• The Journal of Korean Society for Radiation Therapy
• /
• v.22 no.2
• /
• pp.123-129
• /
• 2010

Purpose: The purpose of this study was to evaluate dosimetric characteristics of Optically stimulated luminescent dosimeters (OSLD) for dosimetry Materials and Methods: InLight/OSL $NanoDot^{TM}$ dosimeters was used including $Inlight^{TM}MicroStar$ Reader, Solid Water Phantom, and Linear accelerator ($TRYLOGY^{(R)}$) OSLDs were placed at a Dmax in a solid water phantom and were irradiated with 100 cGy of 6 MV X-rays. Most irradiations were carried out using an SSD set up 100 cm, $10{\times}10\;cm^2$ field and 300 MU/min. The time dependence were measured at 10 minute intervals. The dose dependence were measured from 50 cGy to 600 cGy. The energy dependence was measured for nominal photon beam energies of 6, 15 MV and electron beam energies of 4-20 MeV. The dose rate dependence were also measured for dose rates of 100-1,000 MU/min. Finally, the PDD was measured by OSLDs and Ion-chamber. Results: The reproducibility of OSLD according to the Time flow was evaluated within ${\pm}2.5%$. The result of Linearity of OSLD, the dose was increased linearly up to about the 300 cGy and increased supralinearly above the 300 cGy. Energy and dose rate dependence of the response of OSL detectors were evaluated within ${\pm}2%$ and ${\pm}3%$. $PDD_{10}$ and PDD20 which were measured by OSLD was 66.7%, 38.4% and $PDD_{10}$ and $PDD_{20}$ which were measured by Ion-chamber was 66.6%, 38.3% Conclusion: As a result of analyzing characteration of OSLD, OSLD was evaluated within ${\pm}3%$ according to the change of the time, enregy and dose rate. The $PDD_{10}$ and $PDD_{20}$ are measured by OSLD and ion-chamber were evaluated within 0.3%. The OSL response is linear with a dose in the range 50~300 cGy. It was possible to repeat measurement many times and progress of the measurement of reading is easy. So the stability of the system and linear dose response relationship make it a good for dosimetry.

• Journal of Ginseng Research
• /
• v.23 no.3 s.55
• /
• pp.123-129
• /
• 1999

Under the light condition of 25,000 Lux (12 hrs dark and light cycle) with scrapping treatment of aerial mycelia of Cylindrocarpon destructans on potato dextrose agar (PDA), V-8 juice agar, and ginseng extract agar, production of the macroconidia was increased to $3.7\~8.1$ fold over them produced in the dark. They were also produced $7.7\~18.0$ times more in the liquid cultures under the light condition than under the dark as well. PDA and V-8 juice agar among the tested were the best for the macroconidium production. On PDA, 1,585 $macroconidia/mm^2$ were produced under the light of 25,000 Lux with scrapping treatment of aerial mycelia of C. destructans, which is 3.2 and 1.4 times more than those produced under 3,000 and 10,000 Lux, respectively. Meanwhile, $20\~99$ macroconidia/$mm^2$ were produced by the non-scrapping under the light condition between 3,000 Lux and 25,000 Lux. The macroconidia were, however, lysed at $6\~7$ days after being incubated under the above range of the light. They were consisted of $1\~3$ cells in a macroconidium while $69.4\~100\%$ of them were the two-celled and the number did not seem to be affected by either the scrapping or the light. Production of chlamydospore converted from mycelia of C. destructans seemed to be promoted by the light and the scrapping as well. The 1,285 chlamydospres/$mm^2$ were produced with the light (25,000 Lux), which is 2.8 and 1.2 times more than those with 3,000 and 10,000 Lux, respectively. Scrapping the aerial mycelia of the cultures increased the chlamydospore formation to 1.9, 2.5 and 1.4 times more than the non-scrapping under the light intensity of 3,000 Lux, 10,000 Lux, and 25,000 Lux, respectively. On PDA, 1 to 8 chlamydospore(s) per catena were formed by all treatments tested and $34.2\~58.9\%$ of them was a single chlamydospore, However, the numbers was affected by neither the light ($3,000\~25,000$ Lux) nor the scrapping the aerial mycelia.

