따른 구조적, 광학적 특성 연구

  • 왕홍래;이상렬;김홍배
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.365-365
    • /
    • 2013
  • 본 실험에서는 RF magnetron sputter장비와 evaporator장비를 이용하여 다층박막 IGZO/Ag/IGZO를 제작하였다. 소결된 타겟은 In:Ga:ZnO 1:1:1mol%로 조성된 타겟을 사용하였으며, Ag는 99.999%의 순도를 가진다.다층박막 OMO구조의 Oxide layer는sputter장비를 이용 IGZO막을 제작하였으며, Metal layer는 evaporator 장비를 이용 Ag막을 제작하였다. 변수로는 Metal layer 두께에 따른 구조적, 광학적 특성 변화를 연구하였다. Oxide layer의 RF sputter 공정 조건으로는 초기압력 $3.0{\times}10^{-6}$ Torr 이하로 하였으며, 증착압력 $2.0{\times}10^{-2}$ Torr, RF power 30 W, Ar 50 sccm으로 고정시켰으며, Metal layer의 evaporator 공정조건으로는 $5.0{\times}10^{-6}$ 이하, 전압은 0.3V, 기판 회전속도는 2RPM 두께는 Thickness moniter로 3. 5. 7. 9. 11. 13. 15 nm를 확인하며 증착하였다. 분석결과로는 AFM측정결과 거칠기는 2 nm이하의 거칠기를 확인했으며, XRD측정결과 Bragg's 법칙($2\;dsin{\Theta}=n{\lambda}$)를 만족하는 피크를 찾을 수 없어 비정질 구조임을 확인할 수 있었다. 투과도 측정결과 가시광 영역에서 최대 80% 이상의 투과율을 보여주었으며, IR영역에서는 30% 이하의 투과율을 보여주었다. 에너지 밴드갬 계산결과 4.5~4.6 eV를 갖는 것을 확인하였으며, Low-e 분야에 사용가능함을 보여주었다.

  • PDF

Flexible quantum dot solar cells with PbS-MIx/PbS-BuDT bilayers

  • 최근표;양영우;윤하진;임상규
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.347.2-347.2
    • /
    • 2016
  • Recently, in order to improve the performance of the colloidal quantum dot solar cells (CQDSCs), various efforts such as the modification of the cell architecture and surface treatment for quantum dot (QD) passivation have been made. Especially, the incorporation of halides into the QD matrix was reported to improve the performances significantly via passivating QD trap states that lower the life-time of the minority-carrier. In this work, we fabricated a lead sulfide (PbS) QD bilayer treated with different ligands and utilized it as a photoactive layer of the CQDSCs. The bottom and top PbS layer was treated using metal iodide ($MI_x$ and butanedithiol (BuDT), respectively. All the depositions and ligand treatments were carried out in air using layer-by-layer spin-coating process. The fabrication of the active layers as well as the n-type zinc oxide (ZnO) layer was successfully carried out on the bendable indium-tin-oxide (ITO)-coated polyethylene terephthalate (PET) substrate, which implies that this technique can be applied to the fabrication of flexible and/or wearable solar cells. The power conversion efficiency (PCE) of the CQDSCs with the architecture of $PET/ITO/ZnO/PbS-MI_x/PbS-BuDT/MoO_x/Ag$ reached 4.2 %, which is significantly larger than that of the cells with single QD (PbS-BuDT) layer.

  • PDF

적층형 ZnO바리스터의 내부전극과 Bi$_2$O$_3$ 와의 반응 (The Reaction of Internal Electrodes with Bi$_2$O$_3$ in Multilayer ZnO Varistor)

  • 김영정;김환;홍국선;이종국
    • 한국세라믹학회지
    • /
    • 제35권11호
    • /
    • pp.1121-1129
    • /
    • 1998
  • Reactions between Ag-Pd internal electrode materials and{{{{ { {Bi }_{2 }O }_{3 } }} in multilayer chip varistor were in-vestigated. For more than 1 mol%{{{{ { {Bi }_{2 }O }_{3 } }} in varistor composition internal electrode structure was destroyed due to the reaction between internal electrode and{{{{ { {Bi }_{2 }O }_{3 } }} But for typical varistor compositions (below 1 mol% of{{{{ { {Bi }_{2 }O }_{3 } }} content) microstructural changes around the internal electrode were not observed. However SEM-EDS and TEM-EDS analysis showed the uneven distribution of{{{{ { {Bi }_{2 }O }_{3 } }} in the internal electrode which was due to the migration of{{{{ { {Bi }_{2 }O }_{3 } }} to the electorde during sintering. As a results the nonlinear coefficient of multilayer varistor showed very large distribution as well as the breakdown voltage.

