• 대한치과보철학회지
• /
• 제60권2호
• /
• pp.135-142
• /
• 2022

목적: 이번 연구의 목적은 단일구조 지르코니아(monolithic zirconia) 크라운의 서로 다른 부위에서, 감소된 지르코니아의 두께가 파절 저항성에 미치는 복합적인 영향을 평가하기 위한 것이다. 재료 및 방법: 실험을 위해 7개의 니켈-크롬 다이를 제작하였다. 다이는 하악 제 1대구치를 치아 형성한 지대치 3D 모델을 바탕으로 제작되었다. 지대치는 1.5 mm 교합면 삭제를 시행하였고, 변연은 1.0 mm의 deep chamfer로 형성하였다. 이 지대치 형태를 바탕으로 지르코니아 블록(Luxen Zirconia)를 사용하여, 교합면 두께는 0.3 mm, 0.5 mm, 1.5 mm, 축면 두께는 0.3 mm, 0.5 mm, 1.0 mm로 설정한 63개의 지르코니아 크라운을 제작하였다. 이 크라운은 니켈 크롬 다이에 레진 시멘트를 이용하여 접착하였다. 그 다음, electronic universal testing machine을 사용하여 크라운이 파절될 때까지 load-to fracture 시험을 진행하였다. 이후 scanning electron microscope (SEM)를 사용하여 크라운의 파절 형태를 관찰하였다. 통계 분석을 위해 Two-way ANOVA 방법을 사용하였고, 이에 대하여 Tuckey HSD test로 사후 검정을 시행하였다(P < .05). 결과: 모든 지르코니아 크라운의 평균 파절 저항 값은 구치부의 평균 저작력보다 큰 값을 나타냈다. 또한 Two-way ANOVA 결과, 지르코니아 크라운의 교합면 두께와 축면 두께는 파절 저항에 통계적으로 유의한 영향을 미치는 것으로 나타났다(P < .05). 그러나, 지르코니아의 축면 두께가 0.5 mm 이상일 때, 파절 저항에 미치는 영향은 통계적으로 유의한 차이를 보이지 않았다. 나타난 파괴 양상은 균열의 전파 양상에 따라 크라운의 부분 파절 또는 완전 파절로 나타났다. 결론: 이번 연구의 한계 내에서, 극도로 감소된 두께를 가진 CAD-CAM 단일구조 지르코니아 크라운은 구치부 교합력을 견딜 수 있는 적절한 파절 저항을 보였다. 또한, 지르코니아 크라운의 교합면 두께와 축면 두께는 파절 저항에 유의미한 영향을 나타냈으며 복합적인 결과를 보였다.

• 대한치과기공학회지
• /
• 제28권2호
• /
• pp.331-346
• /
• 2006

Free-end partial dentures, which are supported by teeth surrounded by dental root membranes and elastic mucous membrane tissues, may cause stress to the abutment teeth due to external force imposed on the denture base, increase the mobility of the abutment teeth, and bring about a change in the periodontal tissue. General retainers used in partial dentures are categorized into clasp, attachment, and Konus crown. Stress imposed on the abutment teeth and mobility of the denture base have relations with the lifetime of a crown and abutment teeth, and have direct relations with the chewing ability. Thus, a need arises to make a comparative analysis of stress of the three direct retainers on the abutment teeth and interpret the mobility of the denture base. This study designed three kinds of removable partial dentures (one kind of attachment partial denture, one kind of Konus crown partial denture, and one kind of clasp partial denture), and fabricated Dentiforms of bilateral partial dentures (Kennedy Class I) with lower left 1st premolar and lower right 1st and 2nd premolars being as the abutment teeth. A strain gauge was installed in the mesial and distal surface of the lowerr left 1st premolar (No. 34) of the fabricated dentiform and in the lower part of the denture base, and installed were a clasp partial denture, an attachment partial denture, and a Konus crown partial denture. Then, the vertical static load of 5kgf and 7.5kgf at the occlusion surface of the lower left No. 6 molar was generated for a total of 20 frequencies of load each using a push-full gauge, and thus a change in the output of the strain gauge was measured. With the respective application of Konus crown, attachment and RPI clasp in the free-end partial denture, surveyed was the distribution of stress imposed on the abutment teeth and the denture base according to the location of occlusion force load so as to come up with the following results. 1. Konus crown and attachment partial dentures generated much stress, and more stress on the abutment teeth than RPI clasp dentures did. Attachment dentures tended to further intensify stress on the abutment teeth than Konus crown dentures did. 2. Attachment dentures and Konus dentures imposed less stress on the denture base than RPI clasp dentures did. There was no stress difference between Attachment and Konus crown dentures. 3. Dentures that were designed with the application of retainers using sturdy linkage methods tended to be less mobile.

