• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.120-130
• /
• 1996

Crisphead lettuce(Lactuca sativa L.) was grown in NFT to investigate the effects of NO$_3$-N and NH$_4$-N ratio in nutrient solution and elevated $CO_2$ treatment in the crisphead lettuce growth. This experiment has been conducted under three different ratios of NO$_3$-N:NH$_4$-N(100:0, 75:25, 50:50) with two $CO_2$ concentration (control, 1500ppm ). The results are as follows; 1. In the case of not controlling pH and EC in nutrient solution, pH was gradually increased in NO$_3$-N:NH$_4$-N=100:0 treatment but rapidly decreased in the nutrient solution 2. Daily changes of NO$_3$-N and NH$_4$-N were observed without controlling the nutrient solution. In the treatments of NO$_3$-N:NH$_4$-N ratios were 75:25 and 50:50, NO$_3$-N absorption rates were 27.7% and 26.1%, while NH$_4$-N absorption rates were 87.9% and 71.2%, respectively. 3. There was little differences in total nitrogen of leaves. However phosphorus, potassium, calcium and magnesium contents were highly shown in the treatment of $CO_2$ 1500ppm and 100:0 ratio of NO$_3$-N:NH$_4$-N. 4. Higher $CO_2$ assimilation rate was shown in plants grown under $CO_2$ 1500ppm and 100:0 ratio of NO$_3$-N:NH$_4$-N. It dropped significantly with the increase of NH$_4$- N rates in nutrient solution. 5. Fresh weight, leaf number, root length and root weight of crisphead lettuce were far better in the treatment of $CO_2$ 1500ppm and 100:0 ratio of NO$_3$-N:NH$_4$-N. Growth differences by $CO_2$ elevation were not shown in other NO$_3$-N:NH$_4$-N treatments. 6. The highest nitrate contents of leaves were shown in NO$_3$-N single treatment but shown the lowest vitamin C contents. Nitrate contents of leaves were decreased by $CO_2$ but the effect was slight treatment.

• Journal of Bio-Environment Control
• /
• v.11 no.1
• /
• pp.35-39
• /
• 2002

This study was conducted to investigate the effect of early $CO_2$ enrichment during seedling stage on long-term $CO_2$ enrichment after transplanting in the culture of pat-choi (Brassica campesris L), spinach (Spinacia oeracea L.), and leaf lettuce (Lactuca saliva L). During seedling stage, $CO_2$enrichment had significantly higher fresh and dry weight and leaf area of the top parts (above ground) of all three plant species than the control (no $CO_2$ enrichment). About 53%, 70% , and 40% increase in fresh weight of the top parts of pak-choi, spinach, and leaf lettuce were observed, respectively. Also, in seedling stage, dry weights of roots of spinach and leaf lettuce were significantly increased by early $CO_2$ enrichment. Relative fresh weight increment, compared with fresh weight of the control, in the top parts of roll three plants showed the highest values in 10 days after $CO_2$ enrichment treatment. In the long-term $CO_2$ enrichment experiment, early $CO_2$ enrichmented plants had 20% greater leaf area than the control in all three leafy vegetables. Fresh and dry weights of top parts of early $CO_2$-treated plants were also increased from 10 to 20%, as compared with the control plants. However, these increasement rates in the long-term $CO_2$ enrichment were lower than those seedling stage, which had 30-60% increment-rates. After transplanting, photosynthetic rate of each leafy vegetable in the control treatment slowly decreased, but those rates of early $CO_2$ enriched plants rapidly decreased.

• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.896-899
• /
• 1999

A carbon dioxide gas sensor was studied as a function of temperature and $CO_2$concentration in the Li$_2$ZrO$_3$ system. Lithium zirconate(Li$_2$ZrO$_3$) was synthesized by the heat-treatment of zirconia(ZrO$_2$)and Lithium carbonate(Li$_2$CO$_3$). The specimens were prepared both as bulk disk, 10mm in diameter and 1.0mm thickness, and thick films on an alumina substrate. Lithium zirconate readily responded to $CO_2$concentration from 0.1% to 100% in the range of 45$0^{\circ}C$ to $650^{\circ}C$. The sensitivity to $CO_2$ was dependent on the measuring temperature. Lithium zirconate(Li$_2$ZrO$_3$) decomposes into Li$_2$CO$_3$ and ZrO$_2$after the reaction with $CO_2$in the range of 45$0^{\circ}C$ to $650^{\circ}C$. Li$_2$CO$_3$ changes into Li$_2$O and $CO_2$ above $650^{\circ}C$. The material showed difficulty with reversibility and recovery. The optimum temperature for the highest sensitivity is around 55$0^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.7 no.12
• /
• pp.1027-1032
• /
• 1997

