• Toxicological Research
• /
• v.29 no.3
• /
• pp.211-215
• /
• 2013

The trace toxic metal copper was assayed using mercury immobilized on a carbon nanotube electrode (MCW), with a graphite counter and a reference electrode. In this study, a macro-scale convection motor was interfaced with a MCW three-electrode system, in which a handmade MCW was optimized using cyclic- and square-wave stripping voltammetry. An analytical electrolyte for tap water was used instead of an expensive acid or base ionic solution. Under these conditions, optimum parameters were 0.09 V amplitude, 40 Hz frequency, 0.01 V incremental potential, and a 60-s accumulation time. A diagnostic working curve was obtained from 50.0 to 350 ${\mu}g/L$. At a constant Cu(II) concentration of 10.0 ${\mu}g/L$, the statistical relative standard deviation was 1.78% (RSD, n = 15), the analytical accumulation time was only 60 s, and the analytical detection limit approached 4.6 ${\mu}g/L$ (signal/noise = 3). The results were applied to non-treated drinking water. The content of the analyzed copper using 9.0 and 4.0 ${\mu}g/L$ standards were 8.68 ${\mu}g/L$ and 3.96 ${\mu}g/L$; statistical values $R^2$ = 0.9987 and $R^2$ = 0.9534, respectively. This method is applicable to biological diagnostics or food surveys.

• Korean Journal of Crystallography
• /
• v.4 no.1
• /
• pp.1-5
• /
• 1993

The crystal structure of N-(2'-chloro-4'-vitrophenyl)-5-chlorosalicylamide( Niclosamide ) monohydrate has been determined from 1976 sig- nificant independent reflections collected on an automated CAD4 diffractometer using graphitemonochromated Mo-Ka radiation. The crystal is monoclinic, space group P211c, with unit cell dimensions, a=11.331 (3), b=16.964(2), c=7.347(4)A , P =98.20(3)° and Z=4 at T=293k. The structure was solved by direct method using seminvariants of ggg Parity group and refined by the full-matrix least-square method, resulting model with reliability factor, R=0.046. The feature of the molecule show planar structure in parallel to the ab crystal plane.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.2
• /
• pp.211-218
• /
• 2009

This paper presents a voltage and frequency controller (VFC) for a 4-wire stand-alone wind energy conversion system (WECS) employing an asynchronous generator. The proposed VF con-troller consists of a three leg IGBT (Insulated Gate Bipolar Junction Transistor) based voltage source converter and a battery at its DC bus. The neutral terminal for the consumer loads is created using a T-connected transformer, which consists of only two single phase transformers. The control algorithm of the VF controller is developed for the bidirectional flow capability of the active power and reactive power control by which it controls the WECS voltage and frequency under different dynamic conditions, such as varying consumer loads and varying wind speeds. The WECS is modeled and simulated in MATLAB using Simulink and PSB toolboxes. Extensive results are presented to demonstrate the capability of the VF controller as a harmonic eliminator, a load balancer, a neutral current compensator as well as a voltage and frequency controller.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.211-219
• /
• 2013

The purpose of this study is to propose the environmental planning guidelines of elementary school settings for a crime safety. The research methodologies To achieve the goal, the literature review analysis and the survey were used as main research methodologies. The survey is organized as follows. First, elementary education facilities were divided into 20 spaces based on the major space. Second, after analyzing the domestic and foreign CPTED Guidelines, elements of environmental planning were classified to fit in the space. Based on this, the expert survey was conducted. The results of this study are as follows; First, it is necessary to consider specific places such as 'toilets', 'parking lot', 'in-between space', 'main access road', 'sub-access road' and 'harmful facilities around school' for safer school environment. Second, it is significant to plan 'equipment facilities' and 'outdoor space in the school setting' with priority for elementary education environment. Third, environmental planning elements for safer elementary schools can be classified into 9 factors(types) including 'natural surveillance planning', 'territoriality reinforcement planning', 'mechanical surveillance planning', 'access control planning' and 'neighborhood reinforcement planning'. Forth, regarding 'indoor space', crime-free elementary school environment can be build through 'natural surveillance planning' and 'territoriality reinforcement planning'. Finally, regarding 'outdoor space', the crime can be prevented through 'natural surveillance planning' and 'access control planning'.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.211-218
• /
• 2012

