• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.662-669
• /
• 2010

To develop the manufacturing methods for the blanket first wall (FW) of the International Thermonuclear Experimental Reactor (ITER) and to verify the integrity of the joint, Be/Cu mockups were fabricated and tested at the KoHLT-1 (Korea Heat Load Test facility), a graphite heater facility located at the Korea Atomic Energy Research Institute (KAERI). Since Be and Cu joining is the focus of the present study, the fabricated mockups had a CuCrZr heat sink joined with three Be tiles as an armor material, unlike the original ITER blanket FW, which has a stainless steel structure and coolant tubes. Hot isostatic pressing (HIP) was carried out at $580^{\circ}C$ and 100 MPa for 2 hours as the method for Be/Cu joining. Three interlayers, namely, $1{\mu}mCr/10{\mu}mCu$, $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$, and $5{\mu}mTi/10{\mu}mCu$ were applied as a coating to the Be tiles by a physical vapor deposition (PVD) method. A shear test was performed with the specimens, which were fabricated by the same methods as those used to fabricate the mockups. The average values were 125 MPa to 180 MPa, and the samples with the $1{\mu}mCr/10{\mu}mCu$ interlayer showed the lowest value. No defect or delamination was found in the joints of the mockups by the developed ultrasonic test using a flat-type probe with a 10 MHz frequency and a 0.25 inch diameter. High heat flux (HHF) tests were performed at $1.0\;MW/m^2$ heat flux for each mockup using the given conditions, and the results were analyzed by ANSYS-CFX code. For the test criteria, an expected fatigue lifetime about 1,000 cycles was obtained by analysis with ANSYS-mechanical code. Mockups using the interlayers of $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$ and $5{\mu}mTi/10{\mu}mCu$ survived up to 1,100 cycles over the required number of cycles. However, one of the Be tiles in the other two mockups using the $1{\mu}mCr/10{\mu}mCu$ interlayer was detached during the screening test, and others were detached by discharge after 862 cycles. The integrity of the joints using the proposed interlayers was proven by the HHF test, but the other interlayer requires more study before it can be used for the joining of Be to Cu. Moreover, it was confirmed that the measured temperatures agreed well with the analysis temperatures, which were used to estimate the lifetime and that the developed facility showed its capability of the long time operation.

• Journal of Food Hygiene and Safety
• /
• v.32 no.3
• /
• pp.193-198
• /
• 2017

Scutellaria baicalensis, Eleutherococcus senticosus, and Angelica sinensis have been used as raw materials for health functional foods. This study was conducted to develop a novel method to analyze levels of baicalin (Scutellaria baicalensis), eleutheroside E (Eleutherococcus senticosus), and ligustilide (Angelica sinensis) simultaneously in health functional foods. The methanol extracted samples were analyzed and quantified via liquid chromatography-tandem mass spectrometry (LC-MS/MS) in the positive ion mode and the negative ion mode using multiple reaction monitoring. Standard calibration curves confirmed linearity with the correlation coefficient ($r^2$) of > 0.99 at $100-2000{\mu}g/mL$ concentration range. The limits of detection (LODs) and limits of quantitation (LOQs) were in the range of $13.0{\sim}35.2{\mu}g/L$ and $39.3{\sim}106.7{\mu}g/L$, respectively. The recovery results ranged between 91.4~109.9% at 3 different concentration levels with relative standard deviations (RSDs) less than 5%. The proposed analytical method was characterized with high accuracy and acceptable precision. The new method would be an effective tool to analyze baicalin, eleutheroside E, and ligustilide simultaneously in raw materials of health functional foods.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.6
• /
• pp.35-44
• /
• 2009