• 대한치과의사협회지
• /
• 제49권11호
• /
• pp.660-669
• /
• 2011

Er: YAG laser irradiation utilizing the newly developed RCLase side-firing spiral tip was used for the cleansing of root canals following their bio-mechanical preparation with ProTaper Ni-Ti files. The distal and palatal roots of 20 freshly extracted molar teeth were instrumented to size F3 with ProTaper files. In the experimental group (10 teeth) the pulp chamber and the root canals were filled with EDTA 17% and the root canals were lased for 30 s using the Er: YAG laser irradiation at 600 mJ per pulse and a frequency of 12 Hz. In the control group (10 teeth) the root canals were not lased. Scanning electron microscope analysis showed clean wall surfaces of the lased root canals with open dentinal tubules, free of smear layer and debris. In the scanning electron microscope photographs of the walls of the non-lased root canals a considerable amount of debris could be detected. It appears that an efficient cleansing of the root canal system can be achieved by using the Er: YAG laser irradiation with the RCLase Side-firing Spiral Tip following bio-mechanical preparation of the root canal with Ni-Ti Taper files.

• 대한치과교정학회지
• /
• 제41권6호
• /
• pp.423-430
• /
• 2011

Objective: To evaluate the extent and aspect of stress to the cortical bone after application of a lateral force to a two-component orthodontic mini-implant (OMI, mini-implant) by using three-dimensional finite element analysis (FEA). Methods: The 3D-finite element models consisted of the maxilla, maxillary first molars, second premolars, and OMIs. The screw part of the OMI had a diameter of 1.8 mm and length of 8.5 mm and was placed between the roots of the upper second premolar and the first molar. The cortical bone thickness was set to 1 mm. The head part of the OMI was available in 3 sizes: 1 mm, 2 mm, and 3 mm. After a 2 N lateral force was applied to the center of the head part, the stress distribution and magnitude were analyzed using FEA. Results: When the head part of the OMI was friction fitted (tapped into place) into the inserted screw part, the stress was uniformly distributed over the surface where the head part was inserted. The extent of the minimum principal stress suggested that the length of the head part was proportionate with the amount of stress to the cortical bone; the stress varied between 10.84 and 15.33 MPa. Conclusions: These results suggest that the stress level at the cortical bone around the OMI does not have a detrimental influence on physiologic bone remodeling.

• 대한치과교정학회지
• /
• 제25권5호
• /
• pp.543-555
• /
• 1995

골격성 부정교합에 대한 악정형 치료시, 바람직한 악정형 효과를 얻기 위해서는 악정형 장치의 역학 현상에 대한 분석이 필요하다. 상악의 저성장에 기인한 골격성 III급 부정교합의 치료를 위한 상악골의 전방견인시 바람직한 견인력 방향과 견인 위치를 알아보기 위해, 성인 두개골을 대상으로 3차원 유한 요소 모델을 제작하여, 제1소구치와 제1대구치에서 각각 교합평면에 평행 또는 $20^{\circ}$ 하방으로 500g의 전방 견인력을 주어 상악골체의 각 부분에서 응력과 변위를 분석하여 다음과 같은 결과를 얻었다. 1. 모든 경우 상악골이 반시계 방향으로 회전하는 양상을 보였다. 2. 견인력 방향에 따른 상악골의 회전은, $20^{\circ}$ 하방으로 견인하는 경우가 평행하게 견인하는 경우보다 더 적었다. 3. 견인 위치에 따른 상악골의 회전은, 평행하게 견인시에는 견인 위치가 제1대구치일 때가, $20^{\circ}$ 하방으로 견인시에는 제1소구치일 때가 더 적었다. 이상의 결과 견인력 작용선이 상악골체의 저항 중심점에 가장 근접하여 반시계 방향으로의 변위가 가장 적게 일어난 제1소구치에서 $20^{\circ}$ 하방으로 견인한 경우가 바람직한 견인력 방향과 견인 위치로 판단되었다.

