• Journal of Microbiology and Biotechnology
• /
• v.26 no.2
• /
• pp.263-269
• /
• 2016

Temperate phages have been suggested to carry virulence factors and other lysogenic conversion genes that play important roles in pathogenicity. In this study, phage TEM123 in wild-type Staphylococcus aureus from food sources was analyzed with respect to its morphology, genome sequence, and antibiotic resistance conversion ability. Phage TEM123 from a mitomycin C-induced lysate of S. aureus was isolated from foods. Morphological analysis under a transmission electron microscope revealed that it belonged to the family Siphoviridae. The genome of phage TEM123 consisted of a double-stranded DNA of 43,786 bp with a G+C content of 34.06%. A bioinformatics analysis of the phage genome identified 43 putative open reading frames (ORFs). ORF1 encoded a protein that was nearly identical to the metallo-β-lactamase enzymes that degrade β-lactam antibiotics. After transduction to S. aureus with phage TEM123, the metallo-β-lactamase gene was confirmed in the transductant by PCR and sequencing analyses. In a β-lactam antibiotic susceptibility test, the transductant was more highly resistant to β-lactam antibiotics than S. aureus S133. Phage TEM123 might play a role in the transfer of β-lactam antibiotic resistance determinants in S. aureus. Therefore, we suggest that the prophage of S. aureus with its exotoxin is a risk factor for food safety in the food chain through lateral gene transfer.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.131-135
• /
• 2007

A previous report recently demonstrated that ultrasound-induced hyperthermia (USHT:0.4 watts (W)/$cm^2$ at $41^{\circ}C$) could increase cellular uptake of P-glycoprotein (P-gp) substrates in P-gp expressing cancer cell lines. Since P-gp plays a major role in limiting drug permeability in the multi-drug resistant (MDR) cells, studies were conducted to elucidate the mechanism of USHT on cellular accumulation of P-gp and non-P-gp substrate in MDR cells. To accomplish this aim, we studied the effects of USHT on the accumulation of P-gp substrate, R123 and non-P-gp substrate, antipyrine in MDR cells. We demonstrated that USHT increased permeability of hydrophobic molecules (R123 and $[^{14}C]$-antipyrine). The enhanced permeability is reversible and size-dependent as USHT produces a much larger effect on cellular accumulation of $[^{14}C]$-antipyrine (MW 188) than that of R123 (MW 380.8). These results suggest that USHT could affect MDR cells more sensitive than BBMECs. Also, the present results point to the potential use of USHT to increase cellular uptake of P-gp recognized substrates, mainly anti-cancer agents into cancer cells.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1011-1017
• /
• 1998

$YBa_2Cu_3O_{6+x}(Y123)-Ag$ high-Tc superconducting wires were fabricated by plastic extrusion technique using pyrophoric synthetic and mechanical mixing powder with and without Ag addition(20 wt.%). This method involves powder preparation, plastic paste making, die extrusion, binder burn-out and the sintering process. In order to fabricate a good-quality superconducting body, it is required to use homogeneous and fine-size power as a starting materials. $Y_2O_3-BaCO_3-CuO$ precursor powders with/without Ag addition were prepared both by pyrophoric synthetic(PS) and mechanical mixing(MM) method of raw powders. The formation kinetics of the powder mixtures into Y123 phase was investigated at various temperatures and times in air atmosphere. The powder prepared by PS method was more easily converted into a Y123 phase than the MM powder. The fine size and good chemical homogeneity of the powder prepared by PS method is attributable to the fast formation into a Y123 phase. The critical current density($J_c$) of the Y123-Ag superconducting wires made by plastic extrusion method were in the range of $150A/cm^2{\sim}230A/cm^2$. depending on the charateristics of starting material powders. $J_c$ of the wire prepared by pyrophoric synthetic powder with 20 wt.% Ag addition was $230A/cm^2$.

• Environmental Engineering Research
• /
• v.17 no.3
• /
• pp.123-124
• /
• 2012

• Proceedings of the KSCN Conference
• /
• 1998.11a
• /
• pp.123-123
• /
• 1998

• Journal of Public Diplomacy
• /
• v.1 no.2
• /
• pp.123-126
• /
• 2021

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.2023-2025
• /
• 2008

To evaluate the potential of radioiodine labelled hypericin as a malignant glioma imaging agent, U-251 MG, U-373 MG, C6 glioma and fibroblast were treated with a I-123 labelled hypericin derivative and C6 glioma transplanted nude mouse were injected with a I-124 labelled hypericin derivative for a micro PET imaging. 2- Iodohypericin was prepared as a reference compound. In this paper, we describe the syntheses of 2- iodohypericin and 2-[$^{123}I/^{124}I$]iodohypericin and the results of a corresponding biological evaluation. In all glioma cell lines, 2-[$^{123}I$]iodohypericin uptake was increased in a time dependant manner and an accumulation of 2-[$^{124}I$]iodohypericin was observed in C6 glioma bearing nude mouse. These results suggest that radioiodine labelled hypericin can visualize a PKC overexpressed malignant glioma.

