• KSBB Journal
• /
• v.19 no.4
• /
• pp.321-326
• /
• 2004

Microparticles of an inclusion complex between itraconazole and 2-hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta}$-CD) were prepared using an environmentally-benign supercritical anti-solvent (SAS) process. In order to evaluate the degree of complexation, the thermal behavior of solid micro particulate complexes was investigated using differential scanning calorimetry. The experimental results obatined for the solubility and dissolution rate of the microparticulate inclusion complexes in a buffer solution of pH 1.2 showed that the complexation of itraconazole with HP-${\beta}$-CD results in a significant increase in the solubility and dissolution rate of itraconazole. For the microparticulate itraconazole/Hp-${\beta}$-CD inclusion complexes prepared by the SAS process, about 80% of itraconazole was found to dissolve in the buffer solution. Our experimental results confirmed that the SAS process is a promising method for the preparation of microparticles of water-insoluble drug/cyclodextrin inclusion complexes.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.3
• /
• pp.146-151
• /
• 2004

Cyclodextrin compounds including 2-hydroxypropyl-β-cyclodextrin(β-HPCD) though to be accelerate the biodegradation of PAHs molecule by increasing solubility of PAHs through detaining PAHs in their's cavity. However, only this mechanism is not sufficient to explain the enhancement of PAHs biodegradation by β-HPCD. To find out possible additional role of β-HPCD in the enhancement of PAHs biodegradation, biodegradation rates of pyrene and benzo[a]pyrene (B[a]P) by a PAHs degrading Novosphingobium pentaromtivorans US6-1 strain were compared between with and without addition of β-HPCD. Changes of bacterial biomass were also measured simultaneously. In addition catechol 1,2-dioxygenase activity was determined depending on pre-incubation conditions. As a result, β-HPCD accelerate the degradation rate of pyrene by strain US6-1 and especially the β-HPCD amendment was obligatory for the degradation of B[a]p. Bacterial biomass was responsible for β-HPCD, however, PAHs compounds such as pyrene and B[a]P did not contribute to the bacterial biomass. Catechol 1,2-dioxygenase specific activity of US6-l cells pre-cultured in MM2 medium containing l％ β-HPCD was higher than that of cells pre-cultured in ZoBell medium. The former case also showed similar activity compared to that of cells serially starved in MM2 medium after grown in ZoBell medium. These results imply that the presence of β-HPCD accelerate the degradation of PAHs by increasing the bacterial biomass as well as by increasing the water solubility of PAHs.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.4
• /
• pp.267-271
• /
• 2000

The effect of cyclodextrins on the solubility and stability of aspalatone (acetylsalicylic acid maltol ester, AM, CAS 147249-33-0), which has been recently found to have an antithrombotic effect, was investigated. The addition of ${\beta}-cyclodextrin\;({\beta}-CD),\;dimethyl-{\beta}-cyclodextrin\;(DMCD)\;or\;2-hydroxypropyl-{\beta}-cyclodextrin\;(HPCD)$ to the aqueous solution increased the solubility of AM concentration-dependently. From the phase solubility diagram, stability constants for $AM-{\beta}-CD$, -DMCD or -HPCD complexes were calculated to be 43.1, 78.3 and $53.0\;M^{-1}$. The addition of ${\beta}-CD$, DMCD or HPCD to AM solution retarded the degradation rate of AM in the acidic region. However, ${\beta}-CD$ and HPCD rather acted as an accelerator of degradation in the neutral and alkaline regions. DMCD had a stabilizing effect at all pHs studied.

