• The korean journal of orthodontics
• /
• v.42 no.4
• /
• pp.159-168
• /
• 2012

Objective: The aims of this study were to investigate mandibular deformation under clenching and to estimate its effect on the stability of orthodontic mini-implants (OMI). Methods: Three finite element models were constructed using computed tomography (CT) images of 3 adults with different mandibular plane angles (A, low; B, average; and C, high). An OMI was placed between #45 and #46 in each model. Mandibular deformation under premolar and molar clenching was simulated. Comparisons were made between peri-orthodontic mini-implant compressive strain (POMI-CSTN) under clenching and orthodontic traction forces (150 g and 200 g). Results: Three models with different mandibular plane angles demonstrated different functional deformation characteristics. The compressive strains around the OMI were distributed mesiodistally rather than occlusogingivally. In model A, the maximum POMI-CSTN under clenching was observed at the mesial aspect of #46 (1,401.75 microstrain [${\mu}E$]), and similar maximum POMI-CSTN was observed under a traction force of 150 g (1,415 ${\mu}E$). Conclusions: The maximum POMI-CSTN developed by clenching failed to exceed the normally allowed compressive cortical bone strains; however, additional orthodontic traction force to the OMI may increase POMI-CSTN to compromise OMI stability.

• Corrosion Science and Technology
• /
• v.16 no.3
• /
• pp.100-108
• /
• 2017

In this investigation corrosion behavior of newly developed high-pressure die cast Al-Ni (N15) and Al-Ni-Ca (NX1503) alloys was studied in 3.5% NaCl solution. The electrochemical corrosion behavior was evaluated using open circuit potential (OCP) measurement, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. Potentiodynamic polarization results validated that NX1503 alloy exhibited lower corrosion current density ($i_{corr}$) value ($5.969{\mu}A/cm^2$) compared to N15 ($7.387{\mu}A/cm^2$). EIS-Bode plots revealed a higher impedance (${\mid}Z{\mid}$) value and maximum phase angle value for NX1503 than N15 alloy. Equivalent circuit curve fitting analysis revealed that surface layer ($R_1$) and charge transfer resistance ($R_{ct}$) values of NX1503 alloy was higher compared to N15 alloy. Immersion corrosion studies were also conducted for alloys using fishing line specimen arrangement to simultaneously measure corrosion rates from weight loss ($P_W$) and hydrogen volume ($P_H$) after 72 hours and NX1503 alloy had lower corrosion rate compared to N15 alloy. The addition of Ca to N15 alloy significantly reduced the Al3Ni intermetallic phase and further grain refinement may be attributed for reduction in the corrosion rate.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.489-500
• /
• 1995

In the Chinhae Bay, Korea, sedimentation rates and sedimentary record of anthropogenic metal loads were determined by $^{210}Pb$ dating and heavy metal analysis of four sediment cores . The sedimentation rates varied from 0.16g/$cm^2$/yr(3.1mm/yr) at Sta. Ct, located within narrow waterway to 0.24g/$cm^2$/yr(4.8mm/yr) at Sta. Cl, located in Haengam Bay. Maximum contents of Mn, Zn, Cu and Cr were observed at Sta. C2 located near the mouth of Masan Bay, while minimum contents were observed at Sta. CB. Mn/Fe ratios at Sta. C2 and Sta. C4 showed gradually increasing and decreasing downward, respectively, in the upper layer of sediment cores. This suggests that Mn may be diagenetically redistributed in highly reduced environment. At Sta. C2, the concentrations of Zn and Cu began to increase from 1920s by anthropogenic input and have been remarkablely increasing since mid 1960s. At Sta. C3, located near Sungpo, anthropogenic input of these two elements has also slightly increased after 1970s. However, pollution of these two elements was not significant in Haengam Bay(Sta. Cl) and Chiljun watenway(Sta. C4). The pollution of Co, Ni and Cr was not remarkable in all core samples except surface sediment of Sta. C2. The total input of anthropogenic Zn and Cu since 1920s was estimated to be 28~792 $\mu\textrm{g}$/cm2 and 0~168$\mu\textrm{g}$/cm2, respectively. Sta. C2 showed remarkablely higher values relative to other stations: anthropogenic loads of Zn and Cu constituted 27% and 29% of the total sedimentary inventories at the present day, respectively. Fe, Ni, Cr and Co contents showed good correlation(r>0.8) with each other. Anthropogenic Zn and Cu also showed a very good positive correlation(>0.9). However, correlation between these two group of element was quite scattered, indicating different sources and geochemical behaviors.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.11 no.1
• /
• pp.28-30
• /
• 2013

