• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.10
• /
• pp.1193-1201
• /
• 2004

The effect of equivalence ratio and fuel/air mixing quality on the phase-resolved gas temperatures at different phases of the oscillating pressure cycle was experimentally investigated. An atmospheric pressure, optically accessible and laboratory-scale dump combustor operating on methane with heat release rate of 1.59kW was used. Temperature measurements were made using coherent anti-Stokes Raman spectroscopy (CARS) at several spatial locations fur typical unstable combustion conditions. Analysis was conducted using parameters such as phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs). Also the probability on the occurrence of high temperature (over 1900K) was investigated to get the information on the perturbation of equivalence ratio and NOx emission characteristics. It was shown that most of temperature histograms exhibit Gaussian profile which has short breadth of temperature fluctuation at equivalence ratio of 0.6, while beta profile was predominant for the cases of other equivalence ratios (${\Phi}$=0.55, 0.50). It was also shown that phase-resolved averaged temperature oscillated in phase with pressure cycle, while normalized standard deviations which represent temporal turbulent intensity of temperature showed nearly constant value around 0.1. The characteristics on the occurrence of high temperature also displayed periodic wave form which was very similar to the pressure signal. And the amplitude of this profile went larger as the fuel/air mixing quality became poorer. These also provided additional information on the perturbation of equivalence ratio at flame as well as NOx emission characteristics.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.103-108
• /
• 2003

The effect of equivalence ratio and fuel/air mixing quality on the phase-resolved gas temperatures at different phases of the oscillating pressure cycle was experimentally investigated. An atmospheric pressure, optically accessible and laboratory-scale dump combustor operating on methane with heat release rate of 1.59kW was used. Temperature measurements were made using coherent anti-Stokes Raman spectroscopy (CARS) at several spatial locations for typical unstable combustion conditions. Analysis was conducted using parameters such as phase-resolved averaged temperature, normalized standard deviation and temperature probability distribution functions (PDFs). Also the probability on the occurrence of high temperature (over 1900K) was investigated to get the information on the perturbation of equivalence ratio and NOx emission characteristics. It was shown that most of temperature histograms exhibit Gaussian profile which has short breadth of temperature fluctuation at equivalence ratio of 0.6, while beta profile was predominant for the cases of other equivalence ratios (${\Phi}$=0.55, 0.50). The characteristics on the occurrence of high temperature also displayed periodic wave form which is very similar to the pressure signal. And the amplitude of this profile goes larger as the fuel/air mixing quality become poorer. These also provided additional information on the perturbation of equivalence ratio at flame as well as NOx emission characteristics.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.293-302
• /
• 2005

This study describes data from determination of the optimum mix proportion and site application of the mass concrete placed in bottom slab and side wall having a large depth and section as main structures of LNG in-ground tank. This concrete requires low heat hydration, excellent balance between workability and consistency because concreting work of LNG in-ground tank is usually classified by under-pumping, adaptation of longer vertical and horizontal pumping line than ordinary pumping condition. For this purpose, low heat Portland cement and lime stone powder as cementitious materials are selected and design factors including unit cement and water content, water-binder ratio, fine aggregate ratio and adiabatic temperature rising are tested in the laboratory and batch plant. As experimental results, the optimum unit cement and water content are selected under $270kg/m^3$ and $l55{\~}l60 kg/m^3$ separately to control adiabatic temperature rising below $30^{\circ}C$ and to improve properties of the fresh and hardened concrete. Also, considering test results of the confined water ratio($\beta$p) and deformable coefficient(Ep), $30\%$ of lime stone powder by cement weight is selected as the optimum replacement ratio. After mix proportions of 5cases are tested and compared the adiabatic temperature rising($Q^{\infty}$, r), tensile and compressive strength, modulus of elasticity, teases satisfied with the required performances are chosen as the optimum mix design proportions of the side wall and bottom slab concrete. $Q^{\infty}$ and r are proved smaller than those of another project. Before application in the site, properties of the fresh concrete and actual mixing time by its ampere load are checked in the batch plant. Based on the results of this study, the optimum mix proportions of the massive concrete are applied successfully to the bottom slab and side wall in LNG in-ground tank.

