• 한국환경과학회지
• /
• 제6권6호
• /
• pp.659-670
• /
• 1997

차량 내부의 높은 휘발성 유기물질 농도와 이들 휘발성 유기물질의 독성 때문에 휘발성 유기물 질에 대한 차량 내부에서의 노출이 주요한 관심을 받고 있다. 본 연구에서는 115회의 도시 지역 (대구 광역시) 출퇴근과 9회의 정차 실험을 통해 상업용 공기정화기의 6 종류 휘발성 유기물질에 대한 제거 효율이 평가되었다. 네 종류의 운전 조건에서 수행된 정차 및 출퇴근 연구 결과, 본 연구에서 이용된 두 개의 시중 시판 차량용 공기정화기는 휘발성 유기물질에 대해 제거 효율이 없는 것으로 나타났다. 벤젠을 제외한 다섯 종류의 휘발성 유기물질의 농도는 최근 차량보다 오래된 차량 내부에서 높게 나타났다 (p<0.05). 본 연구에서 측정된 벤젠과 톨루엔의 평균 농도는 로스앤젤레스에서 측정된 값과 유사하게 나타났고, 그 이외의 미국내 비교지역의 측정 값보다는 높게 나타났다. 휘발성 유기물질에 대한 노출 및 해당 발암 위해성은 차량 내부에서 실외 공기의 약 8배 정도 높게, 그리고 실내 공기의 약 절반 정도로 산정 되었다.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.451-458
• /
• 2012

This study aims at the structural analysis with fatigue according to the configuration of railway vehicle wheel. Maximum equivalent stress or deformation is shown at the lower face in contact with wheel and rail. As model B has the maximum stress or deformation which becomes lower than model A, model B is shown to have more durability than model A. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of 0 to $-10^{11}$ Pa and the amplitude stress of 0 to $10^{10}$ Pa, the possibility of maximum damage becomes 3%. This stress state can be shown with 6 times more than the damage possibility of 'SAE Bracket history' or 'SAE transmission'. The structural result of this study can be effectively utilized with the design of railway vehicle wheel by prevention and durability against its damage.

• 동력기계공학회지
• /
• 제19권6호
• /
• pp.47-53
• /
• 2015

Korea is the geographic location during the summer, the temperature rising to $35^{\circ}C$ and winter temperature is $-15^{\circ}C$ to reduce the air temperature changes, such as relatively large compared to other countries. This increase or decrease of the harmful exhaust gas discharged from automobile substantially inconvenience a significant impact on the active side of the car engine temperature and exhaust gas reducing device receives a large impact on the atmospheric temperature is regulation to be different. However, domestic vehicle emissions test temperature of $20{\sim}30^{\circ}C$ is it does not reflect this situation the actual test temperature to accurately measure the exhaust gas volume of the vehicle is difficult. In this study, domestic automobile exhaust gas test conditions of a test temperature $20{\sim}30^{\circ}C$ various temperatures, including (35, 25, 0, -7, -15, $-25^{\circ}C$) under the two vehicles (2.0L MPI, 2.4 L GDI) as was discussed with respect to the exhaust gas characteristics of the vehicle according to the ambient temperature gas. As a result, domestic emissions test temperature of $25^{\circ}C$ than average conditions were temperature decreases greenhouse gas emissions and increase overall increased by up to 15 times higher. Air temperature and the engine exhaust gas inconvenience a direct effect on the activation temperature required in the reduction unit is determined to be an increase of emissions and greenhouse gases, and also an increase in the variety of lubricants based lubricating and viscosity reduction, such as the engine oil due to the low temperature of these result It is considered that shows the.

• 한국대기환경학회지
• /
• 제26권3호
• /
• pp.318-329
• /
• 2010

The purpose of this study was to develop the $PM_{2.5}$ source profiles for diesel and gasoline-powered vehicles, which contained mass abundances in terms of mass fraction of $PM_{2.5}$ of chemical species. Seven diesel-powered vehicles and nine gasoline-powered vehicles were sampled from a chassis dynamometer exhaust dilution system. The species measured were water-soluble ions, elements, elemental carbon (EC), and organic carbon (OC). From this study, the large abundances of EC (54.5%), OC (26.0%), ${SO_4}^{2-}$ (1.5%), ${NO_3}^-$ (0.8%), and S (0.6%) were observed from the diesel-powered vehicle exhaust showing that carbons were dominant species. The gasoline-powered vehicle exhaust emitted large abundances of OC (38.3%), EC (4.2%), ${SO_4}^{2-}$ (3.6%), ${NH_4}^+$ (3.5%), and ${NO_3}^-$ (3.0%). The abundances of ${SO_4}^{2-}$, ${NH_4}^+$, and ${NO_3}^-$ from gasoline vehicle were greater than those of diesel vehicle. The emissions of P, S, Ca, Fe, and Zn among trace elements for the gasoline vehicle were greater than 1% of the $PM_{2.5}$ mass unlike those for the diesel vehicle. Particularly, the fraction of Zn was five times higher from the gasoline vehicle than that from the diesel vehicle. The source profiles developed in this work were intensively examined by applying chemical mass balance model.

