• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.110-116
• /
• 2002

At elevated temperature, very complex precipitations occur in STS316. To investigate the effect of the precipitation on mechanical properties in SIS316, tensile tests and fatigue crack growth tests were carried out at $650^{\circ}C$ using artificially degraded materials. The material degradation was simulated by aging for up to 20000 hrs. at $750^{\circ}C$, which is equal to 179000hrs (about 20yrs) of service life at $650^{\circ}C$, after conducting solution treatment for 20 min. at $11300^{\circ}C$. The result of the hardness test and the tensile test showed that both properties are closely related to the mean free distance of carbides. Also, from the results of fracture tests at $650^{\circ}C$, ${\triangle}K_{th}$, after values were found to decrease as aging time and microstructure, as the volume fraction of $\sigma$ phase increased.

• Applied Microscopy
• /
• 제46권1호
• /
• pp.45-50
• /
• 2016

Iron containing a high amount of chromium is known to be inferior to ductility due to ${\sigma}$ phase formation so that it is generally difficult to apply the plastic deformation process although the alloy possesses a superior characteristics of an excellent corrosion resistance. In this study, Fe-50mass%Cr alloy was melted using high purity powder and the deformation behavior has been investigated by cold rolling and tensile test. The tensile test yielded that the alloy revealed a serration at an early stage of tensile deformation and then the serrated flow vanished to change to a normal work hardening flow at the later stage. The former was governed by twin formation process, the latter by dislocation multiplication one, bringing about a high ductility of 20% or over. The reduction ratio in cold rolling was attained as high as 90%, thus the high corrosion-resistant alloy is able to possess a high ductility.

• Corrosion Science and Technology
• /
• 제2권2호
• /
• pp.75-81
• /
• 2003

Chromium, molybdenum. and nitrogen are very important alloying elements in stainless steels and its effect was approved in pitting resistance equivalent (PRE) equations and many experimental results. However, Cr can improve the corrosion resistance, but facilitate the formation of sigma phase. Also. Mo has the same effect in stainless steels. If Cr and Mo are added at high amount to increase the corrosion resistance of stainless steel, corrosion resistance in annealed alloys can be improved, but in case of welding or aging heat treatment. its resistance will be drastically decreased. In this work, increasing Cr and N contents but decreasing Mo than the commercial alloys made the experimental alloys. Typical alloys are 25Cr-4.5Mo-0.43N alloy, 27Cr-4.7Mo-0.4N alloy, 27Cr-5.3Mo-0.25N alloy, 32Cr-2.6Mo-0.36N alloy. After annealing and aging heat treatment, microstructures, anodic polarization test, and pitting corrosion test were performed. Annealed alloys showed $100^{\circ}C$ of CPT and aged alloys showed the different tendency depending upon Cr and Mo contents(SFI)

• ETRI Journal
• /
• 제33권4호
• /
• pp.487-496
• /
• 2011

Korea Multi-Purpose Satellite-5 (KOMPSAT-5) is the first satellite in Korea that provides 1 m resolution synthetic aperture radar (SAR) images. Precise orbit determination (POD) using a dual-frequency IGOR receiver data is performed to conduct high-resolution SAR images. We suggest orbit determination strategies based on a differential GPS technique. Double-differenced phase observations are sampled every 30 seconds. A dynamic model approach using an estimation of general empirical acceleration every 6 minutes through a batch least-squares estimator is applied. The orbit accuracy is validated using real data from GRACE and KOMPSAT-2 as well as simulated KOMPSAT-5 data. The POD results using GRACE satellite are adjusted through satellite laser ranging data and compared with publicly available reference orbit data. Operational orbit determination satisfies 5 m root sum square (RSS) in one sigma, and POD meets the orbit accuracy requirements of less than 20 cm and 0.003 cm/s RSS in position and velocity, respectively.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권3호
• /
• pp.131-137
• /
• 2000

