• Kyungpook Mathematical Journal
• /
• v.52 no.1
• /
• pp.21-32
• /
• 2012

In this paper a new subclass of multivalent functions with negative coefficients defined by Cho-Kwon-Srivastava operator is introduced. Coefficient estimate and inclusion relationships involving the neighborhoods of p-valently analytic functions are investigated for this class. Further subordination result and results on partial sums for this class are also found.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.50-58
• /
• 2013

In this paper, parallel decimal fixed-point multiplier which uses the limited range of Singed-Digit number encoding and the reduction step is proposed. The partial products are generated without carry propagation delay by encoding a multiplicand and a multiplier to the limited range of SD number. With the limited range of SD number, the proposed multiplier can improve the partial product reduction step by increasing the number of possible operands for multi-operand SD addition. In order to estimate the proposed parallel decimal multiplier, synthesis is implemented using Design Compiler with SMIC 180nm CMOS technology library. Synthesis results show that the delay of proposed parallel decimal multiplier is reduced by 4.3% and the area by 5.3%, compared to the existing SD parallel decimal multiplier. Despite of the slightly increased delay and area of partial product generation step, the total delay and area are reduced since the partial product reduction step takes the most proportion.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.5
• /
• pp.491-499
• /
• 2014

It is important to accurately measure and control the relative humidity of humidified gas entering a PEM (polymer electrolyte membrane) fuel cell stack because the level of humidification strongly affects the performance and durability of the stack. Humidity measurement devices can be used to directly measure the relative humidity, but they cost much to be equipped and occupy spaces in a fuel cell system. We present soft sensors for predicting the relative humidity without actual humidity measuring devices. By combining FIR (finite impulse response) model with PLS (partial least square) and SVM (support vector machine) regression models, DPLS (dynamic PLS) and DSVM (dynamic SVM) soft sensors were developed to correctly estimate the relative humidity of humidified gases exiting a planar-type membrane humidifier. The DSVM soft sensor showed a better prediction performance than the DPLS one because it is able to capture nonlinear correlations between the relative humidity and the input data of the soft sensors. Without actual humidity sensors, the soft sensors presented in this work can be used to monitor and control the humidity in operation of PEM fuel cell systems.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1812-1824
• /
• 2016

The neural dynamics underlying the causal network during motor planning or imagery in the human brain are not well understood. The lack of signal processing tools suitable for the analysis of nonlinear and nonstationary electroencephalographic (EEG) hinders such analyses. In this study, noise-assisted multivariate empirical mode decomposition (NA-MEMD) is used to estimate the causal inference in the frequency domain, i.e., partial directed coherence (PDC). Natural and intrinsic oscillations corresponding to the motor imagery tasks can be extracted due to the data-driven approach of NA-MEMD, which does not employ predefined basis functions. Simulations based on synthetic data with a time delay between two signals demonstrated that NA-MEMD was the optimal method for estimating the delay between two signals. Furthermore, classification analysis of the motor imagery responses of 29 subjects revealed that NA-MEMD is a prerequisite process for estimating the causal network across multichannel EEG data during mental tasks.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.237-242
• /
• 1999

As one of the key parameters to determine $CO_2$ flux between air - sea interface, it is quite important to know p$CO_2$, which has involved much uncertainty, mainly due to the complex variations of sea surface p$CO_2$ and the paucity of samples, made in ocean. In order to improve the interrelationship between partial pressure (p$CO_2$) and different physical and biochemical parameters in global sea surface water, a new empirical relation is established to correlate and parameterize p$CO_2$ in the mixed layer using the data from recent WOCE cruises. Meanwhile, by new empirical relation, abundant historical hydrographic and nutrients ship data, Levitus data set and NOAA/AVHRR(SST), p$CO_2$ have been accumulated and applied. Then effort has to be made fur promotion of this study to correlate and parameterize p$CO_2$ in the mixed Layer with different physical and biochemical parameters. and further attribute this huge historical data sets and NOAA/AVHRR(SST) data to estimate p$CO_2$. In this paper we analyzed more interrelationship between the model and ship/satellite data set. Finally, the inter-annual variations of p$CO_2$ in sea are presented and discussed.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.670-677
• /
• 1991

