• Korean Journal of Food Science and Technology
• /
• v.3 no.1
• /
• pp.64-67
• /
• 1971

The Manufacturing conditions of Chungkukjang were investigated by the use of the soy beans, salt (NaCl) and Bacillus subtilis S.P. In the studies of Chungkukjang Meju protease activity, total acid, free amino nitrogen, optimum times of fermentation and the maturity of Meju were shown the reasonable conditions each at 54 hrs, 24 hrs, between 36 to 42 hrs, between 36 to 42 hrs and at 5 days from the beginning of fermentation. In the studies on the Chungkukjang (Sauce made by meju) the increased amount of free amino nitrogen and total acid were proportional to the increased contents of moisture. The amount of the acid was increased rapidly for 20 day from the beginning and after it slowly. The appropriate content of moisture was 55% in the manufacturing of Chungkukjang.

• Corrosion Science and Technology
• /
• v.19 no.6
• /
• pp.326-336
• /
• 2020

Galvalume steel (GL) is widely used in marine and industrial environments. It is characterized by better corrosion resistance than carbon steel. However, corrosion and economic losses may occur as the usage time is increased. Therefore, in this study, an outdoor exposure test of GL for 36 months was conducted across six regions of Korea. Parameters such as corrosion rate, chrominance (color, chroma, and brightness), glossiness, and surface appearance were analyzed. The results showed no significant change in appearance, and the initial corrosion rate was large, but a tendency to decrease with time was observed. Increased outdoor exposure time led to increase in the level of corrosion products. In the case of coastal areas where S, Cl, and other elements were detected, a relatively high decrease in Zn content was observed. Al forms a protective oxide film and exists in the coating layer, but Zn dissolves due to its chemical activity and low potential.

• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.173-182
• /
• 2003

A prototype liquid scillatillator system for measurement of multiple beta-labeled mixtures was developed and its characteristic was investigated. The signal processing system consists of two photomultiplier tubes and the coincident count circuit. The characteristic of the system was analyzed using 4 beta-labeled samples $(^3H,\;^{14}C,\;^{36}Cl\;and\;^{90}Sr)$. Beta spectra from the samples were obtained without radiation shielding, and the detection limits for each nuclides were estimated based on the spectra. The estimated detection limits were compared to the legal regulation values. It is found that the liquid radioactive nuclides are detectable well below the legal regulation values.

• Microbiology and Biotechnology Letters
• /
• v.31 no.3
• /
• pp.224-229
• /
• 2003

A keratinolytic protease was purified from the culture medium of Pseudomonas sp. KP-364 by use of an assay of the hydrolysis of feather keratin. Membrane ultrafiltration and DEAE-cellulose ion-exchange resin and Sephadex G-150 gel chromatographies were used to purify the enzyme. The specific activity of the purified keratinolytic protease relative to that in the original medium was approximately 72-fold high. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Sephadex G-150 chromatography indicated that the purified keratinolytic protease is monomeric and has a molecular weight of 36 kDa. The optimal pH and temperature of the keratinolytic protease activity were 6.6 and 37 C, respectively, and the keratinolytic protease was relatively stable at pH value from 3.0 to 10.0 at 37 C for 1hour. The keratinolytic protease was inhibited by EDTA and EGTA, indicating that the keratinolytic protease was a kind of metalloprotease that require Li+ for cofactor.

• Environmental Engineering Research
• /
• v.20 no.3
• /
• pp.246-253
• /
• 2015

The effects of carbon-to-nitrogen (C/N) ratio in simulated rice straw hydrolysates using glucose and ammonium chloride on polyhydroxyalkanoates (PHA) accumulation by Cupriavidus necator was investigated. In general, PHA accumulation rate was higher under higher degrees of N-deficient conditions (e.g., C/N ratio of 360:1) than lower degrees of N-deficient conditions (e.g., C/N ratio of 3.6:1 and 36:1). Also, the most PHA accumulation was observed during the first 12 h after the PHA accumulation initiation. This study showed that the similar PHA accumulation could be achieved by using different accumulation periods depending on C/N ratios. N source presence was important for new cell production, supported by approximately ten times greater PHA accumulation under the N-deficient condition ($NH_4Cl$ 0.01 g/L) than the N-free (without $NH_4Cl$) condition after 96 h. C/N ratio of the rice straw hydrolysate was approximately 160:1, based on the glucose content, and this accumulated $0.36{\pm}0.0033g/L$ PHA with PHA content of $21{\pm}3.1%$ after 12 h. Since external C or N source addition for C/N ratio adjustment increases production cost, an appropriate accumulation period may be used for PHA accumulation from organic wastes, based on the PHA accumulation patterns observed at various C/N ratios and C and N concentrations.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.9
• /
• pp.604-608
• /
• 2014

