• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.54-66
• /
• 2002

In order to study systematic survey of Kumho river pollution, water analysis for 24 items was conducted at 16 sites surrounding the Kumho river system for 3 times from May 2000 to February 2001. Analytical items for the study of water quality are as follows; water temperature, pH, BOD, COD, DO, SS, electrical conductivity, oil & grease, ABS, phenol, T-P, ${PO_4}^{3-}-P$, T-N, $NH_3-N$, ${NO_2}^--N$, ${NO_3}^--N$, Cu, Zn, Cr, Cd, Mn, Fe, Pb and As. The mean values obtained for water temperature, pH, BOD, COD, DO, SS, electrical conductivity, oil & grease, ABS, phenol T-P, T-N, Cu, Zn, Fe and Mn showed $17.84^{\circ}C$, 8.04, $2.54{\mu}g/mL$, $5.64{\mu}g/mL$, $7.07{\mu}g/mL$, $8.75{\mu}g/mL$, $600.4{\mu}S/cm$, $0.19{\mu}g/mL$, $0.015{\mu}g/mL$, $0.29{\mu}g/mL$, $0.21{\mu}g/mL$, $5.22{\mu}g/mL$, $0.005{\mu}g/mL$, $0.007{\mu}g/mL$, $0.044{\mu}g/mL$ and $0.001{\mu}g/mL$ respectively. As, Cd, Cr and Pb are not detected. The mean concentration of phenol, $NH_3-N$ and $NO_2-N$ were found to be increased compared to the prior study for 3 years from January 1997 to December 1999, that of BOD, COD, SS, oil & grease and ABS were found to be decreased and the others are nearly constant. The effect of Kumho river to the Nakdong river pollution are as follows. The mean concentration of BOD changed from $1.07{\mu}g/mL$ to $1.42{\mu}g/mL$ before and after of introducing of Kumho river water respectively. The mean concentration of COD, electrical conductivity, oil & grease, ABS, phenol, T-N and T-P changed from $1.99{\mu}g/mL$, $221{\mu}S/cm$, $0.15{\mu}g/mL$, $0.006{\mu}g/mL$, $0.06{\mu}g/mL$, $2.21{\mu}g/mL$ and $0.08{\mu}g/mL$ to $2.44{\mu}g/mL$, $392{\mu}S/cm$, $0.16{\mu}g/mL$, $0.015{\mu}g/mL$, $0.07{\mu}g/mL$, $2.81{\mu}g/mL$ and $0.19{\mu}g/mL$ respectively.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.11
• /
• pp.894-901
• /
• 1991

Contact-type linear image sensors have been fabricated by means of RF glow discharge decomposition method of silane and hydrogen mixtures. The dependences of the electrical and optical properties of these sensor on thickness, RF power, substrate temperature and ambient gas pressure have been investigated. the ITO/i-a-Si:H/Al structure film shows photosensitivity of 0.85 and photocurrent to dark current ratio ($I_{ph}/I_{d}$) of 150 at 5V bias voltage under 200${\mu}W/cm^[2}$ red light intensity. Under 200${\mu}W/cm^[2}$ green light intensity, the ratio is 100. In order to investigate photocarrier transport mechanism and to obtain ${\mu}{\gamma}$ product we have measured the I-V characteristics of these sensors favricated with several different deposition parameters under various light sources. The linear inage sensor for document reading has been operated under reverse bias condition with green light source, resulting in ${\mu}{\gamma}$ product of about 1.5$[\times}10^{-9}cm^{2}$/V.

