• 제목/요약/키워드: ${\gamma}-Al_2O_3$

검색결과 306건 처리시간 0.024초

알루미늄 에칭액으로부터 베마이트 분말 합성 (Synthesis of boehmite powder from aluminum etching solution)

  • 박영수;위인희;조우석;김진호;황광택
    • 한국결정성장학회지
    • /
    • 제22권6호
    • /
    • pp.286-290
    • /
    • 2012
  • 알루미늄 에칭 폐액으로부터 boehmite(AlOOH) 분말을 합성하였다. 폐액에서 침전되어 있는 결정상은 gibbsite ($Al(OH)_3$)였으며, 산을 이용하여 pH를 조절한 결과 pH가 7~8 영역에서 boehmite 결정상이 얻어졌다. 침전 분말에 남아 있는 Na 이온을 제거하고자 세척공정을 진행하여 boehmite 분말을 얻었다. 합성한 분말의 평균입경은 약 40 nm이었다. 또한 열처리 온도가 증가함에 따라 boehmite는 ${\gamma}-Al_2O_3$${\delta}-Al_2O_3$, ${\Theta}-Al_2O_3$를 거쳐 ${\alpha}-Al_2O_3$ 결정상으로 상전이가 일어났다.

고분자 P123와 란탄이 도핑된 알루미나의 특성 연구 (Characterization of Alumina Doped with Lanthanum and Pluronic P123 via Sol-Gel Process)

  • 정미원;이미회
    • 한국세라믹학회지
    • /
    • 제45권5호
    • /
    • pp.297-302
    • /
    • 2008
  • To direct the evolution of nanostructure and immobilize ${\gamma}-Al_2O_3$ catalyst, nanocrystalline La-doped-$Al_2O_3$ powder were prepared by the sol-gel process with addition of an amphiphilic block copolymer template (pluronic P123: $(poly(ethyleneoxide)_{20}-poly(propyleneoxide)_{70}-poly(ethyleneoxide)_{20})$. The dried gel is amorphous, whereas heating at temperature above $700^{\circ}C$ leads to the formation of nanocrystalline ${\gamma}$ and ${\delta}-Al_2O_3$ and these two phases is kept until $1100^{\circ}C$. ${\alpha}-A1_2O_3 $starts to form at $1200^{\circ}C$ with $LaAl_{11}O_{18}$. The surface morphology and crystal structure has been observed by field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD). Solid state $^{27}Al$ MAS NMR indicates two types of local environment, i.e. octahedral and tetrahedral sites. The surface area and pore size was compared among these powders using the BET nitrogen adsorption measurements.

평탄형 접촉 연소식 가스 센서의 특성 (Characteristics of Catalytic Combustible Gas Sensor Based on Planar Technology)

  • 김영복;노효섭;박진성
    • 한국전기전자재료학회논문지
    • /
    • 제21권9호
    • /
    • pp.812-817
    • /
    • 2008
  • A catalytic combustible sensor for LPG/LNG detection was fabricated on $Al_2O_3$ substrate using planar technology. The catalysts of Pd and Pt were added to ${\alpha}$- and ${\gamma}-Al_2O_3$ powders. The mixture of Pt, Pd and $Al_2O_3$ were homogenized by using a three roll mixer. TCR characteristics of Pt heater were optimized with the heat treatment temperature. Sensing properties were investigated as a function of the microstructure of $Al_2O_3$, the gas concentration and the variation of input voltage. ${\alpha}-Al_2O_3$ sintered at 500 $^{\circ}C$ is more suitable as LPG/LNG sensor due to good grain shape and size distribution of about 300 nm than that of ${\gamma}-Al_2O_3$ which is in irregular shape and with a particle size of 5-30 ${\mu}m$. The sensor has shown maximum output voltage of 14 mV for 1000 ppm $C_4H_{10}$ and 3.8 mV for 1000 ppm $CH_4$ at 5.0 V input voltage.

황화 $Ni-W/\gamma-Al_2O_3$ 촉매에 의한 Dibeenzothiophene의 수첨탈황반응 (Hydrodesulfurization of Dibenzothiophene by Sulfided $Ni-W/\gamma-Al_2O_3$ Catalyst)

  • 김경림;정지원
    • 한국대기환경학회지
    • /
    • 제2권2호
    • /
    • pp.51-59
    • /
    • 1986
  • Hydrodesulfurization of dibenzothiophene (DBT) dissolved in n-heptane was studied over sulfided $Ni - W/\gamma - Al_2O_3$ catalyst at temperature ranges from 513 to 573 K and at pressure ranges from 20 to 60 x $10^5$ Pa. Hydrogenation of biphenyl (BP) and cyclohexylbenzene (CHB) observed in products were also run. The products were almost biphenyl and cyclohyxylbenzene, and the conversion of DBT was very sensitive to temperature. Concerning the products distribution while the formation of biphenyl decreased, the formation of cyclohexylbenzene increased in the range of high pressure. The reaction network was found to be sequential reaction which formed cyclohexybenzent through the intermediate of biphenyl. The disappearances of DBT and biphenyl were the first order with respect to DBT and biphenyl and their activation energys were 24.3 and 13.6 Kcal/mol, respectively.