• YAKHAK HOEJI
• /
• v.45 no.4
• /
• pp.357-365
• /
• 2001

The purpose of this study is to investigate the influence of cyclodextrins (CDs) and different acids on the solubility of fluconazole, and o formulate its more concentrated parenteral aqueous solution. Solubility studies of fluconazole with 7-CD, 2-hydroxypropyl-$\beta$-CD (HPCD), sulfobutyl ether $\beta$-CD (SBCD) and dimethyl-$\beta$-CD(DMCD) were performed. The aqueous solubility of fluconazole was measured in different concentrations of different acids with or without addition of CDs. Solubility of fluconazole increased in the rank order of $\beta$-CD$^1$H-NMR studies confirmed the formation of an inclusion complex of fluconazole with HPCD. It was also shown by the NMR studies that the complex formed was a 1:1 complex. Among the different acids used, maleic acid and phosphoric acid increased solubility of fluconazole. The lower the pH of solution is, the more fluconazole dissolved, regardless of acids. Addition of HPCD (50 mM) to acid solutions increased the solubility about two times. New fluconazole injections at a dose of 10 mg/ml could be prepared in aqueous solutions containing 10% HPCD or 15% SBCD. These parenteral solutions did not form any precipitates at 4$^{\circ}C$ and was very stable at elevated temperatures. These results demonstrate that it is possible to develop a parenteral aqueous solution of fluconazole with a smaller injection volume using HPCD or SBCD.

• YAKHAK HOEJI
• /
• v.56 no.3
• /
• pp.164-172
• /
• 2012

This study was aimed to increase the solubility, dissolution and permeation rates of atorvastatin calcium (ATC) using bile salt and/or 2-hydroxypropyl-${\beta}$-cyclodextrin ($HP{\beta}CD$). From solubility studies, sodium deoxycholate (SDC) among bile salts studied was found to have the highest solubilizing effect on ATC ($4.4{\pm}0.4$ mg/ml), and the order of increasing solubility was SDC>sod. cholate>sod. glycocholate>sod. taurodeoxycholate>sod. taurocholate>conjugated bile acid. ATC solid dispersions were prepared at various ratios of drug to SDC and/or $HP{\beta}CD$, and evaluated by differential scanning calorimetry (DSC), dissolution studies and dissolution-permeation studies. DSC curves showed amorphous state of ATC in the physical mixture and solid dispersion. Dissolution rates of ATC-SDC solid dispersions and physical mixture were markedly increased at pH 6.8, but decreased at pH 1.2 with greater proportions of SDC due to the precipitation of SDC, compared with that of drug alone. On the other hand, dissolution rates of ATC-$HP{\beta}CD$ solid dispersion and physical mixture at pH 1.2 were varied with the ratio of drug to carriers. From duodenal permeation studies, it was found that fluxes of ATC (donor dose: 0.5 mg/3.5 ml) in the presence of 25 mM sodium glycocholate, SDC, sod. cholate and sod. taurocholate $(5.7{\pm}0.9$, $5.6{\pm}0.9$, $4.8{\pm}0.7$ and $4.6{\pm}0.9\;{\mu}g/cm^2/hr$, respectively) were enhanced, compared with drug alone ($3.4{\pm}0.9\;{\mu}g/cm^2/hr$). In the dissolution-permeation studies, 1 : 9 : 10 (w/w) ATC-SDC-$HP{\beta}CD$ solid dispersion increased the flux 2.2 times, compared with 1 : 5 : 4 (w/w) ATC-lactose-corn starch mixture as control. In conclusion, solid dispersions with bile salt and $HP{\beta}CD$ were found to be an effective means for increasing the dissolution and permeation rates of ATC.

