• Journal of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.301-306
• /
• 1986

The rate constants for the solvolysis reactions of p-methoxybenzylchloride in ethanol-water mixtures were determined at 2$^{\circ}$ and 10$^{\circ}C$ up to 1600bar. Rates of reaction were increased with increasing temperature and pressure, and decreased with increasing solvent composition of ethanol mole fraction. From the rate constants, the values of the activation parameters (${{\Delta}V_o}^{\neq},\;{\Delta}{\beta}^{\neq},\;{\Delta}H^{\neq},\;and\;{\Delta}S^{\neq}$) were evaluated. The values of ${{\Delta}V_o}^{\neq}$ and ${\Delta}{\beta}^{\neq}$ exhibit the extremum behavior at about 0.30 mole fraction of ethanol. This behavior is discussed in terms of solvent structure variation. From these results, it could be postulated that the reaction proceeds through $S_N1$ mechanism.

• Journal of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.207-214
• /
• 1987

Rates of solvblysis of benzyl chloride in ethanol-water mixtures have been measured at 30 and $40^{\circ}C$ under various pressures up 1.6 kbar. The plots of 1n k as a function of pressure are fitted to a second order function in p, and values of ${\Delta}V^{\neq}$and ${\Delta}{\beta}^{\neq}$ are obtained from the results. Also the values of various pseudo thermodynamic quantities were evaluated from the rate constants. The relationships of the 1n k to $Q_w$ or 1n $C_w$ indicate that the reaction proceeds through $S_N1$ mechanism. A comparison between the present and the previous results gives that the increasing order of ${\mid}{{\Delta}V_0}^{\neq}{\mid}$ and n-values are $p-Cl>p-H>p-CH_3$ and $p-CH_3>p-H.p-Cl$, respectively. From these results, it is believed substituent such as the $p-CH_3$group favors the $S_N1(1)$ character, while the p-Cl group leads to the $S_N1(2)$ character.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.165-173
• /
• 2013

The purpose of this study was to evaluate the surface change after 15% carbamide peroxide home bleaching to various restorative materials (composite resin [CR], resin modified glass ionomer [RMGI] and glass ionomer [GI]) and to observe the effect of surface condition of the materials on re-staining. Three esthetic restorative materials (Filtek Z250, 3M, USA; Fuji II LC, GC, Japan; Fuji II, GC, Japan) were used in this study. Twenty specimens per material group were made and divided into two groups (bleached and control). The specimens were immersed in coffee after applying bleaching agent. The color change and surface roughness were measured before and after bleaching and after immersion in coffee. The data were analyzed with SPSS 18.0. The results were as follows: 1. The color of all experiment groups was significantly changed after bleaching (p<0.05). RMGI was the greatest value of ${\Delta}E^*$ and ${\Delta}L^*$. GI and CR groups were in ordering (p<0.05). The ${\Delta}a^*$ value was decreased GI, RMGI and CR. RMGI was only significantly decreased in ${\Delta}b^*$ value (p<0.05). 2. The surface roughness before and after bleaching was significantly different on CR, RMGI and GI (p<0.05). 3. After staining with coffee, the value of ${\Delta}E^*$ was increased in GI, RMGI and CR, furthermore GI and RMGI showed significant difference in the bleaching groups (p<0.05). The ${\Delta}L^*$ value of GI and RMGI was significantly decreased. 4. The change of surface roughness after staining was not significantly different in all groups (p>0.05). The maintenance of color stability in esthetic restorations is one of the most important properties. Tooth whitening is for the aesthetic. Therefore, dental professionals should notice to patients about re-staining after tooth whitening. They should give an instruction that how to prevent and which kinds of agents could be stained.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.45-54
• /
• 2008

The purpose of this study was to investigate the performance of precast segmental PSC bridge columns with regard to P-delta effects. A model of precast segmental PSC bridge columns was tested under a constant axial load and a cyclically reversed horizontal load. A computer program, RCAHEST(Reinforced Concrete Analysis in Higher Evaluation System Technology), was used for the analysis of reinforced concrete structures. In addition to the material nonlinear properties, an algorithm for the problem of large displacement that may result in additional deformation has been formulated using total Lagrangian formulation. This study documents the testing of precast segmental PSC bridge columns under cyclic loading, and presents conclusions based on the experimental and analytical findings.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.1
• /
• pp.92-100
• /
• 1995

