• Title/Summary/Keyword: $^{244}Cm$

Search Result 155, Processing Time 0.028 seconds

Establishment of Quality Control System for Angiographic Unit (IVR장치의 성능 평가 기준 개발)

  • Kang, Byung-Sam;Son, Jin-Hyun;Kim, Seung-Chul
    • The Journal of the Korea Contents Association
    • /
    • v.11 no.1
    • /
    • pp.236-244
    • /
    • 2011
  • Recently, the number of interventional procedures has increased dramatically as an alternative of invasive surgical procedure. The need for the quality control program of the angiographic units has also increased, because of concerns about the increased patient dose and the importance of image quality of angiographic units for the successful procedures. The purpose of this study was to propose an optimal guideline for the quality control program of the angiographic units. We reviewed domestic and international standards about medical imaging system and we evaluated the quality of 61 angiographic units in Korea with the use of NEMA 21 phantom. According to the results of our study, we propose a guideline for the quality control program of the angiographic units. Quality control program includes tube voltage test, tube current test, HVL test, image-field geometry test, spatial resolution test, low-contrast iodine detectability test, wire resolution test, phantom entrance dose test. Proposed reference levels are as follows: PAE < $\pm$ 10% in tube voltage test, PAE < $\pm$ 15% in tube current test, minimum 2.3 mmAl at 80 kVp in HVL test, minimum 'acceptable' level at image-field geometry test, 0.8 lp/mm for detector size of 34-40cm, 1.0 lp/mm for detector size of 28-33cm, 1.2 lp/mm for detector size of 22-27cm in spatial resolution test, minimum 200mg/cc in low contrast iodine detectability test, phantom entrance dose should be under 10R/min, 0.012 inch wire should be seen at static wire resolution test, and 0.022 inch wire should be seen at moving wire resolution test.

Studies on the Physiological Characteristics of (Cervus e. canadensis) Velvet Antler in Elk

  • Jeon, Byong-Tae;Thomas, David G.;Cheong, Sun-Hee;Kim, Myeong-Hwa;Kim, Sung-Jin;Sung, Si-Heung;Park, Pyo-Jam;Park, Jae-Hyun;Moon, Sang-Ho
    • Journal of Animal Science and Technology
    • /
    • v.52 no.3
    • /
    • pp.237-244
    • /
    • 2010
  • In order to investigate the physiological properties of velvet antler of elk (Cervus e. canadensis) raised in Korea, antlers (n=378) were collected from deer in 8 provinces including Gyeonggi-do (n=53), Gangwon-do (n=49), Chungcheongbuk-do (n=62), Chungcheongnam-do (n=68), Jeollabuk-do (n=52), Jeollanam-do (n=15), Gyeongsangbuk-do (n=30) and Gyeongsangnam-do (n=49). The exterior characteristics (weight, length, girth and crown) of all antlers were measured, and 18 antler samples were randomly selected for measurement of interior characteristics such as specific gravity, capacity and diameter of cross section. The mean antler weight, length of the main beam and mean length of upper section were $4.87{\pm}1.79\;kg$, $83.7{\pm}13.2\;cm$ and $40.6{\pm}11.4\;cm$, respectively. Mean girth of the top, middle and base of the main beam were $27.1{\pm}5.9\;cm$, $22.1{\pm}3.6\;cm$ and $22.9{\pm}3.6\;cm$ respectively, indicating a slight narrowing in the middle of the antler. In each of the tines, the girth at the base was markedly thicker compared to the top. The depth of the crown at the top of the antler, and the average number of crowns and tines were $14.1{\pm}7.0\;cm$, $2.1{\pm}0.6$ and $3.0{\pm}0.5$, respectively. Although there was no significant difference in mean specific gravity between top and base, mean specific gravity of main beam tended to increase from top to base of the antler with decreasing capacity. Additionally, the inner diameter of the base of the antler was significantly reduced compared to that of the top, indicating a greater integumental thickening due to mineralization. Information on the morphological and physiological properties of elk antlers is scarce. Therefore, these results may be useful in providing basic information for the physiological properties of antler, and encourage further studies on antler morphology in other deer species showing species specific differences.

