• 한국환경과학회지
• /
• 제16권1호
• /
• pp.1-8
• /
• 2007

Atmospheric photochemistry of $O_3-NOx-RH$ were considered theoretically, to clarify the reasons for the different trends of between the formation of photochemical oxidants (Ox) and its primary pollutants for the Low-and High-NOx regimes. Equations of OH, $HO_2$, and production of ozone ($O_3$) as a function of nitrogen oxides (NOx) and reactive hydrocarbons (RH) were represented in this study. For the Low-NOx regime, $HO_2$ radical is proportional to RH but independent of NOx. OH radical is proportional to NOx but inversely-proportional to RH. $O_3$ production is proportional to NOx but has a weak dependence on RH. For the High-NOx regime, OH and $HO_2$ radicals concentrations and $O_3$ production are proportional to RH but inversely-proportional to NOx. In addition, the Osaka Bay and surrounding areas of Japan were evaluated with the mass balance of odd-hydrogen radicals (Odd-H) using CBM-IV photochemical mechanism, in order to distinguish the Low- and High-NOx regimes. The Harima area (emission ratio, RH/NOx = 6.1) was classified to the Low-NOx regime. The Hanshin area (RH/NOx = 3.5) and Osaka area (RH/NOx = 4.3) were classified to the High-NOx regime.

• 한국수소및신에너지학회논문집
• /
• 제3권2호
• /
• pp.25-33
• /
• 1992

With the aim to obtain $TiO_2$ films with an increased photorespones and absorbance in the visible region of the solar spectrum, the direct oxidation of titanium alloys were performed. In this study, $Ti-Ga_2O_3$ alloy was prepared by mixing, pressing and arc melting of appropriate amounts of titanium and $Ga_2O_3$ powder. Electrochemical measurements were performed in three electrode cell using electrolyte of 1M NaOH solution. The oxide films on $Ti-Ga_2O_3$ alloy was composed of $Ti_2O$, TiO, $TiO_2$, $Ga_2TiO_5$. The free energy efficiency (${\eta}e$) of $Ti-Ga_2O_3$ oxide films had 0.8~1.3 % and were increased with the increase of $Ga_2O_3$ content up to 10wt %. The onset potential ($V_{on}$) had -0.8V~0.9V ranges and were shifted to anodic direction with the increase of $Ga_2O_3$ content. The spectral response of Ti-$Ga_2O_3$ oxides were similar to the response of the $TiO_2$ and their $E_g$ were observed to 2.90~3.0eV. Variations of onset potential($V_{on}$) associated with electrolyte pH were -59mV/pH. This probably reflects the nature of the bonding of $OH^-$ ion to the $TiO_2$ surface, a common phenomena in the transition-metal oxides.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.25-28
• /
• 1998

Lithiated cobalt and nickel oxides are becoming very attractive as active cathode materials for secondary lithium ion secondary battery. $LiCoO_2$ is easily synthesized from lithium cobalt salts, but has a relatively high oxidizing potential on charge. LiNiOz is synthesized by a more complex procedure and its nonstoichiometry significantly degraded the charge-discharge characteristics. But $LiNiO_2$ has a lower charge potential which increases the system stability. Lithiated cobalt and nickel oxides are iso-structure which make the preparation of solid solutions of $LiNi_{1-x}Co_xO_2$ for O$LiCoO_2 and LiNiO_2$ electrode. The aim of the presentb paper is to study the electrochemical behaviour, as weU as the possibilities for practical application of layered Iithiated nickel oxide stabilized by $Co^{3+}$ substitution as active cathode materials in lithium ion secondary battery.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2711-2717
• /
• 2024

