• 미생물학회지
• /
• 제37권2호
• /
• pp.137-144
• /
• 2001

순천만 갯벌의 세균 군집의 다양성을 조사하기 위해 16S rDNA의 다양성을 조사하였다. 갯벌로부터 전체 핵산을 분리한 후, 세균에 상보적인 universal primer로 증폭된 16S rDNA로부터 클론 라이브러리를 만들었다. 총 111개의 클론으로부터 HaeIII를 이용하여 amplified rDNA restriction analysis (ARDRA)를 수행하고, Gelcompar II 프로그램을 이용하여 pattern을 clustering하였다. 111개의 클론 중 100가지의 서로 다른 RFLP type이 조사되었고, 이들 중 전체 클론 라이브러리를 대표할 수 있는 20개의 클론을 선별하여 부분적인 염기서열을 분석하여 세균 다양성을 분석하였다. 20개의 클론중에는 RDP와 GenBank에서 제공하는 small subunit RNA database와 동일한 클론은 존재하지 않았으며, 이미 알려진 배양 가능한 세균의 16S rRNA 염기서열과 비교 하였을때 77∼96.8%의 유사도를 보였다. 또한 이들 20개의 클론은 alpha-, delta-, gamma-Proteobacteria, low G+C Gram positive bacteria, high G+C Gram positive bacteria, Sphingobacteria (Cytophaga); Cyanobacteria (Chloroplast)등 주요한 7개 lineage에 속했으며, 클론들 중 Proteobacteria가 우점종을 차지하고 있었다.

• 센서학회지
• /
• 제10권6호
• /
• pp.328-337
• /
• 2001

수평 전기로에서 $CdGa_2Se_4$ 다결정을 합성하여 HWE 방법으로 $CdGa_2Se_4$ 단결정 박막을 반절연성 GaAs(100) 위에 성장하였다. $CdGa_2Se_4$ 단결정 박막은 증발원과 기판의 온도를 각각 $630^{\circ}C$, $420^{\circ}C$로 성장하였다. 10K에서 측정한 광발광 exciton 스펙트럼과 이중결정 X-선 요동곡선(DCRC)의 반치폭(FWHM)을 분석하여 단결정 박막의 최적 성장 조건을 얻었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293K에서 각각 $8.27{\times}10^{17}/cm^3$, $345\;cm^2/V{\cdot}s$였다. 광전류 봉우리의 10K에서 단파장대의 가전자대 갈라짐(splitting)에 의해서 측정된 ${\Delta}Cr$ (crystal field splitting)은 106.5 meV, ${\Delta}So$ (spin orbit splitting)는 418.9 meV였다. 10K의 광발광 측정으로부터 고품질의 결정에서 볼 수 있는 free exciton 과 매우 강한 세기의 중성 주개 bound exciton등의 피크가 관찰되었다. 이때 중성 주개 bound exciton의 반치폭과 결합 에너지는 각각 8 meV와 13.7 meV였다. 또한 Haynes rule에 의해 구한 불순물의 활성화 에너지는 137 meV 였다.

• 인간식물환경학회지
• /
• 제24권2호
• /
• pp.137-152
• /
• 2021

Background and objective: This study was carried out to investigate and analyze the preference for plant fragrance and the psychological effects of a agro-healing activity in 101 firefighters aged 39.71 ± 10.94. Methods: For the psychological evaluation, post-traumatic stress symptoms, Korean occupational stress scale short form (KOSS-SF), emotional intelligence, and job satisfaction were surveyed on the Likert scale. For the preference for plant fragrances, 20 ㎕ of commercially available essential oils from four plant species (Mentha spp., Lavandula spp., Citrus limon, C. sinensis) were absorbed into each test paper and provided to the participants. Results: The rate of post-traumatic stress symptoms was high at 37.6% of the firefighters surveyed.. C. limon fragrance had the highest preference among the four plant fragrances, followed by C. sinensis > Mentha spp. > Lavandula spp. with statistically significant difference (F = 14.256, p < .001). The lower their age, income, and position, and higher the education level, the higher the preference for plant fragrances. And the administrative group had higher preference for plant fragrances than field group. In addition, as a result of examining the correlation between job satisfaction, preference for plant fragrance, post-traumatic stress, emotional intelligence, and job stress for fire-fighters, the higher the job satisfaction, the higher the fragrance preference and emotional intelligence, and the lower the post-traumatic stress and job stress. Conclusion: Therefore, installing a garden using botanical fragrances at workplaces that firefighters can easily access will improve job satisfaction and relieve stress. It can be concluded that applying the fragrance of plants to the healing farming activities at the fire-fighter's workplace can increase the usefulness of the healing activities.

