• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.367-375
• /
• 2003

The aim of this study was to investigate the soil physical properties and the traction characteristics of paddy field before tillage by a computer simulation. Soil physical properties, such as soil moisture content, bulk density, soil hardness, and soil texture were measured in the twelve rice production area. Mathematical model based on dimensional analysis which include soil physical properties and vehicle factors was used for the computer simulation. Most of the soil texture of the investigated area was silty loam, loam and silty clay loam. Soil moisture content ranged between 20 and 40% mostly. Soil bulk density was in the range of 1,500 to $1,700kg\;m^{-3}$. Soil hardness ranged between 2 to $12kg\;cm^{-2}$ mostly. Soil hardness incorporates the effects of many soil physical properties such as moisture content, texture and bulk density, and so the range of soil hardness was greater than that of any other physical properties. The predicted net traction was in the range of 70 to 1,500 kgf depending on the area, but it was above 1,000 kgf for most of the investigated area. Thus it was concluded that 50 HP tractor can pull the four row moldboard plow considering the conventional tillage depth and width. But for the soft soil area such as Andong and Namyang, tractor itself may have mobility problem and show high slip during plowing operation.

• Journal of Korean Dental Science
• /
• v.10 no.1
• /
• pp.10-21
• /
• 2017

Purpose: The purpose of this study was to investigate the electrochemical characteristics of nanotubular Ti-25Nb-xZr ternary alloys for dental implant materials. Materials and Methods: Ti-25Nb-xZr alloys with different Zr contents (0, 3, 7, and 15 wt.%) were manufactured using commercially pure titanium (CP-Ti), niobium (Nb), and zirconium (Zr) (99.95 wt.% purity). The alloys were prepared by arc melting in argon (Ar) atmosphere. The Ti-25Nb-xZr alloys were homogenized in Ar atmosphere at $1,000^{\circ}C$ for 12 hours followed by quenching into ice water. The microstructure of the Ti-25Nb-xZr alloys was examined by a field emission scanning electron microscope. The phases in the alloys were identified by an X-ray diffractometer. The chemical composition of the nanotube-formed surfaces was determined by energy-dispersive X-ray spectroscopy. Self-organized $TiO_2$ was prepared by electrochemical oxidation of the samples in a $1.0M\;H_3PO_4+0.8wt.%$ NaF electrolyte. The anodization potential was 30 V and time was 1 hour by DC supplier. Surface wettability was evaluated for both the metallographically polished and nanotube-formed surfaces using a contact-angle goniometer. The corrosion properties of the specimens were investigated using a 0.9 wt.% aqueous solution of NaCl at $36^{\circ}C{\pm}5^{\circ}C$ using a potentiodynamic polarization test. Result: Needle-like structure of Ti-25Nb-xZr alloys was transform to equiaxed structure as Zr content increased. Nanotube formed on Ti-25Nb-xZr alloys show two sizes of nanotube structure. The diameters of the large tubes decreased and small tubes increased as Zr content increased. The lower contact angles for nanotube formed Ti-25NbxZr alloys surfaces showed compare to non-nanotube formed surface. The corrosion resistance of alloy increased as Zr content increased, and nanotube formed surface showed longer the passive regions compared to non-treatment surface. Conclusion: It is confirmed that corrosion resistance of alloy increased as Zr content increased, and nanotube formed surface has longer passive region compared to without treatment surface.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.6
• /
• pp.292-300
• /
• 2008

Dental implant system is composed of abutment, abutment screw and implant fixture connected with screw. The problems of loosening/tightening and stability of abutment screw depend on surface characteristics, like a surface roughness, coating materials and friction resistance and so on. For this reason, surface treatment of abutment screw has been remained research problem in prosthodontics. The purpose of this study was to investigate the stability of TiN and WC coated dental abutment screw, abutment screw was used, respectively, for experiment. For improving the surface characteristics, TiN and WC film coating was carried out on the abutment screw using EB-PVD and sputtering, respectively. In order to observe the coating surface of abutment screw, surfaces of specimens were characterized, using field emission scanning electron microscope(FE-SEM) and energy dispersive x-ray spectroscopy(EDS). The stability of TiN and WC coated abutment screw was evaluated by potentiodynamic, and cyclic potentiodynamic polarization method in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The corrosion potential of TiN coated specimen was higher than those of WC coated and non-coated abutment screw. Whereas, corrosion current density of TiN coated screws was lower than those of WC coated and non-coated abutment screw. The stability of screw decreased as following order; TiN coating, WC coating and non-coated screw. The pitting potentials of TiN and WC coated specimens were higher than that of non-coated abutment screw, but repassivation potential of WC coated specimen was lower than those of TiN coated and non-coated abutment screws due to breakdown of coated film. The degree of local ion dissolution on the surface increased in the order of TiN coated, non-coated and WC coated screws.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.83-83
• /
• 2017

