• 마이크로전자및패키징학회지
• /
• 제10권3호
• /
• pp.1-7
• /
• 2003

잉크젯 헤드의 발열체에 적용하기 위해 $poly-Si/SiO_2/Si$ 다층기판 위에 결정화된 안정한 코발트실리사이드$(CoSi_2)$ 박막을 형성하여 오메가 형태의 발열체를 제작하고 발열체의 구조적 형상과 온도저항계수 등 전기적 특성을 조사, 연구하였다 $(CoSi_2)$ 박막의 형성은 금속 Co 박막을 급속 열처리장치를 이용하여 $800^{\circ}C$에서 20초 동안 질소 분위기에서 열처리하여 실리사이드 박막을 형성하였다. 발열체의 온도 저항계수 값은 약 $0.0014/^{\circ}C$ 값을 얻을 수 있었다. 인가전압 10 V, 주파수 10KHz 및 펄스간격 $1{\mu}s$ 인가시 발열체의 순간전력은 최대 2W를 나타내었다. 반복된 전압인가에 따른 발열체의 피로특성을 조사한 결과 15 V 이하의 전압인가시 $10^8$ 펄스 cycle 까지 저항변화가 거의 없었으나 17 V 인가전압에서는 $10^6$ cycle에서 발열체의 저항이 급격히 증가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.241.2-241.2
• /
• 2014

We present highly transparent liquid crystal displays (LCDs) using hybrid films based on carbon nanomaterials, metal grid, and indium-tin-oxide (ITO) grid. Carbon based nanomaterials are used as transparent electrodes because of high transmittance. Despite of their high transmittance they have relatively high sheet resistance. To solve this problem, we applied grid and made hybrid conductive films based on carbon nanomaterials. Conventional photolithography processes were used to make a grid pattern of metal and ITO. To fabricate transparent conductive films, carbon nanotube (CNT) ink was spin coated on the grid pattern. The transparency of the conductive film was controlled by shape and size of the grid pattern and the thickness of CNT films. The optical transmittance of CNT-based hybrid films is 92.2% and sheet resistance is also reduced to $168{\Omega}/square$. These substrates were used for the fabrication of typical twisted nematic (TN) LCD cells. From the characteristics of LCD devices such as transmittance, operating voltage, voltage holding ratio our devices were comparable to those of pristine ITO substrates. The result shows that the hybrid conductive films based on carbon nanomaterials could be alternative of ITO for the highly transparent LCDs.

• Journal of Biosystems Engineering
• /
• 제25권6호
• /
• pp.457-462
• /
• 2000

Boom sprayers have been known by their excellency in field efficiency worker’s safety and pest control efficacy. The boom sprayer in Korea that was developed for paddy field is not suitable for upland field of which shape is irregular and inclination is steep, due to heavy chemical tank long boom width and manual on-off control of spraying. The goal of the study was to develope a boom control system that could control boom angles of left and right boom automatically and independently corresponding to local field slope. The prime mover was selected as a cultivating tractor. Main results of this study were as follows. 1. Ultrasonic sensor whose response time was 0.1s and response angle was within $\pm$20$^{\circ}$was selected to measure distance. Voltage output of the sensor(X, Volt) had a highly significant linear relationship with the vertical distance between the sensor and ground surface(Y, mm) as follows; Y=0.0036X-0.437 2. Left and right section of the boom could be folded up by a position control device(on-off control) which could control the left and right boom independently corresponding to local slope by equalizing distances between the sensor and boom at the center and left/right boom. Most reliable DB(dead band) was experimentally selected to be 75$\Omega$(6cm). 3. At traveling velocity of 0.3~0.5m/s RMS of error between desired and achieved height was less than 4.5cm The developed boom angle controller and boom linkage system were evaluated to be successful in achieving the height control accuracy target of $\pm$10cm.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.29-37
• /
• 2011