• Journal of the Korean Ceramic Society
• /
• v.34 no.3
• /
• pp.225-232
• /
• 1997

The performance characteristics of high rate discharge LiSOCl2 cells are highly affected by carbon cathode. During the cell discharge, SOCl2 reduction takes place at the porous carbon cathode, resulting in the precipitation of reaction products, mainly LiCl, within the pores of the substrate. This leads to eventual passivation of the cathode surface and resulting cell failure. To improve the cathode performance, we ex-amined discharge reactions of cathodes (half-cell, 50 mA/$\textrm{cm}^2$ constant current) with various surface density and thickness. The carbon cathode with the optimum capacity for our application is surface density 0.04 g/$\textrm{cm}^2$ and thickness 1.4mm carbon. The carbon cathode with surface density 0.04g/$\textrm{cm}^2$ and thickness 1.4 mm exhibits decreased polarization, increased discharge duration time and capacity (Ah/$\textrm{cm}^2$) as compared with that with surface density 0.04g/$\textrm{cm}^2$ and thickness 0.8mm. The porosities analyses on the two carbon cathodes show that total pore volume of the carbon cathode with thickness 1.4 mm is larger than that with thickness 0.8mm. The increased volume of mesopores (0.05$\mu$m~0.5$\mu$m) and macropores(>0.5$\mu$m) is ob-served with the carbon cathode with thickness 1.4mm as compared with that with thickness 0.8mm, which can be related with the observed capacity increase. We observed LiCl crystals, cubic crystallites and fused, plate-like aggregates, and some elemental S as discharge products by EDS and XRD.

• Journal of the Korean Society of Radiology
• /
• v.7 no.3
• /
• pp.251-257
• /
• 2013

Spatial dose rates of high dose $^{131}I$ therapy patients were Measured Three dimensional (X, Y, Z) distributions. I have constructed geometrical an aluminum support structure for spatial dose meters placed in 5 different heights, 8 different azimuthal angles, 6 different time interval and distance 100 cm from High dose$^{131}I$ therapy patients. when the height of vertical plane Spatial dose distribution is 100 cm, the Spatial dose rates is max and the error range is low. the vertical plane Spatial dose rates was found to be 71.85 ${\mu}Sv/h$ on the average at a distance of 100 cm, height 100 cm, from the patients 24 hours after $^{131}I$ oral administration. I divided 12 patients into two groups. I have analysed group A (drinking 5 L water) and group B (drinking 3 L water) in order to measure decrease spatial dose rates. I have found the spatial distributions of patient dose rates is $44.9{\pm}7.2$ ${\mu}Sv/h$ in group A and $100.3{\pm}8.1$ ${\mu}Sv/h$ in group B by 24 after $^{131}I$ oral administration. the reduction factor was found to be approximately 54 % through drinking 5 L water during 24 hours.

• Korean Journal of Food Science and Technology
• /
• v.42 no.2
• /
• pp.210-216
• /
• 2010

Rosa rugosa has traditionally been used as a folk remedy for diabetes. The objective of this study was therefore to demonstrate the inhibition of endothelial dysfunction activities through antioxidants and the anti-glycation of Rosa rugosa roots. Dried roots of Rosa rugosa were boiled in methanol for three hours, evaporated and lyophilized with a freeze-dryer. The methanolic extract of Rosa rugosa roots (RRE) was tested for antioxidant activities by measuring total polyphenol (TP) content, flavonoid content, 1,1-diphenyl-2-picrylhydrazyl free radical-scavenging activity (DPPH) assay, and ferric-reducing antioxidant power (FRAP) assay. The total TP content, flavonoid content, FRAP value, and $DPPHSC_{50}$ are $345.2\;{\mu}g$ gallic acid equivalents/mg dry matter (DM), $128.1\;{\mu}g$ quercetin equivalents/mg DM, 2.2 mM $FeSO_4$/mg DM and $34.2\;{\mu}g$ DM/mL, respectively. Treatment of RRE significantly lowered fluorescent formation due to advanced glycation reaction. In addition, reactive oxygen species (ROS) scavenging assay, monocyte adherent assay and transendothelial electrical resistance (TEER) assay were performed to investigate the possibility that RRE improves endothelial dysfunction-induced diabetic complications. The adhesion of THP-1 to treated HUVEC with RRE ($100\;{\mu}g/mL$; 33% and $500\;{\mu}g/mL$; 75%) was significantly reduced compared to HUVEC stimulated by glyceraldehydes-AGEs (advanced glycation end product). The TEER value ($88\;{\Omega}{\cdot}cm^2$) of stimulated HUVEC by glyceraldehydes-AGEs was reduced compared to non-stimulation ($113\;{\Omega}{\cdot}cm^2$). However, normalization with RRE increased endothelial permeability in a dose-dependent manner ($100\;{\mu}g/mL$; $102\;{\Omega}{\cdot}cm^2$ and $500\;{\mu}g/mL$; $106\;{\Omega}{\cdot}cm^2$). Thus, these results suggest that Rosa rugosa roots could be a novel candidate for the prevention of diabetic complications through antioxidants and inhibition of advanced glycation end product formation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.7
• /
• pp.541-545
• /
• 1998