Naphthalene and TNT (2,4,6-trinitrotoluene) are defined by U.S. EPA as possible carcinogenic compounds known to have detrimental effects on the aquatic ecosystem and human body. There are, however, few researches on methods of analyzing micro-levels of naphthalene and TNT dissolved in groundwater. This study introduces and evaluates the newly developed analytical methods of measuring naphthalene and TNT in groundwater by using HPLC-FLD (Fluorescence detector) and MSD (Mass detector). The MDL, LOQ and salt effect of these methods, respectively, are compared with those of conventional methods which use HPLC-UV. For the analysis of naphthalene, HPLC-FLD was set in the maxima wavelength (Ex: 270 nM, Em: 330 nM) obtained from 3D-Fluorescence to be compared with HPLC-UV in 266 nM wavelength. The MDL ($0.3\;{\mu}g/L$) and LOQ ($2.0\;{\mu}g/L$) of naphthalene by using HPLC-FLD were approximately 80 times lower than those analyzed by HPLC-UV (MDL: $23.3\;{\mu}g/L$, LOQ: $163.1\;{\mu}g/L$). HPLC-MSD were used in comparison with HPLC-UV in 230 and 254 nM wavelength for the analysis of TNT. The MDL ($0.13\;{\mu}g/L$) and LOQ ($0.88\;{\mu}g/L$) of TNT analyzed by using HPLC-MSD were approximately 130 times lower than those obtained by using HPLC-UV in 230 nM (MDL: $16.8\;{\mu}g/L$, LOQ: $117.5\;{\mu}g/L$). The chromatogram of TNT analyzed by using HPLC-UV in 230 nM displayed elevated baseline as the concentration of ${NO_3}^-$ increases beyond 21 mg/L, while the analysis using HPLC-MSD did not demonstrate any change in baseline in presence of ${NO_3}^-$ of 63.7 mg/L which is 3.5 times higher than average concentration in groundwater. In conclusion, HPLC-FLD and HPLC-MSD may be used as suitable methods for the analysis of naphthalene and TNT in groundwater and drinking water. These methods can be applied to the monitoring of naphthalene and TNT concentration in groundwater or drinking water.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.4
• /
• pp.6-13
• /
• 1970

The variable-width and double-pulse generator Here described is completely transistorized so its size is small and it is convenient to handle. The frequency ran be varied from 1 KHz to 500KHz, the pulse width from 0.4$\mu$sec to 8$\mu$sec, amplitude from 1V to 10V, and interval of double pulse from 0$\mu$sec to 12$\mu$sec. Positive and negative signal or double pulse trains can he obtained. An analysis has been carried out for each stage and the design equations are derived. The experimental results are compared with the analysis.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.2
• /
• pp.119-128
• /
• 2017

BACKGROUND: Miscellaneous cereal have been largely consumed in Korea as due to their physiological functions beneficial to human health. The cereals are currently a social concern because they have been found to contain heavy metals. Thus, monitoring heavy metals in the cereals is an important requirement for food safety analysis. In this study, we determined arsenic concentration in the cereals randomly harvested from different markets. METHODS AND RESULTS: Inorganic arsenic was determined by ICP-MS coupled with HPLC system. The HPLC-ICP-MS analysis was optimized based on the limit of detection and recover test to reach $0.13-1.24{\mu}g/kg$ and 94.3-102.1%, respectively. The concentrations of inorganic arsenic equivalent to daily exposure were levels of $19.91{\mu}g/day$ in mixed grain, $1.07{\mu}g/day$ in glutinous rice, $0.77{\mu}g/day$ in black brown rice, $0.13{\mu}g/day$ in barley and $0.11{\mu}g/day$ in soybeans. CONCLUSION: The levels of arsenic in miscellaneous cereals were found lower than the recommended The Joint FAO/WHO Expert Committee on Food Additives (JECFA) levels, suggesting that the cereals marketed in Korea are not potential concern in risk assessment.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.17 no.2
• /
• pp.87-102
• /
• 2013