The current work aims to fabricate metal oxide-doped (PbO, Fe₂O₃, MgO, and Al₂O₃, each of which boasts a purity of 99%) zinc barium borate glasses through the melt quenching technique at the 1000 ℃ melting temperature. The results showed that adding 5 mol.% of metal oxides PbO, Fe₂O₃, Al₂O₃, and MgO increases the density of the zinc barium borate glasses. Additionally, the fabricated glasses' mechanical properties were determined based on the Makishima-Mackenzie model, which proved that the highest mechanical properties were achieved for glasses doped with Al₂O₃ compounds. The mechanical moduli for the glasses doped with Al₂O₃ reach 80.95 GPa (Young), 59.90 GPa (bulk), 31.75 GPa (shear), and 102.23 GPa (longitudinal). Additionally, the Al₂O₃-doped glasses' microhardness reaches 4.77 GPa. Moreover, estimation of the fabricated glasses' gamma-ray shielding capacity utilized Monte Carlo simulation. The highest linear attenuation coefficients are 29.132, 19.906, 19.243, and 18.923 cm^-1 obtained at 0.033 MeV for glasses dopped by PbO, Fe₂O₃, MgO, and Al₂O₃, respectively. Therefore, glasses doped with 5 mol.% of PbO have high gamma-ray shielding capacities followed by glasses doped by Fe₂O₃.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.149-154
• /
• 2017

Transparent conducting oxides (TCOs) were fabricated using solution-based ITO (Sn-doped $In_2O_3$) nanoinks with nanorods at an annealing temperature of $200^{\circ}C$. In order to optimize their transparent conducting performance, ITO nanoinks were composed of ITO nanoparticles alone and the weight ratios of the nanorods to nanoparticles in the ITO nanoinks were adjusted to 0.1, 0.2, and 0.5. As a result, compared to the other TCOs, the ITO TCOs formed by the ITO nanoinks with weight ratio of 0.1 were found to exhibit outstanding transparent conducting performance in terms of sheet resistance (${\sim}102.3{\Omega}/square$) and optical transmittance (~80.2 %) at 550 nm; these excellent properties are due to the enhanced Hall mobility induced by the interconnection of the composite nanorods with the (440) planes of the short lattice distance in the TCOs, in which the presence of the nanorods can serve as a conducting pathway for electrons. Therefore, this resulting material can be proposed as a potential candidate for solution-based TCOs for use in optoelectronic devices requiring large-scale and low-cost processes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.565-568
• /
• 1987

In order to determine the standard composition of ZnO varistor with higher nonlinearity, various contents of $MnO_2$, $Co_2O_3$ were added to ZnO-1.0m/o $Bi_2O_3$ system. Also, samples that contained small amount of Sb, Si-oxides in standard composition determined before were fabricated. As a result, the standard composition of higher nonlinearity-oriented ZnO varistor was shown as ZnO-1.0 m/o $Bi_2O_3$-1.0m/o $MnO_2$-1.0m/o $Co_2O_3$ and $Sb_2O_3$ largely enhanced nonlinear exponent and nonlinear resistance, hut SiO largely enhanced nonlinear exponent only.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.11-17
• /
• 2003

Ni-Mn 산화물 NTC 서미스터의 미세구조와 전기적 특성에 미치는 Zr $O_2$ 첨가의 효과를 연구하였다. Zr $O_2$를 포함하는 Ni-Mn-Zr 산화물 소결체의 주요 상은 입방정 스피넬 구조를 가지는 NiO-Mn$_3$ $O_4$-Zr $O_2$의 고용체와 정방정 결정구조를 가지는 Zr $O_2$ 상이였다. Zr $O_2$의 첨가량이 증가함에 따라 Ni-Mn-Zr산화물의 고용체를 형성하지 못하고 생성된 Zr $O_2$의 양이 증가하였다. NiO-Mn$_3$ $O_4$-Zr $O_2$ NTC 서미스터에 있어서 절대온도 역수(l/T)에 대한 로그 비저항(log $ho$)은 직선적인 관계가 있었고, 비저항, B$_{140}$320/정수 및 활성화 에너지는 Zr $O_2$ 함량이 증가함에 따라 크게 증가하였다.