• Radiation Oncology Journal
• /
• v.23 no.2
• /
• pp.123-130
• /
• 2005

Purpose: We wanted to improve the setup reproducibility of breast cancer patients when utilizing a commercially available breast board for radiation therapy. The breast board was modified by using a new head rest and 2 types of board fixation devices. Materials and Methods: A conventional head/neck rest was modified to be positioned in various slots of the breast board, and it was fabricated 1 cm thinner to provide more comfort to a patient when the patient's neck was rotated. This rest improves the uncertainty of the daily setup. Also, the sagging problems at the left and right sides became negligible with the two types of board fixation devices: (1) the stair type, and (2) the arm type. The first device consists of an upper/lower holder with 4 stair-types of grooves and 4 rectangular Inserts. In order to cover the whole range of vertical setup of the breast board, 4 rectangular inserts were needed, and each covered 10 steps. The arm-type fixation device was also fabricated and attached to the breast board, It had two aluminum bars that were fixed by utilizing a lock-type of screw. These devises were evaluated with two volunteers in order to prove the effectiveness of the improved setup accuracy. Results; The developed cranio-caudal fixation device demonstrated that it could reduce the cranio-caudal error by nearly $55\%$ compared to the old device. As for left-and-right inclination, the stair-type and arm-type fixation devices can reduce the relative inclination by nearly $80\%$ and $90\%$, respectively, compared to the breast board without the fixation device. Conclusion: It was verified that the developed devices were effective for positioning the patients and for avoiding inclination of the breast board.

• Current Research on Agriculture and Life Sciences
• /
• v.4
• /
• pp.119-123
• /
• 1986

The study was conducted to find out the gene effects on body weights at weaning and at the age of 60 days in mice, with 343 progenies from full-dialell crosses of four lines of BALB/c, CBA, C3H and C57BL. The progenies were reared at the Experimental Animal Farm, College of Agriculture, Kyungpook National University from November, 1984 to February, 1985, and data collected from the progenies were analyzed into general combining ability, maternal effects, specific combining ability and reciprocal effects with Harvey's model. General combining ability effects estimated in line-crosses were -0.6033~0.5298 for weaning weights and -0.5086~1.0012 for body weights at the age of 60 days. General combining ability for BALB/c and C57BL were significantly better than general combining ability for CBA and C3H for both traits (P<0.05). Maternal effects for C3H were significantly larger than the maternal effects of BALB/c for both traits (P<0.05). The estimates of maternal effects were -0.9678~0.4609 for weaning weights and -1.1886~0.0729 for body weights at the age of 60 days. Specific combining ability effects were estimated to be significant (P<0.05), and the estimates were -0.1999~0.3380 for weaning weights and -0.4056~0.3317 for body weights at the age of 60 days. Reciprocal effects were found to be largest in BALB/c${\times}$C57BL and BALB/c${\times}$C3H. The estimates were -0.5049 from BALB/c${\times}$C57BL and 0.4972 from BALB/c${\times}$C3H form weaning weights, and -1.0336 from BALB/c${\times}$C57BL and 1.2793 from BALB/c${\times}$C3H for body weights at the age of 60 days.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.823-831
• /
• 2015

Evaluation of biological activity and analysis of functional constituents from water and ethanol extracts of four different parts of mulberry (Morus alba L.) tree were carried out to develop functional ingredients and foods using extracts of mulberry tree. The water and ethanol extracts of four different parts of mulberry tree were prepared and their biological activities and functional constituents determined by in vitro assays and HPLC, respectively. In general, ethanol extracts showed stronger biological activities and higher functional constituents than water extracts. Ethanol extracts of mulberry fruit, root bark, and twig showed stronger antioxidant ($IC_{50}=128.4{\mu}g/mL$), ${\alpha}$-glucosidase ($IC_{50}=12.0{\mu}g/mL$), and lipoxygenase ($IC_{50}=36.3{\mu}g/mL$) and tyrosinase ($IC_{50}=410.3{\mu}g/mL$) inhibitory activities, respectively, than those of other parts. Mulberry fruit and leaf showed the highest contents of anthocyanin (cyanidin 3-glucoside: 213.20 mg/100 g) and chlorogenic acid (514.97 mg/100 g), and especially ethanol extract of mulberry leaf contained higher quercetin 3-O-(6-O-malonyl)glucoside (143.25 mg/100 g) and kaempferol 3-O-(6-O-malonyl)glucoside (30.25 mg/100 g) contents without water extract of mulberry leaf. Meanwhile, mulberry twig contained both oxyresveratrol glycoside (48.90 mg/100 g) and its aglycone (21.88 mg/100 g), whereas mulberry root bark contained mostly oxyresveratrol glycoside (724.05 mg/100 g). Additionally, mulberry root bark and leaf contained much higher ${\gamma}$-aminobutyric acid (223.90 mg/100 g) and 1-deoxynojirimycin (86.07 mg/100 g) contents, respectively, than other parts of mulberry tree. These results suggest that high quality processed foods and functional foods using mixtures of mulberry fruits, leaves, twigs, and root barks should be developed for prevention and inhibition of several pathological disorders.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.123-131
• /
• 2012