• Archives of Pharmacal Research
• /
• v.21 no.5
• /
• pp.503-507
• /
• 1998

Percutaneous absorption and model membrane variations of melationin (MT) in aqueous-based propylene glycol and $2-hydroxypropyl-{\beta}-cyclodextrin $vehicles were investigatted. the excised hairless mouse skin (HMS) and two synthetic ethylene vinyl acetate (EVA) and microporous polyethylene (MPE) were selected as a model membrane. the solubility of MT was determined by phase equilibrium study. the vertical $Franz{\circledR}$ type cell was used for diffusion study. The concentration of MT was determined using reverse phse HPLC system. The MT solubility was the highest in a mixture of PG and $2-HP{\beta}CD$. The percutaneous absorption of MT through excised HMS increased as the solubility increased. However, the permeability coefficient decreased and then slightly increased in mixture of PG and $2-HP{\beta}CD$. On the other hand, both flux and permeability coefficient through EVA membrane decreased as the solubility increased. No MT was detected over 12 h after starting diffusion through MPE membrane. The flux of MT was dependent on the type of membrane selected. Flux of MT was greatest in excised HMS followed by EBA and MPE membrane. Flux of MT through EVA membrane was 5-20 times lower when compared to excised HMS. Interestingly, volumes of donor phase when MPE membrane was used, significantly increased during the study period. the HMS might be applicable to expect plasma concentration of MT in human subjects based on flux and pharmacokinetic parameters as studied previously. the current studies may be applied to deliver MT transdermally using aqueous-based vehicles and to fabricate MT dosage forms.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.3
• /
• pp.227-237
• /
• 1995

Omeprazole(OMP) complexes such as inclusion complexes of OMP with $hydroxypropyl-{\beta}-cyclodextrin$(HPCD) and ${\beta}-cyclodextrin({\beta}-CD)$, OMP-cholestyramine(CHL) and OMP-ethylenediamine(OMP-ED) were prepared, respectively. The partition coefficients in Witepsol H-15 /pH 7.4 phosphate buffer solution of OMP complexes$(OMP-HPCD;\;3.69{\pm}0.26,\;OMP-{\beta}-CD;\;4.08{\pm}0.21,\;OMP-CHL;\;4.36{\pm}0.25\;and\;omeprazole\;sodium(OMP-Na);\;3.64{\pm}0.37)$ were higher than that of OMP $(2.66{\pm}0.47)$. OMP was not completely dissolved until even 3 hrs, but all the OMP complexes studied were released about 100% in 20 min. The rectal suppositories containing OMP or each above OMP complex were prepared using Witepsol H-15 base, and their dissolution and stability were examined, and pharmacokinetic study were investigated after their rectal administrations to the rabbits. While the suppository containing OMP was released only less than 60% in 150 min, $OMP-{\beta}-CD$, OMP-CHL, OMP-Na and OMP-ED suppositories were all released about 65% in 20 min. Especially, OMP-HPCD suppository released OMP about 70% in 10 min. All the additives such as sodium laurylsulfate, eglumine, arginine and PVP increased drug release from OMP-HPCD suppository to some extent. The decomposition rate constants of OMP in the suppositories were $9.117{\times}10^{-3}\;day^{-l}$ for OMP suppository, $2.121{\times}10^{-2}$ for OMP-HPCD, $1.607{\times}10^{-2}$ for $OMP-{\beta}-CD$, $9.26{\times}10^{-3}$ for OMP-Na, $6.769{\times}10^{-3}$ for OMP-CHL and $5.58{\times}10^{-3}\;day^{-l}$ for OMP-ED suppository, respectively. Additives such as arginine, eglumine and ED had some stabilizing effect for OMP-HPCD, OMP-CHL and OMP-Na suppositories, respectively. After 6 month-storage at $30^{\circ}C$, 75% RH, OMP-CHL suppository was most stable. The values of Tmax for OMP-HPCD and OMP-Na suppositories were $11.7{\pm}2.36\;and\;11.4{\pm}2.56\;min$, respectively. The values of Cmax for OMP-HPCD and OMP-CHL suppository were $2.31\;{\mu}g/ml\;(p<0.01)\;and\;1.89\;{\mu}g/ml\;p<0.01)$, respectively. The values of AUC for OMP and $OMP-{\beta}-CD$ suppository were $61.9{\pm}25.79\;and\;68.6{\pm}29.48\;{\mu}g\;{\cdot}\;min/ml$, and the corresponding values for OMP-HPCD and OMP-CHL were $106.1{\pm}43.16\;(p<0.05)\;and\;127.3{\pm}42.52\;{\mu}g\;{\cdot}\;min/ml(p<0.01)$, respectively. The above results indicate the OMP-HPCD and OMP-CHL suppositories have the excellent bioavailabilties in vivo study.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.719-724
• /
• 2015