The effect of different anisotropy and stress ratio on fatigue crack propagation behavior was investigated under various stress ratio(R=-0.4, -0.2, 0.2, 0.2, 0.4) using pure titanium sheet used in aerospace, chemical and food industry. The rack closure behavior under constant load amplitude fatigue crack propagation test was examined. Fatigue crack propagation rate da/dN was estimated in terms of effective stress intensity factor range, $\Delta$K$_{eff}$, regardless of various stress ratio but was influenced by anisotropy. Also, it was found that the effect of anisotropy was considerably decreased but still not negligible when he da/dN was evaluated by a conventional parameter, $\Delta$$K_{eff}$/E and when the modified da/dN.$\sqrt{\varepsilon}_f$ was evaluated by $\Delta$$K_{eff}$/E. On the other hand, da/dN could be evaluated uniquely by effective new parameter, $\Delta$K$_{eff}$/$sigma_{ys}$, regardless of anisotropy, as int he following equation da/dN=C''[\frac{{\Delta}K_{eff}}{{\sigma}_{ys}}]^{n''}. And effective stress intensity factor range ratio, U was estimated by the following equation with respect to the ratio of reversed plastic zone size, $\Delta r_{p}$ to monotonic plastic zone size, $r_p$ regardless of stress ratio and anisotropy. U=-4.45$(\Delta r_{p}/r_{p})^{2}$+4.1$(\Delta r_{p}/r_{p})$+0.245_{p})$+0.245

• Journal of the Korean Applied Science and Technology
• /
• v.9 no.2
• /
• pp.149-156
• /
• 1992

Levels of total lipids in the seeds of three species of the Pinaceae family were determined and their fatty acid compositions were also analyzed by a gas-chromatograph equipped with a capillary column coated with Carbowax 20M. The results are summarized as follows: Lipid contents of the seeds amounted to 56.9% in P. koraiensis, 29.9% in P. thunbergii, and 21.2% in P. rigida. In all lipids 19${\sim}$20 fatty acid were detected and, surprisingly, fatty acids having ${\Delta}^5$-non-methylene interrupted conjugate double bond such as ${\Delta}^{5, 9}-C_{18:2},{\Delta}^{5, 9, 12}-C_{18:3}\;and\;{\Delta}^{5, 11, 14}-C_{20:3}$ occurred in appreciable amounts. In the lipids of P. koraiensis, the main component was $C_{18:2}{\omega}_6(45.0%)$, followed by $C_18:1{\omega} _9(26.9%)$ and ${\Delta}^{5, 9, 12}-C_{18:3}(14.6%)$, and then ${\Delta}^{5, 9}-C_{18:2}(2.2%)$ and ${\Delta}^{5, 11, 14}-C_{20:3}$ were also present. Levels of saturated fatty acid such as $C_{16:0}\;and\;C_{18:0}$ were as low as 7.5%. The seed oil of P. thunbergii predominantly comprised $C_{18:2}{\omega}_6(45.2%)$, and was then occupied by equal amounts ${\Delta}^{5, 9, 12}-C_{18:3}(18.1%)$ and $C_{18:1}{\omega}_9(18.1%)$. Its ${\Delta}^5, 11, 14}-C_{20:3}(5.8%)$ level was the highest in the samples tested. ${\Delta}^{5, 9}-C_{18:2}(2.8%)$ was also detected with other minor components. In the oils from the seeds of P. rigida, $C_{18:2}{\omega}_6$ was present as a main component, accompanied by $C_{18:1}{\omega}_9(21.6%)$ and ${\Delta}^{5, 9, 12}-C_{18:3}(20.3%)$. The latter showed higher level than in any other samples. A minor component corresponding to ${\Delta}^{5, 9, 12, 15}-C_{18:4}$(not confirmed by GC-Mass) occurred in P. thunbergii and P. rigida.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.319-324
• /
• 2015