생체재료의 표면은 이식과 동시에 생체계면의 역할을 하게 되어, 일련의 생물학적 반응이 시작되고 진행되는 중요한 장소가 된다. 초기에 생체계면에서 일어나는 단백질 흡착이나 염증반응을 비롯한 생물학적 반응들은 궁극적으로 임플란트의 성패를 좌우할 만큼 중요하다. 골융합을 개선하기 위한 다른 방법으로 생체불활성의 타이타늄 (Ti)과 골조직의 능동적인 반응을 이루기 위해 생체활성 표면을 부여함으로서 계면에서의 골형성 반응을 증진시키는 방법이 이용된다. 생체불활성의 Ti과 Ti합금은 골조직과 직접적인 결합을 이루지 못하므로, 골조직과의 반응을 향상하기 위해 여러 종류의 생체활성 재료를 코팅하는 방법이 연구되어 왔고, 이 중 생체의 변화와 가장 유사한 하이드록시아파타이트 코팅이 가장 대중적인 방법으로 사용되었으며 이는 초기 골형성을 촉진하는 것으로 알려졌다. 치과용 임플란트의 표면형상과 화학조성이 골 융합에 영향을 미치는 가장 중요한 인자이므로 최근의 연구동향은 이들 두 가지 표면특성을 결합함으로서 결과적으로 최적의 골세포반응을 유도하고, 골융합 후 골조직과의 micromechanical interlocking에 의해 임플란트의 안정성에 중요한 역할을 하는 마이크론 단위의 표면조도와 표면 구조를 유지하면서, 부가적으로 골 조직 반응을 능동적으로 개선할 수 있는 생체활성 성분을 부여하여 골 융합에 상승효과를 이루기 위한 표면처리법에 관해 많은 연구가 요구되어지고 있다. 따라서 골을 구하는 원소인 망간과 실리콘으로 치환된 하이드록시아파타이트를 플라즈마 전해 산화법으로 코팅하여 세포와 잘 결합할 수 있는 표면을 제공함으로써 골 융합과 치유기간을 단축시킬 수 있을 것으로 사료된다. 실험방법은 시편은 치과 임플란트 제작 합금인 Ti-6Al-4V ELI disk (grade 5, Timet Co., USA; diameter, 10 mm, thickness, 3 mm)이며, calcium acetate monohydrate, calcium glycerophosphate, manganese(II) acetate tetrahydrate, sodium metasilicate을 설계조건에 따라 혼합 제조된 전해질 용액을 이용하여 플라즈마 전해 산화법으로 표면 코팅을 실시하였다. 각 시편의 플라즈마 전해시 전압은 280V로 인가하였고, 전류밀도는 70mA로 정전류를 공급하여 해당 인가전압 도달 후 3분 동안 정전압 방식을 유지하였다. 코팅된 피막 표면을 주사전자현미경과 X-선 회절분석을 통하여 미세구조 및 결정상을 관찰하였다. 또한 코팅된 표면의 생체활성 평가는 정량적으로 평가하기 위해 동전위시험과 AC 임피던스를 통하여 시행하였다. 분극거동을 확인하기 위해 potentiostat (Model PARSTAT 2273, EG&G, USA)을 이용하여 구강 내 환경과 유사한 $36.5{\pm}1^{\circ}C$의 0.9 wt.% NaCl에서 실시하였다. 전기화학적 부식 거동은 potentiodynamic 방법으로 조사하였고 인가전위는 -1500 mV에서 2000 mV까지 분당 1.67 mV/min 의 주사속도로 인가하여 시험을 수행하였다. 임피던스 측정은 potentiostat (Model PARSTAT 2273, EG&G, USA)을 이용하였으며, 측정에 사용한 주파수 영역은 10mHz ~ 100kHz 까지의 범위로 하여 조사하였고 ZSimWin(Princeton applied Research, USA) 소프트웨어를 사용하여 용액의 저항, 분극 저항 값을 산출하였다. 망간의 함량이 증가할수록 불규칙한 기공을 보였으며, 실리콘은 $TiO_2$ 산화막 형성을 저해하는 경향을 확인할 수 있었다. 단독으로 표면을 처리한 경우보다 두 가지 원소를 이용해 복합 표면처리를 시행한 경우가 내식성이 좋아 임플란트과의 골 유착에 긍정적인 영향을 미칠 것으로 사료된다.

