• Title/Summary/Keyword: ${\alpha}_s$-method

Search Result 1,356, Processing Time 0.03 seconds

Measurements of the Silica-Silica Interaction Parameter (αF) of the Silane treated Silica Filled Natural Rubber Compound (실란처리된 실리카가 천연고무 복합소재 내에서 실리카 입자간 상호 관계 계수(αF)에 미치는 영향의 비교)

  • Kim, Sung-Min;Choi, Chang-Yong;Jang, Mi-Kyeong;Nah, Jae-Woon;Kim, Kwang-Jea
    • Elastomers and Composites
    • /
    • v.47 no.1
    • /
    • pp.18-22
    • /
    • 2012
  • The silica-silica interaction parameter (${\alpha}_F$) of the silane treated silica filled natural rubber (NR) compound was investigated. The measured ${\alpha}_F$ values using mass fraction method following Wolff's theory were compared with volume fraction method. As silica concentration increased, the ${\alpha}_F$ value increased for both methods. The value of ${\alpha}_F$ expressed as volume fraction was higher than that of mass fraction, which resulted in large gaps between ${\alpha}_F$ values. The effect of accelerator (MBT) concentration on ${\alpha}_F$ values was compared.

Performance of Taiwanese Domestic Equity Funds during Quantitative Easing

  • Tan, Omer Faruk
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.2 no.4
    • /
    • pp.5-11
    • /
    • 2015
  • This study is the first to analyze performance of Taiwanese domestic equity funds between January 2009 and October 2014, the period during which quantitative redirected capital flows toward developing economies and the Taiwanese Stock Exchange Weighted Index compounded at approximately 12.9% annually. Adopting methods endorsed by earlier research, we evaluated 15 Taiwanese equity funds' performance relative to market averages using the Sharpe (1966) and Treynor (1965) ratios and Jensen's alpha method (1968). To test market timing proficiency, we applied the Treynor and Mazuy (1966) and Henriksson and Merton (1981) regression analysis methods. Jensen's alpha method (1968) was used to measure fund managers' stock selection skills. Results revealed that funds significantly under-performed Taiwan's average annual market return and demonstrated no exceptional stock-selection skills and market timing proficiency during the era of quantitative easing.

Overproduction and High Level Secretion of Glucose Oxidase in Saccharomyces cerevisiae (Glucose Oxidase의 Saccharomyces cerevisiae에서의 대량생산 및 고효율 분비)

  • 홍성용;최희경;이영호;백운화;정준기
    • Microbiology and Biotechnology Letters
    • /
    • v.26 no.1
    • /
    • pp.68-75
    • /
    • 1998
  • The overproduction and high level secretion of Glucose Oxidase (GOD) from A. niger in S. cerevisiae was carried out by cloning GOD gene. For this purpose, using two different strong promoters (ADH1 promoter, GAL10 promoter) and signal sequences (${alpha}$-MF signal sequence of S. cerevisiae and ${alpha}$-amylase signal sequence of A. oryzae) and GAL7- and GOD terminator, four expression vectors were constructed. All the expression vectors were transformed in S. cerevisiae 2805 using auxotroph method. By the flask culture, transformants of pGAL expression vector series containing GAL 10 promotor showed much higher GOD productivity than transformants of pADH expression vector series containing ADH1 promoter Transformants of pGALGO2 containing GAL10 promotor and ${alpha}$-amylase signal sequence has shown the best productivity of GOD ($GOD_{total}$: 10.3 unit/mL, $GOD_{ex}$: 8.7 unit/mL) at 115 hr. This value was three fold higher than that of pGALGO1 containing GAL 10 promotor and ${alpha}$-MF signal sequence, even if the same promotor was involved. Through the ${alpha}$-amylase signal sequence of A. oryzae, GOD was secreted much more than the case of ${alpha}$-MF signal sequence from S. cerevisiae. These results suggest that signal sequence may play a important roles in not only the secretion but also the overproduction of foreign protein. Secretion rate of GOD in pGALGO1 and pGALGO2 was 89% and 84%, respectively, Because of the overglycosylation in S. cerevisiae the molecular weight of recombinant GOD in S. cerevisiae was much larger (250 kDa) than that of nature GOD in A. niger (170 kDa).

