• 지질공학
• /
• 제19권4호
• /
• pp.529-541
• /
• 2009

이 연구는 이천과 포천지역 일대에 분포하고 있는 온천에 대하여 화학성분, 산소 및 수소 동위원소, 그리고 헬륨과 아르곤 같은 영족기체의 동위원소 특성을 분석하여 온천별 지화학적 특성을 밝히고, 영족기체의 기원과 지하수의 지화학적 상관성을 해석하고자 하였다. 이를 위하여 연구지역에서 7점의 온천수와 가스성분을 채취하였고, 온천공 주변 지하수와 지표수 17개 시료를 채취하여 분석하였다. 연구지역 온천수는 환원성환경의 중성내지는 약알카리성의 pH 특성을 보이고, 전기전도도는 $310{\sim}735\;{\mu}S/cm$ 범위를 보여준다. 온천수의 수온은 $21.5{\sim}31.4^{\circ}C$ 범위로 저온형이며, 성분상 단순온천에 해당된다. 이천지역 온천수는 중성의 pH 조건과 주변지역 지하수와 유사한 $Ca-HCO_3$ 내지는 $Ca(Na)-HCO_3$ 수리화학적 유형을 보이는 반면, 포천지역 온천수는 알카리성의 pH 조건과 $Na-HCO_3$ 유형으로 지화학적으로 상당히 진화된 특성을 보인다. 이천온천수는 우라늄의 함량이 높고, 포천지역 온천수에는 불소의 함량이 높은 것이 특징이다. 온천수의 $\delta^{18}O$와 ${\delta}D$값은 각각 $-8.85{\sim}-10.1%o$과 $-60.8{\sim}-72.2%o$의 범위로 순환수기원을 보인다. 동위원소 조성을 보면 포천지역 온천수는 지하수에 비해 고지대 함양과 긴 유동경로를 거친 것으로 해석된다. 온천수내 영족기체 동위원소비 분석 결과 $^3He/^4He$ 동위원소비는 $0.094\;{\times}\;10^{-6}{\sim}0.653\;{\times}\;10^{-6}$ 범위를 보인다. 이천지역 온천수는 대기기원의 헬륨이 우세하지만 맨틀(마그마)와 같은 심부기원의 혼합율이 포천지역 온천수보다 높은 특성을 보인다. 포천지역 온천수는 지각기원의 헬륨 혼합율이 높다. 또한 온천수별 동일한 기원의 혼합선상에서도 천부지하수와 심부지하수의 혼합상태에 따라서 서로 다른 $^4He/^{20}Ne$ 비를 보인다. 온천수의 $^{40}Ar/^{36}Ar$ 비는 대기기원의 값과 유사한 범위를 보인다.

• 한국식품저장유통학회지
• /
• 제10권1호
• /
• pp.16-22
• /
• 2003

느타리버섯의 호흡속도 측정 및 MA 포장 저장 실험을 수행한 결과 호흡속도는 2$0^{\circ}C$에서 산소소비속도 28.9∼161.4mgO$_2$/kg$.$hr로 나타났으며 이산화탄소방출 속도는 53.4∼166.9mg$CO_2$/kg$.$hr로 나타났다. 산소소비속도와 이산화탄소발생속도를 반응표면분석한 결과를 이용하여 느타리버섯의 저장 가능 기체조성을 예측한 결과 2.5∼4.5% $O_2$와 11.5∼l3%$CO_2$로 나타났다. 포장내 기체조성은 0.03mmLDPE의 경우 $O_2$농도 1.6∼3.0%, $CO_2$농도 3.9∼5.3% 사이였으며 0.05mmLDPE에서는 $O_2$농도 1.2∼l.3%, $CO_2$농도 9.0∼11.1%사이였고 Ny+PE포장에서는 $O_2$농도 0.9∼l.2%, $CO_2$농도 33.5∼39.6% 사이로 나타났다. 중량감모율의 경우 0.03mmLDPE 포장이 가장 높게 나타났으며 Nylon+PE포장이 가장 낮게 나타났다. 갓과 자루의 경도는 저장기간에 따라 감소하였으며 갓의 경도는 저장온도에 영향을 받았으며 자루의 경도는 포장재질에 더욱 영향을 받는 것으로 나타났다. 색도의 변화는 저장 기간이 경과할수록 $\Delta$E값이 증가하는 것으로 나타났으며 12$^{\circ}C$와 2$0^{\circ}C$에서는 저장초기에 $\Delta$E값의 변화가 급속하게 일어나는 것으로 나타났다. 0.03mmLDPE 포장구가 중량 감모율이 높고 색도변화가 심하였고 Nylon+PE포장의 경우에는 자루의 경도저하와 이산화탄소의 과도한 축적으로 알콜냄새가 발생하였다. 0.05mmLDPE 포장구의 경우 예측된 환경기체조성에 가장 유사한 포장내 기체조성을 유지하였으며 중량감모, 경도, 색도 등 전반적인 저장 품질이 우수하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2413-2418
• /
• 2009

