• 펄프종이기술
• /
• 제44권3호
• /
• pp.79-85
• /
• 2012

In this study, purified cellulose was prepared from rice husk which is one of the major agricultural residues in Korea. The various bleaching processes such as ozone bleaching, $ClO_2$ bleaching and $H_2O_2$ bleaching were applied to remove residual lignin and impurities. In order to increase the contents of ${\alpha}$-cellulose contents, the effects of acid and alkali treatments were evaluated. Although the multi stages of the bleaching processes resulted in less than 0.5 % residual lignin contents, the application of ozone leaded to the decrease in DP(degree in Polymerization) and ${\alpha}$-cellulose contents. The alkali treatment after bleaching processes resulted in pure cellulose which showed more than 98% of ${\alpha}$-cellulose contents.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.27-33
• /
• 2013

Manufacturing fabrics from dissolving cellulosic pulp is increasing in these days. For making high quality of cellulose-based fabrics, control of cellulose DP (degree of polymerization), its alpha cellulose content, its brightness, and its crystallinity are important. To process the cellulosic raw material, refining of cellulosic fibers is essential, and it is important to know if refining affects those important cellulose properties. The effects of PFI mill and Valley beater refining on the alpha-cellulose content, cellulose DP, crystallinity, and paper mechanical properties of wood and two different cotton fibers were studied. The results showed that PFI mill refining rarely affected those properties. Fibers refined by a Valley beater displayed a small reduction in fiber length in comparison with those refined by a PFI mill. However, the Valley beater refining method produced almost no changes in cellulose properties, either. The refining process seemed to have very little effect on the cellulose DP, crystallinity index, or alpha-cellulose content until the freeness decreased to around 300 mL CSF for wood and 100 mL CSF for cotton fibers, respectively. There were also no differences in tensile strength development in two refining methods.

• 동아시아식생활학회지
• /
• 제9권1호
• /
• pp.27-34
• /
• 1999

This study was carried out to investigate the effects of the kinds and the amounts of dietary fiber on serum lipid composition in rats. Seventy-two male Sprague-Dawley rats weighting 160$\pm$10g were fed diets containing 1.0%, 3.6%, 6.0% and 10.0% $\alpha$-cellulose, pectin and alginic acid fer 4 weeks. Daily food intake of experimental groups was significantly higher in the u-cellulose 10.0% group than in the other groups. Increasing the dietary fiber level decreased the food efficiency ratio of the $\alpha$-cellulose, pectin and alginic acid groups. Serum triglyceride concentration was significantly lower in the rats fed the alginic acid diet. Serum total cholesterol concentration showed no significant difference in the kind and the amount of three dietary fibers. Serum HDL-cholesterol concentration was higher in $\alpha$-cellulose and pectin diet. HDL-cholesterol/total cholesterol ratio was higher in u-cellulose and pectin diet than alginic acid diet. In conclusion, alginic acid is good for the serum triglyceride decrease, pectin is good for HDL-cholesterol increase, $\alpha$-cellulose and alginic acid are good for HDL-cholesterol/total cholesterol ratio increase. But the different effects according to the dietary fiber's contents did not show a significant trend.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.428-433
• /
• 2009

Cellulose triacetate (CTA) was prepared from cotton linter and pulps which contain various contents of $\alpha$-cellulose. CTA which contains 2.8 of degree of substitution (DS) and 222 of degree of polymerization (DP) was obtained from V-81 pulp under the heterogeneous system. The DS was measured by the titration method, and the DP was obtained by measurement of viscosity. FT-IR spectometer (FT-IR 6300, JASCO) was used to analyze the chemical structure of raw materials and cellulose triacetate, and X-ray diffractometer (X-pert MPD PW3040, Philips) was used to confirm the crystal structure and to calculate the relative crystallinity index (RCI). As $\alpha$-cellulose content in pulp increased, the acetylation yield increased. Besides with a kind of pulp, it contains insoluble residue which was mainly formed due to the formation of glucomannan triacetate and xylan diacetate during the esterification.

• Journal of Nutrition and Health
• /
• 제28권2호
• /
• pp.107-114
• /
• 1995

These works were designed to examine the effects of dietary fiber sources and levels on lipid metabolism in rats fed high lard diet. Rats were divided into three($\alpha$-cellulose, polydextrose, carrageenan) groups and were fed with containing 6% fiber diet. Serum, liver and fecal lipid contents were examined after four weeks of dieting. Also, in order to investigate whether hypocholesterolemic effect of dietary fiber at 4 weeks is continued at 8 weeks, rats were fed with diets containing same sources with different levels of each dietary fiber and were sacrificed after eight weeks of dieting. Serum cholesterol in rats fed carrageenan diet and polydextrose diet were reduced compared with $\alpha$-cellulose-fed group at both four and eight weeks dieting. Liver cholesterol in both polydextrose-fed and carrageenan-fed group were lower than $\alpha$-cellulose-fed group. Fecal total group were increased compared with $\alpha$-cellulose-fed group. On the other hand, there was no significant difference between polydextrose-fed and carrageenan-fed group. On the basis of the results, it was suggested that the hypocholesterolemic effect of soluble fiber used in this study (polydextrose, carageenan) on rats was due to the inhibition of cholesterol absorption on the intestinal lumen and acceleration of cholesterol catabolism in the liver and enhancement of bile acids excretion. On the other hand, insoluble fiber($\alpha$-cellulose) showed no hypo-cholesterolemic effect.