(PZT, PST, PT)/ YBCO structured have been grown on single crystal $LaAlO_3$ using in-situ Nb:YAG pulsed laser deposition technique. The optimum conditions of fabrication for high quality films have been established under various oxygen pressure. TBCO was used as a metallic electrode for polarizing ferroelectric thin fillms. Lattice mismatch of these materials were found to be with in 3%. As a result XRD patterns and rocking curves, (PZT, PST, PT)/ YBCO multiayered thin films on $LaAlO_3$ substrates showed preferred orientation to c-axis. For invastigation on electrical properties of ferroelectric thin films, remanent polaiztion $P_r$ and coercive field $E_c$ were measured for three samples. At each optimum condition, they showed the values of P_r=60 \mu C/cm^2 and E_c=240kV/ cm for PT, 30\mu C/cm^2 and 105kV/cm for PZT, 1.5\mu C/cm^2$ and 15kV/cm for PST. Frequency dependence of dielectric properties of ferroelectric thin fillms was also investigated. As a result, it showed the frequency dependence was relatively small in the range of 10Hz~10kHz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.62-65
• /
• 1995

CdTe crystals were grown by the vertical Bridgman method. P-type DcTe crystals were grown with Cd:Te= 1:1.001 wt. % ratio, while n-type CdTe crystals were 1:1 Also, CdTe:In crystals were investigated, Lattic constants were 6.489${\AA}$ for p-type 6.480${\AA}$for n=type and 6.483${\AA}$ for CdTe:In EPD was 10$\^$-3/-10$\^$4/cm$\^$-2/ for n-, p-type CdTd, 10$\^$4/-10$\^$5/cm$\^$-2 for Cd:Te:In using by E-Ag solution for (111) plane The carrier concentration, the resistivity and the Hall carrier mobility measured by the van der Pauw method were p=5.78${\times}$10$\^$15/cm$\^$-3/, $\rho$=20.2$\Omega$cm, ${\mu}$$\sub$p/=75.6cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for p-typem n=2.98${\times}$10$\^$16/cm$\^$-3/, $\rho$=0.214$\Omega$cm, ${\mu}$$\sub$p/=978.9cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for n-type and n=7.45${\times}$10$\^$16/cm$\^$-3/, $\rho$=1.54 ${\times}$10$\^$3/$\Omega$cm, ${\mu}$$\sub$p/=658.4 cm$\^$-2/ V$\^$-1/ sec$\^$-1/ for CdTe:In crystals, Transmittance of p-type CdTe was 61% that of n-type was 65%, Cd:Te:In showed 60% IR transmittance.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1380-1381
• /
• 2011