Influence of Water Stress on Growth and Yield in Safflower(Cartamus tinctorius L.) (단수 시기가 홍화의 생육과 수량에 미치는 영향)

  • Kim, Se-Jong;Park, Jun-Hong;Kim, Jae-Chul;Park, So-Deuk;Song, Kwan-Chul
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.39 no.5
    • /
    • pp.303-306
    • /
    • 2006
  • This experiment was investigated the influence of water stress in growth and yields of safflower. The water stress treatment was early growth stage(Mar. 20~Apr. 18), middle growth stage(Apr. 29~May 28) and last growth stage(Jun. 8~Jul. 7) for 30 days, respectively. Stem length of plant was 127 cm in normal irrigation(control) state and that of growth middle stage at drought state was 96 cm, to be shorted more 31 cm than that of normal irrigation state, also other growth rate of plant was decreased, relatively. Number of effective flower bud per $m^2$ was 224 ea in normal irrigation state, 114 ea in growth middle stage at drought state. Yield of seed at drought state decreased 37% and 13% in growth middle stage(222 kg/10a) and last stage(307 kg/10a) than 353 kg/10a in normal irrigation state. According to the result, it could be estimated that optimum irrigation time(0.05 MPa) was 23days after non-rainfall at early growth stage(from sowing seed time to 30 days after sowing seed), 10 days in middle growth stage(41-70 days after sowing seed) and 9 days in last growth stage(81-110 days after sowing seed), to prevent the damage of drought.

Effects of Cutting Condition on Rooting and Growth of Cut Flower in Plug Cutting of Dendranthema grandiflorum 'Shinma' (국화 '신마'의 플러그 삽목시 삽수조건이 발근 및 절화생육에 미치는 영향)

  • Roh, Yong Seung;Yoo, Yong Kweon
    • FLOWER RESEARCH JOURNAL
    • /
    • v.18 no.4
    • /
    • pp.244-250
    • /
    • 2010
  • This study was carried out to examine the effect of cutting condition on rooting and their subsequent growth of cut flower in plug cutting of 'Shinma', one of autumn-flowering chrysanthemums. According to the results, cutting with four or six leaves was effective in shoot growth and rooting than any other treatments, and also the length and thickness of cut flower were increased. In case of cutting with leafless, it showed the poorest shoot growth among all of the treatments and there was no root. The weight of shoot was heavier than any other treatments in case of the length of cutting (5~7 cm). And the weight of root and its number were better than any other treatments, in treatment of the length of cutting (5 cm). The growth of shoot and rooting were enhanced by increasing the thickness of cutting. In case of thickness of cutting, the cutting (3.2 mm tnickenss) showed more favorable shoot length of cut flower than any other treatment. Therefore, it is recommended that the 5 cm long and 3.2 mm thick cuttings with four leaves are used to improve their rooting and subsequent growth in plug cutting of Dendranthema grandiflorum 'Shinma'.

Dosimetric Characteristics of Dual Photon Energy Using Independent Collimator Jaws (고에너지 선형가속기의 Independent Collimator를 이용한 비대칭 방사선 조사시 방사선량 결정에 미치는 요인에 관한 연구)

  • Kim Jeung-kee;Choi Young-Min;Lee Hyung-Sik;Hur Won-Joo
    • Radiation Oncology Journal
    • /
    • v.14 no.3
    • /
    • pp.237-244
    • /
    • 1996
  • Purpose : The accurate dosimetry of independent collimator equipped for 6MV and 15MV X-ray beam was investigated to search for the optimal correction factor. Materials and Methods : The field size factors, beam quality and dose distribution were measured by using 6MV, 15MV X-ray Field size factors were measured from $3{\times}3cm^2$ to $35{\times}35cm^2$ by using 0.6cc ion chamber (NE 2571) at Dmax. Beam qualities were measured at different field sizes, off-axis distances and depths. Isodose distributions at different off-axis distance using $10\times10cm^2$ field were also investigated and compared with symmetric field. Result: 1) Relative field size factors was different along lateral distance with maximum changes in $3.1\%$ for 6MV and $5\%$ for 15MV. But the field size factors of asymmetric fields were identical to the modified central-axis values in symmetric field, which corrected by off-axis ratio at Dmax. 2) The HVL and PDD was decreased by increasing off-axis distance. PDD was also decreased by increasing depth For field size more than $5{\times}cm^2$ and depth less than 15cm, PDD of asymmetric field differs from that of symmetric one ($0.5\~2\%$ for 6MV and $0.4\~1.4\%$ for 15MV). 3) The measured isodose curves demonstrate divergence effects and reduced doses adjacent to the edge close to the flattening filter center was also observed. Conclusion . When asymmetric collimator is used, calculation of MU must be corrected with off-axis and PDD with a caution of underdose in central axis.

