• The Korean Journal of Pain
• /
• v.14 no.2
• /
• pp.234-238
• /
• 2001

Percutaneous laser discectomy has potential advantages over conservative therapy and classical open surgery as a minimally invasive procedure, although clinical experiences are limited. We experienced a patient treated with herniated lumbar discs using Nd：YAG laser. A 55-year-old woman complained of severe back pain with sciatica on L4/5 and L5/S1 dermatome for several months. The MRI finding showed bulging discs at L4/5 and L5/S1. Epidural, transsacral and root block treatments were attempted without effect. Under fluoroscopic guidance, a 14 G biopsy needle was inserted into the L4/5 and L5/S1 disc spaces to the margin of the nucleus pulposus. Laser irradiation for vaporization of tissue was performed at 20 W/second to 1200 J. A laser fiber ($600{\mu}m$) was advanced 1 cm from the tip of the needle. At the end of the procedure, the patient began to feel relief of pain (VAS changed from 9 to 4) and was discharged the same day after staying 2 hours in the recovery room. Antibiotics were administered for prevention of discitis. She had no complaints of pain until the 1-month follow up visit. Percutaneous laser discetomy technique has the disadvantages of expensive equipment, high temperature and amount of vaporing disc tissue is empirical. However, this technique, as one of the therapeutic modalities for disc herniation, provides faster relief from acute attack than conservative management techniques in carefully selected patients with sciatica due to disc prolapse.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.3
• /
• pp.161-164
• /
• 2002

Gentisic acid is a skin-whitening agent which inhibits the tyrosinase activity, an essential enzyme in the process of biological synthesis of melanin. Since melanin is synthesized in melanocytes located between the viable epidermis and dermis layer, drug amount delivered into the epidermis/dermis layer can provide valuable information for the biological effect of skin-whitening agents. The purpose of this study was to prepare the gentisic acid patches with 2% dodecylamine as enhancer, and to observe the in vitro skin permeation and in vivo skin deposition of gentisic acid. Gentisic acid in DuroTak 87-2510 patch formulation permeated across hairless mouse skin at the rate of $40.79\;{\mu}g/cm^2/hr$. In vivo study showed that the gentisic acid amount in both the stratum corneum and the viable epidermis/dermis increased with the increase of application time. The amount of gentisic acid in the stratum corneum was higher than that in the epidermis/dermis layer, and was expected to provide a reservoir effect even after removing the patches. Thus, the patch formulation seems to be useful for the topical delivery of skin-whitening agent into the epidermis/dermis layer, the target site.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.6
• /
• pp.585-590
• /
• 2009

The purpose of this study was to examine the effects of oral-administered sex hormone for hybrid sturgeon, bester juvenile. The bester juveniles (2 months after hatching) were received a diet containing various doses of $17\alpha$-methyltestosterone (MT) or estradiol-$17\beta$ ($E_2$) for 6 months. Somatic growth of bester sturgeon juvenile did not show significant differences between experimental and control groups (27.9-30.5 cm; 125.1-161.7 g), although survival percentages showed a decreasing tendency in MT-treated animals. By histological examination, germ cells were recorded as smooth type in MT-treated fish and uneven type of germinal epithelium in $E_2$-treated animals. Their sex ratios were 5:4:1 (male: female: undifferentiation) in control and low dose of MT-treated fish (1 mg/kg), and 9:1:0 in fish treated with high dose of MT (10 mg/kg), whereas the ratios were reversed by both low and high doses of $E_2$ treatment, recorded as 2:8:0. Gonadal areas were not significantly differed in all trials (424,600.4 - 1,039,656.3 ${\mu}m^2$). Total number of germ cells, number of germ cells per gonadal areas and number of germ cells per area were significantly higher to 144.7-148.7 cells/section, 374.0-408.5 $cells/mm^2$ and 1,599.5-1,670.9 $cells/mm^2$ in $E_2$ treatment than those of others (30.4-63.9 cells/section, 148.4-226.9 $cells/mm^2$ and 850.0-1,050.6 $cells/mm^2$), respectively. And somatic growth according to their gender was not significantly differed between male and female.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.1
• /
• pp.39-50
• /
• 2008

We have manufactured Ag pastes for gravure printing by adding different solvent contents. Then the gravure printability and properties of conductive patterns gravure-printed by the different rheology characteristics of pastes were investigated. The dispersity of pastes was increased and the viscosity and shear rate dependence of viscosity for pastes were decreased by increasing the solvent content. Also storage modulus G', loss modulus G" and angular frequency value when G" starts to be bigger than G' of pastes were increased by decreasing the solvent content. These mean a flow drop of paste. As a result of gravure printing using two plates which have different line counts(175line and 350line), conductive patterns printed using 175line were spreaded more but Ag packing, thickness and conductivity of the conductive patterns were better than those printed using 350line. And the spread values of conductive patterns were increased with solvent contents but the best properties for Ag packing, surface roughness and conductivity of the conductive pattern were obtained by paste (3) which has 550cps of viscosity at $100s^{-1}$ and tan ${\delta}$ > 1 at 10rad/s. As a result of gravure printing using 350 line plate and paste (3), the conductive pattern has $1.2{\mu}m$ of film thickness and $1.9{\times}10^{-5}{\Omega}{\cdot}cm$ of conductivity.

• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.173-176
• /
• 2014

We have investigated the seed layer formation of front side contact using the inkjet printing process. Conductive silver ink was printed on textured Si wafers with 80 nm thick $SiN_x$ anti reflection coating (ARC) layers and thickened by light induced plating (LIP). The inkjet printable sliver inks were specifically formulated for inkjet printing on these substrates. Also, a novel method to prepare nano-sized glass frits by the sol-gel process with particle sizes around 5 nm is presented. Furthermore, dispersion stability of the formulated ink was measured using a Turbiscan. By implementing these glass frits, it was found that a continuous and uniform seed layer with a line width of $40{\mu}m$ could be formed by a inkjet printing process. We also investigated the contact resistance between the front contact and emitter using the transfer length model (TLM). On an emitter with the sheet resistance of $60{\Omega}/sq$, a specific contact resistance (${\rho}_c$) below $10m{\Omega}{\cdot}cm^2$ could be achieved at a peak firing temperature around $700^{\circ}C$. In addition, the correlation between the contact resistance and interface microstructures were studied using scanning electron microscopy (SEM). We found that the added glass particles act as a very effective fire through agent, and Ag crystallites are formed along the interface glass layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.509-513
• /
• 2000

The physical and electrical characteristics of MgO and Pt thin-films on it deposited by reactive sputtering and rf magnetron sputtering respectively were analyzed with annealing temperature and time by four point probe SEM and XRD. Under annealing conditions of 100$0^{\circ}C$ and 2 hr, MgO thin-film had the properties of improving Pt adhesion to SiO$_2$and insulation without chemical reaction to Pt thin-film and the sheet resistivity and the resistivity of Pt thin-film deposited on it were 0.1288 Ω/ and 12.88 $\mu$$\Omega$.cm respectively. We made Pt resistance pattern on SiO$_2$/Si substrate by life-off method and fabricated Pt thin-film type microheater for thermal microsensors by Pt-wire Pt-paste and SOG(spin-on-glass). In the temperature range of 25~40$0^{\circ}C$ we estimated TCR(temperature coefficient of resistance) and resistance ratio of thin-film type Pt-RTD(resistance thermometer device). We obtained TCR value of 3927 ppm/$^{\circ}C$ close to the bulk Pt value. Resistance values were varied linearly within the range of the measurement temperature. The thermal characteristics of fabricated thin-films type Pt micorheater were analyzed with Pt-RTD integrated on the same substrate. The heating temperature of Pt microheater could be up to 40$0^{\circ}C$ with 1.5 watts of the heating power.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.7-10
• /
• 2006

Four programs, i.e. TRMM, ADEOS2, ASTER, and ALOS are going on in Japanese Earth Observation programs. TRMM and ASTER are operating well, and TRMM operation will be continued to 2009. ADEOS2 was failed, but AMSR-E on Aqua is operating. ALOS (Advanced Land Observing Satellite) was successfully launched on $24^{th}$ Jan. 2006. ALOS carries three instruments, i.e., PRISM (Panchromatic Remote Sensing Instrument for Stereo Mapping), AVNIR-2 (Advanced Visible and Near Infrared Radiometer), and PALSAR (Phased Array L band Synthetic Aperture Radar). PRISM is a 3 line panchromatic push broom scanner with 2.5m IFOV. AVNIR-2 is a 4 channel multi spectral scanner with 10m IFOV. PALSAR is a full polarimetric active phased array SAR. PALSAR has many observation modes including full polarimetric mode and scan SAR mode. After the unfortunate accident of ADEOS2, JAXA still have plans of Earth observation programs. Next generation satellites will be launched in 2008-2012 timeframe. They are GOSAT (Greenhouse Gas Observation Satellite), GCOM-W and GCOM-C (ADEOS-2 follow on), and GPM (Global Precipitation Mission) core satellite. GOSAT will carry 2 instruments, i.e. a green house gas sensor and a cloud/aerosol imager. The main sensor is a Fourier transform spectrometer (FTS) and covers 0.76 to 15 ${\mu}m$ region with 0.2 to 0.5 $cm^{-1}$ resolution. GPM is a joint project with NASA and will carry two instruments. JAXA will develop DPR (Dual frequency Precipitation Radar) which is a follow on of PR on TRMM. Another project is EarthCare. It is a joint project with ESA and JAXA is going to provide CPR (Cloud Profiling Radar). Discussions on future Earth Observation programs have been started including discussions on ALOS F/O.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.69-73
• /
• 2004