2 phase 8 pole HB-type(flat-type) Linear Pulse Motor can be used as the high precision position actuator because of its many advantages (simple control circuit, high stiffness characteristics, etc). Also, using the microstep drive, its noise and vibration can be reduced considerably and positional resolution may be increased further. But, $20^{\circ}$tapered tooth shape to reduce the normal force have an much effect on the static thrust force characteristics. And, because of hybrid-type LPM, interaction between the permanent magnet and the excitation current have an effect on the various characteristics of LPM. Hence, in this paper, the effect of tooth shape on static thrust force characteristics was analyzed using the air gap permeance by finite element method. For analyzing the effect of unbalance between the m.m.f of permanent magnet and the m.m.f of excitation current, unbalanced m.m.f coefficient $\sigma$ were introduced with the permenace matrix and switching matrix.

• Journal of Microbiology and Biotechnology
• /
• 제16권4호
• /
• pp.543-549
• /
• 2006

DNA microarray was used to study the transcription profiling of Escherichia coli adapting to acetate as a sole carbon source. Bacteria grown in glucose minimal media were used as a reference. The dynamic expression levels of 3,497 genes were monitored at seven time points during this adaptation. Among the central metabolic genes, the glycolytic and glucose phosphotransferase genes were repressed as the bacteria entered stationary phase, whereas the glyoxylate pathway, TCA cycle, and gluconeogenic genes were induced. Distinct induction or repression patterns were recognized among different pathway genes. For example, the repression of glycolytic genes and the induction of gluconeogenic ones started immediately after glucose was depleted. On the other hand, the regulation of the pentose phosphate pathway genes and glyoxylate genes gradually responded to the glucose depletion or was more related to growth in acetate. When the whole genome was considered, many of the CRP, FadR, and Cra regulons were immediately responsive to the glucose depletion, whereas the $\sigma^s$, Lrp, and IHF regulons were gradually responsive to the glucose depletion. The expression profiling also provided differential regulations between isoenzymes; for example, malic enzymes A (sfcA) and B (maeB). The expression profiles of three genes were confirmed with RT-PCR.

• 한국소음진동공학회논문집
• /
• 제21권7호
• /
• pp.674-681
• /
• 2011

In the early phase of vehicle development, CAE is conducted as tool for vehicle performance assessment. To maintain acceptable road noise performance, solution for reduced vehicle sensitivity is required. Chassis interface dynamic stiffness characteristics are key component to isolating vibration and noise of road from the vehicle interior. This research provide how to set up the optimized dynamic characteristics under noise effect through DFSS study. CAE-based DOE is performed to build prediction math model, CMS process involves DOE to achieve very fast run times while giving results very comparable. Minimized 95th percentile of performance distribution is applied to minimize vehicle sensitivity and road noise levels variation during the optimization process. Finally, the results of optimization were reviewed for performance and robustness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.934-937
• /
• 2003

Glasses in the system $CuO-P_2O_5-V_2O_5$ were prepared by a press-quenching method on the copper plate. The glass-ceramics from these glasses were obtained by post-heat treatment, and the crystallization behavior and DC conductivities were determined. The conductivities of the glasses were range from $10^{-6}s.Cm^{-1}$ at room temperature, but the conductivities of the glass-ceramics were $10^{-3}s.Cm^{-1}$ increased by $10^3$ order. The crystalline product in the glass-ceramics was $CuV_2O_6$. Heat-treatment conditions influenced the crystal growth of $CuV_2O_6$ and conductivity. The linear relationship between in (${\sigma}T$) and $T^{-1}$ suggested that the electrical conduction in the present glass-ceramics would be due to a small polaron hopping(SPH) mechanism.