  • PDF

SrAl2O4:Eu+2, Dy+3 장잔광 형광체 합성에 있어서 알루미늄 화합물에 따른 열적거동 및 발광특성 변화 (Photoluminescence and Thermal Characteristics of SrAl2O4:Eu+2, Dy+3 Phosphors Synthesized with Various Aluminum Compounds)

  • 이영기;이유기
    • 한국재료학회지
    • /
    • 제17권11호
    • /
    • pp.612-617
    • /
    • 2007
  • Both photoluminescence and thermal characteristics for $SrAl_2O_4:Eu^{+2},\;Dy^{+3}$ phosphors synthesized with various aluminum compounds (${\alpha}-Al_2O_3$, ${\gamma}-Al_2O_3$, amorphous-$Al_2O_3$ and $Al(OH)_3)$ were investigated in this study. The formation temperature of the host $SrAl_2O_4$ crystal is changed by these various aluminum compounds, as a result of the different thermal decomposition temperature of $SrCO_3$ phase. Among these compounds, the amorphous-$Al_2O_3$ phase shows the lowest formation temperature of the host $SrAl_2O_4$ crystal. The PL emission and excitation spectra of $SrAl_2O_4:Eu^{+2},\;Dy^{+3}$ phosphor are not affected by these aluminum compounds. After the removal of the Xenon lamp excitation (360 nm), however, the excellent longphosphorescent property of the phosphor is obtained by the amorphous-$Al_2O_3$ phase, although the decay time for all phosphors decrease exponentially.

제올라이트 쉬트 담지 백금촉매의 제조 및 톨루엔 연소 특성 (Preparation of Pt Catalyst Supported on Zeolite Sheet and Its Performance of Toluene Combustion)

  • 김진배;임나래;김홍수;유윤종
    • 공업화학
    • /
    • 제22권3호
    • /
    • pp.323-327
    • /
    • 2011
  • 원통형으로 성형된 zeolite sheet (제올라이트를 함유하는 세라믹 종이)는 VOC 제거를 위한 효과적인 흡착로터로서 사용될 수 있다. 본 연구에서는 ZSM-5가 함유된 zeolite sheet 지지체에 Pt를 담지한 후 톨루엔 연소 촉매 성능을 ${\gamma}-Al_2O_3$ 및 cordierite honeycomb 지지체에 담지된 Pt 촉매와 비교하였다. Pt/zeolite sheet 촉매는 $Pt/{\gamma}-Al_2O_3$ 또는 Pt/cordierite honeycomb 촉매에 비하여 톨루엔 연소반응에 높은 활성을 나타냈다. 한편, Pt/zeolite sheet 촉매를 상온에서 $NH_3-H_2O$ 증기로 전처리하면 zeolite sheet에 담지된 Pt 입자의 분산도가 향상되었으며, 톨루엔 연소 촉매 활성이 크게 증가하였다.

Gas Permeation of SiC Membrane Coated on Multilayer γ-Al2O3 with a Graded Structure for H2 Separation

  • Yoon, Mi-Young;Kim, Eun-Yi;Kim, Young-Hee;Whang, Chin-Myung
    • 한국재료학회지
    • /
    • 제20권9호
    • /
    • pp.451-456
    • /
    • 2010
  • A promising candidate material for a $H_2$ permeable membrane is SiC due to its many unique properties. A hydrogen-selective SiC membrane was successfully fabricated on the outer surface of an intermediate multilayer $\gamma-Al_2O_3$ with a graded structure. The $\gamma-Al_2O_3$ multilayer was formed on top of a macroporous $\alpha-Al_2O_3$ support by consecutively dipping into a set of successive solutions containing boehmite sols of different particle sizes and then calcining. The boehmite sols were prepared from an aluminum isopropoxide precursor and heated to $80^{\circ}C$ with high speed stirring for 24 hrs to hydrolyze the precursor. Then the solutions were refluxed at $92^{\circ}C$ for 20 hrs to form a boehmite precipitate. The particle size of the boehmite sols was controlled according to various experimental parameters, such as acid types and acid concentrations. The topmost SiC layer was formed on top of the intermediate $\gamma-Al_2O_3$ by pyrolysis of a SiC precursor, polycarbosilane, in an Ar atmosphere. The resulting amorphous SiC-on-$Al_2O_3$ composite membrane pyrolyzed at $900^{\circ}C$ possessed a high $H_2$ permeability of $3.61\times10^{-7}$ $mol{\cdot}m^{-2}{\cdot}s^{-1}{\cdot}Pa^{-1}$ and the $H_2/CO_2$ selectivity was much higher than the theoretical value of 4.69 in all permeation temperature ranges. Gas permeabilities through a SiC membrane are affected by Knudsen diffusion and a surface diffusion mechanism, which are based on the molecular weight of gas species and movement of adsorbed gas molecules on the surface of the pores.

