• Journal of Microbiology and Biotechnology
• /
• v.22 no.5
• /
• pp.607-613
• /
• 2012

Improvement of endoglucanase activity was accomplished by utilizing error-prone rolling circle amplification, supplemented with 1.7 mM $MnCl_2$. This procedure generated random mutations in the Bacillus amyloliquefaciens endoglucanase gene with a frequency of 10 mutations per kilobase. Six mutated endoglucanase genes, recovered from six colonies, possessed endoglucanase activity between 2.50- and 3.12-folds higher than wild type. We sequenced these mutants, and the different mutated sites of nucleotides were identified. The mutated endoglucanase sequences had five mutated amino acids: A15T, P24A, P26Q, G27A, and E289V. Among these five substitutions, E289V was determined to be responsible for the improved enzyme activity. This observation was confirmed with site-directed mutagenesis; the introduction of only one mutation (E289V) in the wild-type endoglucanase gene resulted in a 7.93-fold (5.55 U/mg protein) increase in its enzymatic activity compared with that (0.7 U/mg protein) of wild type.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.1
• /
• pp.1-5
• /
• 2006

The effect of A/B moi ratios and sintering temperatures on dielectric properties and microstructure of $(Ba_{0.93}Ca_{0.07})_m(Ti_{0.82}Zr_{0.18})O_3$ ceramics were investigated. The dielectric constant decreased with increasing the A/B mol ratio. However, the dielectric loss is improved. As the dielectric properties of A/B mol ratio with m = 1.009 at sintered temperature $1260^{\circ}C$, we obtained dielectric constant 12,800, dielectric loss $3.5\%$ and Y5V temperature characteristics. Highly reliable Ni-MLCCs, 1.6mm$(length){\time}0.8mm(width){\time}0.8mm$(height) with capacitance of 1.23 ${\mu}F$ and 야ssipation loss of $5.2\%$ were obtained employing dielectric material composed of $(Ba_{0.93}Ca_{0.07})_{1.009}(Ti_{0.82}Zr_{0.18})O_3$ - $MnO_2\;0.2wt\%-Y_2O_3\;0.18wt\%,\;-\;SO_2\;0.15wt\%-(Ba_{0.4}Ca_{0.6})SiO_3\;1wt\%$.

• Journal of Dairy Science and Biotechnology
• /
• v.21 no.2
• /
• pp.138-147
• /
• 2003

We here analyzed and proposed the structures of the N-linked sugar chains of PAS-7 from bovine milk fat globule membrane. The N-linked sugar chains were liberated from PAS-7 by hydrazinolysis and, after modifying the reducing ends with 2-aminopyridine (PA), were separated into one neutral (7N,55%) and two acidic (7M mono-, 43%; 7D, di-, 2%) sugar chain roups. The latter were converted into neutral groups (7MN and 7DN) by sialidase digestion. The structure of each of these PA-neutral sugar chains was determined by sugar analysis, sequential exoglycosidase digestion, partial acetolysis, and 1H-NMR spectroscopy. The results show that the 10 sugar chains were of the biantennary complex type with and without fucose. The structure of 7N2A one of the major sugar chains, was proposed as; [structure: see text] A structural comparison between PAS-6 and -7 indicated that although they shared the same protein core, their sugar moiety was markedly different, involving the existence of a different pathway during the post-transcriptional modification.

• Transactions of Materials Processing
• /
• v.24 no.3
• /
• pp.155-160
• /
• 2015

One of the most important aspects in multi-stage shape drawing is the proper design of the intermediate dies especially to provide adequate metal distribution. In the current study, a method for designing the intermediate dies has been developed to manufacture hollow linear motion guide rails by multi-stage shape drawing. The design method is based on the modified virtual die method. The effectiveness of the proposed design method was verified by FE-simulations and experiments using Mn55Cr carbon steel. From the results of the FE-simulations and the experiments, the proposed design method led to a drawn product with a sound shape. The dimensional tolerances of the product were within the allowable specified tolerances.

• Asian Journal of Turfgrass Science
• /
• v.7 no.2_3
• /
• pp.55-60
• /
• 1993

Soil profile was well developed into four horizons, $A_1$, $A_3$, $B_2$and C at 100cm-depth in most four golf courses in Kyonggi province. Distribution of root system of Korean lawngrass was abundant in dark yellowish or yellowish brown $A_1$ horizon with low hardness(8~14mm yamanaka scale), moderately in yellowish brown $A_3$ horizon with moderate hardness(16~23mm) rarely in $B_3$horizon(15~60cm depth) and no in C horizon. Optimum soil hardness for good root growth of Korean lawngrass appeared to be less than 16mm mineral nutrient contents. Such as Ca++, Mg++, K+, Mn++ and Fe showed relatively higher concentration in lower horizon indicating the leaching of minerals. The increasing tendency of soil pH with depth seemed to the result of mineral leaching. There was significant positive correlation between Ca+Mg and pH, manganese content appeared to be too high(261~789ppm) in $A_1$ horizon. The contents of organic matter and phosphorus were bight in $A_1$ horizon and greatly varied among golf courses.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.958-967
• /
• 2023