The modal characteristics of a compressor wheel of an automotive turbocharger have been investigated using an experimental method based on an acoustic frequency response function, p/f(${\omega}$), where p is sound pressure radiated from a structure, and f is impact force. First, a well-defined annular disc with narrow radial slots was examined to check whether the vibro-acoustic test could precisely determine natural quencies and vibration modes of structures showing that the vibro-acoustic test proposed in this paper was comparable to the conventional modal test with an accelerometer and the numerical analysis. The conventional method has been found to be inappropriate for compressor wheel because of additional mass due to the accelerometer and additional damping from the accelerometer cable alter the dynamic responses of the wheel blades. odal characteristics of the wheel have been defined using vibro-acoustic test and verified with the results from another conventional method using a laser vibrometer. Natural quencies and mode shapes of a turbocharger wheel, which can't be precisely obtained with onventional method, could be defined accurately without the additional effects from sensor and cable. Proposed method can be applied to small structures where conventional sensors and cables could generate troubles.

• 한국재료학회지
• /
• 제19권5호
• /
• pp.245-252
• /
• 2009

Changes in the surface morphology and light scattering of textured Al doped ZnO thin films on glass substrates prepared by rf magnetron sputtering were investigated. As-deposited ZnO:Al films show a high transmittance of above 80% in the visible range and a low electrical resistivity of $4.5{\times}10^{-4}{\Omega}{\cdot}cm$. The surface morphology of textured ZnO:Al films are closely dependent on the deposition parameters of heater temperature, working pressure, and etching time in the etching process. The optimized surface morphology with a crater shape is obtained at a heater temperature of $350^{\circ}C$, working pressure of 0.5 mtorr, and etching time of 45 seconds. The optical properties of light transmittance, haze, and angular distribution function (ADF) are significantly affected by the resulting surface morphologies of textured films. The film surfaces, having uniformly size-distributed craters, represent good light scattering properties of high haze and ADF values. Compared with commercial Asahi U ($SnO_2$:F) substrates, the suitability of textured ZnO:Al films as front electrode material for amorphous silicon thin film solar cells is also estimated with respect to electrical and optical properties.

• 한국추진공학회지
• /
• 제6권2호
• /
• pp.1-7
• /
• 2002

추진기관은 노즐을 통해 추력을 발생하며 축소-확대 형상의 초음속 노즐에서는 노즐의 설계 팽창비가 내부 유동의 전압력과 배압의 압력비보다 매우 클 때 충격파의 발생과 함께 경계층 박리를 유발한다. 노즐 내부에서의 충격파 발생과 유동의 박리는 주어진 유동의 압력비에 가장 적합한 노즐형상을 구현하는 것으로 실제의 구조적 노즐의 형상보다 짧은 노즐에서 나타나는 유동과 같은 현상을 보인다. 수치 해석적 방법으로 고정된 형상의 2차원 노즐 내부의 충격파와 경계층 박리 현상에 관한 연구를 수행하였고 Hunter가 행한 실험적 연구와 비교하였다. 수치해석은 TVD 기법을 이용한 압축성 유체 해석 코드와 SST 2방정식 난류 모델을 이용하여 수행되었다. 낮은 압력비에서의 충격파와 경계층과의 상호작용에 의한 $\lambda$형태의 충격파 시스템을 잘 보여주고 있고 추력 값의 비교를 통해 고정된 형상의 노즐을 이용하여 필요한 운용범위를 충족할 수 있음을 알 수 있었다.

• 한국자기학회지
• /
• 제8권4호
• /
• pp.241-248
• /
• 1998

본 연구에서는 micro magnetic device의 제작과 특성 분석을 위하여 고주파수 대역에서 사용가능한 자성체의 개발과 meander형 마이크로 코일의 가공 기술 확립에 그 목적을 두었다. 자성체로서는 DC magnetron reactive sputtering system에 의해 제조된 초 미세결정구조를 갖는 FeTaC, FeTaN막을 사용하였으며, 그 자기적 특성은 다음과 같다. Bs:13~17kG, Hc:0.1~0.2Oe, $\mu$':2000~4000. 전기 도금법에 의해 제작된 Cu코일은 2$\mu$$\Omega$-cm의 비저항을 나타내었으며, 공심형 5turn 언덕터의 경우에는 50nH의 인덕턴스와 700MHz의 공진 주파수 그리고 200MHz에서 30의 성능 지수를 보였다. 또한 meandergudxo의 폐자로 인덕터에서 인덕턴스는 150nH, 공진 주파수는 100MHz, 그리고 성능지수는 10~30 MHz에서 4의 값을 나타내었다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권3호
• /
• pp.70-74
• /
• 2001