• Journal of fish pathology
• /
• v.7 no.1
• /
• pp.23-36
• /
• 1994

A total of 8 strains of Staphylococcus epidermidis isolated in land-marine tank system of Kyongnam and Kyongbuk. Prefecture were tested for the biological and biochemical characteristics. These strains were isolated from pathologic specimens of cultured flounder. Paralichthys olivaceus. Growth of the isolates was good on BHIA, HIA. Staphylococcus No. 110 and ETGP. Growth was good at NaCl concentration between 2.0 and 3.0%, about $30^{\circ}C$ and at pH values about 7.0. DNase and coagulase production were negative, and all isolates except FSJ-2 strain were positive in hemolysis. Urease was positive reaction, and novobiocin resistance was negative. Acid was produced anaerobically from glucose and maltose. All isolates except FSJ-19 strain produced weakly were negative in anaerobic acid production from mannitol. Acid was produced aerobically from glucose, fructose, galactose, sucrose, maltose and dextrine. But all isolates were not gas production. In characterization of clinically isolates, four different biotype codes were obtained when the all isolated were tested simultaneously. Four different antibiotic susceptibility patterns were obtained. On the basis of these characteristics, the isolates were identified as Staphylococcus epidermidis.

• Journal of Embryo Transfer
• /
• v.16 no.1
• /
• pp.7-14
• /
• 2001

The aims of these study were to diagnose early pregnancy and reproductive disorders by using progesterone concentration and ultrasonography. The measurement of blood progesterone (P$_4$) concentration was conducted to diagnose pregnancy and to detect corpus luteum (CL) or evaluate disorder of CLs. As a result, the incidence rates of reproductive disorders were as follows : SH and EED (41.9%), inacitve ovaries (32.6%), follicullar cyst (9.3%), PCL (7.0%), endometritis (4.7%), pyometra (2.3%) and luteal cyst (2.3%). 61 Cows having P$_4$concentration 1.0 ng/ml(at the insemination) were increased to 1.0 ng/ml $\geq$ 6day after insemination. 50 cows among 61 cows were diagnosed pregnant. 8 cows among 13 HanWoos having P$_4$concentration 1.0 ng/ml at the insemination and 1.0 ng/mnl 6 day after insemination had non-ovulatory estrus and the others had P$_4$concentration 1.0 ng/ml at the insemination and 1.0 ng/ml $\geq$ 6 day after insemination, which was the error of estrus detection. All 13 cows were diagnosed non-pregnant. 47 cows diagnosed pregnant after insemination of P$_4$concentration 3.0 ng/ml were examined by ultrasonography at 30 day post-insemination. As a result, 41 cows were diagnosed pregnant (87.2%) but 14 cows having P$_4$concentration 3.0 ng/ml at 21 day after insemination was diagnosed to non-pregnancy. Calving intervals by surveying 100 cows were as follows 11~12 months (20%), 12~13 months (36%), 13~14 months (19%), 14 months $\geq$ (25%), respectively. In conclusion, hormone and ultrasonography help to detect reproductive disorders exactly and diagnose early pregnancy. This study suggest that diagnosis of early pregnancy and reproductive disorder by blood P$_4$concentration and ultrasonography improve reproduction management of HanWoo.