• 암석학회지
• /
• 제27권3호
• /
• pp.139-151
• /
• 2018

경상분지 영양소분지 남서 경계부의 영남육괴 소백산지구에 위치하는 청송군 송강리지역은 시대미상의 변성암류(호상편마암, 화강암질편마암, 석회규산염암류)와 이를 관입하는 시대미상의 화성암류(화강편마암)로 구성되어 있다. 본 논문은 송강리 송강마을의 동측에 흐르는 용전천 하안을 따라 약 170 m 노출된 지질노두에서 중첩 변형된 암석구조의 기하학적 운동학적 특성과 이들 변형구조의 선후관계로부터 송강리지역 구성암류의 변형사를 연구하였다. 송강리 지질노두에서 변형 및 관입 시기를 서로 달리하는 3회(Fn, Fn+1, Fn+2)의 습곡작용과 3회(Dk-I, Dk-II, Dk-III)의 산성암맥들의 관입작용 그리고 1회의 단층운동이 인지되고, 이들은 적어도 다섯 번의 변형단계(Dn, Dn+1, Dn+2, Dn+3, Dn+4)를 걸쳐 형성되었다. Dn 변형은 광역엽리를 형성시키는 Fn 습곡작용으로 인지된다. Dn+1 변형은 (동)북동-(서)남서 방향의 압축응력에 의해 전기단계에 (동)북동 방향의 Dk-I 암맥을 관입시켰으며, 후기단계에 북서 방향의 Fn+1 습곡을 형성시켰다. 주요 변형된 암석구조로는 밀착, 등사, 층간습곡, 부딘구조, 부딘의 ${\sigma}$-형 내지 ${\delta}$-형 구조, 비대칭습곡, C' 전단띠 등이 있다. Dn+2 변형은 (북)북서-(남)남동 방향의 압축응력에 의해 전기단계에 북서 방향의 Dk-II 암맥을 관입시켰으며, 후기단계에 북동 방향의 Fn+2 습곡을 형성시켰다. 주요 변형된 암석구조로는 개방습곡과 습곡된 부딘구조 등이 있다. Dn+3 변형은 Dk-I과 Dk-II의 암맥들과 Fn+2 습곡축면을 절단하는 Dk-III의 암맥을 관입시켰다. Dn+4 변형은 상반이 남남동 방향으로 이동하는 북북동 방향의 좌수향 역이동성 사교이동 단층을 형성시켰다. 송강리 지질노두에서 인지되는 이러한 다섯 번의 변형작용은 송강리지역 뿐만 아니라 보다 광역지역 구성암류의 분포 및 지질구조와 밀접한 관련이 있음을 고려해 볼 때, 본 연구결과는 영남육괴의 소백산지구와 경상분지의 경계부와 그 주변부의 구성암류가 경험한 지질구조 및 그 발달사를 규명하고 이해하는데 매우 중요한 연구자료로 활용될 것으로 기대된다.

• Journal of Astronomy and Space Sciences
• /
• 제22권1호
• /
• pp.13-20
• /
• 2005

지상 및 우주 천체 망원경용 비구면 반사경면 초기 제작공정에는 고정입자 휠을 사용하는 연삭이 있다. 본 연구에서는 매 연삭 가공 이전에 설정한 목표 표면조도를 달성할 수 있도록 입력 연삭변수들을 결정하고, 표면 가공오차를 추적하며 , 가공 경과시간을 최소화하는 새로운 연삭공정을 개발하였다. 특별히 이 공정 기법은 이전 연삭 가공 작업시 까지 수집된 입력 변수 및 가공 결과 표면조도 자료를 다 변수 회귀분석 방법에 대입하여 목표 표면조도에 따른 최적 연삭가공 입력변수를 매 가공 작업 시 진화적으로 제시하는 지능형 공정 조절 능력을 갖추고 있다. 개발된 공정기법과 초정밀 컴퓨터 수치제어 연삭기를 사용하여 $96.1\~65.0nm(Ra)$ 범위 의 목표 표면조도를 갖는 제로듀어 소재에 대하여 10회 가공 실험을 수행 한 결과 $=-0.906{\pm}3.38(\sigma)nm(Ra)$의 가공 정밀도를 달성하여, 지능형 연삭공정의 효율을 입증하였다. 이러한 연구결과는 천체망원경용 반사경면 연삭 가공 시 정성적 경험에 의존하여 가공하는 기존 기술을 극복하고 정량적 수치 모형에 의하여 가공소요시간 최소화 및 나노미터 급 표면조도를 달성하는 진화형 공정 최적화 기술의 확립이라는 의의를 가지고 있다.