  • PDF

남서태평양 Manus Basin에서 산출되는 열수 분출구에 대한 지화학적 연구 (Geochemistry of the Hydrothermal Chimneys in the Manus Basin, Southwestern Pacific Ocean)

  • 이경용;최상훈;박숭현
    • 자원환경지질
    • /
    • 제35권1호
    • /
    • pp.1-12
    • /
    • 2002
  • 남서태평양 Manus Basin은 인도-호주판과 태평양판이 충돌하여 형성된 배호분지로 열수분출작용이 활발하며, 석영 안산암 및 현무암질 안산암 계열의 산성 화산암류를 기반암으로 발달한 열 수분출구 등 열수광체가 산재되어 있다. 열수분출구는 주로 황철석, 황동석, 백철석, 섬아연석, 방연석 등의 광석광불과 이에 수반되는 경석고, 중정석, 비정질 규소 등으로 구성되어 있으며, 황동석이 괴상으로 다량 산출되는 Cu-rich chimney와 섬아연석이 괴상으로 다량 산출되는 Zn-rich chimney로 대분된다. 열수분출구글 구성하는 금속원소들의 전체적인 상관관계에Ai Zn은 Sb, Cd, Ag, 등과 그리고 Cu는 Mo, Mn, Co 등과 좋은 정의 상관관계가 인지된다. 또한, 열수분출구에 따라 Zn-rich chimney에서는 Au가 Zn과 대단히 높은 정의 상관관계를 보여주며 Cd, Mn, Sb 등이 부화되어 있는 반면에, Cu-rich chimney에서는 Au가 Zn 및 Pb와 좋은 정의 상관관계를 보여주며 Mo, Co 등이 부화되어 있는 특성을 보여준다. 연구지역 Cu-rich chimney 및 Zn-rich chimney의 Au 평균품위는 각각 15.9 ppm 및 29.0 ppm이며, Ag, Cu, Zn 등 유용금속도 상당량 부화되어 있어 경제성이 높은 것으로 평가된다. Zn-rich chimney에 산출하는 경석고 및 비정질규소의 유체포유물 균일화 온도 및 염농도는 174~22$0^{\circ}C$ 및 2.7~3.6 equiv, wt.% NaCl로. 섬아연석 등 광석광물의 주 광화 작용이 약 20$0^{\circ}C$를 전후한 범위에서 진행되었으며, 이때 산소분압은 $10^{40.8}$bar이하에서 $10^{39.5}$이상으로 황분압은 $10^{14.7}$bar이하에서 $10^{13.4}$이상으로 각각 증가 전이되는 것으로 추론된다. 한편, Cu-rich chimney는 Zn-rich chimney의 주 광화온도조건보다 높은 온도에서 광화작용이 진행되었을 것으로 판단된다.

인공타액에서 수종 아말감의 부식시 용해성분 및 표면 부식 생성물에 관한 실험적 연구 (EXPERIMENTAL STUDY ON THE DISSOLUTION COMPONENTS AND CORROSION PRODUCTS OF SEVERAL AMALGAMS IN ARTIFICIAL SALIVA)