An n-string tangle is a three dimensional ball with n-strings which are properly embedded in the ball. In early 90's, C. Ernst and D. Sumners first used a tangle to describe a DNA-protein complex. In this model, DNA is represented by a string and protein is represented by a ball. Mu is a protein which binds to DNA at three sites and a DNA-Mu complex is called Mu-transpososome. Knowing the DNA topology within Mu-transpososome is very important to understand DNA transposition by Mu protein. In 2002, Pathania et al. determined that the DNA configuration within the Mu transpososome is three branched and five noded [12]. In 2007, Darcy et al. analyzed this by using mathematical tangle and concluded that the three branched and five noded DNA configuration is the only biologically reasonable solution [4]. In this paper, based on the result of Pathania et al. and Darcy et al., the author determines the DNA topology within the DNA-Mu complex after the whole Mu transposition process. Furthermore, a new experiment is designed which can support the Pathania et al.'s result. The result of this new experiment is predicted through mathematical knot thory.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.808-809
• /
• 2006

The decrease of the distance between particle centers due to the growth of the sinter necks can be explained by the well known two-particle model. Unfortunately this model fails to provide a comprehensive description of the processes for 3D specimens. Furthermore, there is a significant discrepancy between the calculated and the measured shrinkage because particle rearrangements are not considered. Only the recently developed analysis of the particle movements inside of 3D specimens using micro focus computed tomography $({\mu}CT)$, combined with photogrammetric image analysis, can deliver the necessary experimental data to improve existing sintering theories. In this work, ${\mu}CT$ analysis was applied to spherical copper powders. Based on photogrammetric image analysis, it is possible to determine the positions of all particle centers for tracking the particles over the entire sintering process and to follow the formation and breaking of the particle bonds. In this paper, we present an in-depth analysis of the obtained data. In the future, high resolution synchrotron radiation tomography will be utilized to obtain in-situ data and images of higher resolution.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.180-183
• /
• 2002

The new useful method for the direct determination of trace boron in iron matrix was studied by applying the precipitation of $Fe(OH)_3$ and ICP-AES. Optimum pH range was 11 ~ 12.5. Linear concentration range of boron was $0.01{\sim}1.0{\mu}g/m{\ell}$ in $5000 {\mu}g/m{\ell}$ solution as iron.

• Analytical Science and Technology
• /
• v.21 no.1
• /
• pp.53-57
• /
• 2008

In order to survey the contents of ethyl carbamate in alcoholic beverages, GC/MS-SIM method was used after extraction with dichloromethane in solid phase extract cartridge contained alcoholic beverages. In the applied GC/MS-SIM method, the values of recoveries and relative standard deviation were ranged from 85.2 % to 87.9 % and from 0.7 % to 1.9 %, the limit of detection and quantification were $2{\mu}g/kg$ and $10{\mu}g/kg$. Depending on alcoholic beverage kinds, the levels were variable and the average level was $194{\mu}g/kg$ for liquor, $105{\mu}g/kg$ for fruit wine, $62{\mu}g/kg$ distilled spirit, $28{\mu}g/kg$ for sake, $15{\mu}g/kg$ for yakju, $12{\mu}g/kg$ for other alcohol beverages, ND for soju, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.3
• /
• pp.284-289
• /
• 2009

We determined the influence of Sargassum beds on the water quality in Gamak Bay, Korea. Water temperature and salinity range from 3.3 to $23.4^{\circ}C$ and from 29.6 to 33.7 psu, respectively. Dissolved oxygen was 10.45 mg L-1 in the Sargassum bed and 9.23 mg L-1 in the control. Chlorophyll-a was $3.90{\mu}g\;L^{-1}$ in the Sargassum bed and 2.21${\mu}g \;L^{-1}$ in the control. Chemical oxygen demand were 1.14${\mu}g\;L^{-1}$ in the Sargassum bed and 1.43${\mu}g\;L^{-1}$ in the control. Total nitrogen were 0.038${\mu}g\;L^{-1}$ in the Sargassum bed and 0.067${\mu}g \;L^{-1}$ in the control. Total phosphorus were 0.043${\mu}g \;L^{-1}$ in the Sargassum bed and 0.072${\mu}g \;L^{-1}$ in the control. Multivariate statistical analysis was used to analyze data. Water temperature was highly positively correlated with DO (p<0.01). T-N was highly positively correlated with T-P (p<0.01).