• 상하수도학회지
• /
• 제9권2호
• /
• pp.97-107
• /
• 1995

Today a conventional water treatment system has many problems. The ozone/GAC process, sometimes termed Biological Activated Carbon(BAC), appeared to be effective for the removal of soluble organic matters in the drinking water. The water quality of Nak-dong river in Pusan, generally shows BDOC 30-40% and NBDOC 60-70%. The pilot plant installed at the Duk-san water works that was been largest treatability(1,650,000ton/day) in Pusan. A experimental water in the pilot plant made use of the water after sand-filteration. Following results are drawn from this study. Initial adsorption velocity($DOC/DOC_o/T$) in the pure adsorption of GAG had a 0.0225, it's velocity changed to 0.006 after ozone added and the optimum ozone dose ranged of $1.4-2.0mgO_3/L$. A experimental water in the pilot plant composed with humic material(78%). Humic material composed with humic acid(20%) and fulvic acid(56%), and it's rate changed to 18 and 50% respectively after ozone added. DOC constantly decreased in the EBCTs and removal efficieny in the 15min of EBCT was 45-50%. It showed the largest removal rate of BDOC in the EBCT 5 and among the season, characteristics of removal varied. The HPC distributed over $10^6-10^7CFU/cm^3$ in the bed depth and among the season, distribution of HPC were differential.

• 대한환경공학회지
• /
• 제28권3호
• /
• pp.240-248
• /
• 2006

본 연구에서는 선행연구를 통하여 개발된 고도처리 공정의 현장적용을 용이하게 하기 위하여 이를 개조한 retrofitting 공정을 제안하였으며, 제안된 공정을 $50m^3$/일 규모의 pilot plant 운전을 통하여 현장 평가하였다. 또한 pilot plant 내에서 미생물의 배양 상태를 확인하기 위하여 FISH 법을 이용하여 세균 군집구조를 조사하였다. 제안된 retrofitting 공정은 배양조를 별도로 건설하지 않음으로써 16%($60,000m^3$/일 규모 고도처리시설 도입 기준)의 초기건설비를 절감할 수 있는 것으로 평가되었으며, 동절기를 포함한 장기간의 pilot plant 운전을 통하여 수처리 효율과 유지관리 측면에서 현장적용성이 우수한 것으로 사료되며 방류수질 기준을 만족하는 것으로 평가되었다. 또한 pilot plant와 대조군(A2/O 공정, B 하수처리장)에서 총세균수는 큰 차이가 없으나, pilot plant의 bioreactor에 의해서 세균 군집 변화가 다르게 나타났다. 우점종은 주로 하수처리에서 중요한 역할을 하는 토양 미생물이 속한 ${\beta}$-proteobacteria group이고, bioreactor 유출수에서 유입수 대비 $25{\sim}607%$ 증가하는 것으로 확인되었으며, 이렇게 증가된 ${\beta}$-group의 미생물은 시스템 내에서 일정 농도를 유지하는 것으로 확인되었다.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4274-4282
• /
• 2011

본 연구는 염색폐수 처리시설에서 생물학적공정(2차) 처리를 거처 배출되고 있는 방류수 중에 미처리되어 잔존하고 있는 난분해성 유기물(COD) 성분을 제거하기 위하여, 고도처리공법으로서 Fenton 산화공정을 적용하여, 공법의 적용 가능성과 최적의 운전조건을 얻고자, 실험실 실험과 Pilot Plant 현장 운전을 실시하였다. 본 Fenton 산화실험의 원수로 사용된 생물학적(2차) 처리수의 수질은 실험기간동안 $COD_{Mn}$ 30~50mg/L으로 측정되었다. Fenton 산화반응 실험 결과, 최적의 반응조건은 pH 3~3.5, 반응시간 2~2.5시간, 약품 주입량비($FeCl_2$(33%)/$H_2O_2$(35%)) 3 : 1 로 나타났다. 약품 주입량 비가 적정조건일 때, 슬러지 발생량($SV_{2hr}$)은 전체 양의 21~28% 범위인 것으로 측정되었다. Pilot Plant 실험 결과, 산화반응조의 체류시간 변화에 따라 처리효율이 크게 영향을 받고 있었으며, 적정 체류시간은 2.0시간 이었다. 현장에 Pilot Plant($2m^3/d$)를 설치하여 연속운전을 실시한 결과, COD 농도가 제거효율 면에서 60~70%를 나타내었고, 처리수질은 20mg/L 이하로 측정되어, 대체로 안정적이고 양호한 처리효율을 나타내고 있었다.