• Nuclear Engineering and Technology
• /
• v.19 no.2
• /
• pp.107-114
• /
• 1987

Using a solution of $^{137}$ Cs as a tracer, radioactivity of a $^{137}$ Cs solution is measured by coincidence and anticoincidence counting methods. Sample sources in this study are fabricated by mixing $^{137}$ Cs with tracer, and the mixing ratios are 1/3 and 1/5, respectively in coincidence and anticoincidence methods. Specific activities of a $^{137}$ Cs solution are calculated by means of f-channel low energy threshold level variation and efficiency extrapolation. The results obtained by coincidence and anticoincidence counting methods are 552.78 kBq/g and 554.32kBq/g, respectively on the reference date and the combined uncertainties are 1.60kBq/g and 1.51kBq/g for each method. These two results show a good agreement within the uncertainty range.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.645-653
• /
• 2021

Biopolymer is a general concept for high molecular compounds produced by living organisms. Among them, the xanthan and β-glucan, which are organic polymer mixture produced by micro-organisms, are mainly used to increase the viscosity of a substance. And diluting in water and mixing with sand or clay can increase compressive strength and shear strength. In this study, mixed soil prepared by mixing soil with xanthan and beta-glucan based biopolymers specially developed for the purpose of increasing soil strength was applied to the river bank revetment, and changes during winter were measured using ground LiDAR. As a result of analyzing winter changes in major sections using three-dimensional point cloud data obtained through ground LiDAR, there were no changes to the extent that it was difficult to confirm with the naked eye in the two sections coated with biopolymer blended soil. However, soil loss due to Rill erosion was confirmed in the natural embankment section where biopolymer blended soil was not used.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.91-99
• /
• 2007

Activities of the extracellular enzyme from Fomitopsis palustris, a brown-rot fungi, and by which crystallinity changes of cellulose in the various softwoods, such as Larix leptolepsis, Finns rigida, Finns koraiensis and Finns densiflora by liquid culture, were investigated. Activity of Cellobiohydrolase (CBH) from F. palustris was detected in the every test softwoods culture, showing activities of the Endoglucanase (EG), $\beta$-glucosidase (BGL) and $\beta$-1,4-xylosidase (BXL). It was shown high enzyme activities in the sapwood culture than heartwood of the same wood species, However, the enzyme activities in most of test wood cultures increased with longer incubation time, indicating a possibility of intermix sapwood and heartwood for degradation process by enzyme. Also it was shown that protein patterns of the extracellular enzyme from F. palustris in wood particle substrate of the several domestic softwoods were similar with each other wood species, which suggested the possibility of mixing all softwoods in saccharification by enzyme from F. palustris. Crystallinity reduction value of cellulose by F. palustris was 4.2~20.4% in 4 weeks cultivation, 12.9~28.9% in 8 weeks.

• Journal of Periodontal and Implant Science
• /
• v.38 no.2
• /
• pp.163-170
• /
• 2008

Purpose: Biphasic calcium phosphates have been of great interest recently. Mixing adequate ratios of hydroxyapatite(HA) and beta-tricalcium phosphate($\beta$-TCP) allowed to control the resorption rate without distorting its osteoconductive property. This study evaluated the bone formation effect of newly developed biphasic calcium phosphate(BCP) in calvarial defect of rabbits. Materials and Methods: 6 male New Zealand rabbits were used. Four defects with 8mm in diameter were created on each animal. BCP with HA/$\beta$-TCP ratio of 7:3 and particle size of $0.5{\sim}1.0\;mm$ was used as the test group and bovine bone with $0.25{\sim}1.0\;mm$ particle size, as the control group. Both test and control group materials were randomly implanted in the calvarial defects and were covered witha polymer membrane. The animals were sacrificed after 12, 24, and 48 weeks of implantation under general euthanasia. Resin blocks were obtained and were stained by masson's trichrome for histological observation. Results: Overall results were uneventful without any defect exposure or inflammation. The amount of new bone formation and bone maturity increased with increase in healing period at both groups. New bone in test group was mostly formed along the material particle surrounded by osteoblasts, and observation of osteoblastic stream was also present. Bone maturity increased as it was closer to thedefect margins. Under the same healing period, the test group showed more bone formation than the control group with more stable bovine bone particles remaining even after 48 weeks, whereas considerable resorption took place in BCP. Almost total defect closure was observed in test group with new bone formation in the central part of the defect. However, limited new bone formation was observed in the control group. Conclusion: Within the limits of the study, the present study reveals the newly developed BCP to be a good osteoconductive material. However, further studies are needed to be conducted in a different study model with a larger sample size.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.4
• /
• pp.247-258
• /
• 2019