Ni alloy tape is electropolished to be used as a metal substrate for fabrication of IBAD (ion-Beam Assisted Deposition)-MgO texture template fur HTS coated conductor. Electropolishing is needed to obtain a very smooth surface of Ni alloy tape because the in-plane texture of templates is sensitive to the roughness of metal substrate. The critical current of YBCO coated conductor depends on the texture of YBCO that depends on the texture of the IBAD MgO layer. And so the smoothness of the metal substrate is directly related to the superconducting properties of the coated conductor. In this study, we have prepared a reel-to-reel electropolishing apparatus to polish the Ni alloy tapes for IBAD. Various electropolishing conditions were investigated to improve the surface roughness. Hastelloy tape is continuously electropolished with high polishing current density (0.5 ∼ 2 A/$\textrm{cm}^2$) and fast processing time (1 ∼ 3 min). Polished hastelloy tapes have surface roughness(RMS) of below 1 nm on a 5 ${\times}$ 5 $\mu\m^2$ from AFM and SEM.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.1-13
• /
• 1998

Seasonal variation of algae distribution were studied in the Chuam reservoir from August 1996 to July 1997. As a result, 127 taxa were observed, representing 6 classes, 14 orders, 5 suborders, 29 families, 2 subfamilies, 54 genus, 118 species, 7 variaties and 2 formula. The majors of them are Chlorophyceae (59 taxa), Bacillariophyceae(39 taxa) and Cyanophyceae(20 taxa). The number of species was that 35 and 31 taxa were occurred in August 1996 and April 1997, 11 and 17 taxa in July 1997 and October 1996 respectively at Dam station, 53 taxa were occurred in September, 18 taxa in November at Munduck station. The biomass composition of occurrence species were as fallowes; Cyanophyceae are 80%, Bacillariophyceae 14% and Chlorophyceae 5% at Dam station and Cyanophyceae are 90%, Bacillariophyceae 1.3% and Chlorophyceae 0.4% at Munduck at Munduk station. At Munduk station, water bloom occurred by Cyanophyceae(99.9%, 3.7 $\times$ 10$^{7}$ cells/L) in November 1996 and the major causing algae was Microcrystis aeruginosa. Microcystis aeruginosa was dominant species (dominant index : 0.72 - 0.99) during summer and autumn, Fragilaria crotonensis and Asterionella formasa (DI : 0.33 - 0.74) during winter and spring. The water quality factors of the Chuam reservoir were that the values of water temperature ranged of 3.6 - 31.4$\circ$C, pH 6.7 - 9.0, conductivity 69.6-118.2 $\mu $s/cm, and turbidity 1.0-22.5 NTU, and the proper temperature of water for algae growth was 15 and 16.7$\circ $C in April and November. Also the concentration of dissolved oxygen(DO) ranged of 6.8-15.5mg/L, total nitrogen(T-N) 0.54-1.78 mg/L, total phosphrous (T-P) 0.003-0.034 mg/L, and chlorophyll-a 0.9-23.2mg/m$^{3}$. The concentration of Chlorophyll-a was in inverse proportion T-N/T-P ratio.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.2 s.15
• /
• pp.33-36
• /
• 2006

Many issues arose to use the Pb-free solder as adhesive materials in MEMS ICs and packaging. Then this study for easy and simple sealing method using adhesive materials was carried out to maintain hermetic characteristic in MEMS Package. In this study, Hermetic characteristic using negative PR (XP SU-8 3050 NO-2) as adhesive at the interface of Si test coupon/glass substrate and Si test coupon/LTCC substrate was examined. For experiment, the dispenser pressure was 4 MPa and the $200\;{\mu}m{\Phi}$ syringe nozzle was used. 3.0 mm/sec as speed of dispensing and 0.13 mm as the gap between Si test coupon and nozzle was selected to machine condition. 1 min at $65^{\circ}C$ and 15 min at $95^{\circ}C$ as Soft bake, $200\;mj/cm^2$ expose in 365 nm wavelength as UV expose, 1 min at $65^{\circ}C$ and 6 min at $95^{\circ}C$ as Post expose bake, 60 min at $150^{\circ}C$ as hard bake were selected to activation condition of negative PR. Hermetic sealing was achieved at the Si test coupon/ glass substrate and Si test coupon/LTCC substrate. The leak rate of Si test coupon/glass substrate was $5.9{\times}10^{-8}mbar-l/sec$, and there was no effect by adhesive method. The leak rate of Si test coupon/LTCC substrate was $4.9{\times}10^{-8}mbar-l/sec$, and there was no effect by dispensing cycle. Better leak rate value could be achieved to use modified substrate which prevent PR flow, to increase UV expose energy and to use system that controls gap automatically with vision.