  • PDF

Cloning of Bacillus amyloliquefaciens amylase gene using YEp 13 as a vector II. Expression of cloned amylase gene in Saccharomyces cerevisiae (YEp 13 vector를 이용한 Bacillus amyloliquefaciens amylase gene의 cloning II. Saccharomyces cerevisiae에서의 발현)

  • 김관필;서정훈
    • Microbiology and Biotechnology Letters
    • /
    • v.14 no.3
    • /
    • pp.209-212
    • /
    • 1986
  • $\alpha$-Amylase gene of Bacillus amyloliquetaciens was cloned on plasmid YEp13, S. cerevisiae-E. coli shuttle vector. Hybrid plasmid pTG17, carrying $\alpha$-amylase gene of B. amyloliquefaciens, was transformed to E. coli and the expression of it in yeast was investigated. This plasmid was unstable in E. coli and produced two minor plasmids, pTG17-1 and PTG17-2, which resulted from the segregation of it. Transformant of S. cerevisiae MC16 with pTG17-1 plasmid was not appeared on SD medium because of the Leu2 gene defection. S. cerevisiae could be transformed by the hybrid plasmid, and $\alpha$-amylase activity of the yeast transformant was detected by somogyi-Nelson method and agar diffusion method.

  • PDF

A Study on Photoelastic Fringe Patterns in Cutting Proces(I) (切削加工 의 光彈性的 現象 에 관한 硏究( I ))

  • 김정두;이용성
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.7 no.2
    • /
    • pp.161-167
    • /
    • 1983
  • In this study the phenomenon of cutting stress which arises on cutting tools and work pieces in cutting process is investigated by rake angle of cutting tools and feed for this measurement, P$_{s}$-1 (high modulus, photolastic Inc.) was used as a cutting tool, P$_{s}$-3 (medium modulus, photolastic Inc.) was used as work piece and reduction apparatus was attached to the head stock, and orthogonal cutting was adapted as a cutting method and transparent glass was used to block the strain in the orientation of thickness. The followings are the results of this study. (1) Photoelastic experimental equipments have made it possible to make dynamic measurement and analyze stress distribution in cutting tool and work piece surface which has hitherto been conducted only in static measurement and analyzing method. (2) The maximum stress arising at tools and work pieces in cutting process is on the tool edge tip, and the maximum stress arising on the tip of cutting tools is equal to that on the contacting area of work pieces in values. (3) The distributions of maximum shear stress on certain parts of the cutting tools and work pieces are as follows; for cutting tools, .alpha.=12.deg., .alpha.=0.deg., .alpha.=-12.deg. in order, and for work pieces, .alpha.=-12.deg., .alpha.=0.deg., .alpha.=12.deg. in opposite order.der.

Spectrophotometric Determination of Copper After Selective Extraction with $\alpha$-(2-Benzimidazolyl)-$\alpha ^{\prime}, \alpha ^{\prime} ^{\prime}$-(N-5-nitro-2-pyridyl hydrazone)-toluene in the Presence of Brij 58

  • 박찬일;김현수;차기원
    • Bulletin of the Korean Chemical Society
    • /
    • v.20 no.3
    • /
    • pp.352-354
    • /
    • 1999
  • The spectrophotometric determination of Cu(Ⅱ) with α-(2-benzimidazolyl)-α',α"-(N-5-nitro-2-pyridylhydrazone)-toluene has been investigated. The optimum conditions of pH, stability, concentration of ligand and surfactant were evaluated. This method is a simple and sensitive method for determination of Cu(Ⅱ) and offers a selective separation of Cu(Ⅱ) from sample solution containin- I ppm below amount of Ni(Ⅱ), Co(Ⅱ), Zn(Ⅱ) and Sn(Ⅱ). Copper was determined by measuring the absorbance of Cu(Ⅱ)-BINPHT complex extracted with benzene in Brij 58 surfactant at 410 nm. Beer's law is obeyed over the concentration range 0∼2.5 μgmL-1 and the detection limit (S/N=2) is 0.06 μgmL-1. The relative standard deviation at the 0.3 μgmL-1 is 2.4% (N=7). The method was applied for the determination of Cu(Ⅱ) in various milks.

The Effects of ALPHA-NUMERIC Brand Name on the Functional Sportswear, for its Suitability, Brand Personality, and Attitude (기능성 스포츠 의류제품의 알파누메릭(Alpha-Numeric) 브랜드 네임이 제품의 적합성, 브랜드 개성 및 태도에 미치는 영향)

  • Suh, Hyun-Suk;Na, Youn-Kue;Sun, Jin-Young
    • Fashion & Textile Research Journal
    • /
    • v.11 no.4
    • /
    • pp.556-565
    • /
    • 2009
  • This study investigates the effect of Alpha-numeric brand name on the product suitability, brand personality, and attitude. To do that we have chosen the functional sportswear, knowing the fact that the Alpha-numeric brand names are not hard to find in this industry. The changes have been made to Alpha-numeric names, such as the usage/non-usage of number, the size of number being used, the writing method, and the different typeface to suit for the study purpose. The results indicate that the Alpha-numeric brand names do have the effect on increasing the fitness for the product's brand. The bigger number and the cursive script will improve the product's suitability. The customers form positive attitude and favorability on the Alpha-numeric brand name compared to the regular brand name in this industry. The contribution of the study is to dig out the distinction of the communicational effects on the customers when the Alpha-numeric brand names take on the different forms. Therefore the current study enlights the practical value of Alpha-numeric brand name as part of the branding strategy.