• The Journal of Korean Society of Virology
• /
• v.27 no.2
• /
• pp.129-135
• /
• 1997

Serum samples from 123 males and 123 females collected by age in 1996 were analyzed for antibodies against surface antigen of Hepatitis B virus and C22-3, C200 antigens of Hepatitis C virus. Sera from the children under the age of 10 showed 30% seropositivity to the surface antigen of Hepatitis B virus, 33.3% in $10{\sim}19$ year group, 20% in $20{\sim}29$ year group, 17.6% in $30{\sim}39$ year group, 3.3% in $40{\sim}49$ year group, 5.9% in $50{\sim}59$ year group, 8,3% in $60{\sim}69$ year group, 2.9% in $70{\sim}79$ year group, but antibody could not found in $80{\sim}86$ year group. 12 out of 123 male sera were positive, 19 out of 123 female sera were positive and overall rate of positivity of antibody against surface antigen of Hepatitis B virus was 12.6%. Serum samples from peoples under the age of 30 had not antibody against C22-3, C200 antigens of Hepatitis C virus. The positivity rate was 2.9% in $30{\sim}39$ year group. 5 out of 30 sera from $40{\sim}49$ year age group were positive, and 3 positive sera showed extremely high titer (1:524,288) but the titers of two remaining sera were 1:32, 1:8,192 respectively. 5.9% was positive in $50{\sim}59$ year group, 8.3% in $60{\sim}69$ year group, 11.8% in $70{\sim}79$ year group but all negative in $80{\sim}86$ year group 6 out of 123 male sera were positive (4.9%), 9 out of 123 female sera were positive (7.3%). Overall rate of positivity of antibody against C22-3, C200 antigen of Hepatitis C virus was 6.1 %. None out of 246 sera had both antibodies against Hepatitis B virus and Hepatitis C virus.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.5
• /
• pp.275-281
• /
• 2016

In this study, we investigate the pool boiling enhancement caused by perforated plates on top of a smooth surface. We conduct tests using R-123 at atmospheric pressure. It was shown that perforated plates significantly enhanced the pool boiling of the smooth surface. The reason may be attributed to the increased bubble contact area between the plates. The results showed that the enhancement ratio was dependent on the heat flux. At high heat flux, the enhancement ratio increased as the porosity increased. However, at low heat flux, the enhancement ratio decreased as the porosity increased. For the present investigation, the optimum configuration had a pore diameter of 2.0 mm, pore pitch of $2.5mm{\times}5.0mm$ or $5.0mm{\times}5.0mm$, and a gap width of 0.5 mm, which yielded heat-transfer coefficients that are close to those of GEWA-T. The optimum porosity for R-123 was significantly larger than that of water or ethanol. The reason for this may be the large liquid-to-vapor density ratio along with the small latent heat of vaporization of R-123. The perforated plates yielded smaller boiling hysteresis compared with that of the smooth surface.

• Progress in Superconductivity
• /
• v.14 no.1
• /
• pp.39-44
• /
• 2012

The fabrications condition and superconducting properties of top-seeded melt growth (TSMG) processed $GdBa_2Cu_3O_{7-y}$ (Gd123) bulk superconductors were studied. Processing parameters (a maximum temperature ($T_{max}$), a temperature for crystal growth ($T_G$) and a cooling rate ($R_G$) through a peritectic temperature ($T_P$) for the fabrication of single grain Gd123 superconductors were optimized. The magnetic levitation forces, trapped magnetic fields, superconducting transition temperature ($T_c$) and critical current density ($J_c$) of the Gd123 bulks superconductors were estimated. Single grain Gd123 bulk superconductors were successfully fabricated at the optimized processing condition. The $T_c$ of a TSMG processed Gd123 sample was 92.5 K and the $J_c$ at 77 K and 0 T was approximately $50kA/cm^2$. The trapped magnetic field contour and magnetic levitation forces were dependent on the top surface morphology of TSMG processed Gd123 samples. The single grain Gd123 samples, field-cooled at 77 K using a Nd-B-Fe permanent magnet with 5.27 kG and 30 mm dia., showed the trapped magnetic field contour of a single grain with a maximum of 4 kG at the sample center. The maximum magnetic levitation forces of the single grain Gd123 sample, field-cooled or zero field-cooled, were 40 N and 107 N, respectively.