• Journal of the Korean Applied Science and Technology
• /
• v.10 no.2
• /
• pp.57-63
• /
• 1993

This study investigated the reaction and variation of fatty acid composition of soybean oil when it is partially hydrogenated until its iodine value(IV) shifts from 134 to 110. Experment was conducted under he outlined reactiion conditions of temperatures(170, 190 and $210^{\circ}C$), pressure(1.3, 2.8 and 4.2atm) and nickel(Ni) catalyst concentraons(0.005, 0.01, 0.05, and 0.1%) with a fixed agitation(350rpm). Further investigation was also made to see the effect of added lecithin on hydrogenation. When reaction temperature was gradually raised and catalyst concentration increased, the content of linolenic acid progressively decreased while the increase amount of stearic acid reduced(P<0.05). On he other hand when pressure gradually increased, the contents of stearic acid and linolenic acid increased(P<0.05). Meanwhile when lecithin was added, reaction time increased by two to six times more than when no addition was made.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.220-220
• /
• 2008

물 첨가 열화학기상증착을 이용하여 750도에서 길고 수직 성장한 다중벽 탄소나노튜브를 합성하였다. 사용된 기판으로는 우선 실리콘 웨이퍼에 열 증착기로 확산 방지층으로 Ti 50 nm를 입히고 그 위에 Al 15 nm를 입히고 난 후 촉매 층으로 Invar 36 (63 wt% Fe, 37 wt% Ni)을 1 nm 얇게 증착하였다. 탄소나노튜브의 성장에 사용된 가스는 Ar, $C_2H_2$ 이다. Ar은 분위기 가스로 사용되었고, $C_2H_2$는 탄소나노튜브의 성장에 관여하는 가스이다. 또한, 합성중에 약간의 물을 첨가함으로 기존의 탄소나노튜브 성장 길이보다 10배 가량 더 성장 하였다. 이것은 합성 중의 물 첨가로 인해 촉매 입자들의 활동성이 기존에 비해 더 증가했다는 것을 보여준다. 합성된 탄소나노튜브의 길이와 정렬도를 보기 위해 주사전자현미경 (scanning electron microscopy, SEM)을 이용하였고, 탄소나노튜브의 지름과 벽의 개수를 파악하기 위해 투과전자현미경 (transmission electron microscopy)을 이용하였다.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.996-1005
• /
• 2017

In this paper, nuclear data for cross sections of the $^{64}Zn(n,2n)^{63}Zn$, $^{64}Zn(n,3n)^{62}Zn$, $^{64}Zn(n,p)^{64}Cu$, $^{66}Zn(n,2n)^{65}Zn$, $^{66}Zn(n,p)^{66}Cu$, $^{67}Zn(n,p)^{67}Cu$, $^{68}Zn(n,p)^{68}Cu$, and $^{68}Zn(n,{\alpha})^{65}Ni$ reactions were studied for neutron energies up to 40 MeV. In the nuclear model calculations, TALYS 1.6, ALICE/ASH, and EMPIRE 3.2 codes were used. Furthermore, the nuclear data for the (n,2n) and (n,p) reaction channels were also calculated using various cross-section systematics at energies around 14-15 MeV. The code calculations were analyzed and obtained using the different level densities in the exciton model and the geometry-dependent hybrid model. The results obtained from the excitation function calculations are discussed and compared with literature experimental data, ENDF/B-VII.1, and the TENDL-2015 evaluated data.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.1
• /
• pp.123-132
• /
• 2021

Radiological impact analyses were carried out for a near-surface radioactive waste repository at Gyeongju in South Korea. The RESRAD-ONSITE code was applied for the estimation of maximum exposure doses by considering various exposure pathways based on a land area of 2,500 ㎡ with a 0.15 m thick contamination zone. Typical influencing input parameters such as shield depth, shield materials' density, and shield erosion rate were examined for a sensitivity analysis. Then both residential farmer and industrial worker scenarios were used for the estimation of maximum exposure doses depending on exposure duration. The radiation dose evaluation results showed that 60Co, 137Cs, and 63Ni were major contributors to the total exposure dose compared with other radionuclides. Furthermore, the total exposure dose from ingestion (plant, meat, and milk) of the contaminated plants was more significant than those assessed for inhalation, with maximum values of 5.5×10-4 mSv·yr-1 for the plant ingestion. Thus the results of this study can be applied for determining near-surface radioactive waste repository conditions and providing quantitative analysis methods using RESRAD-ONSITE code for the safety assessment of disposing radioactive materials including decommissioning wastes to protect human health and the environment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2021

