• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.261-268
• /
• 2017

In this paper, we propose an FSSH(Folded Slot Spherical Helix) magnetic dipole antenna with a form factor easy to build and study its radiation properties. The number of folded arms, the gap between them and the metal thickness are tuned to achieve relatively simple structure to realize whereas maintaining high radiation efficiency at an electrically small size. The proposed design shows wide radiation efficiency bandwidth and it is confirmed by circuit simulation that the non-Foster impedance matching techniques could be utilized for its practical use. The prototype of the proposed antenna is built with the aid of an SLS(Selective Laser Sintering) 3D printing technology. The measured result shows lower Q impedance characteristic due to high resistive loss of the copper tape joints.

• Journal of Contemporary Eastern Asia
• /
• v.14 no.1
• /
• pp.1-3
• /
• 2015

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.31-39
• /
• 2014

The helical pile is a manufactured steel pile consisting of one or more helix-shaped bearing plates affixed to a central shaft. This pile is installed by rotating the shaft into the ground to support structural loads. The advantages of helical piles are no need for boring or grout process, and ability to install with relatively light devices. The bearing capacity of the helical pile is exerted by integrating the bearing capacity of each helix plate attached to the steel shaft. In this paper, to estimate the bearing capacity of moderate-size helical piles, 6 types of helical piles were constructed with different shaft diameter, plate configuration and the penetration depth. A series of field loading tests was performed to evaluate the effect of helical pile configuration on the bearing capacity of helical pile, constructed in two different shaft diameters (i.e. 73 mm and 114 mm). In the same way, the diameter of bearing plate was also changed from 400mm to 250mm with one or three plates. As well, the penetration depth was varied from 3m to 6m to analyze the relation between the penetration depth and the bearing capacity. As a result, not only the increase of the shaft diameter, but also the number or diameter of helix bearing plates enhances the bearing capacity. Especially the configuration of the helix plate is more critical than the shaft diameter.

• Communications of the Korean Mathematical Society
• /
• v.35 no.3
• /
• pp.967-977
• /
• 2020

In this article, we find the necessary and sufficient condition for a proper biharmonic Frenet curve in the Lorentzian Sasakian space forms 𝓜³₁(H) except the case constant curvature -1. Next, we find that for a slant curve in a 3-dimensional Sasakian Lorentzian manifold, its ratio of "geodesic curvature" and "geodesic torsion -1" is a constant. We show that a proper biharmonic Frenet curve is a slant pseudo-helix with 𝜅² - 𝜏² = -1 + 𝜀₁(H + 1)𝜂(B)² in the Lorentzian Sasakian space forms x1D4DC³₁(H) except the case constant curvature -1. As example, we classify proper biharmonic Frenet curves in 3-dimensional Lorentzian Heisenberg space, that is a slant pseudo-helix.

• Journal of the Korean Mathematical Society
• /
• v.48 no.1
• /
• pp.159-167
• /
• 2011

We consider a curve $\alpha$= $\alpha$(s) in Minkowski 3-space $E_1^3$ and denote by {T, N, B} the Frenet frame of $\alpha$. We say that $\alpha$ is a slant helix if there exists a fixed direction U of $E_1^3$ such that the function is constant. In this work we give characterizations of slant helices in terms of the curvature and torsion of $\alpha$. Finally, we discuss the tangent and binormal indicatrices of slant curves, proving that they are helices in $E_1^3$.

• Honam Mathematical Journal
• /
• v.36 no.3
• /
• pp.475-492
• /
• 2014

In this study, we have investigated the possibility of whether any spacelike Frenet plane of a given space curve in Minkowski 3-space $\mathbb{E}_1^3$ also is any spacelike Frenet plane of another space curve in the same space. We have obtained some characterizations of a given space curve by considering nine possible case.

• The korean journal of orthodontics
• /
• v.41 no.3
• /
• pp.191-199
• /
• 2011

Objective: The purpose of this study was to investigate the stress distribution on the orthodontic mini-implant (OMI) surface and periodontal ligament of the maxillary first and second molars as well as the tooth displacement according to the OMI position in the dragon helix appliance during scissors-bite correction. Methods: OMIs were placed at two maxillary positions, between the first and the second premolars (group 1) and between the second premolar and the first molar (group 2). The stress distribution area (SDA) was analyzed by three-dimensional finite element analysis. Results: The maximal SDA of the OMI did not differ between the groups. It was located at the cervical area and palatal root apex of the maxillary first molar in groups 1 and 2, respectively, indicating less tipping in group 2. The minimal SDA was located at the root and furcation area of the maxillary second molar in groups 1 and 2, respectively, indicating greater palatal crown displacement in group 2. Conclusions: Placement of the OMI between the maxillary second premolar and the maxillary first molar to serve as an indirect anchor in the dragon helix appliance minimizes anchorage loss while maximizing the effect on scissors-bite correction.

• ALGAE
• /
• v.33 no.3
• /
• pp.279-290
• /
• 2018

Microalgae have been utilized in diverse industries including aquaculture. Among the microalgae, dinoflagellates are known to have various bioactive compounds, and thus the interest in their application to industry has increased. In order to test their potential as food materials for aquaculture animals, the crude protein contents and compositions of amino acids of six dinoflagellates Heterocapsa rotundata (family Heterocapsaceae), Ansanella granifera (Suessiaceae), Alexandrium andersonii (Ostreopsidaceae), Takayama tasmanica (Brachidiniaceae), Takayama helix, and Gymnodinium smaydae (Gymnodiniaceae) belonging to diverse families were analyzed. The percentage of the amount of the crude protein relative to dry weight of T. tasmanica was the highest (65%) and that of A. andersonii was the lowest (26%). However, the highest percentage of total detected amino acids in crude protein was found in A. andersonii (98.2%). In all six dinoflagellates, glutamic acid was the most dominant amino acid in crude protein. However, the second main amino acid was aspartic acid for H. rotundata, A. granifera, T. helix, and G. smaydae, but were arginine and leucine for A. andersonii and T. tasmanica, respectively. Furthermore, T. tasmanica and T. helix did not have taurine and gamma-aminobutyric acid, whereas the other dinoflagellates possessed them. The percentages of essential amino acid contents of the dinoflagellates met the requirement levels for juvenile shrimps. In addition, the dinoflagellates were not toxic to the brine shrimp Artemia salina. Compared with the other microalgae reported so far, H. rotundata and A. andersonii can be used for arginine-rich diets, T. tasmanica for valine and leucine-rich diets, A. granifera for histidine-rich diets, T. helix for threonine-rich diets, and G. smaydae for lysine-rich diets. Therefore, based on their biochemical composition and toxicity to Artemia, the dinoflagellates could be used as essential amino acid sources for cultivating animals in the aquaculture industry.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.561-562
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.629-633
• /
• 2002