  • 조승주;이명종
    • Restorative Dentistry and Endodontics
    • /
    • 제19권1호
    • /
    • pp.1-26
    • /
    • 1994
  • The purpose of this study was to investigate the dissolution components during corrosion of amalgams and to identify surface corrosion products in the modified Fusayama artificial saliva. Four type of amalgam alloys were used: low copper lathe cut amalgam alloy (Cavex 68), low copper spherical amalgam alloy (Caulk Spherical Alloy), high copper admixed amalgam alloy (Dispersalloy) and high copper single composition amalgam alloy (Tytin). Each amalgam alloy and Hg were triturated according to the manufacturer's direction by means of mechanical amalgamator (Capmaster, S.S.White), and then the triturated mass was inserted into the cylindrical metal mold which was 10mm in diameter and 2.0mm in height and condensed with compression of 150kg/$cm^2$ using oil pressor. The specimens were removed from the mold and stored at room temperature for 7 days and cleansed with distiled water for 30 minutes in an ultrasonic cleaner. The specimens were immersed in the modified Fusayama artificial saliva for the periods of 1 month, 3 months and 6 months. The amounts of Hg, Cu, Sn and Zn dissolved from each amalgam specimen immersed in the artificial saliva for the periods of 1 month, 3 months and 6 months were measured using Inductivity Coupled Plasma Atomic Emission Spectrometry (ICPQ-1000, Shimadzu, Japan) and amount of Ag dissolved from amalgam specimen was measured using Atomic Absorption Spectrophotometry (Atomic Absorption/Flame emission spectrophotometer M-670, Shimadzu, Japan). A surface corrosion products of specimens were analysed using Electron Spectroscopy Chemical Analyser (ESCA PHI-558, PERKIN ELMER, U.S.A.). The secondary image and back scattered image of corroded surface of specimens was observed under the SEM, and the corroded surface of specimens was analysed with the EDX. The following results were obtained. 1. The dissolution amount of Cu was the most in high copper admixed amalgam(Dispersalloy) and the least in high copper single composition amalgam(Tytin). 2. Sn and Zn were dissolved during all the experiment periods, and dissolution amounts were decreased as the time elapsed. 3. Initial surface corrosion products were ZnO and SnO. 4. Corrosion of ${\gamma}$ and ${\gamma}_2$ phase in low copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in low copper spherical amalgam(Caulk Sperical Alloy). 5. Corrosion of ${\gamma}$ and $\eta$' phase in high copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in high copper admixed amalgam(Dispersalloy). 6. Sn-Cl was produced in the subsurface of low copper amalgams and high copper admixed amalgam.

  • PDF

Bacillus cereus에 의한 Pullulanase의 생산 및 특성 (Production and Characteristics of Pullulanase from Bacillus cereus)

  • 정만재;임계숙;조대선;우정숙
    • 한국미생물·생명공학회지
    • /
    • 제20권4호
    • /
    • pp.409-416
    • /
    • 1992
  • Bacillus cereus에 의한 pullulanase 생산의 최적 배양온도 및 배양시간은 각각 $15^{\circ}C$, 72시간이고, 기본배지에 casein, nutrient broth, egg albumin의 첨가는 효소의 생산을 크게 증가시켰다. 황산암모늄분획, CM-cellulose와 DEAE-cellulose column chromatography에 의하여 효소를 정제하였고 정제효소의 specific activity는 29.09U/mg protein, 수율은 17.1이었다. 정제효소는 polyacrylamide disc gel electrophoresis에 의하여 single band를 나타내었고, SDS-polyacrylamide disc gel electrophoresis에 의하여 추정된 분자량은 61,000, 등전점은 pH7.0, 최적온도는 $40^{\circ}C$, 최적 pH는 6.5, $35^{\circ}C$ 이하에서 안정하였고, pH 안정 범위는 6.5-11.0, $Ag^{+}$, $Hg^{2+}$, $Zn^{2+}$에 의하여 크게 저해되었고, $Ca^{2+}$은 효소의 내열성을 증가시켰다. 정제효소는 공시기질중 pullulan을 잘 분해시켰으며 pullulan에 대한 분해산물은 maltoriose이었다.

  • PDF

도곡(Au-Ag-Cu)광산 주변지역의 중금속 원소들의 환경오염특성 및 생체흡수도 평가 (Environmental Contamination and Bioavailability Assessment of Heavy Metals in the Vicinity of the Dogok Au-Ag-Cu Mine)

