• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.658-664
• /
• 1997

자기질 도자기 소지조성에 필수적으로 함유되는 부산화물들($K_2O, MgO, CaO,Al_2O_3$, 그리고 $TiO_2$)이 순수한 $SiO_2$의 상형태에 미치는 영향을 조사하였다. 또한 장석, 도석, 카올린, 그리고 점토를 이용하여 조합된 자기질 도자기 소지 조성에서 $SiO_2/Al_2O_3$의 비를 조정하여 안정화된 $\beta$-cristobalite 상을 갖는 도자기 소지 조성을 개발하였으며, 여기에 첨가된 부산화물들이 $SiO_2$의 상형태에 미치는 영향을 조사하였다. $SiO_2$에 $K_2$O와 MgO를 첨가할 경우 준안정한 주상은 $\alpha$-cristobalite, CaO와 $Al_2$O$_3$를 첨가할 경우 $\alpha$-quartz, 그리고 $TiO_2$를 첨가할 경우는 비정질상이었다. 장석, 도석, 카올린, 그리고 점토를 사용하여 조합한 도자기 소지에서 $SiO_2/Al_2O_3$비가 작아질 수록 $\beta$-cristobalite 상의 안정화가 촉진되었으며, $\beta$-cristobalite 상이 안정화되는 임계의 $SiO_2/Al_2O_3$의 비는 68.10/22.75이었다. Cristobalite 상이 안정화된 실용 도자기 조성에 부산화물들이 첨가될 경우 $\alpha$, $\beta$-cristobalite 상생성이 억제되었다.

• 천문학회보
• /
• 제42권1호
• /
• pp.33.2-33.2
• /
• 2017

Symbiotic stars and quasars show strong far UV resonance doublets including O VI 1032 and 1038, which are known to be major coolants of astrophysical plasma with high temperature T > $10^5K$. We investigate the transfer of $H{\alpha}$ and $Ly{\beta}$ in an emission nebula of temperature T ~ $10^5$, where n=2 population is significant. Line photons of $H{\alpha}$ and $Ly{\beta}$ are transferred in the medium through spatial and frequency diffusion altering their identity according to the branching ratios. We adopt a Monte Carlo technique to describe the transfer of $H{\alpha}$ and $Ly{\beta}$ in an emission nebula with a uniform density and a simple geometrical figure. We find that the temperature of the emission nebula is the major controlling parameter to produce a nonnegligible flux of $Ly{\beta}$. In particular, when T exceeds $10^5K$ the number flux ratio may reach ~ 25% with line center optical depth of a few. We discuss the formation of broad $H{\alpha}$ wings from Raman scattering of $Ly{\beta}$ emergent from a hot emission nebula.

• 농약과학회지
• /
• 제16권2호
• /
• pp.145-150
• /
• 2012

고춧가루에 잔류되어 검출 빈도가 높은 농약인 Endosulfan(${\alpha}$-, ${\beta}$-체) Cypermethrin, Fenitrothion, Hexaconazole, EPN을 고춧가루에 인위적으로 오염시킨 뒤 365, 254 nm 파장에서 조사거리와 조사시간을 달리하여 잔존률을 조사하여 자외선 조사로 인한 농약의 제거효과를 알아보았다. 365 nm의 경우 조사거리 20 cm, 조사시간이 5분일 때 ${\alpha}$-Endosulfan 73.4%, ${\beta}$-Endosulfan 69.6%, Cypermethrin 60.8%, Fenitrothion 92.7%, Hexaconazole 73.8%, EPN 90.5%의 잔존률을 나타내었으며, 254 nm의 경우 조사거리 5 cm, 조사시간 36시간 일 때 ${\alpha}$-Endosulfan 74.6%, ${\beta}$-Endosulfan 64.5%, Cypermethrin 71.1%, Fenitrothion 79.1%, Hexaconazole 79.4%, EPN 64.7%의 잔존률을 나타냈다.