All models of dynamical systems invariably have some measure of uncertainties associated with some of their dynamics. The recent approaches to establish robustness of stabilizing feedback control against the possible uncertainties have a serious limitation, that is, their applicability only to the systems that satisfy the matching conditions. Such conditions are rarely met in general applications. If a particular system satisfies the matching conditions, the addition of an actuator will destroy the satisfaction of such conditions. In this paper, we develop robust control algorithm for uncertain multivariable systems in which the matching conditions are not necessarily met. In order to eliminate an influence over partial state variables due to unknown constant disturbances we perform the appropriate block-decomposition for a given system. Functional observers are introduced to estimate the unknown constant disturbances. The sliding mode controller is designed in such a way that the partial state variables in the state-space are directed towards switching surfaces and regulated to the origin asymptotically. Numerical examples are discussed as illustrations.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.4
• /
• pp.1003-1031
• /
• 2020

We consider the following Dirichlet initial boundary value problem with a gradient absorption and a nonlocal source $$\frac{{\partial}u}{{\partial}t}-div({\mid}{\nabla}u{\mid}^{p-2}{\nabla}u)={\lambda}u^k{\displaystyle\smashmargin{2}{\int\nolimits_{\Omega}}}u^sdx-{\mu}u^l{\mid}{\nabla}u{\mid}^q$$ in a bounded domain Ω ⊂ ℝ^N, where p > 1, the parameters k, s, l, q, λ > 0 and µ ≥ 0. Firstly, we establish local existence for weak solutions; the aim of this part is to prove a crucial priori estimate on |∇u|. Then, we give appropriate conditions in order to have existence and uniqueness or nonexistence of a global solution in time. Finally, depending on the choices of the initial data, ranges of the coefficients and exponents and measure of the domain, we show that the non-negative global weak solution, when it exists, must extinct after a finite time.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.5
• /
• pp.823-829
• /
• 2015

Objectives: The objective of the study was to investigate the related factors of non-utilization of dental care among Korean adults. Methods: Korean National Health and Nutrition Survey 2012 was carried out in South Korea. A total of 5,589 adults were interviewed and examined. A multinominal logistic regression model was used to estimate the odds ratio with 95% confidence intervals for the non-utilization of dental care. Results: The non-utilization of dental care was shown to have a badly perceived oral health status, less toothbrushing before sleeping(OR=1.18: 95% CI=1.00-1.39), periodontitis symptoms (OR=1.82: 95% CI=1.50-2.22), toothache experience (OR=2.03: 95% CI=1.75-2.34), TMJ symptom experience (OR=3.31: 95% CI=2.74-3.99), speaking problem (OR=1.87: 95% CI=1.75-2.34) and a partial dentures needs (OR=2.49: 95% CI=1.93-3.19). Conclusions: The non-utilization of dental care tended to have badly perceived oral health status, less toothbrushing before sleeping, periodontitis, toothache experience, TMJ symptom experience, speaking problem, and partial dentures needs.

• Journal of Welding and Joining
• /
• v.21 no.6
• /
• pp.77-83
• /
• 2003

The finite element analysis was performed for the cracks existing in residual stress fields in order to investigate the effects of configuration of residual stress distribution to the fatigue crack opening behaviour. And the variation of stress distributions adjacent to the crack caused by uploading was examined. The finite element model with contact elements for the crack plane and plane stress elements for the base material and the analytical method based on the superposition principle to estimate crack opening behaviour and the stress distribution adjacent to the crack subjected to uploading were used. The results of the analysis showed that crack opening behaviors and variations of stress distribution caused by uploading were changed depending on the configuration of residual stress distribution. When the crack existed in the region of compressive residual stress and the configuration of compressive residual stress distribution were inclined, a partial crack opening just behind of a crack tip occurred during uploading. Based on the above results, it was clarified that the crack opening behaviour in the residual stress field could be predicted accurately by the finite element analysis using these analytical method and model.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.130-140
• /
• 1998

This paper presents a method to estimate subpixel accuracy motion vectors using a mathermatical model withoug interpolation. the proposed method decides the coefficients of mathematical model, which represents the motion vector which is achieved by full search. And then the proposed method estimates subpixel accuracy motion vector from achieved mathematical model. Step by step mathematical models such as type 1, type 2, type 3, modified bype 2, modified type 3, and Partial Interpolation type 3 are presented. In type 1, quadratic polynomial, which has 9 unknown coefficients and models the 3by 3 pixel plane, is used to get the subpixel accuracy motion vectors by inverse matrix solution. In type 2 and 3, each quadratic polynomial which is simplified from type 1 has 5 and 6 unknown coefficients and is used by least square solution. Modified type 2 and modified type 3 are enhanced models by weighting only 5 pixels out of 9. P.I. type 3 is more accurate method by partial interpolation around subpixel which isachieved by type 3. LThese simulation results show that the more delicate model has the better performance and modified models which are simplified have excellent performance with reduced computational complexity.