• 한국지반공학회논문집
• /
• 제31권12호
• /
• pp.17-27
• /
• 2015

본 연구에서는 식물추출액을 이용하여 요소를 분해한 다음 이로부터 분해된 탄산이온과 수용액 상태의 칼슘이온이 음전하를 띄는 점토를 매개체로 하여 탄산칼슘을 석출시켜 친환경적으로 흙을 고결시키면서 내구성도 향상시키는 연구를 수행하였다. 식물추출액과 요소가 혼합된 제1용액과 칼슘원(염화칼슘)이 용해된 용액에 소량의 점토가 혼합된 제2용액을 깨끗한 낙동강모래에 섞어서 비빈 다음 다짐방법으로 소형 공시체를 제작하였다. 요소와 염화칼슘의 몰농도를 세 종류(1, 5, 7몰)로 달리하였으며, 각 공시체에 점토를 전체중량의 0%, 1%, 3%의 세가지 비율로 혼합하여 공시체를 제작한 다음 실내에서 7일 동안 양생하였다. 양생이 완료된 공시체에 대해 일축압축시험, 내구성시험, SEM, EDX 및 XRD 분석, 그리고 열중량 분석을 실시하여 사질토의 고결 정도와 구조를 분석하였다. 요소와 염화칼슘의 몰농도가 높을수록 점토 함유량이 증가할수록 일축압축강도와 내구성이 증가하는 경향을 보였다. SEM, EDX 및 XRD 분석을 통하여 점토광물 주변에 탄산칼슘(calcite)이 석출되는 것을 확인하였으며, 열중량 분석으로부터 시료 내에 중량대비 탄산칼슘이 1-2% 정도 석출되었다.

• Korean Chemical Engineering Research
• /
• 제43권5호
• /
• pp.560-565
• /
• 2005

1-methylnaphthalene(1-MN)과 2-methylnaphthalene(2-MN) 사이에서의 트랜스메틸화 반응을 제올라이트, H-mordenite(HM), H-Beta$(H{\beta})$, H-USY(HUSY) 촉매를 이용한 고정층 반응기에서 수행하였다. $H{\beta}_{25}(SiO_2/Al_2O_3=25)$ 촉매는 다음과 같은 조건, 반응온도 $350^{\circ}C$, 반응압력 1.5 Mpa, 전체 액상 반응물의 WHSV $2.7g_{feed}/g_{cat}{\cdot}h$, 반응물 1-MN과 2-MN의 몰비 1:1, 반응 1시간에서 2-MN/1-MN 비=2.3와 2,6-DMN/2,7-DMN 비=1.3을 보이면서 다른 촉매보다 높은 전환율과 안정성을 나타내었다. 촉매의 세공구조, 산성도와 관련하여 촉매성능을 해석하였다.