• 대한치과기공학회지
• /
• 제19권1호
• /
• pp.43-54
• /
• 1997

This investigation is carried out of inqurie into the effects of the accelerator on the setting time and haedness when it is used with plaster products. Plaster($\beta$), dental hard stone($\alpha$), and limproved dental hard stone($M{\alpha}$) are selected as the objects of the investigation, since they are most common materials for dental plaster products. Setting time is gauged by means of Vicket Needle and Gilmore Needle, and hardness is gauged by means of Brinell and Vicket Hardness machines. Samples of each material are made in the standerd water powder ratio and with the accelerator repectively, Every material is tested five times each. The results of the tests are as fallow : 1) In each case the setting time is shortened when the accelerator is used. 2) Of the three materials the hardness of the plaster was lowest A($\beta$) < B($\alpha$) < C($M{\alpha}$)} 3) In each case the hardness of the samples made in the standard water powder ratio were higher than that of the sample made with the accelerator. A1 > A2 ; B1>B2 ; C1>C2 4) Final Conclusion : Higher quality cast is expected when it is made in the standard water powder ratio.

• International Journal of Reliability and Applications
• /
• 제2권4호
• /
• pp.263-268
• /
• 2001

Shanmugam(1991) generalized the Poisson distribution to capture a restriction on the incidence rate $\theta$ (i.e. $\theta$ ＜ $\beta$, an unknown upper limit), and named it incidence rate restricted Poisson (IRRP) distribution. Using Neyman's C($\alpha$) concept, Shanmugam then devised a hypothesis testing procedure for $\beta$ when $\theta$ remains unknown nuisance parameter. Shanmugam's C ($\alpha$) based .results involve inverse moments which are not easy tools, This article presents an alternate testing procedure based on likelihood ratio concept. It turns out that likelihood ratio test statistic offers more power than the C($\alpha$) test statistic. Numerical examples are included.

• 한국주조공학회지
• /
• 제33권6호
• /
• pp.233-241
• /
• 2013

Effect of Fe and Mn contents on the castability of Al-9wt%Si-xMg-yFe-zMn alloy has been studied. The alloy was composed of ${\alpha}$-Al phase, Al+eutectic Si phase, ${\beta}$-Al5FeSi compound and chinese script ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compound. ${\beta}$-$Al_5FeSi$ and ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compounds assumed to effect the fluidity and shrinkage behaviors of the alloy during solidification due to the crystallization of ${\alpha}$-$Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}$-$Al_5FeSi$ compounds above eutectic temperature. As Fe and Mn contents of Al-9wt%Si-0.3wt%Mg system alloy increased from 0.15wt% to 0.6wt% and from 0.3wt% to 0.7wt%, fluidity of the alloy decreased by 5.7% and 3.3%, respectively. And as Mg content of Al-9wt%Si-0.45wt%Fe-0.5wt%Mn system alloy increased from 0.3wt% to 0.4wt%, fluidity of the alloy decreased by 8.6%. When Fe content of the alloy increased from 0.15wt% to 0.6wt%, macro shrinkage ratio decreased from 6.1% to 4.1%, and micro shrinkage ratio increased from 0.04% to 0.24%. Similarly, Mn content of the alloy increased from 0.3wt% to 0.7wt%, macro shrinkage ratio decreased from 6.0% to 4.5% and micro shrinkage ratio increased from 0.12% to 0.18%. Judging from the castability of the alloy, Al-9wt%Si-0.3wt%Mg alloy with low content of Fe and Mn, 0.1wt% Fe and 0.3wt% Mn, is recommendable.

• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.37-47
• /
• 2006

도시화로 인한 유출량의 증가 및 도달시간의 단축은 도시재해의 한 원인이 되고 있다. 이를 막기 위하여 도시 배수유역내에 저류지를 설치하여 하수관거의 통수능 이하로 방류량을 조절하는 방안을 고려할 수 있다. 기초계획 단계에서의 저류지 설계를 위해서는 복잡한 연관성을 지니고 있는 제반 변수를 고려하지 않고 대표적인 관련 주요변수를 택하여 저류용량을 결정하는 여러 가지 저류지 계획모형이 이용되고 있다, 기왕의 저류지 계획모형에서는 주로 도시화 특성인자인 첨두유량비$(\alpha)$와 도달시간비$(\gamma)$를 활용하고 있다. 본 연구에서는 재해영향평가서 22개소의 저류지를 분석대상으로 하여 도시화에 따른 도시배수유역 특성인자와 저류지 특성인자간의 분석을 통해 저류지의 계획단계에서 활용할 수 있도록 편의성을 도모하고자 한다. 첨두유량비 $\alpha$가 도달시간비 $\gamma$보다 저류 용량에 미치는 영향이 더욱 민감함을 알 수 있었으며, 개발전 후의 유출계수비 $\beta$가 설계강우강도의 지역계수 n값 보다 $\alpha$에 미치는 영향이 작음을 알 수 있었다. 사다리꼴 설계수문곡선을 사용하는 경우에는 강우지속기간이 저류비에 미치는 영향이 큰 것을 알 수 있었다.

