• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.127-134
• /
• 1989

The rate constants of the nucleophilic addition reaction of 3-mercaptopropionic acid to the ${\beta},\;{\beta}$-diethoxycarbonylstryene derivatives (H, p-OCH$_3$, 3,4,5-(OCH$_3)_3$, 3,4-methylenedioxy) were determined by ultraviolet spectrophotometry, and rate equation which could be applied over a wide pH range was obtained. On the basis of pH-rate profile and the presence of general base catalysis, a plausible mechanism of this addition reaction was propound:Below pH 6.0 the reaction was initiated by the addition of neutral 3-mercaptopropionic acid molecule, and in the range of pH 6.0∼8.0, a neutral 3-mercaptopropionic acid molecule and a sulfide anion competitively attacked to the double bond. Above pH 8.0, the reaction proceeded through the addition of a sulfide anion.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.402-405
• /
• 1997

Olefinic and cyclopropyl group substituted arenes (C6H5Y) react with [Cp*Ir(CH3COCH3)3]A2 (A=ClO4-, OTf-) to give η6-arene complexes, [Cp*Ir(η6-C6H5Y)]2+ (1a: Y=-CH=CH2 (a),-CH=CHCH3 (b),-C(CH3)=CH2 (c),-CH-CH2-CH2 (d)). Complex 1b-1d are readily converted into η3-allyl complexes, [Cp*(CH3CN)Ir(η3-CH(C6H5)CHCH2)]+ (2a) and [Cp*(CH3CN)Ir(η3-CH2(C6H5)CH2)]+ (2b), in the presence of Na2CO3 in CH3CN. The η6-styrene complex, 1a reacts with NaBH4 to give η5-cyclohexadienyl complex, [Cp*Ir(η5-C6H6-CH=CH2)]+ (3), while with H2 it gives η6-ethylbenzene complex [Cp*Ir(η6-C6H5CH2CH3)]2+ (4). Complex 1a and 1c react with HCl to give [Cp*Ir(η6-C6H5CH2CH2Cl)]2+ (5a) and [Cp*Ir(η6-C6H5CH(CH3)CH2Cl]2+ (5b), respectively.

• Journal of the Korean Chemical Society
• /
• v.61 no.6
• /
• pp.328-338
• /
• 2017

The density functional theory(DFT) and ab initio calculations have been applied to investigate hydrogen interaction of $H_2O_3(H_2O)_n$ clusters(n=1-5). The structures, IR spectra, and H-bonding energies are calculated at various levels of theory. The $trans-H_2O_3$ monomer is predicted to be thermodynamically more stable than cis form at the CCSD(T)/cc-pVTZ level of theory. For clusters, the geometries are optimized at the MP2/cc-pVTZ level of theory. The binding energy of $H_2O_3-H_2O$ cluster is predicted to be -6.39 kcal/mol at the CCSD(T)//MP2/cc-pVTZ level of theory after zero-point vibrational energy (ZPVE) and basis set superposition error (BSSE) correction. This result implies that $H_2O_3$ is a stronger proton donor(acid) than either $H_2O$ or $H_2O_2$. The average binding energies per $H_2O$ are predicted to be 8.25 kcal/mol for n=2, 7.22 kcal/mol for n=3, 8.50 kcal/mol for n=4, and 8.16 kcal/mol for n=5.

• Journal of Ginseng Research
• /
• v.2 no.1
• /
• pp.17-33
• /
• 1977

Panax Saponin A(PSA) , one of dammarane glycosides of Korean ginseng, was labeled with $^{3}H$ or $^{14}C$ by our Previously reported Procedures of organic synthesis. Tracer studies with $^{3}H$-PSA in wino yielded the following results: 1). Oral and intraperitoneal administration of $^{3}H$-PSA resulted in the rapid appearance and prolonged retention of $^{3}H$-PSA in all organs such as liver, brain, bone marrow and spleen of mice. 2). The amount pi cellular intake of $^{3}H$-PSA was shown to have a certain level of saturation ranging from 0.4mg to 0. 7mg Per 20gm body weight of mice. Administration of $^{3}H$-PSA within the dosage of the saturation point did net give urinary excretion of 3H-PSA. On the contrary, excessive administration of $^{3}H$-PSA resulted in rapid excretion of the substance in the urine of mice.