• Membrane and Water Treatment
• /
• 제7권1호
• /
• pp.55-70
• /
• 2016

Microfiltration/ultrafiltration (MF/UF) Adsorptive polyamide-6 (PA-6) membranes were prepared using wet phase inversion process. The prepared PA-6 membranes are characterized by scanning electron microscopy (SEM), porosity and swelling degree. In this study, the membranes performance has examined by adsorptive removal of copper ions from aqueous solutions in a batch adsorption mode. The $PA-6/H_2O$ membranes display sponge like and highly porous structures, with porosities of 41-73%. Under the conditions examined, the adsorption experiments have showed that the $PA-6/H_2O$ membranes had a good adsorption capacity (up to 120-280 mg/g at the initial copper ion concentration ($C_0$) = 680 mg/L, pH7), fast adsorption rates and short adsorption equilibrium times (less than 1.5-2 hrs) for copper ions. The fast adsorption in this study may be attributed to the high porosities and large pore sizes of the $PA-6/H_2O$ membranes, which have facilitated the transport of copper ions to the adsorption. The results obtained from the study illustrated that the copper ions which have adsorbed on the polyamide membranes can be effectively desorbed in an Ethylene dinitrilotetra acetic acid Di sodium salt ($Na_2$ EDTA) solution from initial concentration (up to 92% desorption efficiency) and the PA-6 membranes can be reused almost without loss of the adsorption capacity for copper ions. The results obtained from the study suggested that the $PA-6/H_2O$ membranes can be effectively applied for the adsorptive removal of copper ions from aqueous solutions.

• Membrane and Water Treatment
• /
• 제14권2호
• /
• pp.85-93
• /
• 2023

Membrane separation is widely used for several applications such as water treatment, membrane reactors and climate change. Cross-linked organic-inorganic hybrid polyvinylidene fluoride (PVDF) / Tetraethyl orthosilicate (TEOS) was adopted for the preparation of optimized hollow membrane (HFM) for membrane distillation or other low pressure separators for mechanical properties and permeability under varying pretreatment schemes. HFMs were prepared on semi-pilot membrane fabrication system. Novel adopted post-treatment schemes involved soaking in glycerol, magnesium sulphate (MgSO₄), sodium hypochlorite (NaOCl), and isopropanol for different durations. All fibers were characterized for morphology using a scanning electron microscope (SEM), surface roughness using atomic force microscope (AFM), elemental composition by examining Energy Dispersive Spectroscopy (EDS), water contact angle (CA°) and porosity. The performance of the fibers was evaluated for pure water permeation flux (PWF). Post-treatment with MgSO₄ gave the highest both tensile modulus and flux. Assessment of properties and performance revealed comparable results with other organic-inorganic separators, HF or flat. In spite of few reported data on post treatment using MgSO₄ in presence of TEOS, this proves the potential of low cost treatment without negative impact on other membrane properties. The flux is also comparable with hypochlorite which manifests substantial precaution requirements in actual industrial use.The relatively high values of flux/bar for sample treated with TEOS, post treated with MgSO₄ and hypochlorite are 88 and 82 LMH/bar respectively.

• 대한환경공학회지
• /
• 제27권2호
• /
• pp.138-144
• /
• 2005

본 연구는 질화작용에 관여하는 Nitrosomonas sp. 등의 암모니아산화세균과 Nitrobacter sp. 등 아질산산화세균이 $A^2/O$ Pilot 장치의 혐기조, 무산소조, 호기조에서 어떤 양상으로 변화하는지를 조사하는데 있다. 혼합액의 부유 질화세균군과 폐타이어로 성형 제조된 입상담체에 부착된 질화세균군은 FISH법으로 분석하였다. Pilot 장치의 질산화속도는 $1.97{\sim}2.98mg\;N/g\;MLVSS{\cdot}hr$의 값을 보였다. 각 반응조에서 총 부유 세균수중 암모니아 산화세균군 (NSO로 검출된 세균군)이 차지하는 비율은 호기조 < 무산소조 < 혐기조 순이었으나, 이와 반대로 아질산 산화세균(NIT로 검출된 세균)이 차지하는 비율은 혐기조 < 무산소조 < 호기조 순이었다. 생물막의 두께와 건조밀도 및 담체 무게당 부착된 미생물량은 각각 $180{\sim}188\;{\mu}m$, $38.5{\sim}43.9\;mg/cm^3$, $29.4{\sim}32.5\;mg/g$ 이었고, 담체에 부착된 총세균수 중 질화세균이 차지하는 비율은 NSO(3.2%)와 NIT(2.8%)가 거의 비슷하였으나, 각 반응조에 존재하는 부유성 질화세균, 즉 NSO($22.8{\sim}28.4%$)와 NIT($17{\sim}26%$)에 비해서는 부착성 질산화 세균의 비가 현저히 낮았다.