• 한국주조공학회지
• /
• 제33권3호
• /
• pp.103-112
• /
• 2013

Effect of Fe and Mn contents on the tensile properties of Al-4 wt%Mg-0.9 wt%Si alloy system has been studied. Common phases of Al-4 wt%Mg-0.9 wt%Si alloy system were ${\alpha}$-Al, $Mg_2Si$, ${\alpha}-Al_{12}(Fe,Mn)_3Si$ and ${\beta}-Al_5FeSi$. As Fe content of Al-4 wt%Mg-0.9 wt%Si alloy system increased from 0.15 wt% to above 0.3 wt%, ${\beta}-Al_5FeSi$ compound appeared. When Mn content of the alloy increased from 0.3 wt% to 0.5 wt%, morphology of plate shaped ${\beta}-Al_5FeSi$ compound changed to chinese script ${\alpha}-Al_{12}(Fe,Mn)_3Si$. As Fe content of Al-4 wt%Mg-0.9 wt%Si-0.3 wt%Mn alloy increased from 0.15 wt% to 0.4 wt%, tensile strength of the as-cast alloy decreased from 191 MPa to 183 MPa and, elongation of the alloy also decreased from 8.0% to 6.2%. Decrease of these properties can be explained as the formation of plate shape, ${\beta}-Al_5FeSi$ phase with low Mn/Fe ratio of the alloy. However, when Mn content of Al-4 wt%Mg-0.9 wt%Si-0.3 wt%Fe alloy increased from 0.3 wt% to 0.5 wt%, tensile strength of as-cast alloy increased from 181 MPa to 194 MPa and, elongation of the alloy increased from 6.8% to 7.0%. These improvements attribute to the morphology change from ${\beta}-Al_5FeSi$ phase to chinese script, ${\alpha}-Al_{15}(Fe,Mn)_3Si_2$ phase shape-modified from with high Mn/Fe ratio of the alloy.

• 한국주조공학회지
• /
• 제25권3호
• /
• pp.128-133
• /
• 2005

The effects of Mn and Cr on the crystallization behaviors of Fe-bearing intennetallics in A356 alloy were studied. Coarse and acicular ${\beta}-Al_{5}$FeSi phase in A356-0.20wt.%Fe alloy was modified into small ${\alpha}$-Al(Fe,Mn)Si and ${\alpha}$-Al(Fe,Cr)Si phases in response to Mn and Cr addition, respectively. Increasing of Mn addition amount elevates the crystallizing temperature of ${\alpha}$-Al(Fe,Mn)Si and the Mn/Fe ratio in the ${\alpha}$-Al(Fe,Mn)Si. Cr is more effective to modify ${\beta}-Al_{5}$FeSi in comparison with Mn. ${\alpha}$-Al(Fe,Mn)Si phase had BCC/SC dual structure.

• 대한수의학회지
• /
• 제31권1호
• /
• pp.99-108
• /
• 1991

To observe the changes of serum proteins according to the process of Babesia gibsoni(B gibsoni) infection, the babesia protozoa($10^8/kg$) were inoculated into the cephalic vein of healthy dogs. The serum proteins of experimentally infected dogs were separated by using cellulose acetate electrophoresis. The results obtained were as follows; 1. Cellulose acetate electrophoresis was fractionated to total 6 of bands such as, albumin, ${\alpha}_1$, ${\alpha}_2$, ${\beta}_1$, ${\beta}_2$ and $\gamma$-globulin. 2. The concentration of total protein was shown a decreasing tendency after B gibsoni infection. Albumin and A/G ratio were lowered through all periods of the infection, but they were not significant changes. 3. The level of ${\alpha}_1$-globulin was significantly(p<0.05) incresed in early stage of the infection. 4. The levels of ${\alpha}_2$ and total $\alpha$-globulin were shown highly significant decreases (p<0.01) through all periods of the infection. 5. The levels of ${\beta}_1$ and total $\beta$-globulin had highly significant changes (p<0.01) that was increased in early stage of infection and decreased later. 6. The level of $\gamma$-globulin was seen to be constantly increased through all periods of infection. It was a highly significant change (p<0.01). 7. Plasma protein: fibrinogen (PP:F) ratio was shown a temporally significant increase (p<0.05) following the decrease in early infection.