Performance of a NACA 63₄-021 hydrofoil in motion under and in close proximity of a free surface for a large range of angles of attack is studied. Lift and drag coefficients of the hydrofoil at different submergence depths are investigated both numerically and experimentally, for 0° ≤ AoA ≤ 30° at a Reynolds number of 10⁵. The results of the numerical study are in good agreement with the experimental results. The agreement confirms the new finding that for a submerged hydrofoil operating at high angles of attack close to a free surface, the interaction between the hydrofoil-motion induced waves on the free surface and the hydrofoil results in mitigation of the flow separation characteristics on the suction side of the foil and delay in stall, and improvement in hydrofoil performance. In comparing with a baseline case, results suggest a 55% increase in maximum lift coefficient and 90% average improvement in performance for, based on the lift-to-drag ratio, but it is also observed significant decrease of lift-to-drag ratio at lower angles of attack. Flow details obtained from combined finite volume and volume of fluid numerical methods provide insight into the underlying enhancement mechanism, involving interaction between the hydrofoil and the free surface.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.63-71
• /
• 2022

In this study, the interfacial reaction and drop impact reliability of Sn-Ag-Cu (SAC) solder and electroless nickel autocatalytic gold (ENAG) were studied. In addition, the solder joint properties with the ENAG surface finish was compared with electroless nickel immersion gold (ENIG) and electroless nickel electroless palladium immersion gold (ENEPIG). The IMC thickness of SAC/ENAG and SAC/ENEPIG were 1.15 and 1.12 ㎛, respectively, which were similar each other. The IMC thickness of the SAC/ENIG was 2.99 ㎛, which was about two times higher than that of SAC/ENAG. Moreover, it was found that the IMC thickness of the solder joint was affected by the metal turnover (MTO) condition of the electroless Ni(P) plating solution, and it was found that the IMC thickness increased when the MTO increased from 0 to 3. The shear strength of SAC/ENEPIG was the highest, followed by SAC/ENAG and SAC/ENIG. It was found that when the MTO increased, the shear strength was lowered. In terms of brittle fracture, SAC/ENEPIG was the lowest among the three joints, followed by SAC/ENAG and SAC/ENIG. Likewise, it was found that as MTO increased, brittle fracture increased. In the drop impact test, it was confirmed that the 0 MTO condition had a higher average number of failures than the 3 MTO condition, and the average number of failures was also higher in the order of SAC/ENEIG, SAC/ENAG, and SAC/ENIG. As a result of observing the fracture surface after the drop impact, it was found that the fracture was between the IMC and the Ni(P) layer.

• Economic and Environmental Geology
• /
• v.56 no.1
• /
• pp.55-63
• /
• 2023

Variations in geochemical and mineralogical properties of the ferromanganese(Fe-Mn) crust reflect environmental changes. In the present study, geochemical and mineralogical analyses, including micro X-ray fluorescence and X-ray diffraction, were utilized to reconstruct the paleo-ocean environment of western Pacific Magellan seamount cluster. Samples of the Fe-Mn crust were collected using an epibenthic sledge from the open seamount XX (151° 51.12' 7.2" E and 16° 8.16' 9.6" N, 1557 meters below sea level) in the Western Pacific Magellan Seamount. According to the structure and phosphating status, the Fe-Mn crust of the OSM-XX can be divided into the following: phosphatizated (L4-L5), massive non-phosphatizated (L3), and porous non-phosphatizated (L1-L2) portions. All ferromanganese layers contain vernadite, and owing to the presence of carbonate fluorapatite (CFA), the phosphatizated portion (L4-L5) is rich in Ca and P. The massive non-phosphatizated section (L3) contains high Mn, Ni, and Co, whereas the porous non-phosphatizated portion (L1-L2), which comprises detrital quartz and feldspar, is rich in Fe. Variations in properties of the Fe-Mn crust from the OSM-XX reflect changes in the nearby marine environment. The formation of this crust started at approximately 51.87 Ma, and precipitation of the CFA during the global phosphatization event that occurred at approximately 36-32 Ma highlights an elevated sea level and low temperature during the associated period. The high Mn, Ni, and Co concentrations and elevated Mn/Fe ratios of samples from the massive phosphatizated portion indicate that the oxygen minimum zone (OMZ) was enhanced, and reducing conditions prevailed during the crust formation. The high Fe and low Mn/Fe ratios in the porous portion indicate a weak OMZ and dominantly oxidizing conditions. These data reflect environmental changes following the end of the Mi-1 glacial period in the Miocene-Oligocene boundary. Subsequently, Mn/Fe and Co/Mn ratios increased slightly in the outermost part of Fe-Mn crust because of the enhanced bottom current and OMZ associated with the continued cooling from approximately 9 Ma. However, the reduced carbonate dissolution rate in the Pacific Ocean from approximately 6 Ma decreased the growth rate of the Fe-Mn crust.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.2
• /
• pp.93-103
• /
• 2009