This study was conducted to estimate correlation structure between Hanwoo steer growth traits - body weights at 6 month, 12 month, 18 month and 24 month of age, average daily gain, carcass traits, body size traits at 18 months of age. Hanwoo progeny test data(body weight, body size traits) collected from 2004 to 2008 on a total of 1,838 steers at Hanwoo Improvement Main Center(NACF) were analyzed. Carcass traits were used to score the 24 months of age and slaughter. Correlation analyses were performed with observed scales of the traits and with residuals considering fixed effects in generalized linear models. The correlated coefficient estimated between live weight at slaughter(24 months of age) and cold carcass weight was high at 0.92. Correlation between beef yield index values and backfat thickness was estimated to be high and negative at -0.92. Hip height and wither height was found to be highly correlated(0.89). Chest width and chest depth also was found to be highly correlated at 0.73. Rump width was highly correlated with chest depth(0.75) and chest width(0.74). Correlation between pelvic width and rump width was estimated to be 0.74. Hipbone width was shown to be highly correlated with chest depth(0.73), chest width(0.70), rump width(0.75), or pelvic width(0.75). Correlation between wither height and carcass weight was 0.48 in observed scale. Chest girth was phenotyically (residual correlation) correlated with carcass weight (0.51), the estimates of which were some higher than than with the other carcass traits. This study will be utilized for Hanwoo Steers genetic evaluation.

• Journal of the Korean Magnetics Society
• /
• v.17 no.3
• /
• pp.120-123
• /
• 2007

The typical double-barrier magnetic tunnel junction (DMTJ) structure examined in this paper consists of a Ta 45/Ru 9.5/IrMn 10/CoFe7/$AlO_x$/free layer/AlO/CoFe 7/IrMn 10/Ru 60 (nm). The free layer consists of an $Ni_{16}Fe_{62}Si_8B_{14}$ 7 nm, $Co_{90}Fe_{10}$ (fcc) 7 nm, or CoFe $t_1$/NiFeSiB $t_2$/CoFe $t_1$ layer in which the thicknesses $t_1$ and $t_2$ are varied. The DMTJ with an NiFeSiB-free layer had a tunneling magnetoresistance (TMR) of 28%, an area-resistance product (RA) of $86\;k{\Omega}{\mu}m^2$, a coercivity ($H_c$) of 11 Oe, and an interlayer coupling field ($H_i$) of 20 Oe. To improve the TMR ratio and RA, a DMTJ comprising an amorphous NiFeSiB layer that could partially substitute for the CoFe free layer was investigated. This hybrid DMTJ had a TMR of 30%, an RA of $68\;k{\Omega}{\mu}m^2$, and a of 11 Oe, but an increased of 37 Oe. We confirmed by atomic force microscopy and transmission electron microscopy that increased as the thickness of NiFeSiB decreased. When the amorphous NiFeSiB layer was thick, it was effective in retarding the columnar growth which usually induces a wavy interface. However, if the NiFeSiB layer was thin, the roughness was increased and became large because of the magnetostatic $N{\acute{e}}el$ coupling.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.117-123
• /
• 2021