  • PDF

Nutrient Uptake by Reeds Growing in Subsurface-flow Wetland Constructed to Purify Stream Water (하천수정화 여과습지에서 성장하는 갈대의 영양염류 흡수량)

  • Yang, Hongmo
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.9 no.1
    • /
    • pp.89-99
    • /
    • 2006
  • The growth and biomass of reeds(Phragmites australis) growing in a subsurface treatment wetland system were investigated from April 2003 to October 2003. Nitrogen(N) and phosphorous(P) concentrations in above-ground(AG) and below-ground(BG) tissues of reeds were examined and the removal rate of N and P by reeds were analyzed. The system, 29 m in length, 9 m in width and 0.65 m in depth, was constructed in June 2001 on a floodplain in the down reach of the Kwangju Stream in Korea in order to purify polluted water of the stream. A bottom layer of 45 cm in depth was filled with crushed granites(15~30 mm in diameter) and a middle layer of 10 cm in depth was filled with pea pebbles(10 mm in diameter). An upper layer of 5 cm contained course sand. Reeds were transplanted on the surface of the system, which were dug out of natural wetlands, and their shoots were trimmed 40 cm in height. The height and density of the shoots averaged 237.7 cm and 244.0 shoot/$m^2$, respectively, when the reeds grew fully. The maximum biomass of AG and BG tissues were 1,964 and 1,577 g/$m^2$, respectively, and the AG : BG ratio of biomass was 1.26. Mean AG and BG dry weights were recorded as 1,355 and 748 g/$m^2$, respectively. The AG and BG tissue concentrations of N averaged 12.37 and 10.01 mg/g, respectively, and those of P 2.37 and 2.03 mg/g, respectively. Inflow to the system averaged 40 $m^3$/day. The concentrations of total nitrogen(T-N) in influent and effluent were 8.4 mg/L and 3.2 mg/L, respectively, and those of total phosphorous(T-P) were 0.73 and 0.38 mg/L, respectively. The total removal of T-N and T-P by the system during the investigation period averaged 140.2 and 9.7 g/$m^2$, respectively, and the total uptake of N and P by the reeds were calculated as 24.39 and 4.73 g/$m^2$, respectively. Average removals of about 17% of N and about 49% of P by reeds were recorded. The N and P concentrations in AG tissues were significantly different among the three zones of the system:near to inflow(St1), in the middle of system(St2), and near to outflow(St3). The N and P concentrations in BG tissues were also significantly different among St1, St2 and St3. N and P concentrations in AG and BG tissues of reeds growing in St1 were higher than those in St2 and St3. The height and density of shoots of reeds in St1 were larger than those in St2 and St3. Significant amounts of N and P in the influent were taken up by reeds in St1.

Varietal Variations in Absolute Density of Rice Grain and Its Relations with Other Grain Characters (미립 절대밀도의 품종간 변이 및 몇가지 미립형질과의 관계)

  • Hee Jong, Koh;Mun Hue, Heu;Cheng Mo, Jiang
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.37 no.3
    • /
    • pp.244-249
    • /
    • 1992
  • To investigate the varietal variations in absolute density of milled rice grain and its relations with other grain characters, the 235 rice varieties which consist of 30 Tongil type rices, 72 Japonica rices and 133 Indica rices were tested on grain size, volume, hardness, chalkiness and 1000 grains weight of brown rice, ADV, amylose content, starch composition on SEM and absolute density of milled rice grain using completely ripened grains. Average absolute density of milled rice grain was 1.496g / cm$^3$ in Tongil type rices, 1.506g / em in Japonica rices, and 1.500g / cm$^3$ in Indica rices. It was correlated positively with days to heading and grain hardness, and negatively with chalkiness, volume, grain weight and grain length of brown rice. Regression analysis indicated that grain volume and weight were the major characters affecting the density. However, since the absolute density of milled rice grain did not show great varietal variations it might not seem important as one of the characters contributing to the grain yield, while it could be a factor affecting the grain quality because there were definite varietal differences even though small. The microscopic feature of starch composition on SEM revealed differences between clear and chalky parts of the grain in shape and compactness of starch composition but did not discriminate between high and low-density grains.