• 대한환경공학회지
• /
• 제31권4호
• /
• pp.278-286
• /
• 2009

본 연구에서는 망간원석을 포함한 4종의 천연망간산화물($NMO_1\;NMO_4$)을 대상으로 물질특성(결정상, 표면형태)과 1-naphthol (1-NP)에 대한 제거반응 특성을 회분식 실험을 통하여 수행하였고, 그 결과를 버네사이트에서의 결과와 비교 분석하였다. 천연망간산화물은 출처에 따라 버네사이트(${\delta}-MnO_2$)외에도 크립토멜란(${\alpha}-MnO_2$), 연망간석(${\beta}-MnO_2$) 등의 다양한 표면 특성을 동시에 가지고 있었으며, 이러한 표면 특성으로 인해 제거효율(제거율, 반응속도) 및 제거반응(흡착 또는 산화-변환제거)에서 차이를 보였다. 특히, $NMO_1$(전해망간산화물)은 버네사이트에 비교해서도 우수한 1-NP의 산화-변환 제거효율을 보임을 알 수 있었다. 망간산화물에 의한 1-NP의 제거는 모두 유사-일차속도 식을 따랐으며, 각 망간산화물의 비표면적으로 표준화하여 얻은 속도상수($k_{surf},\;L/m^2$ min) 값은 $NMO_1(3.31{\times}10^{-3})$>${\delta}-MnO_2(1.48{\times}10^{-3}){\fallingdotseq}NMO_3(1.46{\times}10^{-3})$>$NMO_2(0.83{\times}10^{-3})$>$NMO_4(0.67{\times}10^{-3})$의 순이었다. 또한, 반응후 침전층에 대한 용매추출실험을 통해 평가한 1-NP의 산화-변환 반응효율은 $NMO_1{\fallingdotseq}{\delta}-MnO_2$>$NMO_3$>$NMO_4{\gg}NMO_2$의 순이었으며, 반응산물은 반응여액(상등액)에 대한 HPLC 크로마토그램, UV-vis. 흡광도비($A_{2/4}$, $A_{2/6}$) 분석을 통해 버네사이트에서와 같이 1-napthol의 산화-결합 반응에 의한 것임을 확인하였다. 이상의 결과로부터 본 실험에 사용한 천연망간산화물($NMO_2$ 제외)은 1-NP의 제거에 효과적으로 적용될 수 있으며, 반응효율은 망간산화물의 출처에 따른 표면특성에 따라 차이가 있음을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.972-976
• /
• 1997

Single phase ruthenium oxides with perovskite (ATi1-xRuxO3 (A=Ca, Sr)) and pyrochlore structure (Bi2Ru2O7, Pb2Ru2O6.5) have been prepared reproducibly by solid state reaction methods and their electrocatalytic activities for oxygen evolution have been examined by Tafel plots. Tafel slopes vary from a low value of 42 mV/decade up to 222 mV/decade at room temperature. The high exchange current densities and high Tafel slopes compared with those obtained from the RuO2 DSA electrode at the crystalline single phase metal oxide electrodes suggest that they are better electrocatalysts at low overpotentials. A favorable change in the Tafel slope for the oxygen evolution reaction occurs as the ruthenium content increases. Substitution of Ti for Ru in the perovskite solid solutions enhanced their chemical stability by losing marginal electrochemical activity.

• 자원리싸이클링
• /
• 제7권4호
• /
• pp.43-49
• /
• 1998

다양한 hard ferrite용 국산 산화철(${\alpha}Fe_2O_3$)의 분체특성이 Sr-ferrite의 자기특성에 미치는 영향을 조사하였다. 산화철의 평균입도와 입도분호는 철강 냉연공장의 염산폐액 정제방법에 따라 서로 구분되었으며, Sr-ferrite의 자기특성과 미세조직에 큰 영향을 주었다. Ruthner 산화철의 응집현상은 Sr-ferrite의 포화자화를 감소시켰으며, Chemirite(CY) 산화철의 $0.80{\mu}\textrm{m}$이상의 조대한 입자는 Sr-ferrite의 고유보자력을 감소시켰다. 평균입도가 $0.14\mu\textrm{m}$로 가장 작은 Chemirite 포항2냉연(EP) 산화철을 사용하여, 5.8mol, $1150^{\circ}C$/1시간의 하소조건에서 제조된 Sr-ferrite는 포화자화가 68.2emu/g, 고유보자력이 4300Oe인 최적의 자기특성을 나타내었다.