• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.2
• /
• pp.237-244
• /
• 2000

This study was carried out on 91 obese women who satisfied both of the conditions for obesity: over 1.6 in Rohrer index and over 90cm in bust girth. The purpose of this study was to analyze and classify the lower body of obese women and find out their respective characteristics. Twenty seven measurement items(21 direct measurement items and 6 indirect measurement items) were used for factor-analysis and cluster-analysis. In the study of lower body type, 7 factors were as a result of factor analysis and those factors were comprise 75.9% of total variance. Lower bodyshape were classified 3 types according to the cluster analysis. Type 1 was protrude of the hip, type 2 was short leg and protrude of the abdominal region and type 3 was obese of hip and long leg.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.769-774
• /
• 1996

DUPIC 공정은 재처리공정과는 달리 공정의 전ㆍ후를 통하여 사용후핵연료의 양이 변하지 않기 때문에 시설이 원활히 운전되기 위해서는 사용후핵연료가 결손 또는 전용되지 않았음을 증명할 수 있어야 한다. 따라서, 핵투명성(nuclear transparency)을 보장할 수 있는 DUPIC 핵연료 보장조치용 비파괴측정 장치의 개발이 요구되었으며 $^3$He tube, 폴리에칠렌(CH$_2$)감속재, 텅스텐 차폐체 그리고 PSR(portable shift register) 등으로 구성된 측정 시스템을 제작하였다. 본 장치를 사용하여 사용후핵연료에서 검출되는 중성자중에서, $^{244}$ Cm의 자발핵분열중성자 수를 분석할 수 있으며 이를 이용하여 사용후핵연료를 계량관리 할 수 있다. 현재 측정시스템에 대한 성능시험등을 수행하고 있는 중이며 향후 DUPIC 연구용 고준위방사성물질취급시설(hot-cell)에 설치할 예정이다.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.4
• /
• pp.237-244
• /
• 2018

Objective: Flat-footed people struggle with excessive ankle joint motion during walking and running. This study aimed to investigate the effects of customized three-dimensional 3D-printed insoles on the kinematics of flat-footed people during daily activities (walking and running). Method: Fifteen subjects (height, $169.20{\pm}2.61cm$; age, $22.87{\pm}8.48years$; navicular bone height, $13.2{\pm}1.00mm$) diagnosed with flat feet in a physical examination participated in this study. Results: The customized 3D-printed insoles did not significantly affect 3D ankle joint angles under walking and running conditions. However, they shifted the trajectory of the center of pressure (COP) laterally during fast walking, which enhanced the load distribution on the foot during the stance phase. Conclusion: The customized 3D-printed insoles somewhat positively affected the pressure distribution of flat-footed people by changing the COP trajectory. Further research including comparisons with customized commercial insoles is needed.

• Parasites, Hosts and Diseases
• /
• v.38 no.4
• /
• pp.237-244
• /
• 2000

Although oncospheres of Taenia saginata asiatica can develop into cysticerci in immunodeficiency, immunosuppressed, and normal mice, no detailed information on the development features of these cysticerci from SCID mice is available. In the present study, the tumor-like cyst was found in the subcutaneous tissues of each of 10 SCID mice after 38-244 days inoculation with 39,000 oncospheres of T. s. asiatica. These cysts weighed 2.0-9.6 gm and were 1.5-4.3 cm in diameter. The number of cysticerci were collected from these cysts ranged from 125 to 1,794 and the cysticercus recovery rate from 0.3% to 4.6%. All cysticerci were viable with a diameter of 1-6 mm and 9 abnormal ones each with 2 evaginated protoscoleces were also found. The mean length and width of scolex, protoscolex, and bladder were $477{\;}{\times}{\;}558,{\;}756{\;}{\times}{\;}727,{\;}and{\;}1,586{\;}{\times}{\;}1,615{\;}$\mu\textrm{m}$, respectively. The diameters of suckers and rostellum were $220{\mu\textrm{m}}{\;}and{\;}70\mu\textrm{m}$, respectively All cysticerci had two rows of rostellar hooks. These findings suggest that the SCID mouse model can be employed as a tool for long-term maintenance of the biological materials for advanced studies of immunodiagnosis, vaccine development, and evaluation of cestocidal drugs which would be most benefit for the good health of the livestocks.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.244.1-244.1
• /
• 2013

The p-type GaN which act as a hole injection layer in GaN-based LEDs has fundamental problems. The first one arises from the difficulty in growing a highly doped p-GaN (with a carrier concentration exceeding ~1018 $cm^{-3}$). And the second one is the absence of appropriate metals or conducting oxides having a work function that is larger than that of p-type GaN (7.5 eV). Moreover, the LED efficiency is decreases gradually as the injection current increases (the so-called 'efficiency droop' phenomenon). The efficiency droop phenomenon in InGaN quantum wells (QWs) has been a large obstacle that has hindered high-efficiency operation at high current density. In this study, we introduce the new approaches to improve the light-output power of LEDs by using graphene oxide sheets. Graphene oxide has many functional groups such as the oxygen epoxide, the hydroxyl, and the carboxyl groups. Due to nature of such functional groups, graphene oxide possess a lot of hole carriers. If graphene oxide combine with LED top surface, graphene oxide may supply hole carriers to p-type GaN layer which has relatively low free carrier concentration less than electron concentration in n-type GaN layer. To prove the enhancement factor of graphene oxide coated LEDs, we have investigated electrical and optical properties by using ultra-violet photo-excited spectroscopy, confocal scanning electroluminescence microscopy.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.2
• /
• pp.240-244
• /
• 1997