• ETRI Journal
• /
• 제28권6호
• /
• pp.796-798
• /
• 2006

This letter proposes a tapered stacked microstrip antenna for application in small unmanned aerial vehicles (UAVs), which has advantages in mountainous terrains. With its tapered structure and increased bandwidth designed to operate at the resonance frequency of 2.4 GHz, the proposed antenna improves directivity, accuracy, and precision of small UAVs. The test flight results show the proposed tapered antenna has a three times higher impedance capability of 350 MHz based on VSWR<2. The transmission pattern is also more reliable than that of previous antenna designs.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.155-163
• /
• 2000

A technology of full time four wheel drive(4WD) vehicle has been improved greatly, and the market share of full time 4WD has been extended steadily in recent days. The transfer case is an essential element in the 4WD automobile. In this paper, the details of electronically controlled transfer case is described. In order to achieve easy shifting, the shifting, the developed system automate the conversion of "$4\times2\longleftrightarrow4\times4(H)\longleftrightarrow4\times4(L)$". Furthmore, this system employs an chain drive type instead of gear drive type for drive type and synchromesh type instead of constant-mesh type for gear mesh type. Therefore, the developed transfer case is accomplished light-weight, low noise, and compact.d compact.

• 한국분무공학회지
• /
• 제17권4호
• /
• pp.185-191
• /
• 2012

Particulate matters (PM) that is generated by most diesel engine is regulated by the mass concentration measured by the conventional method it had been. Recently, Europe PMP (Particle Measurement Program) decided to start the regulation of vehicle's nano-sized particle number (PN) from the year of 2011 because of nano-particle's higher degree of harm to the human body. So firstly, the standard level of PN emission is introduced in the Euro 5/6 emissions regulation with a limit of $6{\times}10^{11}$ per km for light duty vehicle. Also KPMP(Korea Particle Measurement Program) was organized to copy quickly international technical trend. In this paper, it was investigated the nano-sized PN measurement characteristics for different particle generators between spray type and soot type. And the difference ratio between particle generators, the characteristic of PN concentration, counting efficiency and linearity was analyzed. Then, we make conclusions as followed. When particle diameter is increased, counting efficiency of two generators is decreased. Also Secondary calibration method is more higher 3% than Primary calibration method. Finally, SOF which is included in soot particles is not totally removed so it have great influence on test result of counting efficiency and linearity.

• 한국토양비료학회지
• /
• 제49권6호
• /
• pp.743-750
• /
• 2016

Recently, usage of UAV (Unmanned Aerial Vehicle) has increased in agricultural part. This study was conducted to classify onion and garlic using supervised classification of a fixed-wing UAV (Model : Ebee) images for evaluation of possibility about estimation of onion and garlic cultivation area using UAV images. Aerial images were obtained 11~12 times from study sites in Changryeng-gun and Hapcheon-gun during farming season from 2015 to 2016. The result for accuracy in onion and garlic image classification by R-G-B and R-G-NIR images showed highest Kappa coefficients for the maximum likelihood method. The result for accuracy in onion and garlic classification showed high Kappa coefficients of 0.75~0.97 from DOY 105 to DOY 141, implying that UAV images could be used to estimate onion and garlic cultivation area.

• 한국ITS학회 논문지
• /
• 제10권4호
• /
• pp.107-115
• /
• 2011

경찰청에서는 교통운영체계 선진화 방안의 일환으로 "비보호 좌회전" 운영 확대를 추진하고 있으며, 현재 기존 연구자료 및 편람 상 비보호좌회전 허용준거로는 교통사고건수, 차로수, 보행자교통량, 시계확보, 비보호 좌회전 차로수, 교통량(비보호 좌회전 교통량 ${\times}$ 대향직진 교통량) 등 6가지 세부기준이 제시되어있다. 그러나 실무적인 입장에서 비보호 좌회전 차량의 안전하고 원활한 통행을 확보하기 위해 무엇보다 대향 직진 교통류의 차량 사이에 일정 수준 이상의 시간적 간격(Gap-time)이 확보되어야 한다. 이에 본 연구에서는 교통류간(차량간) 행태를 고려한 미시적 측면인 간격수락 개념이 준거기준으로 반영되어야 한다는 전제를 두고 비보호 좌회전으로 운영중인 서울시내 6개 교차로를 대상으로 현황조사 및 동영상 촬영을 통해 비보호 좌회전 차량군의 교차로 통과시간값(T1)과 대향직진 차량군 사이의 Gap-time값(T2)과의 관계를 조사 분석하여 두 값 사이의 관계를 통계적 과정을 통해 유추하였다. 또한 표본수 부족의 한계를 극복하기 위해 미시적 분석 프로그램인 Vissim 을 이용한 모형분석을 통해 두 값 사이의 관계를 추가 분석하였다. 이에 교통운영체계 선진화 연구보고서에서 제시한 준거(안)과 더불어 비보호 좌회전 운영을 위한 새로운 기준으로 T1 값에 따른 적정 T2값 모형제시(T1값 - T2값 Table)를 통해 효율적인 비보호 좌회전 운영 확대에 도움을 줄 수 있을 것으로 기대해본다.

• 동력기계공학회지
• /
• 제20권6호
• /
• pp.93-98
• /
• 2016

Environmental problems are issued throughout all over the world and which are needed the strength management. In case of the diesel cars are also being developing and studying continuously about various after-treatments device such as EGR, LNT, SCR, DPF and DOC etc. which are used for decreasing $NO_X$ and PM. The air temperature goes up to $39^{\circ}C$ in summer and goes down to $-20^{\circ}C$ in winter because of the location. These changing of the temperature can effect to the engine and harmful exhaust gas discharged and it seems to make the increase - decrease different. The result of the evaluate while changing between the test-mode and the air temperature, which expresses that WLTC-mode is 2.2 times and FTP_75 mode is 4.1~6 times increase to the comparison NEDC-mode of the current regulation. The exhaust characteristic of $NO_X$ by the changing temperature increases in the low temperature and 4.3 times in $14^{\circ}C$ and 21.3 times in $-7^{\circ}C$ with maximum when it compares to $23^{\circ}C$. The fuel efficiency of the different weight car and engine with same data is about 5.7 % in maximum.