• Clinics in Shoulder and Elbow
• /
• v.18 no.1
• /
• pp.36-42
• /
• 2015

Background: Repair of superior labral anterior to posterior (SLAP) lesion in patients older than 40 years is controversial. The purpose of this study was to evaluate clinical outcomes of arthroscopic repair of SLAP lesions between younger and older patient groups. Methods: We reviewed 50 patients with isolated type II SLAP lesions who underwent arthroscopic repair. Patients were divided into 2 groups: group 1 included 20 patients aged <40 years, and group 2 included 30 patients aged ${\geq}40years$. Functional outcome at the final follow-up was assessed using a visual analog scale for pain and satisfaction, American Shoulder and Elbow Surgeons form, Constant score, University of California at Los Angeles score, and periodic change in range of motion (ROM). Anatomical outcome was evaluated using computed tomography (CT) arthrography at least 1 year after surgery. Results: No significant differences in functional scores or postoperative ROM were observed between the 2 groups. In group 2, later recovery of ROM (forward flexion, p=0.025; internal rotation, p=0.034) and lower satisfaction score (p=0.06) were observed for atraumatic patients (n=16) compared to patients with traumatic injury (n=14). Fifteen patients in group 1 (15/17, 88%) and 21 patients in group 2 (21/26, 81%) demonstrated a healed labrum on postoperative CT arthrography, and this difference was not significant. Conclusions: The results of this study suggest that arthroscopic repair of type II SLAP lesions can yield good functional and anatomical outcomes regardless of age, if patient selection is adequate. However, the delay in ROM recovery and lower satisfaction, particularly in older patients without traumatic injury, should be considered.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.2
• /
• pp.77-84
• /
• 2020

We performed high-resolution three-dimensional global magnetohydrodynamic (MHD) simulations to study the interaction between the Earth's magnetosphere and a prolonged steady southward interplanetary magnetic field (IMF) (Bz = -2nT) and slow solar wind. The simulation results show that dayside magnetic reconnection continuously occurs at the subsolar region where the magnetosheath magnetic field is antiparallel to the geomagnetic field. The plasmoid developed on closed plasma sheet field lines. We found that the vortex was generated at the magnetic equator such as (X, Y) = (7.6, 8.9) R_E due to the viscous-like interaction, which was strengthened by dayside reconnection. The magnetic field and plasma properties clearly showed quasiperiodic variations with a period of 8-10 min across the vortex. Additionally, double twin parallel vorticity in the polar region was clearly seen. The peak value of the cross-polar cap potential fluctuated between 17 and 20 kV during the tail reconnection.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.5
• /
• pp.692-698
• /
• 2010

This study investigated anti-diabetic activity of Kocat-D1, which is a currently used traditional medicine for treatment of diabetes in Shandong, China. Insulin sensitizing activity was observed in a cell-based glucose uptake assay using 3T3-L1 adipocytes. The treatment of 0.2 mg/mL of hot water extract of Kocat-D1 with 0.2 nM insulin was associated with a significant increasing in glucose uptake ($165.0{\pm}0.7%$) over the treatment of 0.2 nM insulin. C57BL/KsJ-db/db mice (8 weeks of age) were separated into 3 groups: normal control (control, db/+ mice untreated), diabetic control (DM control, db/db mice untreated), Kocat-D1 (db/db mice treated with Kocat-D1 extract 350 mg/kg/day). After 16 weeks of treatment, body weight and total diet intake of Kocat-D1 group were significantly lower than DM control groups. Blood glucose levels of the Kocat-D1 group ($14.7{\pm}1.4\;mmol/L$) were significantly lower compared to the DM control group ($27.1{\pm}0.2\;mmol/L$). Furthermore, insulin level was significantly increased in the Kocat-D1 group ($0.17{\pm}0.02\;ng/mL$) compared with the DM control group ($0.05{\pm}0.02\;ng/mL$). The glomeruli in kidney was stained using periodic acid-shiff base (PAS) for confirming collagen accumulation. The glomeruli in kidney of Kocat-D1 group had significantly reduced PAS-positive compared with that of DM control.