• Journal of Korean Dental Science
• /
• 제9권1호
• /
• pp.1-8
• /
• 2016

Purpose: The aim of this study was to evaluate the rat periodontal ligament cell viability under $0^{\circ}C/2$ MPa condition up to one week using in vivo 3-(4,5-dimethylthiazol-2-y1)-2,5-diphenyltetrazolium bromide (MTT) assay. Materials and Methods: As soon as 110 upper molar teeth of rats were extracted, they were stored in Hartman's solution under $0^{\circ}C/2$ MPa condition for 1, 2, 3, 4, and 7 days each. All specimens were treated with in vivo MTT assay and the value of optical density was measured by ELISA reader. These values were statistically analyzed by one-way ANOVA. Result: There was no statistical difference on MTT value between immediate and 1 day storage group. There were statistically significant differences between 1 day and 2 days tsorage, 2 and 3 days storage groups, respectively. Teeth of 34, and 7 days storage groups showed significantly lower MTT valuesc ompared with shorter period storage groups. Conclusion: When the MTT values were substituted in standard curve, 1 day storage group at $0^{\circ}C/2$ MPa condition showed 68% cell viability when compared with immediate group. It dropped to 13% at 2 days, and to less than 5% at 3 days or more.

• 대한치과교정학회지
• /
• 제46권4호
• /
• pp.242-252
• /
• 2016

Objective: Orthodontic mini-implants (OMI) generate various horizontal and vertical force vectors and moments according to their insertion positions. This study aimed to help select ideal biomechanics during maxillary incisor retraction by varying the length in the anterior retraction hook (ARH) and OMI position. Methods: Two extraction models were constructed to analyze the three-dimentional finite element: a first premolar extraction model (Model 1, M1) and a residual 1-mm space post-extraction model (Model 2, M2). The OMI position was set at a height of 8 mm from the arch wire between the second maxillary premolar and the first molar (low OMI traction) or at a 12-mm height in the mesial second maxillary premolar (high OMI traction). Retraction force vectors of 200 g from the ARH (-1, +1, +3, and +6 mm) at low or high OMI traction were resolved into X-, Y-, and Z-axis components. Results: In M1 (low and high OMI traction) and M2 (low OMI traction), the maxillary incisor tip was extruded, but the apex was intruded, and the occlusal plane was rotated clockwise. Significant intrusion and counter-clockwise rotation in the occlusal plane were observed under high OMI traction and -1 mm ARH in M2. Conclusions: This study observed orthodontic tooth movement according to the OMI position and ARH height, and M2 under high OMI traction with short ARH showed retraction with maxillary incisor intrusion.

• 대한치과보철학회지
• /
• 제37권1호
• /
• pp.104-126
• /
• 1999

The purpose of this study was to compare and evaluate the stress distribution and displacement developed in the abutment teeth and residual ridge area by madibular unilateral distal extension removable partial denture with 2 different retainer designs. The retainers on right and left canine and right 2nd molar were Alters clasp in one model and telescopic crown in the other model. The stress distribution of abutment teeth and residual ridge area on two model were compared and analyzed with 3-dimensional finite element method. 150N and 400N forces were applied vertically, 30 degree and horizontally on the central fossa area of left 1st molar of the removable partial denture, and then stress distribution patterns were analyzed and compared. The results were as follows 1. As the magnitude and angulation of applied force were increased, the magnitude of stress on the right and central residual ridge area and the right canine of the telescopic type increased and comparing to those of the Alters clasp type. 2. As the magnitude and angulation of applied force were increased, the mesial direction of displacement on the right residual ridge area and the right tooth of the telescopic type increased and the distal direction of displacement on left residual ridge area and the left canine increased comparing to those of Akers clasp type. 3. As the vertical force was applied, the distal direction of the displacement of the right tooth were greater and that of the left canine was smaller and the upward displacement of the right canine was greater in telescopic partial denture than those of Akers clasp type. 4. As the 30 degree force was applied, the mesial direction of the displacement of the right tooth were greater and the distal direction of the displacement of the left canine was smaller and the upward displacement of the right canine was greater in telescopic partial denture than those of Akers clasp type. In the horizontal force the results were same in right area tooth but the distal direction of displacement was greater in left canine. 5. In both removable partial dentures, as the magnitude and degree of force were increased, the stress and displacement were increased. The compressive force was dominative than the ten sile force. 6. In both removable partial dentures, the magnitude of stress was greater on mucosal tissue area than that of the alveolar bone area on distal extension residual ridge area but the result was reversed on anterior residual ridge area. The displacement was always greater on mucosal tissue area than that of alveolar bone area.