• Korean Journal of Food Science and Technology
• /
• v.44 no.2
• /
• pp.228-234
• /
• 2012

The varying characteristics between traditional and commercial soy sauce may be initiated by raw materials and fermentation techniques for the production of $meju$ and $koji$. We examined properties regarding polysaccharides isolated from commercial soy sauce made by the $koji$ process (CSP-0) and Korean traditional soy sauce made by the $meju$ process (KTSP-0) as well as their immuno-stimulating activities. KTSP-0 had rhamnogalacturonan II (RG-II) including 1.1% of unusual monosaccharides 3-deoxy-D-$manno$-2-octulosonic acid (KDO). Anti-complementary activities of CSP-0 and KTSP- 0 were increased dose-dependently but KTSP-0 (64.7%) was higher than CSP-0 (56%) at $1,000{\mu}g/mL$. C3 activation products were identified by crossed immuno-electrophoresis. CSP-0 caused complementary activations $via$ only classical pathway while KTSP-0 caused complementary activations $via$ both alternative and classical pathways. KTSP-0 significantly increased the secretion of interleukin (IL)-6 at $8-1,000{\mu}g/mL$ and IL-12 at $40{\mu}g/mL$ on macrophages. The results suggest that the immuno-stimulating activity of KTSP-0 is greater than that of CSP-0 from anti-complementary activity.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.27-32
• /
• 2010

This study was conducted to monitor aflatoxins in various medicinal herbs, providing available data for the safety of those products. To monitor aflatoxins in medicinal herbs, a total of 400 samples of 40 different herbs were collected in commercial retailers in Seoul, Daejeon, Gwangju, Daegu, and Busan from March to August, 2008. The samples that passed the sensory evaluation were tested for aflatoxins. Aflatoxins in samples were analyzed by HPLC-florescence coupled with photochemical enhancement. Samples were extracted with 70% methanol and then diluted to the appropriate concentration. A refining process was performed using an immunoaffinity column. The analytical method used in this study was validated. The $R^2$ value for aflatoxin $B_1$ was 0.99946, and the detection range was from 0.25 to 10.0 ng/mL. The accuracy of the analysis was ranged from 83.2% to 101.8%. The relative standard deviation (RSD) in the aflatoxin $B_1$ analysis was 3.4%, demonstrating the precision of this method. In addition, the detection limit and quantitative analysis limit of aflatoxin $B_1$ was $0.53\;{\mu}g/kg$ and $1.76\;{\mu}g/kg$, respectively. These results indicated that the analytical method used in this study was appropriate. The results of HPLC showed that 1% (4 samples) of the samples may contain aflatoxins. The concentration of quantified aflatoxin was $2.3\;{\mu}g/kg$ for both Quisqualis fructus and Remotiflori radix samples. The other samples were below the limit of quantification. Moreover, the concentration of aflatoxin $B_1$ which is made by specific fungi were below the level of regulation. Only 20% of aflatoxin $B_1$ were transferred to hot water. Therefore, the levels of aflatoxins in medicinal herbs were considered to be safe especially considering the aflatoxin transfer ratio.

• Korean Journal of Food Science and Technology
• /
• v.46 no.6
• /
• pp.743-749
• /
• 2014

The aim of this study was to develop hydroponic-cultured ginseng vinegar (HGV) containing ginsenoside Rg2 in order to its anti-obesity and anti-hyperlipidemic effects in C57BL/6J mice. HGV was prepared by two-stage fermentation. The ginsenoside Rg2 contained in acetic acid-fermented HGV increased by 4.0 times compared to that in pre-fermented HGV. To measure the anti-obesity effect of HGV, thirty two mice were randomly divided into four groups: normal diet group (ND), high-fat diet group (HFD), high-fat diet-supplemented with HGV group (HGV), and high-fat diet-supplemented with green tea extract group (GT). Body weight, fat weight, and liver weight decreased in the HGV group. The HGV group also showed lower plasma levels of low-density lipoprotein (LDL)-cholesterol and triglycerides, and higher levels of high-density lipoprotein (HDL)-cholesterol compared to the corresponding levels in the HFD group. Furthermore, there were significant decreases in plasma aspartase aminotransferase (AST) and alanine aminotransferase (ALT) levels in the HGV group compared to the corresponding levels in the HFD group. These results suggest that HGV can be used as an anti-obesity therapeutic agent or functional ingredient.