This study was conducted in North Sulawesi, Indonesia to identify the factors affecting reproductive efficiency and to determine the contribution of each factor in reproductive efficiency of Indonesian native cows. Records of reproductive efficiency, body size (hip height, body weight, body length, heart girth) as well as age on one hundred and sixty seven Indonesian native cows (seventy six cows of the Bali breed and ninety one cows of the synthetic breed from unknown proportion of th Madura, the Sumba and the Ongole breeds) of 58 farmers were available in this research. The data were analyzed by covariance analysis using SAS package including reproductive efficiency as a dependent variable and breed, body size (hip height, body weight, body length, heart girth) and age of cows as independent variables. The contribution of each independent factor to dependent variable was estimated as the percentage of the sum of square in the corrected total sum of squares. The results showed that body weight and body size of cows would be considered as th most important factors affecting reproductive efficiency of Indonesian native cows. Therefore, the reproductive efficiency could be increased by 1) using cows that reached a target weight of at least 250 kg, 2) using cows with relatively well developed height at hip of at least 117 cm, heart girth of at least 150 cm, and body length of at least 125 cm, 3) keeping breeding cows that reach a target age of 24 months old with the maximum interval between postpartum and next breeding season of 90 days for each year, and 4) using good nutritional feeding to reach the optimum weight and body condition.

• Imaging Science in Dentistry
• /
• v.33 no.4
• /
• pp.239-244
• /
• 2003

Malignant fibrous histiocytoma (MFH) is a pleomorphic soft tissue sarcoma. Three cases of MFH were reported in our study. The first case involved in the right infratemporal fossa of a 32-year-old female was presented. MR imaging revealed a 5.0 × 3.3 cm soft tissue mass of inhomogeneous high signal intensity. The second case was found in the right hard palate of a 66-year-old male. CT demonstrated bone destruction and MR imaging showed a 4 × 4 cm sized soft tissue mass of heterogeneous high signal intensity. The final case was found in the left masticator space of a 37-year-old male. The CT image showed a large mass with massive bone destruction of the left mandibular ramus, while the MRI displayed a soft tissue mass, 8 cm diameter. Our cases exhibited the general features of MFH. MRI is essential in the imaging of MFH, namely to depict tumor borders and demonstrate relationships with adjacent structures.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.3
• /
• pp.236-244
• /
• 2014

This study considered a seagrass habitat in order to analyze the characteristics of a marine environment of seagrass located in the Seomjin river estuary, through an analysis of the distribution of the water depth, field observation, and three-dimensional numerical experiments using an EFDC model. The seagrass habitat was usually distributed at D.L(-) 0.5~0.0 m, and was hardly seen in the intertidal zone higher than that range. The distribution of the water temperature was within the range of $7.0{\sim}23.2^{\circ}C$, and the seagrass was demonstrated to have a strong tolerance to changes in the water temperature. In addition, the salinity distribution was found to be 27.2~31.0 psu, with suspended solids of 32.1 mg/L, which were higher than the previous research results (Huh et al., 1998), implying that there may be a reduction in the amount of deposits caused by the suspended solids. As for the sedimentary facies, they were comprised of 62.7% sand, 19.1% silt, and 18.2% clay, indicating that the arenaceous was superior and the sedimentary facies were similar to that of Dadae Bay. According to a numerical experiment, the maximum tidal current was 75 cm/s, while the tidal residual current was 10 cm/s, confirming that it sufficiently adapted to strong tidal currents. The erosion and deposition are predicted to be less than 1.0 cm/year. Thus, it is judged that the resuspension of sediments due to tidal currents and the changes in sedimentary facies are insignificant.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.3
• /
• pp.315-323
• /
• 2023

The maturity and spawning of the large yellow croaker Larmichthys crocea were investigated using samples randomly collected in the Jeju coastal area, Korea. We analyzed monthly changes in maturity stages, gonadosomatic index (GSI), and egg diameter. Additionally, we verified fecundity by size class and total length (TL) at sexual group maturity at 50%, 75%, and 97.5%, as well as by sex ratio (female vs. male). The overall sex ratio of females to males was 1:0.42. The GSI values showed a peak in October, but the spawning season, revealed by the microscopic analysis of gonadal tissue of L. crocea was from October 2021 to March 2022, with the main spawning period from October to November. The fecundity (F) of female L. crocea ranged from 39,232 eggs at 20 to 29.9 cm to 251,003 eggs at 50 to 59.9 cm, with the relationship between TL and F being 80.244TL-1641.6. In females, TL at 50%, 75%, and 97.5% maturity was 22.4, 24.3, and 29.0 cm, respectively.

• Journal of Life Science
• /
• v.22 no.2
• /
• pp.239-244
• /
• 2012

The purpose of this paper is to analyze the characteristics and chemical components of biosurfactant produced by Pseudomonas sp. G314. Pseudomonas sp. G314 was isolated from soil samples which were contaminated with oil in Daejon area. As such, it produced quality biosurfactant [23]. One type of biosurfactant was kept in a refrigerator, whereas another type of biosurfactant was kept in room temperature. The surface tension activities were then compared. As a result, the biosurfactant from Pseudomonas sp. G314 that was kept at room temperature was stable for 10 days, showing 26.2 dyne/cm of surface tension activity. This result was found to be similar to that of the refrigerator storage. The surface tension of batch culture was 25 dyne/cm, but the culture in the 5 l fermentor was 27 dyne/cm. Therefore, it can be suggested that the large-scale culture is feasible via the fermentor. Biosurfactant from Pseudomonas sp. G314 was estimated to be a kind of glycolipid because it dissolved in acetone and methanol much better than in benzene and toluene [23]. A spot was detected through the elution of silica gel column and the spread of TLC, and the Rf value was 0.58. This spot has a positive reaction with Bail's reagent and rhodamine 6G. Hence, we can conclude that biosurfactant from Pseudomons sp. G314 was a glycolipid containing carbohydrate and lipid.