Two experiment are planed to identify driver's safe driving behaviour by curve radius, road surface condition in curve section. At four-lane and two-lane road, conducted experiments are check on driver's feeling of safety that 30 subjects do not feel discomfort. And using the data from these experiments, this study compare physical speed (not slipping, fall our of the road) with safety driving speed(drivers felt a comfortable and safe speed) each curve radius and fiver road surface condition(drying, wet, rain, snow and ice). As a result, safe driving behaviour factors that are derived to curve radius of 100m units, five road surface conditions enable to represent quantitative analysis of driver's discomfort. This study will develop road design method and evaluation reflected ergonomic aspects.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.211-222
• /
• 2005

Results of 6 nights of CCD VR photometry of the nova-like variable V603 Aquilae (Nova Aquilae 1918) obtained at the Mallorcian 35-cm telescope in July 2004 are reported. The ephemeris for the superhump maximum is Max.HJD=2453213.60546(96)+0.14813(10)E. The waves with $3.^d9,\;1.^d4,\;0.^d135$ are statistically significant, which may be interpreted as the negative superhump-orbital, the beat periods (negative superhump- positive superhump) and the negative superhump with low amplitude, respectively. Another possible time-scale is $0.^d8,$ which has no coincidence with the beat periods. Quasi-periodic oscillations with an effective period of 18 minutes have been detected, which are close to 15.6 minutes reported by some authors. Their effective semi-amplitudes are $^m.045\;and\;0^m.051$ for V and R, respectively. This corresponds to the 0.12 mag excess in the color index V-R as compared with the mean color, which can be understood as the pulsed emission in the hotter inner parts of the accretion disk, similar to that observed in TT Ari and MV Lyr.

• Advances in biomechanics and applications
• /
• v.1 no.3
• /
• pp.211-225
• /
• 2014

The usual assumption that the increase of fractures in aging bone is due entirely to lower bone density is taken back with respect to the possibility that aging bone fractures result from a loss of stability, or buckling, in the structure of the bone lattice. Buckling is an instability mode that becomes likely in end-loaded structures when they become too slender and lose lateral support. The relative importance of bone density and architecture in etiology bone fractures are poorly understood and the need for improved mechanistic understanding of bone failure is at the core of important clinical problems such as osteoporosis, as well as basic biological issues such as bone formation and adaptation. These observations motivated the present work in which simplified adaptive-beam buckling model is formulated within the context of the adaptive elasticity (Cowin and Hegedus 1976, Hegedus and Cowin 1976). Our results indicate that bone loss activation process leads systematically to the apparition of new elastic instabilities that can conduct to bone-buckling mechanism of fracture.

• Structural Engineering and Mechanics
• /
• v.26 no.2
• /
• pp.211-229
• /
• 2007

An experimental investigation to determine the transfer length of a seven-wire prestressing strand in different concretes is presented in this paper. A testing technique based on the analysis of bond behaviour by means of measuring the force supported by the prestressing strand on a series of specimens with different embedment lengths has been used. An analytical bond model to calculate the transfer length from an inelastic bond stress distribution along the transfer length has been obtained. A relationship between the plastic bond stress for transfer length and the concrete compressive strength at the time of prestress transfer has been found. An equation to predict the average and both the lower bound and the upper bound values of transfer length is proposed. The experimental results have not only been compared with the theoretical prediction from proposed equations in the literature, but also with experimental results obtained by several researchers.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.211-220
• /
• 2007

This study aims at suggesting marketing policies for the postal business to accommodate itself to the rapidly changing business environment. Especially according to the development of Internet, the decrease of the market that is the basis of postal business enables the reason for the existence of postal business to be lost. In this environmental change, this article is a study that explained the survival policies of postal business in terms of marketing. This study, as a theoretical research, examined the current situations of postal business by means of the environment analysis of universal services and postal business, and as a practical research, this study suggested the new paradigm of postal business, the strengthened universal services, and the marketing policies in viewpoint of the diversified businesses by means of the practical investigation of the course of postal business focusing on the postal service users.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.271-274
• /
• 1999

We are investigating epitaxially grown YBa$_2Cu_3O_x$(123) on MgO single crystal by partial melting process for high power application. After fabricating of BaCuO$_2$(011), Y$_2BaCuO_5$(211) powder, we made YBa$_2Cu_3O_x$(123) Paste with just mixing of (211), (011) and CuO(001) powders. Screen printing method was used to coat YBa$_2Cu_3O_x$(123) paste on MgO single crystal. To reduce the reaction in low temperature, rapid heating was conducted at partial melting temperature. The film was analysed with the difference of cooling-rate, thickness, reaction temperature by XRD, SEM, in-plane alignment, out-of-plane alignment, temperature-resistivity characteristics.