Purpose: This study was designed to evaluate the changes of phoria and calculated AC/A ratio, and their recovery time points by watching 3D television (3D TV). Methods: 50 subjects (male 30, female 20) of 20s to 40s ages who can watch 3D, were measured phoria using a Howell phoria card at 3 m for distance and 40 cm for near. The phoria was evaluated before watching 3D TV and every 10 minutes from starting of watching 3D TV for 30 minutes, and every 5 minutes after finishing of watching 3D TV for 30 minutes again. Results: For the distance phoria during and after watching 3D TV, it was increased to more exophoria $-0.98{\pm}1.37{\Delta}$ (prism diopters) after 10 minutes from starting of 3D TV watching (p=0.063) and increased to more exophoria $-1.00{\pm}1.28{\Delta}$ after 30 minutes (p=0.024), and started to decrease after finishing of watching 3D TV and recovered to the level of before 3D TV watching ($-0.78{\pm}1.11{\Delta}$) after 20 minutes (p=0.32) with comparing to phoria of before watching 3D TV ($-0.80{\pm}1.12{\Delta}$). For the near phoria, it was also increased to more exophoria $-5.71{\pm}4.45{\Delta}$ after 10 minutes from starting of watching 3D TV (p=0.000) and $-6.58{\pm}4.36{\Delta}$ after 30 minutes (p=0.000), and started to decrease after finishing of watching 3D TV and recovered to the level of before watching 3D TV after 20 minutes ($-4.34{\pm}3.67{\Delta}$) (p=0.32) with comparing to the phoria of before watching 3D TV ($-4.36{\pm}3.66{\Delta}$). AC/A ratio was decreased from $4.92{\pm}1.17{\Delta}/D$ for before 3D TV watching to $4.11{\pm}1.50{\Delta}/D$ for after 30 minutes from starting of watching 3D TV (p=0.000), and increased after the end of watching 3D TV and recovered to the level of before 3D TV watching ($4.93{\pm}1.18{\Delta}/D$) after 25 minutes (p=0.598). Conclusions: During watching 3D TV at near, it showed a tendency of convergence insufficiency by decrease of calculated AC/A ratio as result that exophoria at near was higher increased than exophoria at distance. However, the increased exophoria at both near and distance was recovered to the level of base line after 25 minutes from the end of watching 3D TV. Through this study, it seems to need rational proposals of advice for watching 3D TV.

• The Korean Journal of Zoology
• /
• v.38 no.3
• /
• pp.340-347
• /
• 1995

We have used two kinds of P element constructs, Pc[(ry+)B] and p[(ry+)$\Delta$SX9], for genetic transformation by microinjection of D. melanogaster. Pc[(ry+)B] construct carrying the rosy gene within an autonomous P element was injected into a true M strain caring the ry506. mutation. The source of transposase for microinjection and transformation was provided by a P element helper plasmid designated p-$\Delta$2-3hs$\pi$, which was co-injected with nonautonomous P[(ry+)$\Delta$SX9] construct into same ry506 M strains. A dechorination method was adopted and 35 independent transformed lines were obtained froin 1143 G0 Injected (35/1143). About 20% of the injected embryos eclosed as adults. Among G0 eclosed flies, approximately 40% exhibited eye color that was similar to wild-type (ry+), but about 60% of fertile G0 transformed lines appeared to have no G1 transformants. Therefore it is unlikely that G0 expression requires integration of the rosy transposon into chromosomes. Pc[(ry+)B] and P[(ry+)$\Delta$SX9] constructs were found to be nearly same in the frequency of element-mediated transformation. On the basis of these results, nonautonomous P elements constructs could he used as same effective vectors in P element-mediated transformation for introducing and fixing genes in insect populations.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.457-466
• /
• 2003

This study aimed to evaluate the stability of steel frames with weak column-strong beam and consider P-effect using the experimental approach. Towards this end, three specimens were tested under monotonic loading condition. Parameters of tests includes the stiffness of the column and the axial load ratio. Result showed that reduction in column stiffness promoted P- effect, which considerably influenced the frame's stability.

• Journal of applied mathematics & informatics
• /
• v.29 no.3_4
• /
• pp.921-936
• /
• 2011

In this paper, our main purpose is to establish the existence of weak solutions of a weak solutions of a class of p-q-Laplacian system involving concave-convex nonlinearities: $$\{\array{-{\Delta}_pu-{\Delta}_qu={\lambda}V(x)|u|^{r-2}u+\frac{2{\alpha}}{\alpha+\beta}|u|^{\alpha-2}u|v|^{\beta},\;x{\in}{\Omega}\\-{\Delta}p^v-{\Delta}q^v={\theta}V(x)|v|^{r-2}v+\frac{2\beta}{\alpha+\beta}|u|^{\alpha}|v|^{\beta-2}v,\;x{\in}{\Omega}\\u=v=0,\;x{\in}{\partial}{\Omega}}$$ where ${\Omega}$ is a bounded domain in $R^N$, ${\lambda}$, ${\theta}$ > 0, and 1 < ${\alpha}$, ${\beta}$, ${\alpha}+{\beta}=p^*=\frac{N_p}{N_{-p}}$ is the critical Sobolev exponent, ${\Delta}_su=div(|{\nabla}u|^{s-2}{\nabla}u)$ is the s-Laplacian of u. when 1 < r < q < p < N, we prove that there exist infinitely many weak solutions. We also obtain some results for the case 1 < q < p < r < $p^*$. The existence results of solutions are obtained by variational methods.