• 펄프종이기술
• /
• 제45권3호
• /
• pp.27-35
• /
• 2013

Cotton linter pre-treatment methods using electron beam and sulfuric acid were investigated to prepare high quality regenerated fibers for fabrics. So far, NaOH was used to reduce the degree of polymerization (DP) of the cotton linter for ease of dissolving by cellulose solvent. Two pre-treatment methods were developed to reduce the consumption of the chemicals (NaOH) and to control the DP of cellulose more precisely. Changes in ${\alpha}$-cellulose contents and brightness by the pre-treatments were also important concerns. Both electron beam irradiation and sulfuric acid were shown to be effective on controlling the DP of cellulose and to reduce the chemical consumption, but reduced ${\alpha}$-cellulose contents as well in this study. Sulfuric acid pre-treatment, which needed additional washing process after the pre-treatment when comparing to the electron beam irradiation method, gave the highest brightness and the highest reduction of ${\alpha}$-cellulose content.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.508-514
• /
• 2010

Regenerated cellulose fibers were prepared from three pulps containing different degree of polymerization(DP) and $\alpha$-cellulose contents by dry-jet wet spinning technique with cellulose dope in N-methylmorpholin N-oxide (NMMO). The effect of antioxidant, n-propyl gallate (PG) on the properties of different regenerated celluloses was studied using X-ray diffraction, copper number calculation, and viscometry. The degradaqtion of regenerated cellulose from pulp containing higher DP and lower $\alpha$-cellulose content was occurred more seriously. The tensile strength and initial modulus of regenerated cellulose fiber obtained from NMMO dope with PG were higher than those of fiber obtained from NMMO dope without PG. All fibers showed the round shape cross section and typical cellulose II crystalline structure.

• Journal of the Korean Wood Science and Technology
• /
• 제20권2호
• /
• pp.81-90
• /
• 1992

The effect of acid treatment of cellulose on the substitution charateristics of carboxymethylation was studied in this paper. Five samples of hydrocellulose(HC), all prepared from ${\alpha}$-cellulose by hydrolysis with five reaction times and determined on average molecular weight and polydispersity, were carboxymethylated to carboxymethyl cellulose (CMC). The CMCs from HCs were examined upon degree of substitution(DS), distribution of carboxymethyl groups in anhydroglucose units of the cellulose, and unsubstituted anhydroglucose(USAG) content. The DS of CMCs increased with increasing the hydrolysis time except CMC from HC at 1 hour hydrolysis time. In carboxymethylation the availability of hydroxyl groups on anhydroglucose units in HCs was the highest on OH(2), and the relative availability of OH(6) increased with the increasing of the hydrolysis time. The USAG contents were more deviated than that calculated based on Spurlin's model, and had a strong tendency of decreasing with increasing the hydrolysis time. The reactivity of HC was lower than that of ${\alpha}$-cellulose and the relative availability of OH(6) in HC increased with the hydrolysis time.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.37-43
• /
• 2014

The crystallinity and molecular weight of cotton linter need to be controlled to be more easily dissolved in NMMO during manufacture of clothing fabrics. Electron beam irradiation and sulfuric acid treatment were used as pre-treatment to reduce molecular weight of cotton linter more efficiently, and after the pre-treatment, peroxide bleaching was followed in alkaline condition. After those processes, the crystalline indices of the cotton linters were measured by XRD method, and other properties such as their alpha cellulose contents and degree of polymerization were measured. It was found that the crystallinity index of cotton linter was decreased as the irradiation of electron beam increased while increased as the dose of sulfuric acid increased. These results strongly suggested that electron beam damaged the crystalline structure of the cellulose directly while sulfuric acid dissolved mostly non-crystalline area of the cellulose structure.

• Journal of Nutrition and Health
• /
• 제32권3호
• /
• pp.230-238
• /
• 1999

The present study was conducted to investigate te effect of sea tangle and hypoglycemic agent(Metformin) on lipid peroxidation and antioxidants levels in normal and diabetic rats. Male Sprague-Dawley rats were fed AIN-76 based experimental diets containing 5% (w/w) cellulose or 15%(w/w) sea tangle for 3 weeks, and then rats of diabetic groups were rendered diabetic by intramuscular injection of streptozotocin(STZ, 45mg/kg BW). After induction of diabetes Metformin(350mg/kg BW) was given once a day using a feeding tube for 5 days. Blood glucose level in diabetic rats fed sea tangle was significantly lower than that of diabetic rats fed cellulose. Metformin feeding resulted in further lowering blood glucose. Plasma and liver microsomal levels of lipid peroxides were increased significantly in diabetic rats as compared to normal rats, and the plasma level tended to be decreased by sea tangle feeding. Plasma level of retinol was reduced by STZ treatment, but it was increased by Metformin feeding in diabetic rats fed sea tangle. The liver contents of retinyl plamitate were reduced in diabetic rats but recovered by sea tangle feeding to some extent. Liver contents of total vitamin A were increased significantly by sea tangle in diabetic rats. Although difference in either plasma or liver level of $\alpha$-tocopherol by diet and STZ treatment was not significant, $\alpha$-tocopherol levels were the highest in the group with simultaneous feeding of sea tangle and metformin. Liver contents of zinc and copper were not influenced by either STZ treatment or sea tangle feeding. The present study indicates that the lowering blood glucose level could be attained by simultaneous trial of sea tangle diet and hypoglycemic agent and the increased oxidative stress caused by STZz treatment could be relieved by sea tangle feeding.