This work studies the defect features in a dilute FeMnNi alloy by an Object Kinetic Monte Carlo (OKMC) model based on the "grey-alloy" method. The dose rate effect is studied at 573 K in a wide range of dose rates from 10^-8 to 10^-4 displacement per atom (dpa)/s and demonstrates that the density of defect clusters rises while the average size of defect clusters decreases with increasing dose rate. However, the dose-rate effect decreases with increasing irradiation dose. The model considered two realistic mechanisms for producing <100>-type self-interstitial atom (SIA) loops and gave reasonable production ratios compared with experimental results. Our simulation shows that the proportion of <100>-type SIA loops could change obviously with the dose rate, influencing hardening prediction for various dose rates irradiation. We also investigated ways to compensate for the dose rate effect. The simulation results verified that about a 100 K temperature shift at a high dose rate of 1×10^-4 dpa/s could produce similar irradiation microstructures to a lower dose rate of 1×10^-7 dpa/s irradiation, including matrix defects and deduced solute migration events. The work brings new insight into the OKMC modeling and the dose rate effect of the Fe-based alloys.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2650-2655
• /
• 2023

In the process of growth and development, plants not only absorb essential nutritional elements, but also absorb radioactive and non-essential elements from the environment, and their distribution varies in different parts of the plant. In this study, neutron activation analysis and gamma spectrometry were performed on stems, roots, and leaves of vegetables. The results indicate that the accumulation of radionuclides and multi-elements depends on the plant type and plant parts. Activity concentrations of ²²⁶Ra and ²³²Th in plants were accumulated in the following order: Roots > Stems > Leaves. The highest concentrations of ⁴⁰K and ²¹⁰Pb were observed in the stems and leaves of plants, respectively. Essential nutrient requirements of plants are in the following order: K > Ca > Mg > Fe > Zn > Mn. Among the nonessential metals, the concentration of Na in the vegetable sample was much greater than those of the other elements. The K/Na ratio in the plant depends on the type of plant and the translocation within the plant.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.162-162
• /
• 2022

This study was carried out to investigate the effects of nitrogen, phosphorus, potassium (three main macro elements of fertilizer) on growth, yield and mineral contents of Platycodon grandiflorum for. duplux and to obtain the basic data of the proper fertilizer application for increasing the yield of P. grandiflorum for. duplux. Plant height showed significantly good results in all fertilization treatments compared to non fertilizer group (the control, T0), and in particular, the highest was 85.7 cm in the complete group (T4). Chlorophyll content showed a high amount in the range of 20.7 to 23.8 against all fertilization treatment groups, except for non fertilizer (T0) and non nitrogen (T1). The fresh weight of roots were higher quantity than other fertilization treatments in the complete group 55.8 g (T4). The mineral nutrient content ofNa, Mg, Cu and Al of the roots of P. grandiflorum for. duplux from T1 group showed the lowest amount compared to other groups. In addition, P from T2 group, Mn from T3 group and Ca, Fe, Zn from T4 group also exhibited the lowest mineral content compared to other groups respectively.

• Korean Journal of Poultry Science
• /
• v.36 no.4
• /
• pp.337-342
• /
• 2009

This work was conducted to investigate the manure excreta and chemical compositions of layers. Two hundred 1-d-old ISA Brown layers were used in this work, and ten of 200 layers were selected for measurement of manure excreta with feeding phase. Means of the manure excreta per bird, the moisture content of poultry, and the dried manure were $124.7\;{\pm}\;27.5\;g$/bird/day, $76.9\;{\pm}\;1.9%$, and $29.1\;{\pm}\;3.9\;g$/bird/day, respectively. N, $P_2O_5$, and $K_2O$ of manure (55 weeks) were $1.39\;{\pm}\;0.139$, $0.62\;{\pm}\;0.11$ and $0.68\;{\pm}\;0.09%$, respectively. pH, $BOD_5$, $COD_{Mn}$, and suspended solids (SS) were $8.19\;{\pm}\;0.71$, $50,266\;{\pm}\;621\;mg/L$, $62,832\;{\pm}\;803\;mg/L$, and $121,725\;{\pm}\;16,165\;mg/L$, respectively. Heavy metal contents in the manure were $0.003\;{\pm}\;0.0013\;ppm$ for Hg and $0.008\;{\pm}\;0.0012\;ppm$ for Pb, the latter of which was highly low compared with the standard (150 ppm), but no Cd was detected. The results of this work show the average excretion amounts and chemical compositions of layer's manure, which is used as an organic fertilizer.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.364-372
• /
• 1996

The sorption and desorption properties of U(VI), Th(IV), Zr(IV), Cu(II), Pb(II), Ni(II), Zn(II), Cd(II) and Mn(II) ions on XAD-16-[2-(2-thiazolylazo)-p-cresol](TAC) chelating resin were studied by elution method for selective separation, concentration and recovery of trace metal ions in sea water. The optimum conditions for the sorption of metal ions were examined with respect to flow rate, pH and concentration of buffer solution. The overall capacities of some metal ions on this chelating resin were 0.41mmol U(VI)/g resin, 0.55mmol Th(IV)/g resin, 0.43mmol Cu(II)/g resin, and 0.32mmol Zr(IV)/g resin, respectively. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 5.0 was found as Th(IV)>Cu(II)>U(VI)>Zr(IV)>Pb(II)>Ni(II)>Zn(II)>Cd(II)>Mn(II). Desorption of characteristics for metal ions were investigated with desorption agents such as $HNO_3$, HCl, $HClO_4$, $H_2SO_4$, and $Na_2CO_3$. It was found that most of metal ions except Zr(IV) showed high desorption efficiency with 2M $HNO_3$. But, desorption and recovery of Zr(IV) ion were successfully performed with 1M $H_2SO_4$. The resin was applied for separation and preconcentration of trace amount of U(VI) ion from artificial sea water and the recovery of U(IV) was over 96%.