Background: Astragali radix (A) and Lithospermi radix (L) have long been used as traditional medicines due to their known anti-inflammatory effects. This study aimed at evaluating, their optimal mixing ratio and their functional compounds by investigating the inhibitory effects of mixed extracts of A and L and their active compounds on matrix metalloproteinases (MMPs). Methods and Results: A and L extracts were obtained by extraction at $80^{\circ}C$ using 50% and 70% fermented alcohol, respectively, and then mixed at a ratio of 5 : 5, 6 : 4, 7 : 3 and 8 : 2 (w/w). The activities of MMP-1, MMP-3, and MMP-13 were evaluated in interleukin-1beta ($IL-1{\beta}$)-induced SW1353 cells. The extract mixtures showed synergistic inhibitory effects on MMP-3 and MMP-13, higher than the effects of the individual A and L extracts. The 7 : 3 mixture (ALM16) showed the most effective MMPs inhibitory activity, while among the active ingredients, calycosin-7-O-${\beta}$-D-glucoside and lithospermic acid exhibited excellent MMPs inhibitory activity. Additionally, an HPLC method was established for simultaneous quantification of the effective components of the extract mixtures, and validated by measuring the linearity, precision and accuracy of the limit of detection (LOD) and limit of quantification (LOQ). Conclusions: ALM16 showed the most effective MMPs inhibitory activity. Calycosin-O-${\beta}$-D-glucoside, calycosin and lithospermic acid were identified as useful candidates, as they were the major functional compounds in the MMP inhibitory activity. Summarily, ALM16 might be a highly effective in osteoarthritis management, owing to its because it exhibits a protective effect on cartilage via excellent inhibition of MMPs.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.4
• /
• pp.267-279
• /
• 1992

Microencapsulations of amoxicillin and cephalexin, using Eudragit RS, RL, E, S and L were investigated. The microcapsules were prepared by the solvent evaporation process in liquid paraffin phase, which is based on dispersion of acetone/isopropanol containing the drug in liquid paraffin. Aluminium tristearate was used as an additive for the preparation of microcapsules. The size distribution, dissolution test and observation by SEM were examined. Good reproducibility in microcapsule preparation was observed. The microcapsules obtained were spherical and free-flowing particles. The dissolution rates of amoxicillin and cephalexin from the microcapsules were considerably decreased as compared with those from amoxicillin and cephalexin powder, respectively. As the dispersing agents (aluminium tristearate) increased, the particle size of microcapsules decreased and the dissolution rate increased. In order to control the release rate of drugs, microcapsules were prepared by mixing Eudragit RS/RL or Eudragit S/L. As Eudragit RL ratio in microcapsule of Eudragit RS/RL increased, the dissolution rate increased. As Eudragit L ratio in microcapsule of Eudragit S/L increased, the dissolution rate increased. Furthermore, the release rates of drugs from Eudragit RS/L or RS/polyelthylene glycol 1540 (PEG 1540) were examined. The dissolution rate of drugs increased with increasing of Eudragit L or PEG 1540 ratio. In conclusion, the release rates of drugs from Eudragit RS/RL or RS/PEG 1540 microcapsule could be controlled, and these microcapsules will be convenient for reducing frequency of administration.

• Journal of Korea Game Society
• /
• v.15 no.2
• /
• pp.105-114
• /
• 2015

We propose a real time user interface that utilizes emotion recognition by physiological signals. To improve the problem that was low accuracy of emotion recognition through the traditional EEG(ElectroEncephaloGram), We developed a physiological signals-based emotion recognition system mixing relative power spectrum values of theta/alpha/beta/gamma EEG waves and autonomic nerve signal ratio of ECG (ElectroCardioGram). We propose both a data map and weight value modification algorithm to recognize six emotions of happy, fear, sad, joy, anger, and hatred. The datamap that stores the user-specific probability value is created and the algorithm updates the weighting to improve the accuracy of emotion recognition corresponding to each EEG channel. Also, as we compared the results of the EEG/ECG bio-singal complex data and single data consisting of EEG, the accuracy went up 23.77%. The proposed interface system with high accuracy will be utillized as a useful interface for controlling the game spaces and smart spaces.