  • PDF

Holographic Data Grating Formation of As40Ge10Se15S35 Single Layer, Ag/As40Ge10Se15S35 Double Layer and As40Ge10Se15S35/Ag/As40/Ge10Se15S35 Multi-layer Thin Films with the DPSS Laser (DPSS Laser에 의한 As40Ge10Se15S35, Ag/As40Ge10Se15S35와 As40Ge10Se15S35/Ag/As40/Ge10Se15S35박막의 홀로그래픽 데이터 격자형성)

  • Ju, Long-Yun;Chung, Hong-Bay
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.20 no.3
    • /
    • pp.240-244
    • /
    • 2007
  • We investigated the diffraction grating efficiency by the Diode Pumped Solid State(DPSS 532 nm) laser beam wavelength to improve the diffraction efficiency on $As_{40}Ge_{10}Se_{15}S_{35},\;Ag/As_{40}Ge_{10}Se_{15}S_{35}$ and $As_{40}Ge_{10}Se_{15}S_{35}/Ag/As_{40}Ge_{10}Se_{15}S_{35}$ thin film. Diffraction efficiency was obtained from DPSS laser, used (P:P)polarized laser beam on each thin films. As a result, for the laser beam intensity in $0.24mW/cm^2$, single $As_{40}Ge_{10}Se_{15}S_{35}$ thin film shows the highest value of 0.161% diffraction efficiency at 300 s and for laser beam intensity in $2.4mW/cm^2$, it was recorded with the fastest speed of 50 s(0.013%), which the diffraction grating forming speed is faster than that of $0.24mW/cm^2$ beam. $Ag/As_{40}Ge_{10}Se_{15}S_{35}$ double layer and $As_{40}Ge_{10}Se_{15}S_{35}/Ag/As_{40}Ge_{10}Se_{15}S_{35}$ multi-layered thin film also show the faster grating forming speed at $2.4mW/cm^2$ and higher value of diffraction efficiency at $0.24mW/cm^2$.

Spectrophotometric Determination of Lanthanide Ions by Flow Injection Analysis (Flow Injection Analysis에 의한 란탄족 이온들의 흡광광도 정량)

  • Kang, Sam-Woo;Cho, Kwang-Hee
    • Analytical Science and Technology
    • /
    • v.9 no.3
    • /
    • pp.244-252
    • /
    • 1996
  • Spectrophotometric properties of lanthanide complexes with methylthymol blue(MTB) and cetyltrimethylammonium bromide(CTAB) were studied and also lanthanide(III) ions were determined by flow injection analysis on the base of the above results. The absorption maxima of lanthanide(III)-MTB complexes in the presence of CTAB are 635nm with molar absorptivity of $4.51{\sim}6.11{\times}10^4Lmol^{-1}cm^{-l}$ at pH 5.8. The mole ratio of lanthanide(III) complexes with MTB is 1:2 in the presence of CTAB. The calibration curves of lanthanide(III) ions obey the Beer's law in the range of 0.1 to 0.4ppm under the optimum condition. The samples throughput was ca. $60hr^{-1}$. The interfering effect of some cations and anions was investigated. The ligand anions such as tartrate and citrate, many transition and rare earth elements interfered severely and must be removed before the determination of lanthanide(III) ions.

  • PDF

The First Neurosurgical Analysis of 8 Korean Children with Sotos Syndrome

  • Lim, Jae-Joon;Yoon, Soo-Han
    • Journal of Korean Neurosurgical Society
    • /
    • v.44 no.4
    • /
    • pp.240-244
    • /
    • 2008
  • Objective : Sotos Syndrome is characterized by macrocephaly, overgrowth, and developmental delay, and more than 300 patients have been reported worldwide to date. The authors reviewed the clinical characteristics of 8 patients with Sotos Syndrome in Korea for a new understanding and treatment strategies. Methods : The medical records of a total of eight Korean children with Sotos Syndrome were reviewed. All patients underwent developmental checkup, lumbar punctures for measurement of intracranial pressure (ICP), brain and spine magnetic resonance imaging and computerized tomography. Results : All 8 patients showed macrocephaly and the characteristic craniofacial features of Sotos Syndrome. Other clinical characteristics shown were overgrowth (7/8), developmental delay (7/8), congenital heart defect (3/8), flat foot (8/8), scoliosis (4/8), spina bifida (8/8), hydrocephalus (4/8), cavum vergae (3/8), and increased subdural fluid collection (5/8). Mean ICP measured via lumbar puncture was $27.35{\pm}6.25\;cm$ $H_2O$ (range 20 to 36 cm $H_2O$). Two patients received ventriculo-peritoneal shunt, and 1 patient underwent subduro-peritoneal shunt with improvement. Spinal orthosis was applied to 4/5 patients with scoliosis and 4/8 children with flat foot were provided with foot orthosis. Conclusion : In this first Korean study of 8 Sotos Syndrome patients we demonstrated the presence of spina bifida and increased ICP, which had not been previously described. The authors therefore suggest that all patients with Sotos Syndrome should undergo examination for the presence of spina bifida, and that shunt procedures would improve development and alleviate clinical symptoms.