• Earthquakes and Structures
• /
• v.3 no.2
• /
• pp.169-180
• /
• 2012

The performance of pure friction isolation system with respect to the frequency bandwidth of excitation and the predominant frequency is investigated. A set of earthquake ground motions (artificial as well as recorded [with different combinations of magnitude-distance and local site geology]) is considered for investigating effectiveness of pure friction isolators. The results indicate the performance of pure friction base isolated system does not only depend upon coefficient of friction and mass ratio but the stick-slip behaviour depends upon the frequency content of the excitation as well. Slippage prevails if the excitation frequency lies in a suitable frequency range. This range widens with increasing mass ratio. For larger mass ratios, the sliding effect is more pronounced and the maximum acceleration response is further reduced in the neighbourhood of frequency ratio (${\omega}/{\omega}_n$) of unity. The pure friction isolation system is effective in the case of broadband excitations only and that too, in the acceleration sensitive range of periods. The pure friction system is not effective for protection against narrow band motions for which the system response is quasi-periodic.

• ETRI Journal
• /
• v.29 no.2
• /
• pp.143-152
• /
• 2007

In this paper, we propose a time-varying modified minimum mean-squared error (MMSE) detector for the detection of higher data rate signals in a multirate asynchronous code-division multiple-access (CDMA) system which is signaled in a fast Rayleigh fading channel. The interference viewed by a higher data rate symbol will be periodic due to the presence of a lower data rate symbol which spans multiple higher data rate symbols. The detection is carried out on the basis of a modified MMSE criterion which incorporates differential detection and the ratio of channel coefficients in two consecutive observation intervals inherently compensating the fast variation of the channel due to fading. The numerical results obtained by the MMSE detector with time-varying detection show around 3 dB (M=2) and 6 dB (M=4) performance improvement at a BER of $10^{-3}$ in the AWGN channel, while introducing more computational complexity than the MMSE detector without time-varying detection. At a higher $E_b/N_0$, the proposed scheme can achieve a BER of approximately $10^{-3}$ in the presence of fast channel variation which is an improvement over other schemes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.84-84
• /
• 2010

In this study, we report on the novel lithographic patterning method to fabricate organic-semiconductor devices based on photo and e-beam lithography with well-known silicon technology. The method is applied to fabricate pentacene-based organic field effect transistors. Owing to their solubility, sub-micron sized patterning of P3HT and PEDOT has been well established via micromolding in capillaries (MIMIC) and inkjet printing techniques. Since the thermally deposited pentacene cannot be dissolved in solvents, other approach was done to fabricate pentacene FETs with a very short channel length (~30nm), or in-plane orientation of pentacene molecules by using nanometer-scale periodic groove patterns as an alignment layer for high-performance pentacene devices. Here, we introduce the atomic layer deposition of $Al_2O_3$ film on pentacene as a passivation layer. $Al_2O_3$ passivation layer on OTFTs has some advantages in preventing the penetration of water and oxygen and obtaining the long-term stability of electrical properties. AZ5214 and ma N-2402 were used as a photo and e-beam resist, respectively. A few micrometer sized lithography patterns were transferred by wet and dry etching processes. Finally, we fabricated sub-micron sized pentacene FETs and measured their electrical characteristics.

• Journal of Powder Materials
• /
• v.26 no.2
• /
• pp.119-125
• /
• 2019

Piezoelectric energy harvesting technology is attracting attention, as it can be used to convert more accessible mechanical energy resources to periodic electricity. Recent developments in the field of piezoelectric energy harvesters (PEHs) are associated with nanocomposites made from inorganic piezoelectric nanomaterials and organic elastomers. Here, we used the $BaTiO_3$ nanoparticles and piezoelectric poly(vinylidene fluoride) (PVDF) polymeric matrix to fabricate the nanocomposites-based PEH to improve the output performance of PEHs. The piezoelectric nanocomposite is produced by dispersing the inorganic piezo-ceramic nanoparticles inside an organic piezo-polymer and subsequently spin-coat it onto a metal plate. The fabricated organic-inorganic piezoelectric nanocomposite-based PEH harvested the output voltage of ~1.5 V and current signals of ~90 nA under repeated mechanical pushings: these values are compared to those of energy devices made from non-piezoelectric polydimethylsiloxane (PDMS) elastomers and supported by a multiphysics simulation software.