The Estimation Method and Application of UV-cut effect in Lens (렌즈에서 UV 차단효과의 평가방법 및 적용)

  • Kim, Yong-Geun
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.6 no.1
    • /
    • pp.107-110
    • /
    • 2001
  • In order to estimate the UV-A line's cut efficiency it lens, it was measured the light transmittance in the 320~400nm wavelength regions. We obtained the area to integrate the light transmittance of standard CR-39 and sample in the 320~400nm wavelength regions and established ${\alpha}$, ${\beta}$ of UV-A line's cut efficiency by contrast its area. We obtained the absolute cut efficiency ${\alpha}$ CR=0.59 value of CR-39 Lens, and if ${\alpha}$ was the absolute cut efficiency value of the lens to estimate UV-A cut effect, the relative cut efficiency ${\beta}$ was $1.69{\alpha}$. It was obtained the absolute and the relative UV exclusion index through each $a=(1-{\alpha}){\times}100%$, $b=(1-{\beta}){\times}100%$.

  • PDF

The Photoluminescence(PL) Spectroscopy and the Photo-Darkening(PD) Effect of the Amorphous SeGe Thin Films (비정질 SeGe 박막의 PL 특성과 광흑화 효과에 관한 연구)

  • 김진우;이현용;정홍배
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.15 no.5
    • /
    • pp.435-440
    • /
    • 2002
  • In this study, we have investigated photo-induced changes of optical energy gap( $E_{OP)}$ and photoluminescence (PL) in amorphous ($\alpha$-) S $e_{100-x}$G $e_{x}$ (x=5, 25 and 33) thin films prepared by conventional thermal evaporation method. In the $\alpha$-S $e_{100-x}$G $e_{x}$ thin film, the $E_{OP}$ is obtained by a linear extrapolation of the ($\alpha$hν)$^{\frac{1}{2}}$ versus hν plot to the energy axis using the optical absorption coefficient ($\alpha$) calculated from the extinction coefficient k measured in the wavelength range of 290~900nm. Although the values of $\Delta$ $E_{OP}$ are very different, all films exhibit photo-induced photo-darkening (PD) effect that is a red shift of $E_{OP}$ . In particular, $\Delta$ $E_{OP}$ in $\alpha$-S $e_{75}$ G $e_{25}$ thin film exhibits the largest value (i, e., $\Delta$ $E^{OP}$ ~40meV for $\alpha$-S $e_{95}$ G $e_{5}$ , $\Delta$ $E_{OP}$ ~200meV for $\alpha$-S $e_{75}$ G $e_{25}$ , $\Delta$ $E_{OP}$ ~130meV for $\alpha$-S $e_{67}$ G $e_{33}$ ). PL spectra in $\alpha$-SeGe by hν$_{HeCd}$ have no-Stokes shift (SS) and show a tendency dependent on both composition and illumination time. We explain the energy-induced phenomena such as the PD and thermal bleaching, the native charged-defect generation and the no-SS PL, etc..the PD and thermal bleaching, the native charged-defect generation and the no-SS PL, etc..tc..

Cloning of Bacillus amyloliquefaciens amylase gene using YRp7 as a vector I. Expression of cloned amylase gene in Escherichia coli (YRp 7 vector를 이용한 Bacillus amyloliquefaciens amylase gene의 cloning I. Escherichia coli에서의 발현)

  • 서정훈;김영호;전도연;홍순덕;조윤래
    • Microbiology and Biotechnology Letters
    • /
    • v.14 no.2
    • /
    • pp.161-168
    • /
    • 1986
  • A 1.95Kb Sau3Al fragment coding for $\alpha$-amylase from Bacillus amyloliquefaciens was isolated by the shotgun method using Escherichia coli as a host. The genome of Bacillus amyloliquefaciens was partially digested with the restriction endonuclease Sau3Al and joined to plasmid YRp7 cleaved with the restriction endonuclease BamHI. The $\alpha$-amylase gene present in a 1.95Kb insert was stably maintained and expressed in Escherichia coli. The amount of $\alpha$-amylase activity produced by Escherichia coli containing the hybrid plasmid pEA24 was about 65% of the activity produced by the donor Bacillus amyloliquefaciens strain. The properties of $\alpha$-amylase produced by Escherichia coli were very similar to those produced by Bacillus amyloliquefaciens as based on optimum temperature, pH, and effect of CaCl$_2$ concentration. About 70% of the $\alpha$-amylase produced by Escherichia coli was localized in the periplasmic space, whereas the remaining enzyme was localized in the inner part of the cell.

  • PDF