A 66-year-old male with chronic alcoholism presented with tremor, gait disturbance, memory impairment, insomnia, decreased appetite, and confusion. The patient had been taking lithium daily for treatment of bipolar disorder. Brain CT showed no specific abnormality, and serum lithium and ammonia levels were 3.63 mEq/L (therapeutic range, 0.6~1.2 mEq/L) and $85{\mu}g/dL$ (reference range: $19{\sim}54{\mu}g/dL$), respectively. Therefore, the initial differential diagnosis included chronic lithium intoxication, hepatic encephalopathy, Wernicke encephalopathy, or alcohol withdrawal syndrome. Even with the provision of adequate hydration, the patient's neurologic status did not show improvement, so that lactulose enema, thiamine replacement, and continuous venovenous hemodiafiltration (CVVHDF) were started on the third admission day. By the fifth admission day he had made a rapid neurologic recovery, and was discharged on the 20th admission day. Therefore, CVVHDF might be a treatment for patients with chronic lithium intoxication, because, even if serum lithium concentration is normal, lithium concentration in the brain may be different from that of the serum.

• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.493-497
• /
• 2012

The objective of this study was carried out in order to evaluate the antioxidative activities of n-hexane fractions from medicinal herbs. Certain parts from 6 species of edible and medicinal herbs were extracted with methanol. Radical scavenging activity of the n-hexane fractions against DPPH and ABTS radicals were observed to be high in Psoralea corylifolia, and Scutellsria barbata; it also significantly increased (p<0.05). For a comparison of the effect of various concentration of fractions, as the concentration of treatment increased, the antioxidative effects on radical scavenging activity also oncreased; yet it was not significant. The antioxidative effect of medicinal plants was dependent on the concentration but was not significant. Therefore, these results indicate that edible wild plants, such as Psoralea corylifolia, and Scutellsria barbata may be useful as potential antioxidant sources for improving the human antioxidant defense system against disease.

• Journal of Korean Biological Nursing Science
• /
• v.3 no.1
• /
• pp.1-10
• /
• 2001