• Steel and Composite Structures
• /
• v.31 no.2
• /
• pp.187-199
• /
• 2019

This paper presents the semi-analytical development of the dynamic instability behavior and the dynamic response of functionally graded (FG) cylindrical shallow shell panel subjected to different type of periodic axial compression. First, in prebuckling analysis, the stresses distribution within the panels are determined for respective loading type and these stresses are used to study the dynamic instability behavior and the dynamic response. The prebuckling stresses within the shell panel are the same as applied in-plane edge loading for the case of uniform and linearly varying loadings. However, this is not true for the case of parabolic loadings. The parabolic edge loading produces all the stresses (${\sigma}_{xx}$, ${\sigma}_{yy}$ and ${\tau}_{xy}$) within the FG cylindrical panel. These stresses are evaluated by minimizing the membrane energy via Ritz method. Using these stresses the partial differential equations of FG cylindrical panel are formulated by applying Hamilton's principal assuming higher order shear deformation theory (HSDT) and von-$K{\acute{a}}rm{\acute{a}}n$ non-linearity. The non-linear governing partial differential equations are converted into a set of Mathieu-Hill equations via Galerkin's method. Bolotin method is adopted to trace the boundaries of instability regions. The linear and non-linear dynamic responses in stable and unstable region are plotted to know the characteristics of instability regions of FG cylindrical panel. Moreover, the non-linear frequency-amplitude responses are obtained using Incremental Harmonic Balance (IHB) method.

• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.59-65
• /
• 2023

Objectives: Epidemiological evidence linking long working hours and shift work to metabolic syndrome remains inadequate. We sought to evaluate the impact of reducing working hours on metabolic syndrome. Methods: We compared the prevalence of metabolic syndrome among male manual workers in a manufacturing company (N = 371) before and after the introduction of policy to reduce daily work hours from 10 to 8 hours. Components of metabolic syndrome were measured in periodic health examinations before the intervention, 6-9 months after, and 1.5-2 years after the intervention. Generalized estimating equation models were used to estimate changes in the prevalence of metabolic syndrome. Analyses were stratified by day work versus shift work. Results: The results showed a significantly decreased prevalence of metabolic syndrome 6-9 months following the intervention in day workers (risk ratio = 0.68, 95% confidence interval 0.52-0.88), but the benefit disappeared after 1.5-2 years. Shift workers showed a decreased prevalence of metabolic syndrome for the whole follow-up duration after the intervention, although the change was not statistically significant. Conclusion: Reducing working hours was associated with short-term improvement in metabolic syndrome in male manual workers.

• Membrane Journal
• /
• v.12 no.1
• /
• pp.8-20
• /
• 2002

In this study using $N_2$-back flushing, which wwas not the general back-flushing method of membranes, the discharged wastewater from a paper plant was filtrated by 4 kinds of tubular carbon ceramic ultrafiltration membranes. We could in vestigate effects of $N_2$-back flushing period, transmembrane pressure (TMP)and flow rate and find optimal operating conditions. The $N_2$-back flushing time (BT) was fixed at 40 sec, filtration times (FT) were changed in 4~32 min, TNP in $1.0~3.0kg_f/cm^2$ the flow celocities in 0.53~1.09cm/s. The optimal conditions were discussed in the viewpoints of dimensionless permeate flux ($J/J_0$), toal permeate volume ($V_T$) and resistance of membrane fouling ($R_f$). Optimal back-flushing period was BT/FT=0.167 (FT=8 min ), in which more $V_T$ was obtained than that in BT/FT=0.083 (FT=4 min) which was the most friquent back-flushing condition. Then rising TMP should increase the driving force, and more $V_T$ could be accumulated. And rising flow rate should decrease membrane fouling increase permeate flux, and more $V_T$could be produced. Average rejection rates of pollutants were higher than 95% for turbidity and 45~83% for $COD_{Cr}$, but rejection rates of total dissolved solid (TDS) were lower than 10%.