Admittance or impedance spectroscopy is one of the powerful tools to study dielectric relaxation and loss processes in organic and inorganic materials. In this study, the frequency dependent properties of an indium tin oxide/tris(8-hydroxyquinoline) aluminum($Alq_3$)/aluminum structure have been studied. The conductance of the $Alq_3$ film increases with the DC applied voltage up to 4V and decreases above 4V in the low frequency region. This indicates that the resistance of the device decreases with the applied bias due to the carrier injection enhancement, thereafter the injected carriers form the space charge and the additional injection of carriers is prevented. The Cole-Cole plot of the admittance takes a one-semicircle shape, which means that the device can be modeled as a parallel resistor-capacitor network. The resistance and capacitance were estimated as 8.62k${\Omega}$ and 2.7nF, respectively, at 3V in the low frequency region. The dielectric constant ( ${\epsilon}'$ ) of the $Alq_3$ film is independent of the frequency in the low frequency region below 100kHz, while the frequency dependency was observed at above 100kHz. The dielectric loss factor ( ${\epsilon}"$ ) of the $Alq_3$ film shows the dielectric dispersion below 100kHz and dielectric absorption in higher frequency domain. The dispersion is thought to be related to the hopping process of the carriers. The ${\epsilon}"$ is proportional to the reciprocal of the frequency. The dielectric relaxation time was extracted to about 0.318${\mu}s$ from the dielectric absorption spectrum.

• 한국전자파학회논문지
• /
• 제12권7호
• /
• pp.1182-1190
• /
• 2001

본 논문에서는 마이크로스트립 선로상의 금속부분을 일부 제거한 형태의 Photonic bandgap (PBG) 구조의 특성을 분석하고 형태를 최적화 한 후 전력 증폭기에 적용하여 고조파 동조를 수행하였다. 이 구조는 제작 및 접지에서 타 구조에 비해 유리하다. PCB 제작 과정의 오차를 줄이기 위해 단위 격자의 크기를 수직방향으로 증가시키고, 테이퍼 선로를 이용하여 입출력을 50 $\Omega$으로 유지시켰다. EM 시뮬레이션으로 PBG 구조의 특성을 분석하고 설계하였으며, 최종적으로 통과대역 손실 0.3~0.4dB, 저지대역폭 6~7GHz의 특성을 얻었다. 전력 증폭기에 PBG구조를 적용한 후 출력 전력은 0.72~0.99dB, PAE는 1.14~7.8 %, 3차 IMD는 1 dBc 증가하는 결과를 얻을 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.169-170
• /
• 2006

In this study, ultra thin films of ferroelectric vinylidene fluoride-trifluoroethylene (VF2-TrFE) copolymer were fabricated on degenerated Si (n+, $0.002\;{\Omega}{\cdot}cm$) using by spin coating method. A 1~5 wt% diluted solution of purified vinylidene fluoride-trifluoroethylene (VF2:TrFE=70:30) in a dimethylformamide (DMF) solvent were prepared and deposited on silicon wafers at a spin rate of 2000~5000rpm for 30 seconds. After annealing in a vacuum ambient at $200^{\circ}C$ for 60 min, upper gold electrodes were deposited by vacuum evaporation for electrical measurement. X-ray diffraction results showed that the VF2-TrFE films on Si substrates had $\beta$-phase of copolymer structures. The capacitance on $n^+$-Si(100) wafer showed hysteresis behavior like a butterfly shape and this result indicates clearly that the dielectric films have ferroelectric properties. The typical measured remnant polarization (2Pr) and coercive filed (EC) values measured using a computer controlled a RT-66A standardized ferroelectric test system (Radiant Technologies) were about $0.54\;C/cm^2$ and 172 kV/cm, respectively, in an applied electric field of ${\pm}0.75\;MV/cm$.