• Korean Journal of Materials Research
• /
• v.8 no.6
• /
• pp.477-483
• /
• 1998

$SiC_{4}$$C_{3}$$H_{ 8}$$H_{2}$와 $C_{3}$$H_{8}$ $H_{2}$, $CH_{3}$$SiCI_{3}$$CH_{4}$$H_{2}$계를 사용하여 흑연기판 위에 SiC와 SiC/C FGM을 CVD법에 의해 코팅하였다. $SiCI_{4}$$C_{3}$$H_{8}$ $H_{2}$ 계에서 SiC 증착 시 바람직한 수소의 비는 10-30사이였고 결정 배향성은 입력가스의 탄소비에 따라 여러번의 대 반전이 일어났다. 성장조건을 {111} 배향성을 갖도록 조절하는 것이 FGM층간 접착상태를 증진시킬 수 있는 방법으로 판단되었다. $CH_{3}$$SiCI_{3}$C$_{3}$$H_{8}$ $H_{2}$ 계에서는 SiC와 C의 비율을 조절하기가 $SiCI_{4}$$C_{3}$$H_{8} $H_{2}$계를 사용했을 때 보다 용이하였고, FGM 단면 관찰에서 층간의 뚜렷한 경계를 발견할 수 없을 정도로 우수한 층간 접착상태를 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4675-4681
• /
• 2014

This study examined the $H_2S$ removal characteristics, such as breakthrough time, adsorption capacity, and adsorption rate of adsorbents between Zeolite 3A and DETOX in terms of the $H_2S$ inflow concentration and adsorption temperature. The adsorption capacity of Zeolite 3A increased with increasing mass flow rate of hydrogen sulfide($H_2S$) inflow, but the breakthrough time decreased. On the other hand, both the adsorption capacity and breakthrough time of DETOX decreased with increasing mass flow rate of $H_2S$ inflow. The adsorption capacity and breakthrough time of Zeolite 3A decreased with increasing adsorption temperature but those of DETOX increased. The adsorption capacity of DETOX was higher than that of Zeolite 3A by a factor of 2.5 - 16.4 because the collision frequency that overcomes the activation energy barrier increased with increasing adsorption temperature. For Zeolite 3A and DETOX, the adsorption rate of $H_2S$ increased with increasing mass flow rate of $H_2S$ inflow and adsorption temperature. The adsorption rate of $H_2S$ for Zeolite 3A was 4 times as much as that for DETOX. For the removal of $H_2S$ in biogas, DETOX had an advantage over Zeolite 3A because DETOX had a much longer breakthrough time and greater adsorption capacity in the temperature range of 308~318K than Zeolite 3A.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.14 no.1
• /
• pp.107-115
• /
• 2012

In juvenile size, the maximum clearance rate and ingestion rate were 15mm, which is the 70.8 mL/h, 4245.0×104cells/h, respectively. But the lowest clearance rate and ingestion rate were found at 5mm, which is the 4.1 mL/h, 246.0×104cells/h, respectively. The highest clearance rate and ingestion rate of AFDW seen at 7.5mm, with 3.3 mL/mg AFDW/h, 196.0×104cells/mg AFDW/h, respectively. According to the results of water temperature, clearance rate and ingestion rate were lowest at 10℃, showing the 0.3 mL/h, 20.3×104cells/h, respectively. The highest clearance rate and ingestion rate were 25℃, which is the 16.6 mL/h, 993.4×104cells/h, respectively. But in 30℃, clearance rate and ingestion rate decreased to the 12.9 mL/h, 772.6×104cells/h, respectively. With respect to the food density, the experiment groups with 30×104 cells/mL and 240×104 cells/mL showed the clearance rate of 21.1 mL/h and 2.3 mL/h, respectively. But the experimental group with 120×104 cells/mL or more showed decreased clearance rate. While, the maximum ingestion rate was at 60×104 cells/m, showing the 876.2×104cells/h.