본 연구에서는 용사용WC-17%Co 복합분말을 분무건조법으로 제조하고 열처리 온도(85$0^{\circ}C$, 100$0^{\circ}C$, 115$0^{\circ}C$, 130$0^{\circ}C$)에 따른 조립분말의 미세구조, 입도분포, 유동도, 및 결정상변화를 고찰하였다. 분무건조상태의 입형은 구형이었으며, 입도분포, 평균입자크기, 유동성은 각각 20.6-51.7$\mu\textrm{m}$, 27.2$\mu\textrm{m}$, 0.26 sec/g 이었다. 열처리에 의하여 조립분말은 치밀화되어 130$0^{\circ}C$ 열처리 후에는 입도분포와 평균입자크기가 각 각 6.9-37.9$\mu\textrm{m}$과 17.8$\mu\textrm{m}$로 감소하였으며, 유동성은 0.12 sec/g로 향상되었다. 열처리중에 WC와 Co의 상화확산에 의하여 Co$_{6}$W$_{6}$C및 Co$_{3}$W$_{3}$C이 생성되었으며, 두 상이 나타나는 임계온도는 115$0^{\circ}C$이었다.

• Journal of Powder Materials
• /
• v.1 no.1
• /
• pp.42-51
• /
• 1994

6061Al-SiCP metal matrix composite materials(MMCs) were fabricated by injecting SiCP particles directly into the atomized spray. The main attraction of this technique is the rapid fabrication of semi-finished, composite products in a combined atomization, particulate injection(10 $\mu\textrm{m}$, 40 $\mu\textrm{m}$, SiCP) and deposition operation. Conclusions obtained are as follows; The microstructure of the unreinforced spray formed 6061Al alloy consisted of relatively fine(50 $\mu\textrm{m}$) equiaxed grains. By comparision, the microstructure of the I/M materials was segregated and consisted of relatively coarse(150 $\mu\textrm{m}$) grains. The probability of clustering of SiCP particles in co-sprayed metal matrix composites increased it ceramic particle size(SiCP) was reduced and the volume fraction was held constant. Analysis of overspray powders collected from the spray atomization and deposition experiments indicated that morphology of powders were nearly spherical and degree of powders sphercity was deviated due to composite with SiCp particles. Interfacial bonding between matrix and ceramics was improved by heat treatment and addition of alloying elements(Mg). Maximum hardness values [Hv: 165 kg/mm2 for Al-10 $\mu\textrm{m}$ SiCp Hv--159 kg/mm2 for Al-40 $\mu\textrm{m}$SiCp] were obtained through the solution heat treatment at $530^{\circ}C$ for 2 hrs and aging at $178^{\circ}C$, and there by the resistance were improved.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.275-280
• /
• 1999

This study was conducted to investigate the effects of $CO_2$ concentration(310 or 950$\mu$ mol.mol$^{-1}$ ) and air current speed(0.3, 0.5, 0.7 or 0.9m.s$^{-1}$ ) on the growth and development of eggp1ant Plug seedlings (Solanum melongena L.) under artificial 1ighting. For the treatment of $CO_2$ enrichment, stem length and diameter, the ratio of stem length to stem diameter, plant height, leaf area, net photosynthetic rate, top dried weight were significantly different at 1% level. Stem length of plug seedlings decreased at the condition under enriched $CO_2$ and high air current speed above plug stand. Stem diameter of plug seedlings increased and plant height decreased with the increasing $CO_2$ concentration. Plug seedlings had maximum net photosynthetic rate at the air current speed of 0.7m.s$^{-1}$ . Net photosynthetic rate at $CO_2$ concentration of 950$\mu$mol.mol$^{-1}$ increased by 46% than those at 310$\mu$mol.mol$^{-1}$ . Thus $CO_2$ enrichment would be effective for the production of plug seedlings with high quality.

• The Korean Journal of Ceramics
• /
• v.4 no.1
• /
• pp.15-19
• /
• 1998

Defects formation of Chemical Vapor Deposition (CVD) diamond on $^4He^{2+}$ irradiation and after remote hydrogen plasma treatment(RHPT) were investigated by cathodoluminescence(CL). As calculated in the TRIM simulation, the light elements of $^4He^{2-}$ can be penetrated into the diamond bulk structure at 3~4 $\mu\textrm{m}$ depth. The effects of the implantation region were observed when 5 keV~20 keV electron energy (insight 0.3~4.0$\mu\textrm{m}$) of CL measurement was irradiated to diamond at temperature 80 K. After the RHPT, rehybridization of irradiation damaged diamond was studied. The intensity of 5RL center(intrinsic defect of C) was diminished. The 2.16 eV center (N-V center) occurring usually by annealing could not be seen after RHPT. The diamond was rehybridized by hydrogen radicals without etching and thermal degradation by the RHPT.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.62-62
• /
• 2003