This study investigated influence of dissolved organic nitrogen (DON) in natural organic matter (NOM) on the formation of organic chloramines upon monochloramination. Ratios of dissolved organic carbon (DOC) to DON of the 16 NOM isolates ranged from 7 to 47 mg-C/mg-N. Levels of organic chloramines maxed in 24 hours at $0.16mg-Cl_2/mg-N$ in average. The yields were relatively lower, but decay of organic chloramines were slower than those upon chlorination. Organic chloramines formed upon monochloramination decreased by 56% in average in 120 h. NOM with lower DOC/DON ratios formed more organic chloramines. NOM fractions such as hydrophobic, hydrophilic, transphilic, and colloidal did not significantly impact formation of organic chloramines. As the monochloramine doses increased, more organic chloramines were produced ($R^2=0.91$). Overestimation of disinfection capacity due to the formation of organic chloramines may not be concerns for monochloramine systems since only 6% of monochloramine could be converted to organic chloramines upon monochloramination of NOM.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.262-267
• /
• 2012

2-(1,3,3-Trimethyl-6-azabicyclo [3,2,1]-oct-6-yl)-4,5-dihydro-1,3-oxazoline (TAO) was polymerized at several conditions to clarify the influence of initiators, alkyl halide ($PhCH_2Br$, $PhCH_2Cl$, MeI) and sulfonate (MeOTf). The reactions were conducted at $100^{\circ}C$ for 24 h. The resultant polymer forms several kinds of structures with different combination of initiators. The sole MeOTf initiator caused chain transfer reaction to form the one-order structure for which the resultant polymer exclusively formed pendant structure, while alkyl halide and MeOTf formed two kinds of structures, pendant and main chain, which is caused by partly-proceeded double isomerization polymerization by highly reactive nucleophilic counter anion of halogen. Merrifield polymer was also utilized as an intiator and copolymerized with TAO, which produced a graft structure.

• Journal of Environmental Health Sciences
• /
• v.36 no.4
• /
• pp.313-322
• /
• 2010

The aim of this research was to apply experimental design methodology to optimization of conditions of electrochemical oxidation of Rhodamine B (RhB) and N, N-Dimethyl-4-nitrosoaniline (RNO, indicative of the OH radical). The reactions of electrochemical oxidation of RhB degradation were mathematically described as a function of the parameters of current ($X_1$), NaCl dosage ($X_2$) and pH ($X_3$) and modeled by the use of the central composite design. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the removal efficiency of RhB and RNO and test variables in a coded unit: RhB removal efficiency (%) = $94.21+7.02X_1+10.94X_2-16.06X_3+3.70X_1X_3+9.05X_2X_3-{3.46X_1}^2-{4.67X_2}^2-{7.09X_3}^2$; RNO removal efficiency (%) = $54.78+13.33X_1+14.93X_2- 16.90X_3$. The model predictions agreed well with the experimentally observed result. Graphical response surface and contour plots were used to locate the optimum point. The estimated ridge of maximum response and optimal conditions for the RhB degradation using canonical analysis was 100.0%(current, 0.80 A; NaCl dosage, 2.97% and pH 6.37).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.6
• /
• pp.964-969
• /
• 1995

For the effective utilization of cellulosic biomass, conidial protoplast fusion between Aspergillus niger MAN-831(${\beta}-glucosidase$) and A. wentii MAW-538(CMCase and avicelase), which produced potently cellulolytic enzymes was carried out. Optimal conditions for formation and regeneration of protoplast were conidiospore age-5 dyuas. $2-DG-30\mu\textrm{g}/ml$, preincubation time-4 hours, osmotic stabilizer-0.7M KCl, novozyme(7mg/ml)＋driselase(2.5mg/ml) and reaction time of enzyme-5 hours. Optimal conditions for protoplast fusion were obtained by treatment of protoplasts with 15mM CaCl2 and 25% polyethylene glycol 4000(pH 6~7) as fusogenic agent at $36^{\circ}C$ for 25~30 minutes. The frequency was then $7.94{\times}10^{-4}$. CMCase, avicelase and ${\beta}-glucosidase$ activity of fusant F-208 strain was 1.5, 1.3, 1.2 times higher than those of parental strains, respectively.

• Journal of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.194-200
• /
• 1983

Effect of metallic salts added to the ${\alpha}-Fe_2O_3-HCl\;or\;{\alpha}-Fe_2O_3-H_2SO_4$ reaction systems were investigated by colorimetric and gravimetric determinations. While reductive salts exhibited remarkably enhanced reaction rate, non-reductive salts showed inhibitive results. We supposed that the improvement of dissolution rate of ${\alpha}-Fe_2O_3$ by the addition of $FeCl_2$, a reductive salt, to the ${\alpha}-Fe_2O_3-HCl$ system can be attributed to the formation of chloro-bridge between $Fe^{3+}\;and\; Fe^{2+}$, and therefore some partial electronic charge transfer from $Fe^{2+}\;to\;Fe^{3+}$ on the surface of ${\alpha}-Fe_2O_3$ will be easily achieved through the bridged bond. The transferred charge to the surface will reduce the positive charge of initial $Fe^{3+}$, and also result to reduce the lattice energy of that site. Assuming tothat there is a linear relationship between the lattice energy change and the change of activation energy of the reaction system, the transferred partial electronic charge to $Fe^{3+}$ of ${\alpha}-Fe_2O_3$ surface was calculated to be ca. 0.36e.