• YAKHAK HOEJI
• /
• v.37 no.3
• /
• pp.228-234
• /
• 1993

A new series of 7-deazapurine derivatives[7,8] as purine antagonists was prepared. Diethyl 4-cyano-N-(diphenyimethylene)-3-arylglutamate[3] were synthesized by LDA-catalyzed Michael addition of N-(diphenylrnethylene)glycine ethyl ester with (E)-2-cyano-3-arylacrylate. Deprotection yields diethyl 4-cyano-3-arylglutamate, which were easily cyclized to 4-cyano-2-ethoxycarbonyl-5-oxo-3-arylpyrrolidine[4]. The compounds[4] were treated with NaBH$_{4}$ and then with (C$_{2}$H$_{5}$)$_{3}$OBF$_{4}$ to give 4-cyano-5-ethoxy-2H-2-ethoxymethyl-3-aryl-3,4-dihydropyrrole[6], which were converted to 7-aryl-6-amino-8-ethoxymethyl-7,8-dihydro-7(3H, 9H)-deazapurine-2-thione[7] and 7-aryl-2,6-diamino-8-ethoxymethyl-7,8-dihydro-7(9H)-deazapurine[8] with possible activity against neoplastic disease.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.6
• /
• pp.52-54
• /
• 1982

p·Si-전해질 접합을 전해질로 6N H2SO4, 6N H2SO4(Ti3+), 6N H2SO4(Ti4+), 6N H2SO4(Ti4+/Ti3+)을 사용하여 만들었다. 이들 전해질중 6N H2SO4(Ti4-/Ti3+)을 사용할 때 p·Si 광음극이 안정하게 동학하며 높은 광전 감도를 가지고 있었다. p·Si-electrolyte junction are prepared by using p·Si photocatode in four different electrolytes such as 6N H2SO4, 6N H2SO4(Ti3+), 6N H2SO4(Ti4+), 6N H2SO4(Ti4+/Ti3+) respectively. Among those electrolytes 6N H2SO4(Ti4-/Ti3+) shows very good results, in which p·Si photocathode is stable.

• YAKHAK HOEJI
• /
• v.40 no.6
• /
• pp.734-738
• /
• 1996

The development of the alpha2 isoform of (Na,K)ATPase which is high affinity ouabain receptors was studied in the differentiating nonfusing muscle cell line BC3H-1. T he differentiation process of BC3H-1 cell line was confirmed by 2-dexy-D-[$^3$H] glucose uptake experiment and the quantity of the expression of ${\alpha}_2$ isoform was measured using a whole cell [$^3$H] ouabain-binding assay. Undifferentiated growing BC3H-1 cells, myoblasts, exhibited low levels of insulin-stimulated glucose uptake and [$^3$H] ouabain-binding sites. In contrast, differentiated BC3H-1 cells, myocytes, had a 5.6-fold increase in insulin-stimulated glucose uptake and 5-fold increase in [$^3$H] ouabain-binding sites. Scatchard analysis showed that myocytes developed more [$^3$H] ouabain-binding sites than myoblasts vath a dissociation constant (kd) of 6${\times}10^{-8}$M and capacity of 6.l${\times}10^{-5}$ sites/cell. Therefore. it seems that myoblasts express low levels of ${\alpha}_2$ subunit and probably the majority of ${\alpha}_1$ subunit, whereas myocytes express high levels of ${\alpha}_2$ isoform. The results indicate that the expression of ${\alpha}_2$ isoform is developmentally regulated during differentiation and that BC3H-1 culture system provides an excellent model for the study of differentiation and mechanism of (Na,K)ATPase action in muscle which requires electrical excitability.