Rates of solvolyses of 4-nitrophenyl phenyl thiophosphorochloridate (4-N$O_2$PhOP(S)(Cl)OPh, $\underline{1}$) in ethanol, methanol, and aqueous binary mixtures incorporating ethanol, methanol, acetone, and 2,2,2-trifluroethanol (TFE) are reported. Thermodynamic parameters were determined at several temperatures in three representative solvents. The extended Grunwald-Winstein equation was applied to 29 solvents and the correlation coefficient (R) showed 0.959. The sensitivities (l = 1.37 and m = 0.62) are similar to those obtained for diphenyl thiophosphorochloridate (($PhO)_2$PSCl, $\underline{2}$), diphenyl phosphorochloridate (($PhO)_2$POCl, $\underline{3}$), diphenyl phosphinic chloride ($Ph_2$POCl, $\underline{4}$), and diphenyl thiophosphinic chloride ($Ph_2$PSCl, $\underline{5}$). The solvolytic reaction mechanism of 4-nitrophenyl phenyl thiophosphorochloridate ($\underline{1}$) is suggested to be proceeded a $S_N$2 process as previously reported result. The activation enthalpies are shown as slightly low as ${\Delta}H^{\neq}\;=\;9.62\;to\;11.9\;kcal{\cdot}mol^{-1}$ and the activation entropies are shown as slightly high negative value as ${\Delta}S^{\neq}\;=\;-34.1\;to\;-44.9\;cal{\cdot}mol^{-1}{\cdot}K^{-1}$ compared to the expected $S_N$2 reaction mechanism. Kinetic solvent isotope effects are accord with a typical $S_N$2 mechanism as shown in the range of 2.41 in MeOH/ MeOD and 2.57 in $H_2O/D_2O$ solvent mixtures.

• 대한치과의사협회지
• /
• 제49권4호
• /
• pp.203-210
• /
• 2011

The aims of this study were to evaluate the adequate thickness of opaque resins for situations such as an oral black cavity and discolored tooth structure, as well as the translucency of each opaque material at various thicknesses. Six opaque-shade composite resins (Z-350 OA3, Amelogen Universal A2O, Esthet-X A2O, Esthet-X A4O, Charmfil UO and Aelite Universal OA3) were prepared in metal molds with a hole of 8 mm in diameter and various thicknesses (0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0 mm and 4.0mm). Four backgrounds (white tile, black tile, C4 shade porcelain and opaque resin itself) were used to determine the translucency parameter (between black and white backgrounds). and to mimic a black oral cavity (between black and opaque resin backgrounds) and a discolored tooth structure (between C4 and opaque resin backgrounds). Color measurements were made by a colorimeter to determine the CIELAB values of each specimen with each background and to calculate the translucency parameter and ${\Delta}E^*$ value difference among the specimens on the backgrounds. The translucency parameter and ${\Delta}E^*$ obtained between black and opaque resin backgrounds decreased in similar pattern as thickness increased. A C4 background was masked by resin thicknesses of 0.5-1.0mm, while a black background required thicknesses of 1.0-2.0mm. Adequate knowledge about differences in the optical character like translucency of the materials used is essential, together with the accumulated experience of the individual clinician.