• Journal of Aquaculture
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2003

A new technique combining forced-feeding and dorsal aorta cannulation was developed to monitor concentration of nutritions in the blood circulation and their metabolites in rainbow trout. To study the effect of dorsal aorta cannulation on stress, 30 rainbow trout (523$\pm$5.4 g; Mean$\pm$SD) were divided into 6 groups of 5 individuals each. A group was anesthetized and blood samples were taken at 0, 3, 6, 12, 24 or 48 h after dorsal aorta cannulation. Hematocrit peaked at 6 h and returned to 0 values by 12 h after dorsal aorta cannulation. Plasma cortisol and glucose concentrations also peaked at 6 h and returned to 0 values by 48 h after dorsal aorta cannulation. Based on the plasma cortisol and glucose concentrations, the rainbow trout recovered from the operation of dorsal aorta cannulation within 48 h. To compare the patterns of plasma free amino acid concentrations after force-feeding in the fish with dorsal aorta cannulation, 5 dorsal aorta cannulated individuals (511$\pm$6.2 g) were kept in a cage. After 48 h starvation, they were anesthetized and blood samples were taken at 0, 4, 8, 12, 24, 36 or 48 h after forced-feeding. The concentration of all plasma free amino acids, except isoleucine, leucine, phenylalanine, and tryptophan, also peaked at 4 h and returned to 0 values by 24 h after feeding. The combined technique allows forced-feeding and repeated sampling of blood in rainbow trout with minimum stress.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.318-323
• /
• 1992

Following seven new nucleophilic adducts of sulfilimine compounds were prepared by the addition of 1-methyl-5-mercapto-1,2,3,4-tetrazole to vinylsulfilimine derivatives; S-Phenyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine, S-p-tolyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine, S-m-tolyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine, S-p-chlorophenyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine, S-p-bromophenyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine, S-p-methoxyphenyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine and S-p-nitrophenyl-S-2-(1-methyl-1,2,3,4-tetrazole-5-thio)-ethyl-N-p-tosylsulfilimine. The structures of these adducts were confirmed by elemental analyses, MP, UV, IR-and NMR-Spectra.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.393-397
• /
• 1994

The study was carried out to develop the powdered smoked-dried anchovy products as a natural flavoring substance. The processing conditions, chemical and taste compounds of products were as follows: The raw anchovy were washed, and then boiled 5 minutes in $5{\sim}6%$ NaCl and 1.0% sodium erythorbate solution. Boiled anchovy were smoked in smoking house at $40^{\circ}C$ for 4 hours as the first stage, and then increased temperature up to $80^{\circ}C$ as the second stage, and finally smoked 8 hrs at $80^{\circ}C$ to maintain the moisture content between 9 and 10 percent. The smoked-dried anchovy were pulverized and screened to be 50 mesh of particle size, and finally packed in PET/Al/CPP film bag. The moisture, crude lipid content and salinity of powdered smoke-dried anchovy were 9.4%, 9.6% and 6.9%, respectively. Fatty acid composition of product was mainly consisted of polyenes (43.4%) such as 22 : 6 and 20 : 5, followed by saturates (36.9%), monoenes (19.7%). The principal taste compounds of product were IMP, 466.5 mg/100g; free amino acids such as His, Tau, Pro, Lys, Ala and Glu, 1179.2 mg/100g; non-volatile organic acids such as lactic acid and succinic acid, 617.9 mg/100g; total creatinine, 595.9 mg/100g; small amount of betaine and TMAO. To make a instant soup, it was desirable for taste of products that powdered smoked-dried anchovy were mixed with 20% salt, 4.0% sugar, 3.0% MSG, 1.0% onion powder, 1.0% garlic powder and 1.0% black pepper.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.91-96
• /
• 2000

The cultural and physiological conditions for the T-2 toxin [4,15-diacetoxy-8-(3-mety1butyloxy)-12,13- epoxy-trichothec-9-en-3-01, $C_{24}H_{30}O_9$] production by Fusarium spp. were studied. Thin layer chromatography (TLC) assay and the microbiological assay uslng Rhodotomla rubra were used to quantitate tbe T- 2 toxin. Among the four strains of Fusarium spp., F tn'cinctum NRRL 3299 was best for T-2 toxin production. In solid culture, white com grit medium was best for T-2 toxm production. Temperature played a critical role in the production of T-2 toxin. T-2 toxin production was favored by long duration of low-temperature incubation. The growth and toxin production were relatively high on galactose, fructose, glucose, and sucrose media, when each was used as a sole carbon source, and relatively low on sorbitol, glycerol, and lactose media. For nitrogen sources, $NH_4^(+) and NO_3^{-}were used well as a sole nitrogen source, but $NO_2^-$ was not used. Initial pH and speed of shaker also affected the production of T-2 toxin. From temperature shifting experiment, it is clear that T-2 toxin metabolic pathway is regulated by temperature-dependent enzyme depression or enzyme induction system.