Isoliquiritigenin (ILG) is a hydrophobic component in licorice and has a variety of pharmaceutical and biological activities. In this study, we prepared an isoliquiritigenin-hydroxypropyl-${\beta}$-cyclodextrin (ILG/HP-${\beta}$-CD) complex by freeze-drying method to enhance its water solubility. The complex was characterized by phase solubility studies, DSC, SEM, and 1H NMR. Antimicrobial activities against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) were evaluated by broth dilution method. The results showed that the stoichiometry of ILG/HP-${\beta}$-CD complex was 1 : 1. The antimicrobial activity of ILG/HP-${\beta}$-CD complex was higher than that of using free ILG against S. aureus and E. coli. Therefore, we suggest that ILG/HP-${\beta}$-CD complex may be used as a natural antiseptic and could potentially replace synthetic preservatives in cosmetic and food industries.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.2961-2965
• /
• 2012

Mesoporous carbons with tailored pore size were prepared by using sucrose as the carbon source and silicas as the templates. The silica templates were obtained from a hydroxypropyl-${\beta}$-cyclodextrin-silica hybrids using ammonium perchlorate oxidation at different temperatures to remove the organic matter. The structures and surface chemistry properties of these carbon materials were characterized by $N_2$ adsorption, TEM, SEM and FTIR measurements. The catalytic performances of these carbon materials were investigated through the reduction of nitroaromatic using hydrazine hydrate as the reducing agent. Compared with other carbon materials, such as active carbon, and carbon materials from the silica templates obtained by using calcination to remove the organic matter, these carbon materials exhibited much higher catalytic activity, no obvious deactivation was observed after recycling the catalyst four times. Higher surface area and pore volume, and the presence of abundant surface oxygen-containing functional groups, which originate from the special preparation process of carbon material, are likely responsible for the high catalytic property of these mesoporous carbon materials.

• YAKHAK HOEJI
• /
• v.37 no.3
• /
• pp.216-227
• /
• 1993

Complex formations of practically insoluble antelmintic drugs such as mebendazole (MBZ), albendazole (ABZ) and flubendazole (FBZ) with dimethyl-$\beta$-cyclodextrin (DM-$\beta$-CyD) and 2-hydroxypropyl-$\beta$-cyclodextrin (HP-$\beta$-CyD) together with $\alpha$-, $\beta$- and $\gamma$-cyclodextrins(CyDs) in duffered solutions were investigated by solubility method. $A_{L}$ type phase solubility diagrams were obtained in all cases except for the complexation (B$_{s}$, type) of FBZ with $\gamma$-CyD. The highest stability constants were obtained with DM-$\beta$-CyD, followed by $\alpha$-CyD > $\beta$-CyD > HP-$\beta$-CyD > $\gamma$-CyD for ABZ, and HP-$\beta$-CyD > $\gamma$-CyD > $\beta$-CyD > $\alpha$-CyD for FBZ at pH 1.2. On the other hand, solid dispersion systems of ABZ and FBZ with $\beta$- and DM-$\beta$-CyDs were prepared by solvent evaporation method and evaluated by dissolution, differential thermal analysis and powder x-ray diffractometry. The dissolution rates of ABZ- and FBZ-DM-$\beta$-CyD solid dispersions were much faster than those of drugs alone, corresponding physical mixtures and tablets on market both at pH 1.2 and 6.8. Although dissolution rates of all samples at pH 6.8 were by far lower than those obtained at pH 1.2, as explained by pH-solubility profiles for ABZ and FBZ, the dissolution rates at pH 6.8 of ABZ from $\beta$- and DM-$\beta$-CyD solid dispersions exceeded the respective equilibrium solubility (23.9 $\mu\textrm{g}$/ml). Fast dissolution of ABZ from solid dispersions with CyDs was attributed to the reduction of drug crystallinity and particle size which was supported by DTA and powder x-ray diffractometry. Consequently these results suggest that solid dispersion systems with CyDs may provide useful means to markedly enhance the solubility and dissolution of benzimidazole antelmintic drugs.