This study was carried out to investigate the effects of activation agents on parthenogenetic activation of pig oocytes matured in vitro. The medium used for oocyte maturation was tissue culture medium (TCM) 199 supplemented with 26.19 mM sodium bicarbonate, 0.9 mM sodium pyruvate, 10 $\mu\textrm{g}$/ml insulin, 2 $\mu\textrm{g}$/ml vitamin $B_{l2}$, 25 mM Hepes, 10 $\mu\textrm{g}$/ml bovine apotransferrin, 150 $\mu$M cysteamine, 10 IU/ml PMSG, 10 IU/ml hCG, 10 ng/ml EGF, 0.4% BSA, 75 $\mu\textrm{g}$/ml sodium penicillin G, 50 $\mu\textrm{g}$/ml streptomycin sulfate and 10% pFF. After about 22 h of culture, oocytes were cultured without cysteamine and hormones for 22 h at 38.5$^{\circ}C$, 5% $CO_2$ in air. Cumulus-free oocytes involving first polar body were activated by exposure to various concentrations of ethanol and exposure time of ethanol in Hepes-buffered NCSU23 medium. Also, oocytes were activated by electric pulse alone or combination with ethanol. For electrical activation, oocytes were rinsed twice in 0.3 M mannitol solution supplemented with 0.1 mM CaC1$_2$, 0.2 mM MgC1$_2$, 0.5 mM Hopes and 0.01% BSA, and transferred to a chamber consisting of two electrodes 1 mm apart which was overlaid with the same activation solution. Oocytes were activated with a single DC pulse of 1.3 ㎸/cm for 30 $\mu$sec. After activation treatments, oocytes were washed three times with Hepes-buffered NCSU23 medium and were washed twice with NCSU23 culture medium containing 0.4% BSA, and then cultured in 500 ${mu}ell$ of the same medium for 20 h at 38.5$^{\circ}C$, 5% $CO_2$ in air. The activation rates of oocytes were higher in 6, 7 and 8% ethanol concentrations compared with 0, 5, 9 and 10% ethanol concentrations. Significantly more oocytes (29.3~33.7%) were activated in the exposure for 8, 10, 12 and 15 min than those in the exposure for 0 and 5 min, but there was no difference due to exposure to 8% ethanol for 8 to 15 min. Electric pulse treatment followed by exposure to ethanol significantly improved the rate of oocyte activation (61.9%) compared with that of other 3 treatments. In conclusion, the optimal activation treatment of ethanol exposure alone for the in-vitro matured pig oocytes was 8% ethanol for 8 to 15 min. Electric pulse treatment followed by ethanol exposure significantly improved the rate of activation.n.

• Journal of the Korean Ceramic Society
• /
• v.29 no.3
• /
• pp.195-201
• /
• 1992

It had been studied the structure and the magnetic properties of singel phase Co2Y(Ba2Co2Fe12O22) powder, one of the hexagonal ferrite. The material was successfully prepared by a commercially applicable coprecipitation method. Adding asqueous solution of BaCl2, CoCl2 and FeCl2(Ba2+:Co2+:Fe2+=1:1:6 in mole ratio) to a mixture of NaOH and hydrogen peroxide solution, coprecipitate was formed with rapid oxidation of ferrous to ferric ion. The coprecipitate transformed to single phase Co2Y powder at heat treatment temperatures as low as 900$^{\circ}C$. The shape of Co2Y particles obtained at 900$^{\circ}C$ was hexagonal plate-like (diameter∼$\mu\textrm{m}$, aspect ratio>10). The structure of the Co2Y was refined by a Rietveld analysis of the measured X-ray diffractogram. The lattice parameters are ao=5.8602${\AA}$ and co=43.512${\AA}$. Co2Y is a soft magnetic material with saturation magnetization 30 emu/g and coecivity 170 . A standard X-ray diffraction pattern for Co2Y is proposed as well.

• Journal of Welding and Joining
• /
• v.14 no.6
• /
• pp.101-108
• /
• 1996

In this study, WC-l7wt% Co composite powder for thermal spray was fabricated by spray drying method. The agglomerated composite powder had spheroidal morphology and the particle size distribution was 20~60${\mu}{\textrm}{m}$. WC and Co were distributed homogeneously. However, the strength of the spray-dried agglomerate was low due to the pores within the agglomerate. Therefore, the spray-dried agglomerate was broken down during HVOF thermal spray and the microstructure was inhomogeneous with many pores within the coating layer. And the decomposition of WC to W and $W_{6}$ $C_{2.54}$ was accelerated. The strength and flowability of the agglomerate were greatly improved by sintering heat treatment(110$0^{\circ}C$, 1 hour, hi atmosphere), and then the coating layer showed dense and homogeneous microstructure with well-developed splats. The hardness of the coating layer was H $v_{300}$ = 1072.2.2.