• 한국산업융합학회 논문집
• /
• 제8권3호
• /
• pp.155-160
• /
• 2005

Kinetic studies were carried out for aquation of carbonatobis(ethylenediamine)cobalt(III) complexes in [H+] aqueous solution by UV/VIS-spectrophotometry. The rate law that in deduced from rate data is $rate=k_H{^+}[H^+]^{1.4}$ {$[Co(en)_2(CO_3)]^+$}1.0 where $k_H{^+}$ is the rate constant considering acidic catalyst, $H^+$ ion whose value is $0.241l{\cdot}mol^{-1}{\cdot}sec^{-1}$. The values of activation parameters Ea, ${\Delta}H^{\ast}$ and ${\Delta}S^{\ast}$ were $15.33Kcal{\cdot}mol^{-1}$, $14.52Kcal{\cdot}mol^{-1}$ and -57.49 e.u. respectively. On the basis of kinetic data and the observed activation parameters, we have proposed the mechanism that proceeds with two step protonations. The rate equation derived from the proposed mechanism has been in agreement with the observed rate equation. It has been seen that our modified mechanism for Harris's proton freequilibrium one prefer to the his concerted mechanism, and more the last product substitute $H_2O$ for $OH^-$ the Harris's mechanism in the acidity range 2 < pH < 5.

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권4호
• /
• pp.22-25
• /
• 2011

A single-coat $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) film of high critical currents ($I_c$) could be successfully fabricated by optimizing the viscosity of the coating solution in the metal-organic deposition (MOD) process. From a Ba-deficient coating solution (Y: Ba: Cu = 1: 1.5: 3) having the viscosity of 212 $mPa{\cdot}sec$, 0.9 ${\mu}m$-thick single coat YBCO film with the $I_c$ value of 289 A/cm-width ($J_c$ = 3.2 MA/$cm^2$) at 77 K was achievable on the $SrTiO_3$ (STO) substrate, which was superior to that of our previous report for 0.8 ${\mu}m$-thick single coat YBCO film from a stoichiometric coating solution (Y: Ba: Cu = 1: 2: 3) on the $LaAlO_3$ (LAO) substrate. This result might be attributed to denser and more homogeneous microstrcuture in the case of the YBCO film from the Ba-deficient coating solution.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.485-492
• /
• 2000

The sintering characteristics and the effects of density on dielectric properties in 0.2Ba(Mg$_{1}$3(Nb$_{2}$3/)O$_3$-0.8Ba(Mg$_{1}$3//Ta$_{2}$3/)O$_3$ceramics were investigated. The samples were made by the powder mixing techniques with the two step calcining conditions. When the 1st and the 2nd calcining temperatures were 120$0^{\circ}C$ and the sintering temperature was 155$0^{\circ}C$the density of samples showed the highest value (7.45 g/cm$^3$, 98.5% of theoretical density) among them. The dielectric constant of samples was nearly independent of density but the tan $\delta$ and the temperature coefficient of dielectric constant decreased linearly with increasing of the density. The quality factor(Q$\times$f), the temperature coefficient of resonance frequency and the dielectric constant of Ba[Mg$_{1}$3(Nb$_{0.2}$/Ta$_{0.8}$)sub 2/3/]O$_3$ceramic were 79,548 GHz, +1.5 ppm/$^{\circ}C$ and 26 in the microwave range, respectively.ely.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.265-270
• /
• 2014

Among the Ruddlesden-Popper series, $La_4Ni_3O_{10}$ has received widespread attention as a promising cathode material by reason of its favorable properties for realizing high performance of intermediate temperature solid oxide fuel cells (IT-SOFCs). The $La_4Ni_3O_{10}$ cathode is prepared using the facile sol-gel method by employing tri-blockcopolymer (F127) to obtain a single phase in a short sintering time. There are no reactions between the $La_4Ni_3O_{10}$ cathode and the $Ce_{0.9}Gd_{0.1}O_{2-\delta}$ (GDC) electrolyte upon sintering at $1000^{\circ}C$, indicating that the $La_4Ni_3O_{10}$ cathode has good chemical compatibility with the GDC electrolyte. The maximum electrical conductivity of $La_4Ni_3O_{10}$ reaches approximately 240 S $cm^{-1}$ at $100^{\circ}C$ and gradually decreases with increasing temperaturein air atmosphere. The area specific resistance value of $La_4Ni_3O_{10}$ composite with 40 wt% GDC is $0.435{\Omega}cm^2$ at $700^{\circ}C$. These data allow us to propose that the $La_4Ni_3O_{10}$-GDC composite cathode is a good candidate for IT-SOFC applications.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.194-199
• /
• 2002