  • 이성은;이진수;전효택
    • 자원환경지질
    • /
    • 제38권2호
    • /
    • pp.135-142
    • /
    • 2005
  • 도곡광산 주변지역 중금속 원소들의 오염 특성을 알아보고, 이들 원소들의 생체흡수도를 평가하기 위해서 본 연구를 수행하였다. 연구 대상 지역의 주오염원은 광미 및 폐석더미 그리고 갱내수 등으로 추정된다. 광미 내에는 As이 $140{\cal}mg/{\cal}kg$, Cd이 $107{\cal}mg/{\cal}kg$, Cu가 $3017{\cal}mg/{\cal}kg$, Pb가 $12926{\cal}mg/{\cal}kg$, Zn는 $9094{\cal}mg/{\cal}kg$(우기 전 시료)로 높은 함량을 나타내고 있다. 밭토양 내의 중금속 원소들 함량은 자연토양 내의 평균함량(Bowen, 1979)보다 높게 나타났으나, 광미적치장의 광미에 비해서 낮은 함량을 나타낸다. 수계내 중금속 함량은 독성 원소들의 주오염원으로 생각되는 본 갱의 광미적치장 주변 하천수 시료에서 가장 높은 수준을 나타내었고, 하류로 가면서 희석 효과에 의해서 그 함량이 점차 감소하는 경향을 나타내고 있다. 광미와 토양을 대상으로 연속추출분석을 한 결과, 비잔류상 형태의 존재비율이 높게 나타났는데 이는 계속적인 풍화와 산화에 의한 오염을 지시한다. 그리고 Cd과 Zn는 대상 지역 대부분에서 높은 이동도를 나타내고 있다. 밭토양을 대상으로 SBET분석에 의한 중금속 원소들의 생체흡수도 평가 결과, $Cd(55.3\%),\;Cu(46.5\%),\;Zn(41.0\%),\;As(37.0\%)$로 나타났다. 밭토양(S3) 시료는 중금속 원소들의 총 함량과 생체흡수도 모두 가장 높은 함량을 나타내었다.

당두 연-아연 광상의 산출광물과 화학조성 (Mineralogy and Chemical Compositions of Dangdu Pb-Zn Deposit)

  • 임온누리;유재형;고상모;허철호
    • 자원환경지질
    • /
    • 제46권2호
    • /
    • pp.123-140
    • /
    • 2013
  • 당두 연-아연 광상 주변의 지질은 선캠브리아 기반암류인 변성암류와 그 상부를 피복하는 오르도비스기의 돌로마이트, 석회암, 석회규산염암, 혼펠스, 그리고 이를 관입한 중생대와 백악기의 화강암류 및 암맥들로 구성되어있다. 광상은 오르도비스기의 석회암층 내 열극을 따라 $N20{\sim}40^{\circ}W$방향으로 교대한 연-아연 스카른광상이다. 당두광상에서 주로 개발된 광체는 -30 m level의 연장 10 m, 폭 3 m규모의 $N20^{\circ}E$, $50^{\circ}NW$방향으로 발달한 광체와 연장 15 m, 폭 3 m 규모의 $N30^{\circ}E$, $50^{\circ}NW$방향으로 발달한 광체, 포켓상 광체가 있으며, -63 m level의 폭 2 m, 연장 20 m규모의 $N20^{\circ}E$, $45^{\circ}NW$방향으로 발달한 광체가 있다. 주요 광석광물로는 섬아연석, 황동석, 자류철석, 방연석, 자철석, 황철석이 있으며, 자연창연, 휘창연석, 헤사이트, 코살라이트, 백철석이 소량 수반된다. 섬아연석의 정량분석 결과 평균 FeS 14.14~18.08 mole%, CdS 0.44~0.70 mole%, MnS 0.52~1.13, 1.53~2.09 mole%의 범위를 갖는다. 방연석은 평균 0.54 wt.%의 소량의 은을 함유하며, 일부 시료에서는 1.47 wt.%에 이르는 은을 함유하기도 한다. 코살라이트는 평균 Ag 2.43 wt.%, Bi 44.36 wt.%, Pb 35.05 wt.%의 조성을 보이며, 평균 화학식 $Pb_{1.7}Bi_{2.1}Ag_{0.2}S_5$ 로 Bi가 소량 부화되었으며, Ag를 소량 포함하는 것이 특징이다. 스카른광물로는 녹렴석, 녹니석, 석류석, 단사휘석, 투각섬석, 석영, 방해석이 있다. 광체는 중심부로부터 외곽부로 대칭적인 분포를 보이며, 중심부로부터 녹렴석-단사휘석대, 녹렴석-단사휘석-녹니석대, 녹렴석-석류석-단사휘석대 순으로 분포한다. 석류석의 화학조성은 광체 중심부에 해당하는 녹렴석-단사휘석대에서 외곽부인 녹렴석-단사휘석-녹니석대 및 녹렴석-석류석-단사휘석대로 감에 따라 그로술라의 비율이 높아지는 경향을 보인다. 단사휘석은 투휘석-헤덴버자이트 고용체로 산출되며, 녹렴석-단사휘석대에서 녹렴석-단사휘석-녹니석대, 녹렴석-석류석-단사휘석대로 감에 따라 요한세나이트의 비율이 높아지는 경향을 보인다. 광화작용은 단일광화작용에 의해 이루어졌으며, 조기는 스카른광물 정출기, 중기는 광석광물 정출기, 말기는 저온성 광석광물의 정출기이다. 주요 광석광물은 중기~말기에 걸쳐 형성되었다. 자류철석의 변질산물인 백철석-황철석의 공존 온도와 코살라이트의 형성온도로 미루어보아 저온성 광물 정출기의 온도는 $125{\sim}300^{\circ}C$로 생각된다. 광화작용에 따른 광석광물의 형성 온도에 의하면 조기에서 말기로 감에 따라 $600^{\circ}C$에서 $300^{\circ}C$ 이하의 환경까지 온도가 낮아졌을 것으로 추정된다.