뇌손상이라고 하는 과도한 stress를 받았을 때 free cortisol의 분비되는 양과 urinary free cortisol의 circadian 리듬에 어떻게 영향을 주는지 확인하기 위하여 시도하였다. 연구대상은 대조군은 건강한 젊은 여성 6명과 실험군응 CT상 뇌에 손상을 받은 4명의 여성으로 30대 환자이었다. 담당의사와 중환자실 관리책임자의 동의하에서 시도되었으며, 실험기간은 2000년 7월 1일에서 7월 10일까지였다. 대조군과 실험군의 뇨를 채취하여 뇨중 free cortisol 농도의 circadian rhythm을 알아보기 위해 채뇨 후 분석하였다. 채뇨는 뇌손상을 받고 응급실을 통해 신경외과 중환자실에 입원한 지 5시간 이내에 해당된 환자로 24시간 유지되는 foley catherization 상태하에서 12:00부터 3일동안 72시간을 2시간 간격으로 채뇨하였고, 대조군은 오전 12시부터 24시간 동안 2시간 간격으로 채뇨하였다. 측정방법으로는 cortisol의 정량은 solid-phase radioimmuoassay 방법을 이용하였으며, 분석재료는 Coat-A-Count(R) Cortisol kit(DPC, U.S.A.)을 사용하여 DPC사의 측정방법을 따랐다. 연구대상자의 free cortisol의 총량은 대조군에서는 $42.8{\mu}g$이었고, 실험군은 1일에 $991.2{\mu}g$, 2일에 $809{\mu}g$, 3일에 $544.2{\mu}g$으로 대조군과 통계적으로 유의한 차이를 나타내(p<.05), 실험군에서 현저하게 증가된 양상을 보였고, 시간이 지나면서 점점 감소하는 경향을 나타냈다. 시간별로 t-검정으로 분석한 결과로는 모든 시간대에서 대조군과 실험군의 평균치는 통계적으로 유의한 차이를 나타냈다. Free cortisol의 circadian에서는 대조군에서는 정상인의 cortisol의 circadian의 경우와 같은 리듬을 보였으나, 손상을 받은 실험군의 경우 분비량은 현저하게 증가했음을 보여주었다. 최고치가 제1일에 18:00과 다음날 10:00에 나타나 최고치가 2회 나타났으며, 제2일에도 제1일과 마찬가지로 18:00에 나타났고, 제3일에는 24:00에 나타나 제1일보다 제2일에는 최고치가 한 번 나타난 리듬을 보여주었고, 분비량은 2일에 감소하였다. 제3일에는 최고치가 8시간 지연된 나타난 리듬의 변화를 보여주었다. 최저치는 제1일, 제2일, 제3일 모두 24:00에 나타난 리듬을 보여주었다. 이상의 결과에서 실험군인 뇌손상 환자군에서는 뇌손상이 과도한 stress로 작용하여 환자의 free cortisol 분비량과 circadian 리듬에도 영향을 주는 것으로 나타났다. 그러므로 뇌손상환자를 간호하는 간호사는 스트레스상태인 것을 인지하여 환자 개개인에 필요한 간호를 해야 할 것으로 사료된다.

• Progress in Medical Physics
• /
• v.19 no.3
• /
• pp.191-199
• /
• 2008

PTV considered for the energy, dose distribution exposed to lung and spinal cord, and the characteristic of DVH(Dose Volume Histogram) were compared and investigated by planning the intensity modulated radiation therapy (IMRT) using the photon energies of 6 MV and 10 MV according to tumor location like as the anterior, middle, and posterior regions of lung, and the mediastinum region in lung cancer patients. Our institution installed the linear accelerator (Varian 21 EX-s, USA) equipped with 120 multileaf collimator for lung cancer patients, which is producing the photon energies of 6 MV and 10 MV, and radiation therapy planning was performed with ECLIPSE system (Varian, SomaVision 6.5, USA), which support inverse treatment planning. The tomographic images of 3 mm slice thickness for lung cancer patients were acquired using planning CT, and acquired tomographic images were sent to the Varis system, and then treatment planning was performed in the ECLIPSE system. The radiation treatment planning of the IMRT was processed from various angles according to the regions of the tumor, and using various beam lines according to the size and location of the tumor. The investigation of the characteristic of dose distributions for the energy of 6 MV and 10 MV according to tumor locations in lung cancer patients resulted that the maximum dose of 10 MV energy was 1.2% less than that of 6 MV energy without depending on the tumor location of lung cancer, and the reduction effects of MU were occurred from 10 to 25 MU. Radiation dose exposed to the lung satisfied the less 30% of V20, however radiation dose in 6 MV energy was from 0.1% to 0.5% less than that in 10 MV energy. Radiation dose exposed to the spinal cord for 6 MV energy was from 0.6% to 2.1% less than that for 6 MV energy.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.49-63
• /
• 2018