• 한국물환경학회지
• /
• 제21권2호
• /
• pp.118-124
• /
• 2005

The oxygen solubilized device(O.S.D) and standardized microorganism culture system is more efficient than physical and chemical purification techniques in closed water. This study was to determine how the O.S.D and standardized culture system is efficient in purification capacity in closed water based on the lab scale and pilot plant. In the batch test, inducing the quantitative results from pilot plant operation condition, removal efficiency of COD and TN were about 48.3% and 35% respectively, while SS and chlorophyll-a were 94.9% and 68.7%. The pilot plant results showed that suspended solid(SS) and chlorophyll-a removal efficiency were 60% and 59% respectively, due to coagulation characteristics by standardized culture. Total nitrogen(TN) and total phosphorus(TP)showed good effect for the purification of target pond water quality from field data. Additionally, released velocity was determined in control condition of $5.31mgPO{_4}^{3-}{\cdot}m^{-2}{\cdot}day^{-1}$ and $2486.8mgCOD{\cdot}m^{-2}{\cdot}day^{-1}$. Otherwise, phosphate and COD reflux in the aeration and microorganism condition was showed $-9.95mgPO{_4}^{3-}{\cdot}m^{-2}{\cdot}day^{-1}$ and $-397.88mgCOD{\cdot}m^{-2}{\cdot}day^{-1}$. This technology is the most effective not only removal of SS and chlorophyll-a but also control of phosphate and COD release which is very important phenomena in evaluating water quality in closed water like a reservoir and pond.

• 에너지공학
• /
• 제13권2호
• /
• pp.133-143
• /
• 2004

Simultaneous removal technology of particulate/NOx/SOx/HCl using CuO/3Al$_2$O$_3$ㆍ2SiO$_2$catalyst impregnated ceramic candle filters is an advanced air pollution process and provides significantly to reduce hazardous gases emitted from coal-fired power plant. This process uses a high-temperature catalytic filter for integrating SOx and HCl reduction through injection an alkali sorbent (such as hydrated lime or sodium bicarbonate), NOx removal through ammonia injection and selective catalytic reduction (SCR), and particulate collection on the catalytic filter surface. The advantages of the process include : compact integration of the emission control technologies into a single component; easy handling of dry sorbent and by-product; and improved SCR catalytic life due to lowered SOx, HCl and particulate levels. CuO/3Al$_2$O$_3$ㆍ2SiO$_2$ catalyst impregnated ceramic candle filters showed a possibility of simultaneous treatment from results which have ascertained high removal efficiency at various combined gases conditions, and in pilot plant test for 3 months, NO conversion was showed 90% over.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.341-344
• /
• 1997

A vitrification process is under development in KEPRI for the treatment of low-and medium-level radioactive waste. Although the project is for developing and building Vitrification Pilot Plant in Korea, one of KEPRI's concerns is the quality control of the vitrified glass. This paper discusses a methodology for the estimation of glass composition by on-line measurement of molten glass properties, which could be applied to the plant for real-time quality control of the glass product. By remotely measuring viscosity and density of the molten glass, the glass characteristics such as composition can be estimated and eventually controlled. For this purpose, using the database of glass composition vs. physical properties in isothermal three-component system of SiO$_2$-Na$_2$O-B$_2$O$_3$, a software TERNARY has been developed which determines the glass composition by using two known physical properties(e.g. density and viscosity).

• 한국물환경학회지
• /
• 제21권3호
• /
• pp.267-273
• /
• 2005

Dye wastewater generally contains strong color and non-biodegradable materials. Therefore, the conventional wastewater treatment plant can hardly meet the regulation of wastewater effluent water. In this study, a pilot plant of the conventional process followed by advanced oxidation process (AOP), was set up to treat the dying wastewater. The treatment efficiencies on the various candidate processes, such as ozone alone, UV alone, ozone/UV, $ozone/H_2O_2$, $H_2O_2/UV$ and $ozone/UV/H_2O_2$, were investigated in the various ozone and $H_2O_2$ doses. As the results, the $ozone/H_2O_2$ process, among the tested processes, showed the highest efficiency for removing color and $COD_{Cr}$. For color removal, the ozone alone process was enough without combining UV or $H_2O_2$. No significantly enhanced efficiency for removing color and $COD_{Cr}$ by UV irradiation was observed because of the very low transmittance of UV light in dye wastewater.