본 논문에서는 SILVACO 사의 ATHENA와 ATLAS를 이용하여 후면 전극 실리콘 태양전지 (back contact silicon solar cell)의 전면 텍스쳐링 (texturing) 깊이 (depth)와 텍스쳐링 간격 (gap)에 따른 태양전지 효율(efficiency)에 미치는 영향을 분석하였다. 제안한 후면 전극 실리콘 태양전지는 (100) silicon wafer(n-type, $6{\times}10^{15}\;cm^{-3}$)을 기반으로 전면부에 텍스쳐링을, 후면부에 BSF(back surface field, $1{\times}10^{20}\;cm^{-3}$)와 에미터(emitter, $8.5{\times}10^{19}\;cm^{-3}$)를 구성하고, 셀간 피치를 1250 ${\mu}m$, BSF와 에미터의 간격을 25 ${\mu}m$으로 한 구조이다. 텍스쳐링 간격이 없이 텍스쳐링 깊이를 0 ${\mu}m$에서 150 ${\mu}m$으로 증가시켜 분석한 결과, 텍스쳐링 깊이가 증가할수록 효율이 23.90%에서 25.79%로 증가하였다. 텍스쳐링 간격을 1 ${\mu}m$에서 100 ${\mu}m$으로 증가시켜 분석한 결과, 텍스쳐링 깊이와 상관없이 텍스쳐링 간격이 증가할수록 후면 전극 실리콘 태양전지의 효율이 감소하였다. 텍스쳐링 유무에 따라 후면 전극 태양전지의 외부양자효율의 차이를 보였고 텍스쳐링이 있을 때 외부양자효율이 보다 높은 값을 얻었다.

• Journal of Environmental Science International
• /
• v.16 no.4
• /
• pp.409-414
• /
• 2007

Effects of dimethipin on ${\alpha}$-amylase activity of barley seeds were investigated. In the treatments of $1{\mu}M\;and\;10{\mu}M$ dimethipin, the indexes of germination were reduced to 17% and 24 % respectively. After seed germination, dimethipin was added to germinated seedlings and then the seedlings were kept to measure seedling length under illumination for 7 days. In control, the length of seedling was 5.7 cm, but in the treatments of $1{\mu}M$ dimethipin and $10{\mu}M$ dimethipin, seedling lengths were 5.5 cm and 1.2 cm respectively. In the relationship between dimethipin concentrations and ${\alpha}$-amylase activities, there was a linear curve. The more dimethipin was added to the seeds, the more ${\alpha}$-amylase activities were inhibited. In the treatments of $1{\mu}M$ dimethipin and $10{\mu}M$ dimethipin, ${\alpha}$-amylase activities were reduced to 33% and 71% respectively. Dimethipin also inhibited ${\alpha}$-amylase activities increased by gibberellin and the content of soluble protein. Therefore, it could be suggested that dimethipin might inhibit directly the activities of hydrolysis enzymes including ${\alpha}$-amylase or the expression of ${\alpha}$-amylase genes as germination and seedling growth were severely disturbed.

• Journal of Technologic Dentistry
• /
• v.37 no.2
• /
• pp.69-76
• /
• 2015

Purpose: In this study, the marginal fitness of ceramic Co-Cr metal crown made by precision casting, milling, and selective laser melting method were compared. Methods: The ceramic Co-Cr metal crown manufactured by precision casting used the lost wax(LC specimen) method. The abutment were scanned and then made by milling(CM specimen), selective laser melting(CS specimen) method. The specimen were cut bucco-lingual and mesio-distal, and absolute marginal discrepancy and marginal gap were measured using a digital microscope. The surface roughness of the crown was also observed. Results: On the bucco-lingual axial, absolute marginal discrepancy was the LC specimen $31.72({\pm}4.58){\mu}m$, the CM specimen $78.29({\pm}3.28){\mu}m$ and the CS specimen $143.13({\pm}3.83){\mu}m$, respectively. On the bucco-lingual axial, marginal gap was the LC specimen $22.70({\pm}1.46){\mu}m$, the CM specimen $22.70({\pm}1.49){\mu}m$ and CS specimen $99.60({\pm}1.57){\mu}m$, respectively. Conclusion: For ceramic Co-Cr metal crowns, LC specimen was superior for absolute marginal discrepancy and marginal gap. The surface of metal crowns by selective laser melting were the roughest.