In this study, the composite was prepared by mixing SiOx, soft carbon, and carbon black and the electrochemical properties of lithium ion battery were investigated. The content of SiOx added to improve the capacity of the soft carbon anode material was varied to 0, 6, 8, 10, 20 wt%, and carbon black was added as a structural stabilizer for reducing the volume expansion of SiOx. The physical properties of prepared CB/SiOx/C composite were investigated through XRD, SEM, EDS and powder resistance analysis. In addition, the electrochemical properties of prepared composite were observed through the charge/discharge capacity, rate and impedance analysis of the lithium ion battery. The prepared CB/SiOx/C composite had an inner cavity capable of mitigating the volume expansion of SiOx by adding carbon black. The formed internal cavity showed a low initial efficiency when the SiOx content was less than 8 wt%, and low cycle stability when the content of SiOx was less than 20 wt%. The CB/SiOx/C composite containing 10 wt% of SiOx showed an initial discharge capacity of 537 mAh/g, a capacity retention rate of 88%, and a rate of 79 at 2C/0.1C. SiOx was added to improve the capacity of the soft carbon anode material, and carbon black was added as a structural stabilizer to buffer the volume change of SiOx. In order to use the CB/SiOx/C composite as a high-efficiency anode material, the mechanism of the optimal SiOx and the use of carbon black as a structural stabilizer was discussed.

• Korean Journal of Poultry Science
• /
• v.47 no.4
• /
• pp.267-274
• /
• 2020

This study was conducted to estimate genetic parameters for growth and egg production traits in Black Korean native chicken (L strain) and Korean White Leghorn (F, K strains) using a multi-traits animal model BLUP. Traits used for this study were body weight at 150 days (BW150) and 270 days (BW270), age at first egg (DAY1st), egg weight at first egg (EW1st) and 270 days (EW270), and number of eggs laid by 270 days (EP270), and included 68,688 pedigree and 123,905 performance records collected from 2001 to 2013. In L, F, K strains, heritability estimates of BW150 were high (0.48, 0.52 and 0.50, respectively); of BW270 were high (0.56, 0.57 and 0.56); of DAY1st were medium to high (0.45, 0.39 and 0.31); of EW1st were low (0.15, 0.16 and 0.15); of EW270 were high (0.58, 0.55 and 0.59) and of EP270 were moderate (0.22, 0.21 and 0.20). The genetic and phenotypic correlation of DAY1st with EP270 were highly negative (-0.73 to -0.63 and -0.48 to -0.42). The genetic and phenotypic correlation of EP270 with BW150 and BW270, respectively were low negative (-0.16 to 0.01 and -0.14 to -0.03) and low to moderate positive (-0.08 to 0.07 and -0.13 to 0.04). The genetic and phenotypic correlation of EW270 with BW150 and BW270, respectively were moderate to high positive (0.39 to 0.49 and 0.36 to 0.46) and (0.29 to 0.33 and 0.34 to 0.37). The study showed that there is a potential for genetic improvement of Korean Indigenous chicken through selection program.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.1
• /
• pp.48-59
• /
• 2023

Ground-level ozone affects human health and plant growth. Ozone is produced by chemical reactions between oxides of nitrogen (NOx) and volatile organic compounds (VOCs) from anthropogenic and biogenic sources. In this study, two different land cover and emission factor datasets were input to the MEGAN v2.1 emission model to examine how these parameters contribute to the biogenic emissions and ozone production. Four input sensitivity scenarios (A, B, C and D) were generated from land cover and vegetation emission factors combination. The effects of BVOCs emissions by scenario were also investigated. From air quality modeling result using CAMx, maximum 1 hour ozone concentrations were estimated 62 ppb, 60 ppb, 68 ppb, 65 ppb, 55 ppb for scenarios A, B, C, D and E, respectively. For maximum 8 hour ozone concentration, 57 ppb, 56 ppb, 63 ppb, 60 ppb, and 53 ppb were estimated by scenario. The minimum difference by land cover was up to 25 ppb and by emission factor that was up to 35 ppb. From the modeling performance evaluation using ground ozone measurement over the six regions (East Seoul, West Seoul, Incheon, Namyangju, Wonju, and Daegu), the model performed well in terms of the correlation coefficient (0.6 to 0.82). For the 4 urban regions (East Seoul, West Seoul, Incheon, and Namyangju), ozone simulations were not quite sensitive to the change of BVOC emissions. For rural regions (Wonju and Daegu) , however, BVOC emission affected ozone concentration much more than previously mentioned regions, especially in case of scenario C. This implies the importance of biogenic emissions on ozone production over the sub-urban to rural regions.