열화학적 방법에 의한 전극용 나노 Cu/Al2O3 복합분말 합성 (Synthesis of Cu/Al2O3 Nanostructured Composite Powders for Electrode Application by Thermochemical Process)

  • 이동원;배정현;김병기
    • 한국분말재료학회지
    • /
    • 제10권5호
    • /
    • pp.337-343
    • /
    • 2003
  • Nanostructured Cu-$Al_2O_3$ composite powders were synthesized by thermochemical process. The synthesis procedures are 1) preparation of precursor powder by spray drying of solution made from water-soluble copper and aluminum nitrates, 2) air heat treatments to evaporate volatile components in the precursor powder and synthesis of nano-structured CuO + $Al_2O_3$, and 3) CuO reduction by hydrogen into pure Cu. The suggested procedures stimulated the formation of the gamma-$Al_2O_3$, and different alumina formation behaviors appeared with various heat treating temperatures. The mean particle size of the final Cu/$Al_2O_3$ composite powders produced was 20 nm, and the electrical conductivity and hardness in the hot-extruded bulk were competitive with Cu/$Al_2O_3$ composite by the conventional internal oxidation process.

산처리한 γ-알루미나의 표면 산량과 표면 전하밀도 (A Study on the Surface Acid Amount and Surface Charge Density of Acid Treated γ-Alumina)

  • 홍영호;이창우;함영민
    • 공업화학
    • /
    • 제9권3호
    • /
    • pp.377-382
    • /
    • 1998
  • 본 연구는 낮은 활성으로 활용성이 제한된 ${\gamma$-알루미나의 이용을 높이기 위하여 표면을 처리한 알루미나의 계면전기적 특성과 표면활성간의 상관성을 규명하기 위하여 수행되었다. 질산알루미늄을 출발 물질로 하고 암모니아수를 침전제로 사용하여 제조한 알루미나와 황산, 질산, 염산으로 표면 처리한 알루미나를 질량이동법과 site-binding theory를 이용하여 영점전하점을 측정하였다. Amine Titration법과 Hammett 지시약법으로 표면활성점을 구하였다. 전해질에 분산된 알루미나의 계면특성은 전위차적정방법에 의하여 측정된 표면 전하밀도값을 이용하여 분석하였다. 표면전하밀도와 산량의 결과를 이용하여 얻은 ${\gamma$-알루미나의 표면특성과 계면전기적 특성의 상관성은 다음과 같다. 표면을 처리하지 않은 알루미나는 $H_o{\leq}+9.3$인 조건에서 소성온도가 증가함에 따라 산도는 감소한다. 표면처리한 알루미나는 표면을 처리하는 데 사용한 음이온의 농도가 증가하면 표면 이온화상수와 영점전하점은 감소한다. 표면을 처리한 알루미나의 표면전하밀도와 산량은 $H_o{\leq}+4.8$인 조건에서 다음과 같은 상관관계를 갖는다. $SO_4^2-/Al_2O_3:Q_A=-0.172ln(0.0418{\sigma}+1.448)$ $NO_3^-/Al_2O_3:Q_A=-0.024{\sigma}-0.0189$ $Cl^-/Al_2O_3:Q_A=-0.01{\sigma}-0.2006$.

  • PDF

Ag/γ-Al2O3 촉매상에서 탄화수소-SCR(Selective Catalytic Reduction) 연구 (A study of hydrocarbon SCR(selective catalytic reduction) on Ag/γ-Al2O3 catalyst)

  • 김문찬;이철규
    • 분석과학
    • /
    • 제18권2호
    • /
    • pp.139-146
    • /
    • 2005
  • 본 연구에서는 자동차의 배출가스중에 포함된 NO를 비선택적 촉매환원법으로 환원시켜 제거하기 위하여 Ag의 함량을 여러 가지로 달리하여 ${\gamma}-Al_2O_3$에 담지한 촉매를 제조하였고, 제조한 촉매에 대하여 온도, 산소농도, 아황산가스농도의 변화에 따른 $NO_x$의 전환율에 대하여 연구하였다. 또한 제조한 촉매의 물성분석을 통하여 촉매의 상태와 $NO_x$의 전환율과의 관계를 알아보았다. 제조한 각각의 촉매에 대하여 반응조건을 여러 가지로 달리하여 반응실험을 한 결과 $Ag/{\gamma}-Al_2O_3$ 촉매는 Ag의 함량이 2 wt%일 때, 그리고 반응온도가 약 $450^{\circ}C$일 때 가장 높은 $NO_x$ 전환율을 나타냈다. 반응실험 전 후의 촉매에 대하여 X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Temperature Programmed Reduction (TPR), Ultraviolet-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS)등의 분석 결과와 반응실험 결과를 비교하여 볼 때 Ag의 산화상태가 잘 유지되지 못하여 고온에서는 $NO_x$ 전환율이 낮아지는 것으로 나타났다.