• E2M - 전기 전자와 첨단 소재
• /
• 제5권2호
• /
• pp.189-197
• /
• 1992

고온 초전도체 $Y_{1}$Ba$_{2}$Cu$_{3}$O$_{7-y}$에서 Y를 Sm으로 치환시켰을 때의 자기 임계 전류밀도와 저항은 각각 30K와 80-160K의 온도에서 측정되었다. 그리고 X-선 회절분석 및 적외선 투과율 측정은 실온에서 수행되었으며 시료들은 고상 반응법에 의해서 제조되었다. 93K근에의 값을 갖는 초전도 전이온도 T$_{c}$는 치환양에 따라 거의 변하지 않았다. 시료들의 결정구조는 X-선 회절무늬로 부터 모두 직방정계임이 판명되었다. 적외선 투과율 측정에서 날카로운 peak들은 472.78-618.53$cm^{-1}$ /범위에 있었다. 이것은 특이할 정도로의 low-lying plasmalike edge와 낮은 에너지의 전자적인 여기가 존재함을 나타내는 것이다. 자기 임계 전류밀도는 $10^{3}$~$10^{4}$A/$cm^{2}$범위에 있었다. 전이온도 T$_{c}$에 상자성 불순물의 영향이 거의 없는 것으로 보아 123phase에서 Y가 고온 초전도성에 주된 역할을 하지 않음을 알수 있었다.다.

• Progress in Superconductivity
• /
• 제13권1호
• /
• pp.7-11
• /
• 2011

조성경사법을 이용하여 LMO/IBAD-MgO template 상에 EDDC 증착법을 이용하여 $Sm_{1+x}Ba_{2-x}Cu_{3+y}O_{7-d}$ 초전도 박막을 증착하였다. 테이프 형상의 기판상에 길이방향으로 $Sm_{1+x}Ba_{2-x}Cu_{3+y}O_{7-d}$ 박막의 조성비가 연속적으로 변하는 샘플을 얻을 수 있었고, 비접촉 Hallprobe를 이용하여 임계전류를 측정한 결과 조성비에 대응하는 연속적인 임계전류분포를 측정할 수 있었다. 본 조성비 영역 중 Sm:Ba:Cu = 1.01:1.99 :4.87의 조성비에서 최대의 임계전류를 보였다. 이 조성비에서 SmBCO 박막표면에 전체적으로 roof tile 형상의 결정립들이 관찰되었으며 국소적으로 2차상들이 관찰되었다. 조성 경사법을 이용하면 광범위한 조성비영역에서 신뢰도 높은 초전도특성, 결정배향성, 박막표면 형상 등을 조사할 수 있을 것으로 예상된다.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.275-280
• /
• 2002

The peculiarities of using Self-propagating High-temperature Synthesis (SHS) and solid-stave chase synthesis for production of high temperature superconductor materials were discussed. Oxide superconductors with general formula of $ReBa_2Cu_3O_{7-x}$ (Re=Y, Sm) haute been made by using barium oxide initial powder instead of traditional barium carbonate. Phenomena observed during the grinding of the reactants mixture are presented. Mechano-chemical activation - as a pre-treatment of the reactants mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.92-98
• /
• 2009

The magnetic field profiles near the surface of a $Sm_1Ba_2Cu_3O_{7-\delta}$ coated conductor(CC-tape) under magnetic field and current that were applied simultaneously with phase differences ${\phi}s$ were measured using scanning Hall probe method. Measurements were carried out along the elliptic load lines with $\phi=90^{\circ}\;and\;45^{\circ}$ for some $B_{peak},\;I_{peak}$ values. From the measured field profiles, sheet current density J(x, $B_a,\;I_a$) and magnetic flux density $B_0(x,\;B_a,\;I_a)$ profiles in the CC-tape were calculated. Using these J(x, $B_a,\;I_a$) and $B_0(x,\;B_a,\;I_a)$ profiles, we estimated the hysteresis energy loss Q in the CC-tape. The estimated Qs, together with our previous results for $\phi=0^{\circ}$ from [9], were compared with theoretical values based on Brandt's calculation.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.63-63
• /
• 2007

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.79-79
• /
• 2004

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.64-64
• /
• 2007

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.620-623
• /
• 2001

The peculiarities of using Self-propagating High-temperature Synthesis (SHS) and solid state phase synthesis for production of high temperature superconductor materials are discussed. Oxide superconductors with general formula $ReBa_2$$Cu_3$$O_{7-x}$ (Re= Y, Yb, Sm, Nd) have been made with using barium oxide initial powder instead of traditional barium carbonate. X-ray powder diffraction showed a single phase orthorhombic perovskite structure was produced in all reactions. Phenomena observed during the grinding of the reactant mixture are presented. Mechano-chemical activation - as a pretreatment of the reactant mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.5-8
• /
• 2007

We have investigated the superconducting properties and surface morphology of $Sm_xBa_yCu_3O_{6+z}$ thin films deposited on LMO/IBAD-MgO/Hastelloy which prepared with different composition ratio by co-evaporation method(EDDC, Evaporation using Drum in Dual Chambers). We observed the composition ratio of SmBCO thin films by EDS analysis. We fabricated SmBCO thin film with critical current density of $1.5{\times}10^6A/cm^2$ at composition ratio of SM:Ba:Cu=1.10:2.01:3(at 77 K self-field). And, we confirmed that substitution of Sm-Ba did not occur at Cu rich phase by EDS analysis.

• 한국전기전자재료학회논문지
• /
• 제16권3호
• /
• pp.231-237
• /
• 2003

RE(Nd, Sm) elements doped (RE/Y)$_{1.8}$B $a_{2.4}$C $u_{3.4}$$O_{7-x}$ [(RE/Y)1.8] high $T_{c}$ superconductors were directionally grown by Top Seed Melt Growth(TSMG) process in air atmosphere. The (001)melt-textured N $d_{1.8}$B $a_{2.4}$C $u_{3.4}$ $O_{7-X}$(Nd1.8) seed crystals were used for achieving the c-axis alignment large grains perpendicular to surface of the samples. The (RE/Y)1.8 SEM micrographs of the melt-textured (RE/Y)1.8 samples revealed that the nonsuperconducting (RE/Y)211 inclusions are uniformly distributed in the superconducting (RE/Y)123 matrix except the region very close to the Nd seed crystal. The microstructure and superconducting properties were investigated by XRD, SEM, TEM and SQUID magnetometer. The Melt-textured (RE/Y)1.8 samples showed an onset $T_{c}$=91K and sharp superconducting transition. Also, the magnetization value of the (RE/Y)1.8 samples were compared with those of Y1.8 sample at 77 K. 77 K. 77 K. 77 K.K.