Many oxidative metabolites of tetrahydrocannabinols (THCs), active components of marijuana, were pharmacologically active, and 11-hydroxy-THCs, 11-oxo-${\Delta}^8$-THC, 7-oxo-${\Delta}^8$-THC, 8$\beta$, 9$\beta$-epoxyhexahydrocannabinol (EHHC), 9$\alpha$, l0$\alpha$-EHHC and 3'-hydroxy-${\Delta}^9$-THC were more active than THC in pharmacological effects such as catalepsy, hypothermia and barbiturate synergism in mice. Cannabidiol (CBD), another major component, was biotransfomred to two novel metabolites, 6-hydroxymethyl-${\Delta}^9$-THC and 3-pentyl-6, 7, 7a, 8, 9, lla-hexahydro-I, 7-dihydroxy-7, 1O-dimethyldibenzo[b, d]oxepin (PHDO) through 8R, 9-epoxy-CBD and 85, 9-epoxy-CBD, respectively. Both metabolites exhibited some pharmacological effects comparable to d9 - THe. Cannabinol (CBN), the other major component, was mainly metabolized to ll-hydroxy-CBN by hepatic microsomes of animals including humans. The pharmacological effects of the metabolite were higher than those of CBN demonstrating that II-hydroxylation of CBN is metabolic activation pathway of the cannabinoid as is the case in THCs. Tolerance and reciprocal cross-tolerance developed to pharmacological effects d8 - THC and ll-hydroxy-d8-THC , and the magnitude of tolerance development produced by the metabolite was significantly higher than that by d8-THC. The results indicate that ll-hydroxy-d8-THC has an important role not only in the pharmacological effects but also its tolerance development of d8 - THe. THCs and their metabolites competed to the specific binding of CP-55, 940, an agonist of cannabinoid receptor, to synaptic membrane from bovine cerebral cortex. The Ki value of THCs and their metabolites were closely paralleled to their pharmacological effects in mice. A novel cytochrome P450 (cyp2c29) was purified and identified as a major enzyme responsible for the metabolic activation of d8-THC at the II-position in the mouse liver. cDNA of CYP2C29 was cloned from a mouse cDNA library and its sequence was determined. The oxidation mechanism of THC by cyp2c29 was proposed.

• 치위생과학회지
• /
• 제12권6호
• /
• pp.660-665
• /
• 2012

본 연구는 회전법과 변형 스틸맨법간의 치면세균막 감소효과를 비교하기 위하여 천안 소재 대학교 31명의 대학생을 대상으로 무작위 배정한 순수실험을 설계하여 치면세균막 관리프로그램을 시행한 결과 다음과 같은 결과를 얻었다. 1. 중재 전후에 따른 각 잇솔질의 치면세균막 관리를 비교한 결과 중재 전에 측정한 SPS Score와 ${\Delta}R30$에서 두 잇솔질 방법간의 차이는 나타났으나(p<0.05), 나머지 측정값들과 중재 후의 측정값에서 유의한 관련성을 보이지 않았다(p>0.05). 2. 각 잇솔질 방법에 따른 중재 전 후의 치면세균막 관리를 비교한 결과 PCR, QLF-PCR, ${\Delta}R30$, ${\Delta}R60$에서 회전법과 변형 스틸맨법 집단은 통계적으로 유의한 차이가 있었다(p<0.05). 또한, 회전법보다 변형 스틸맨법 집단에서 치면세균막 지수는 더 큰 감소를 보였고, 잇솔질 교육 중재를 실행한 후 치면세균막 지수가 감소하는 것으로 나타났다. 3. PCR과 QLFD 촬영 측정값의 관계에서 PCR과 육안검사 QLF-PCR의 관계, SPS Score와 그 하위 척도 ${\Delta}R$값들의 상관관계는 보였으나, PCR와 QLF값의 상관관계는 보이지 않았다. 이상의 결과를 종합해보면, 회전법과 변형스틸맨법의 치면세균막 관리 효과는 통계적으로 유의하지 않았으나, 회전법보다 변형 스틸맨법 집단에서 치면세균막 감소차이는 더 큰 것으로 확인되었고, 잇솔질 교육을 실행함으로써 치면세균막 지수가 감소하는 것으로 나타났다.