• Journal of Hospice and Palliative Care
• /
• v.21 no.2
• /
• pp.51-57
• /
• 2018

Purpose: End-of-life (EoL) decisions are challenging and multifaceted for patients and physicians. This study was aimed to explore how EoL care is practiced for patients with a do-not-resuscitate (DNR) order. Methods: We retrospectively analyzed medical records of patients who died after agreeing to a DNR order in 2016 at a university hospital. Characteristics including cause of death, intensity of EoL care, and other factors were reviewed and statistically analyzed. Results: Of total 375 patients, 170 patients (45.3%) died with malignancies, and 205 patients (54.6%) with other causes involving the central nervous system (19.2%), pulmonary (14.7%), cardiologic (6.7%) and infectious (6.4%) conditions. Both the cancer and non-cancer patient groups showed a short duration from DNR to death (median 3 days vs 2 days, P=0.629). An intensive care group comprising patients who received one or more intensive treatments such as ventilator (n=205) showed a higher number of non-cancer patients and a shorter duration from DNR to death than a group that withheld treatment before DNR (P<0.05). Conclusion: EoL decisions were made very late by both cancer and non-cancer patients. About half of the patients did not have cancer, and two-thirds of them decided DNR during intensive treatment. To make a good EoL decision, a shared decision making with patients should be done at an earlier stage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.489-499
• /
• 2016

This study examined the effects of a forest environment on internet addition and the self-esteem of internet-addicted adolescents. For comparison, the same group counseling programs were conducted in a classroom not in the forest. Twenty-four second grade students from a Middle School in S-city were grouped with 8 members in each group. Each group joined this program 6 times. The group results were then compared over a follow-up period. The dependent variables were the internet addiction scores and self-esteem scores. In the research results, the experimental group that undertook this program in the forest environment showed significantly different internet addiction scores compared to the control group immediately after the program and during the follow-up period. According to the period, the experimental group showed a significant difference in the internet addiction scores compared to the previous scores, immediately after the program and during the follow-up period. The comparison group showed no significant difference compared to the control group immediately after the program and during the follow-up period. The program in the forest environment showed a significant difference in the self-esteem scores compared to the comparison group and the control group immediately after the program and during the follow-up period. The self-esteem scores of the experimental group increased significantly compared to the comparison group and control group. In addition, the self-esteem scores of the comparison group also increased significantly, compared to the control group. The self-esteem scores of the experimental group also increased significantly, compared to the previous scores, immediately after the program and during the follow-up period. These results suggest that a natural environment, such as a forest, has therapeutic effects on decreasing the addiction symptoms' of internet addiction adolescents and also helps raise their self-esteem. Nevertheless, more study will be needed to verify what effects the forest environment have on the therapeutic mechanism on various addicts. Lastly, the constraints and implications of this research are described.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.188-198
• /
• 2016

This study examined the effects of a smoking cessation coaching program based on the motivation stage applying the Transtheoretical Model to stop the smoking of patients in terms of the amount of smoking, nicotine dependence, CO level, and urine cotinine. The study design was a multi-repeat multiple repeat intermittent time series study with one-group, a pre-post design. The participants were 47 smoking patients (44 males and 3 females), who were treated at a public hospital in N city. The participants were 4 (8.51%) subjects in the action stage and 43 subjects (91.49%) in the preparation stage of the motivation stage. The coaching program intervention was conducted at the first day, second week, and 6th week. The smoking cessation maintenance of the subjects was checked at the 12th week. A chi-square test and t-test were used to analyze the data. The subjects in the action stage were kept under the condition of no smoking and nicotine dependence. After the program of subjects in the preparation stage, the amount of smoking, nicotine dependence, and CO level were significantly lower compared to the pre-test (p<.001). The findings suggest that the coaching program based on the motivation stage was effective in improving the smoking cessation for patients who smoke. On the other hand, the patients in the smoking cessation program may require much more financial assistance than those of healthy people. A greater workforce and budget will be needed for patients to stop smoking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2189-2198
• /
• 2012