• 열처리공학회지
• /
• 제21권3호
• /
• pp.137-143
• /
• 2008

Effect of quenching medium on the mechanical properties of ductil iron GCD 50 has been investigated using ADI treated specimens. The specimens have been austenitized at $900^{\circ}C$ for 2 hours, followed by controlled cooling to $800^{\circ}C$ under the cooling rate of $0.05^{\circ}C/sec$, then austempered at $380^{\circ}C$, $330^{\circ}C$, $280^{\circ}C$ and $230^{\circ}C$ for 1 hour. The specimens treated in the salt of 5% water were found to have higher tensile strength than that of the normal salt bath. Elongation and impact energy increased in proportion to the increase of retained austenite volume fraction. The increase of cooling rate of the salt by the addition of 5% water to the salt resulted in the increase of retained austenite volume fraction and the formation of fine bainitic ferrite.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.52-59
• /
• 1998

The ZnS:Mn thin film electroluminescent(TFEL) devices fabricated by ALE system were investigated. Yellow-orange light emission was observed when the applied voltage exceeded 134 V and luminance increased sharply as the applied voltage increased. Luminance of 568 Cd/c $m^{2}$ was obtained under 1 KHz sinusoidal voltage wave application at the peak applied voltage of 230 V. The peak wavelength of the emissionwas 577 nm. The C-V, Q-V, $Q_{t}$ - $F_{p}$ , L- $Q_{cond}$, and V- $Q_{pol}$ have been measured under theapplication of the trapezoidal wave with its pulse width varying 0 to 75 .mu.sec. The phoshor and the insulator capacitance of the TFEL device under test were 24.3 nF/c $m^{2}$ and 9 nF/c $m^{2}$, respectively. It was observed that the threshold voltage changed from 137V to 100V as the pulse width varied from 0 to 75 .mu.sec. The L- $Q_{cond}$ characteristics showed that the light emission increased in proportion to the $Q_{cond}$. The luminance increased from 386 Cd/ $m^{2}$ to 607 Cd/ $m^{2}$ when the $Q^{+}$$_{cond}$ increased from 1.3 .mu.C/c $m^{2}$ to 2.3 .mu.C/c $m^{2}$. The V- $Q_{pol}$ characteristics showed that the V was inversely proportional to $Q_{pol}$./. th/ was inversely proportional to $Q_{pol}$./. pol/./.

• 전자통신동향분석
• /
• 제28권3호
• /
• pp.137-150
• /
• 2013

본 논문은 경매설계 벤치마크 대상 국가로 거론되고 있는 프랑스를 대상으로 모바일 시장동향, 4G 주파수 경매결과, 정책과정, 그리고 세부 정책내용을 분석하여 조만간 시행될 예정인 국내의 1.8GHz 및 2.6GHz 대역 경매설계에 관한 정책적 시사점을 도출하였다. 본 논문의 분석에 따르면 주파수의 이용 효율성, 공정경쟁 양 측면에서 극단에 가까운 패키징 옵션 대신에 양 측면을 보다 균형되게 접근하여 메커니즘을 통해 자동적으로 결정되도록 하는 패키징 옵션 방안 마련이 필요하다고 사료된다. 이와 함께 미래 10년간의 경쟁 상태에 큰 영향을 줄 수 있는 제 4의 이동통신사의 진입 문제, 주파수 할당의 동시 할당 또는 순차적 할당 등에 대하여도 심도있는 정책적 고민이 병행되어야 한다고 사료된다.