廢 PCBs부터 귀금속(Au, Ag 등)의 선택적 침출공정 (Selective Leaching Process of Precious Metals (Au, Ag, etc.) from Waste Printed Circuit Boards (PCBs))

  • 오치정;이성오;국남표;김주환;김명준
    • 자원리싸이클링
    • /
    • 제10권5호
    • /
    • pp.29-35
    • /
    • 2001
  • 본 연구는 폐컴퓨터 인쇄회로기판으로부터 Au와 Ag 및 유가금속을 회수하기 위해 수행하였다. 시료는 슈레더를 사용하여 1 mm이하 입자로 분쇄한 후 정전선별하여 약 70%의 부도체를 분리제거하고, 회수된 30%의 도체는 자력선별에 사용하였다. 자력선별에 의해 42%의 자성체는 제거되고 58%의 비자성체를 유가물 침출 원료로 사용하였으며, 비자성체의 Au및 Ag의 함량은 각각 0.227mg/g, 0.697 mg/g 이였다. 회수된 물질로부터 Cu, Fe, Zn, Ni, Al를 침출분리하기 위해 황산과 과산화수소수를 혼합한 침출용매를 사용하였다. 2.0M 황산, 0.2M과산화수소수, 반응온도 $85^{\circ}C$에서 95%이상의 Cu, 로n, Fe, Ni, Al를 침출 할 수 있었으며, Au와 Ag는 침출되지 않았다. 반면에 황산침출 후 잔사로부터 Au, Ag의 선택적인 침출을 위해 혼합용매(0.2M(NH$_4$)$_2$S$_2$O$_3$, 0.02M $CusO_4$,0.4M NH$_4$OH)를 사용하였을 때 Ag는 100%, Au는 95%이상 침출하였다 또한 최종 잔사로부터 Pb침출은 NaCl용액을, Sn침출은 황산용액을 사용하였으며 침출율은 각각 95%, 98%를 나타냈다.

  • PDF

Selective Transport of Lead(II) through a Bulk Liquid Membrane Using a Cooperative Carrier Composed of Benzylaza-12-crown-4 and Oleic Acid

  • Kazemi, Sayed Yahya;Shamsipur, Mojtaba
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권6호
    • /
    • pp.930-934
    • /
    • 2005
  • A chloroform membrane system containing a given mixture of benzylaza-12-crown-4 and oleic acid is introduced for the selective and efficient transport of $Pb^{2+}$ ion. The transport was capable of moving metal ions ‘up-hill’. In the presence of ${S_2O_3}^{2-}$ion as a suitable metal ion acceptor in the receiving phase, the amount of lead ion transport across the liquid membrane after 150 minutes is (95.0 ${\pm}$ 1.7)%. The selectivity and efficiency of lead transport from aqueous solution containing $Tl^+,\;Ag^+,\;Mg^{2+},\;Ca^{2+},\;Co^{2+},$ $Ni^{2+},\;Cu^{2+},\;Zn^{2+},\;Hg^{2+}$ and $Cd^{2+}$were investigated. In the presence of thiosulfate as a suitable masking agent in the source phase, the interfering effects of $Ag^+\;and\;Cu^{2+}$ were diminished drastically.