This study was designed to measure the difference in health-related quality of life (HRQOL) among social classes and explore the factors that may explain it. Study subjects were 7,992 Korean adults aged 20-69 from the 4th (2007-2009) Korea National Health and Nutrition Examination Surveys data. We described mean value of EQ-5D index as a HRQOL by class and performed hierarchical multiple regression analysis to find the factors. The result was as follows. In the distribution of EQ-5D index level among social classes, new middle class (class II) had the highest score (0.966 in men and 0.955 in women); upper and middle-upper class (class I) 0.965 in men and 0.936 in women; working class (class IV) 0.958 in men and 0.936 in women; old middle class (class III) 0.955 in men and 0.932 in women; low class (class VI) 0.941 in men and 0.908 in women; and rural self-management class (class V) the lowest score (0.918 in men and 0.866 in women). In men, chronic disease, job stress, education and income level were found to make the difference in the health-related quality of life among social classes; in women, those factors and health behavior explained the difference. In conclusion, the lower social class has lower HRQOL. Except for education and income level, chronic disease may be the major factor to explain the difference in the health-related quality of life among social classes.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.254-266
• /
• 1997

This study was to know the usefulness of argon laser for composite resin, to prove the polymerized effect of heat treatment of composite resin inlay and to get the curing method for optimal physical properties of composite resin inlay. In this study we used four light curing units and one heat curing unit: Visilux $II^{TM}$, a visible light gun: $SPECTRUM^{TM}$, an argon laser: Unilux AC$^{(R)}$ and Astorn XL$^{(R)}$, visible light curing unit: CRC-$100^{TM}$ for heat treatment. Compared to a control group, we divided the experemental groups into five as follows: Control group: Light curing(Visilux $II^{TM}$) Experimental group 1 : Light curing(Visilux $II^{TM}$) + Light curing(Unilux AC$^{(R)}$) Experimental group 2: Light curing(Visilux $II^{TM}$) + Light curing(Astron XL$^{(R)}$) + Heat treatment(CRC-$100^{TM}$) Experimental group 3 : Laser curing($SPECTRUM^{TM}$) Experimental group 4 : Laser curing($SPECTRUM^{TM}$) + Light curing(Unilux AC$^{(R)}$) Experimental group 5 : Laser curing($SPECTRUM^{TM}$) + Light curing(Astron XL$^{(R)}$) + Heat treatment (CRC-$100^{TM}$) According to the above classification, we made samples through the curing of Clearfil CR Inlay$^{(R)}$, which is a composite resin for inlay, in a separable cylindrical metal mold and polycarbonate plate. And then, we measured and compared the value of compressive strength, diametral tensile strength and the surface micro hardness of each sample. The results were as follows : 1. Among the experimental groups, group 5 showed the highest value of compressive strength, $157.50{\pm}10.24$ kgf and control group showed the lowest value of compressive strength, $103.93{\pm}21.93$ kgf. Control group showed significant difference with the experimental groups(p<0.001). Group 2 which was treated by the heat showed higher compressive strength than that of group 1 which was not, and there was significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was significant difference group 4 and group 5(p<0.001). 2. Among the experimental groups, group 5 showed the highest value of diametral tensile strength, $95.84{\pm}1.97$ kgf and control group showed the lowest value of diametral tensile strength, $81.80{\pm}2.17$ kgf. Control group which was cured by visible light showed higher diametral tensile strength than group 3 which was cured Argon Laser. Group 2 which was treated by heat showed higher compressive strength than that of group 1 which was not, and there was significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was a significant difference group 4 and group 5(p<0.001). 3. Among the experimental groups, group 5 showed the highest value of microhardness of top surface, $148.42{\pm}9.57$ kgf and control group showed the lowest value of microhardness, $111.43{\pm}7.63$ kgf. In the case of bottom surface, group 5 showed the highest value of $146.19{\pm}7.62$ kgf, and control group showed the lowest, $104.03{\pm}11.05$ kgf. Group 3 which was cured by Argon Laser showed higher diametral tensile strength than control group which was cured only with a visible light gun. Group 2 which was treated by heat showed higher compressive strength than that of group 1 which was not, and there was a significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was a significant difference group 4 and group 5(p<0.001). 4. According to the above results, we took a conclusion that argon laser can be used as a useful unit for curing the composite resin and heat treatment can improve the physical properties of the composite resin inlay.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.130-137
• /
• 2007

This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.