• 열처리공학회지
• /
• 제10권2호
• /
• pp.128-137
• /
• 1997

The formation processes of the retained austenite(${\gamma}_R$) in SHCP100 steel sheets were investigated in order to improve the transformation induced plasticity(TRIP) effect of ${\gamma}_R$. An excellent combination of elongation about 23% and high strength over 830 MPa was achieved by processing of intercritical annealing and isothermal holding. The mechanical properties of TRIP-aided dual phase steel was found to depend on the volume ratio of each phase and the volume fraction of ${\gamma}_R$. It was also noted that the proper mechanical stability of ${\gamma}_R$ improved the mechanical properties. In this work, the best balance of strength-ductility was obtained by holding the steel at $420^{\circ}C$ for 500sec. after annealing at $730^{\circ}C$ for 300 sec.

• 한국주거학회논문집
• /
• 제27권6호
• /
• pp.137-144
• /
• 2016

In modular architecture, manufacturing drawing which includes whole information for modular unit production is essential since works for modular unit have to be performed in manufacturing factory not construction field. Although the manufacturing drawing is important as known it is insufficient to utilize the manufacturing drawing in modular architecture project and this makes modular unit low-quality with re-work and work time delay. To prevent low-quality modular unit caused by insufficient manufacturing drawing, in this research firstly manufacturing drawing's current situation and error cases in manufacturing phase of past modular housing project were analyzed, and correlation between reduction of errors occurance frequency and improving manufacturing drawing was verified. Secondly manufacturing drawing improvement factors were deducted in interior, furniture, mechanical work phase which errors' occurance rate is high and the way of deducting manufacturing drawing lists and contents were suggested with light-weight work as an example in case of new type of errors occurance. A series of research process can contribute to good-quality modular unit by errors reduction. As a result of research, about half of errors occurance can be reduced with suggested manufacturing drawing improvement factors. And the manufacturing drawing process can contribute to modular production which have uniform quality.

• Smart Structures and Systems
• /
• 제13권1호
• /
• pp.137-154
• /
• 2014

Servohydraulic shaking tables are being increasingly used in the field of earthquake engineering. They play a critical role in the advancement of the research state and remain one of the valuable tools for seismic testing. Recently, the National Earthquake Engineering Research Center, CGS, has acquired a 6.1m x 6.1 m shaking table system which has a six degree-of-freedom testing capability. The maximum specimen mass that can be tested on the shaking table is 60 t. This facility is designed specially for testing a complete civil engineering structures, substructures and structural elements up to collapse or ultimate limit states. It can also be used for qualification testing of industrial equipments. The current paper presents the main findings of the experimental shake-down characterization testing of the CGS shaking table. The test program carried out in this study included random white noise and harmonic tests. These tests were performed along each of the six degrees of freedom, three translations and three rotations. This investigation provides fundamental parameters that are required and essential while elaborating a realistic model of the CGS shaking table. Also presented in this paper, is the numerical model of the shaking table that was established and validated.

• Ocean Systems Engineering
• /
• 제3권2호
• /
• pp.137-147
• /
• 2013

Moonpools are vertical wells in a floating body used onboard many types of vessels like cable-laying vessels and offshore support vessels. Moonpool gives passage to underwater activities for different types of ships as per their mission requirements. It is observed that inside a moonpool considerable relative motions may occur, depending on shape, depth of the moonpool and on the frequency range of the waves to which the ship is exposed. The vessel responses are entirely different in zero and non-zero Froude number. Former situation is paid attention in this study as the mission requirement of the platform is to be in the particular location for long period of operation. It is well known that there are two modes of responses depending on the shape of the moonpool viz., piston mode for square shape and sloshing mode for rectangular shapes with different aspect ratios of opening like 1:1.5 and 1:2 ratios. Circular shaped moonpool is also tested for measuring the responses. The vessel moored using heavy lines are modeled and tested in the wave basin. The moored lines are provided with pre-tension and the dynamic tensions on the lines are measured. The different modes of oscillations of water column are measured using wave gauge and the vessel response at a particular situation is determined. RAOs determined for various situations provide better insight to the designer. The experiments done in the wave basin may also be compared with a software package meant for handling moored floating bodies.