• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 1998년도 추계학술발표대회 초록개요집
• /
• pp.16-19
• /
• 1998

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 1999년도 추계학술발표대회 논문개요집
• /
• pp.33-35
• /
• 1999

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 1999년도 추계학술발표대회 논문개요집
• /
• pp.53-55
• /
• 1999

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2000년도 춘계학술발표대회 논문개요집
• /
• pp.20-23
• /
• 2000

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 1998년도 춘계학술발표대회 초록개요집
• /
• pp.18-19
• /
• 1998

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2000년도 춘계학술발표대회 논문개요집
• /
• pp.51-54
• /
• 2000

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권8호
• /
• pp.587-590
• /
• 1999

In this study, it is the purpose to develope a cheap and compact $CO_2$ laser and to apply 60 Hz AC discharges as a new exciting source. An axial and water cooledtype was adopted as the laser mode. The laser performance characteristics as various parameters, such as gas pressure and discharge current, have been investigated. And the laser output and the efficiency of DC and 60 Hz AC discharge-exciting type have been measured and compared for the different input powers at the static operational pressure. As a result, the case of 60 Hz AC discharge-exciting type, the laser oscillation began at the condition of operational pressure 6 Torr and discharge current 5 mA. A maximum laser output of about 32 W was obtained at an operational pressure of 18 Toorr and a discharge current of 30 mA. In addition, the laser output was saturated from an operational pressure of about 14 Torr and a discharge current of about 20 mA. In this $CO_2$ laser, the laser output of 60 Hz AC discharge-exciting type was slightly higher than that of DC discharge-exciting type. And the laser efficiency was about 10 to 13% for the various operational pressures and the discharge currents.

• Medical Lasers
• /
• 제8권1호
• /
• pp.1-6
• /
• 2019

Background and Objectives A facial laceration is a commonly occurring trauma of children. In addition, appropriate treatment and scar management are very important because the psychosocial impact of facial scars is much greater in children than in adults. Materials and Methods In the authors' hospital, primary closure was conducted targeting a total of 8,924 patients from January 2015 to December 2017. Of these, scar management was conducted on 808 people using a CO₂ fractional laser and Q-Switch Nd:YAG laser. To prove the effectiveness of the laser treatment on the linear scar, the patients were divided retrospectively into children and adults and sub-divided into those who received the treatment and those who did not. The subjective satisfaction of patients was evaluated using the Numeric Rating System (NRS). The objective scar scoring was evaluated using the image panel assessment based on the Vancouver Scar Scale (VSS), and the scoring was made by averaging the evaluations of three plastic surgeons. Results Evaluated NRS showed 8.50 ± 1.83 for adults without a laser, 8.51 ± 1.47 for adults with a laser, 7.93 ± 2.10 for children without a laser, and 8.9 ± 1.24 for children with a laser. The image panel assessment revealed 7.06 ± 1.31 for adults without a laser, 6.40 ± 2.37 for adults with a laser, 6.86 ± 1.45 for children without a laser, and 5.93 ± 1.21 for children with a laser. Conclusion When the linear scar is managed using a CO₂ Fractional laser, it can be managed in children better than adults, which is believed to be useful because it leads to better satisfaction and prognosis.

• 한국광학회지
• /
• 제7권2호
• /
• pp.157-161
• /
• 1996

산란광의 되먹임을 이용한 간단한 구조의 레이저 도플러 속도계를 제작하였다. 단일파장의 레이저 광을 움직이는 물체에 조사할 때 발생하는 산란광의 일부를 레이저 공진기에 되먹임하여 도플러 주파수로 변조된 레이저 출력을 측정하였다. 도플러 주파수는 원판의 회전속도에 비례하였고 속도벡터와 레이저빔 광축 사이의 각도의 코사인에 선형적으로 변화하였다. 본 방법으로 0-17m/s의 회전속도를 최고 2.9%의 오차로 측정하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1831-1833
• /
• 2003

Nowadays, CO2 lasers are used widely in many applications such as materials fabrication, communications, remote sensing and military purpose etc. Especially, CO2 lasers are in the spotlight at surface handling and heat processing. It is important to control the laser output power and beam quality in those fields. To increase beam qualify, We used the feedback system by various sensors. Although, CO2 lasers' output beam became feedback, its beam affected the irradiated material target already. Since, ideal real time control have still the problem to solve. Hence, we need the new proposal for more precise laser processing. So we expect the new effect how to change the irradiated material target as the kind of, processing time and output density caused by the CO2 laser beam. In this study, We have investigated the characteristics of the temperature and HAZ(Heat Affected Zone) by CO2 laser output with IR temperature sensor and RTD.