Purpose : The purpose of this study is investigating the changes of treatment plan and comparing skin dose with or without the skin flash. To investigate optimal applications of the skin flash, the changes of skin dose of each plans by various thicknesses of skin flash were measured and analyzed also. Methods and Material : Anthropomorphic phantom was scanned by CT for this study. The 2 fields hybrid IMRT and the 6 fields static IMRT were generated from the Eclipse (ver. 13.7.16, Varian, USA) RTP system. Additional plans were generated from each IMRT plans by changing skin flash thickness to 0.5 cm, 1.0 cm, 1.5 cm, 2.0 cm and 2.5 cm. MU and maximum doses were measured also. The treatment equipment was 6MV of VitalBeam (Varian Medical System, USA). Measuring device was a metal oxide semiconductor field-effect transistor(MOSFET). Measuring points of skin doses are upper (1), middle (2) and lower (3) positions from center of the left breast of the phantom. Other points of skin doses, artificially moved to medial and lateral sides by 0.5 cm, were also measured. Results : The reference value of 2F-hIMRT was 206.7 cGy at 1, 186.7 cGy at 2, and 222 cGy at 3, and reference values of 6F-sIMRT were measured at 192 cGy at 1, 213 cGy at 2, and 215 cGy at 3. In comparison with these reference values, the first measurement point in 2F-hIMRT was 261.3 cGy with a skin flash 2.0 cm and 2.5 cm, and the highest dose difference was 26.1 %diff. and 5.6 %diff, respectively. The third measurement point was 245.3 cGy and 10.5 %diff at the skin flash 2.5 cm. In the 6F-sIMRT, the highest dose difference was observed at 216.3 cGy and 12.7 %diff. when applying the skin flash 2.0 cm for the first measurement point and the dose difference was the largest at the application point of 2.0 cm, not the skin flash 2.5 cm for each measurement point. In cases of medial 0.5 cm shift points of 2F-hIMRT and 6F-sIMRT without skin flash, the measured value was -75.2 %diff. and -70.1 %diff. at 2F, At -14.8, -12.5, and -21.0 %diff. at the 1st, 2nd and 3rd measurement points, respectively. Generally, both treatment plans showed an increase in total MU, maximum dose and %diff as skin flash thickness increased, except for some results. The difference of skin dose using 0.5 cm thickness of skin flash was lowest lesser than 20 % in every conditions. Conclusion : Minimizing the thickness of skin flash by 0.5 cm is considered most ideal because it makes it possible to keep down MUs and lowering maximum doses. In addition, It was found that MUs, maximum doses and differences of skin doses did not increase infinitely as skin flash thickness increase by. If the error margin caused by PTV or other factors is lesser than 1.0 cm, It is considered that there will be many advantages in with the skin flash technique comparing without it.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.103-109
• /
• 2006

This research is contents about output characteristic of optic current sensor that use faraday effect. optic current sensor used in an experiment is consisted of three parts.(1) Source of light used laser diode of 1310[nm].(2) Sensor section manufactured circularly according to gas insulated switchgear. And $9/125[{\mu}m]$ standard single mode optical fiber for communication was installed winding 20 [turn] on sensor section core surroundings of diameter 31 [cm].(3) Electrical signal of PD(Photo detector) is collected using NI company's 16bit DAQ board via terminal block. Collected data analyzed by different three signal processing methods. NI company's $Labview^{TM}$ was used to signal processing software. As a result, In signal processing of optic current sensor, we could know that noise greatly more influences the error generation than fluctuation of light intensity. also, 1 class CT(current transformer) manufacture that have error rate less than 1[%] was available by removing these

• Journal of the Korean Ceramic Society
• /
• v.55 no.4
• /
• pp.400-405
• /
• 2018

FCM nuclear fuel, a concept proposed as an accident tolerant fuel in light water reactors, consists of TRISO fuel particles embedded in a SiC matrix. The uniform dispersion of internal TRISO fuel particles in the FCM fuel is very important for improving the fuel efficiency. In this study, FCM sintered pellets with various volume ratios of TRISO-coated particles were prepared by hot press sintering. The distribution of TRISO-coated particles was quantitatively analyzed using X-ray ${\mu}CT$ and expressed as a dispersion uniformity index. TRISO-coated particles were most uniformly dispersed in the FCM pellets prepared using only overcoated TRISO particles without mixing of additional SiC matrix powder. FCM pellets with uniformly dispersed TRISO particle volume fraction of up to 50% were prepared using overcoated TRISO particles with varying thickness.