To measure the mineral contents of marine invertebrates, we collected 239 individuals from 52 species from the east (Pohang), west (Gunsan), and south (Tongyeong) coasts of Korea: 34 species of molluscan shellfish (Gastropoda and Bivalvia), 6 species of Cephalopoda, 8 species of Crustacea, and 4 other species. The mean contents of the macro mineral in the 100g edible portion of molluscan shellfish were high in the oder of Na (355.1 mg), P (128.1 mg), K (110.8 mg), Mg (83.8 mg) and Ca (57.5 mg). And the mean contents of the micro mineral in the molluscan shellfish were high in the oder of Fe ($41.12{\mu}g/g$), Zn ($30.48{\mu}g/g$), Mn ($3.81{\mu}g/g$), Cu ($3.49{\mu}g/g$) and Ni ($0.35{\mu}g/g$). We could not observe clear regional variation in the mineral content of the molluscan shellfish species. The mean contents of the macro mineral in the 100g edible portion of other marine invertebrates (Cephalopoda, Crustacea, etc.) were high in the oder of Na (400.7 mg), P (145.1 mg), K (105.0 mg), Mg (63.2 mg) and Ca (49.0 mg). And the mean contents of the micro mineral in other marine invertebrates were high in the oder of Zn ($24.4{\mu}g/g$), Fe ($13.8{\mu}g/g$), Cu ($4.88{\mu}g/g$), Mn ($2.14{\mu}g/g$) and Ni ($0.12{\mu}g/g$). The daily average intakes of the macro mineral through fisheries products consisted of P (125.9 mg), Na (119.3 mg), K (101.8 mg), Ca (31.0 mg), Mg (27.6 mg). And the daily average intakes of the micro mineral through fisheries products consisted of Zn (0.92 mg), Fe (0.68 mg), Cu (0.12 mg) and Mn (0.07 mg). The respective intakes of the minerals (P, Mg, Na, Ca, K) from fish were about 18.0, 7.9, 8.0, 4.4 and 2.2% of the dietary reference intakes for Koreans (KDRIs) set by the Korean Nutrition Society. And the respective intakes of micro mineral (Cu, Zn, Fe, Mn) from fish were about 14.6, 9.2, 6.7, and 2.1% of the dietary reference intakes for Koreans (KDRIs). Therefore, fisheries products play a very important role as a source of mineral.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.4
• /
• pp.53-63
• /
• 2003

Objectives of this research were to fractionate heavy metals in soil samples in the upper Okdong River basin and to assess the potential pollution index of each metal fraction. Soil samples were collected from the cultivated land soils and analyzed for physical and chemical properties. pH of cultivated soils ranged from 5.2 to 7.6. Contents of total kelhaldal nitrogen and loss on ignition were in the ranges of 0.6∼2.5%, and 1.9∼12.9%, respectively. Heavy metals in the cultivated land soils were higher in the abandoned closed coal mine near field soils than those in the paddy soils. Total concentrations of metals in the cultivated land soils were in the orders of Zn > Pb > Ni > Cu > Cd, exceed the corrective action level of the Soil Environment Conservation Law and higher than the naturals were abundance levels reported from uncontaminated cultivated land soils. Mobile fractions of metals were relatively small compared to the total concentrations. Soil Pollution Assesment Index (SPAI) values of each fraction of metals were leveled from Non polluted to Moderately polluted based on total concentrations. SPAI values of mobil fractions were lower than those of immobile fractions. Results on metal fractions and SPAI values of the cultivated land soils indicate that field soils samples were contaminated with heavy metals and had potential to cause a detrimental effects on plants. A prompt countermeasure to prevent field soils in the abandoned closed coal mine near fields are urgently needed.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.379-386
• /
• 1994

The elution behaviors in reversed-phase liquid chromatography were investigated thermodynamically for 2-hydroxy-arylazopyrazolone chelates with Ni(II), Cu(II), Co(III), Cr(III) on Novapak $C_{18}$ column. There was a good linear dependence of the capacity factor(k') on the variations of column temperature in van't Hoff plot. From this result, it was confirmed that the retention mechanism of these chelates in the reversed phase liquid chromatography system was invariant under the condition of various temperatures. For the most cases of the chelates studied, the dependence of capacity factor(1n k') on enthalpy$(-{\Delta}H)^{\circ}$, calculated by van't Hoff plot showed a good linearity(r=0.980~0.999) except [Pm(2-OH_(5-Cl)PaPz](r=0.787) and also the compensation temperatures(${\beta}$) showed constant values. The range of compensation temperature values calculated from the slope of $-{\Delta}H^{\circ}$ vs 1n k' plots was 374.3~806.9K. It was suggested that the retention of metal-2-hydroxy-arylazopyrazolone chelates in the reversed phase liquid chromatography system was largely affected by the hydrophobic effect.