• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.149-158
• /
• 2006

A review has been made on what kind of method can be applied to predict the dynamic derivatives of the separated PLF(Payload Fairing) halves of a launch vehicle in consideration of technology and budget. An optimal approach is selected considering the geometric characteristics of the PLF halves, the aerodynamic conditions and the required accuracy. The time history of aerodynamic force/moment coefficients are obtained for the forced harmonic motions by solving the unsteady Euler equations derived with respect to the inertial reference frame. and the dynamic derivatives are deduced by integration of the aerodynamic coefficients for one period. In this research, the dynamic derivatives are presented for 0.6$\leq$ M $\leq$2.0, $-180^{\circ}$ $\leq$$\alpha$ $\leq$$180^{\circ}$ and $-90 ^{\circ}$$\leq$$\beta$$\leq$$90 ^{\circ}$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.3
• /
• pp.270-277
• /
• 1994

This study was conducted to investigate change of seed dormancy during storage in rice. The result of germination rate observed at different storage duration after harvest indicated that two Japonica rice varieties, Sangpungbyeo and Hwaseongbyeo, tow sare type local varieties, Jakwangdo and Mongeunsare, and a Tongil type rice, Samgangbyeo, showed no dormancy in rice seed harvested at 40 days after heading, However, weak dormancy was found in matured rice seed of Sobaekbyeo and Odaebyeo, and strong seed dormancy was found in Jungwonbyeo, IR-20 and IR-42. Rice seed stored for 30 days after harvest at 2$0^{\circ}C$ constant temperature or 25/15$^{\circ}C$ of day /night temperature fluctuation showed higher germination rate above 90% in all varieties tested. But germination rate of seeds stored at 4$^{\circ}C$ for 30 to 180 days showed varietal difference, higher in rice varieties having weak seed dormancy and lower in strong dormancy varieties. Days to 80% germination and average days for germination were shortened by storage for 30 to 180 days after harvest at 2$0^{\circ}C$, 4$^{\circ}C$ with RH 40% or day /night 25/15$^{\circ}C$ temperature condition in all rice varieties tested, but the degree of acceleration was lower at the condition of 4$^{\circ}C$ with RH 40%.

• Korean journal of food and cookery science
• /
• v.22 no.5 s.95
• /
• pp.642-649
• /
• 2006

The browning of soy sauce is caused by the reaction of amino-carbonyl between amino-compounds and reducing sugar. Only a few studies have investigated the formation of melanoidins in UHYUKJANG. The objectives of this study were to analyze the brown pigment of UHYUKJANG and to investigate the characteristics of UHYUKJANG in comparison with soy sauce and model melanoidins. The samples were ripened for 0, 60, 120, 180, 240, 300 and 360 days at 4$^{\circ}C$ and 20$^{\circ}C$. The pH, absorbance at 420 nm absorbance ratio of 400 to 500 nm and UV-VIS spectra as an index of color intensity were measured. Additionally, L, a and b values of the samples and the amount of 3-Deoxyglucosone(3DG) in the samples were measured. The pH of both soy sauce (from 6.26 to 5.52) and UHYUKJANG (from 6.13 to 5.11) rapidly decreased during the first 60 days of aging and was also affected by storage temperature. The absorbance of samples at 420 nm increased during the aging process, reaching its maximum after 180 days, regardless of sample and temperature. On the other hand, the intensity of brown color in the samples increased with increasing aging period according to the results of absorbance ratio (soy sauce: 1.37 to 5.29, UHYUKJANG: 1.37 to 5.02). The L value of soy sauce increased during the aging process and was maximized after 240 days at 4$^{\circ}C$ and 180 days at 20$^{\circ}C$, but decreased thereafter. There was no significant difference in L value of UHYUKJANG, regardless of aging period and temperature. On the other hand, the b value did not reveal any significant change during aging, but the a value increased until 120 days of aging in the other samples except for UHYUKJANG at 20$^{\circ}C$. The average amount of 3DG separated from soy sauce was 5.65 mg%, and from UHYUKJANG was 3.74 mg%. These results indicated that the browning of UHYUKJANG was also caused by melanoidins produced by the reaction of amino-carbonyl during the fermentation process.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.1
• /
• pp.26-35
• /
• 2012

Until now, study on the hydraulic resistance characteristics of the ground at the river and the ocean current has been focused on the behavior under uni-directional flow without the direction change of flow. However, recent research result shows that scour rate which were measured under the bi-directional flow was much higher than those measured under uni-directional flow for both fine grained and coarse soil. Since the direction of inflow and return flow at the shore, where the structure will be constructed, is not always $180^{\circ}$, effect of the incidence angle on the hydraulic resistance capacity of the ground should be examined. Using the improved EFA which can consider the direction change of flow, hydraulic resistance capacities of the artificially composed clayey fine grained soil and clayey sandy soil under $0^{\circ}$, $90^{\circ}$, $135^{\circ}$, $180^{\circ}$ flow angle of incidence were assessed. Test result shows that hydraulic resistance capacity decreases and scour rate increase with the increase of the incidence angle between inflow and return flow. For the low consolidation pressure condition, hydraulic resistance capacity of the fine grained soil decreases rapidly. While the hydraulic resistance capacity of the coarse grained soil decreases more rapidly than fine grained soil under high consolidation pressure. Eventually since the larger the incidence angle between inflow and return flow, the larger the scour rate. Hydraulic resistance capacity under bi-directional flow($0^{\circ}{\longleftrightarrow}180^{\circ}$) should be examined for the design purpose.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.412-417
• /
• 1998

This paper provides accurate flexural vibration solutions for thick (Mindlin) sectorial plates. A Ritz method is employed which incorporates a complete set of admissible algebraic-trigonometric polynomials in conjunction with an admissible set of Mindlin “corner functions". These corner functions model the singular vibratory moments and shear forces, which simultaneously exist at the vertex of corner angle exceeding 180$^{\circ}$. The first set guarantees convergence to the exact frequencies as sufficient terms are taken. The second set represents the corner singularities, and accelerates convergence substantially. Numerical results are obtained for completely free sectorial plates. Accurate frequencies are presented for a wide spectrum of vertex angles (90$^{\circ}$, 180$^{\circ}$, 270$^{\circ}$, 300$^{\circ}$, 330$^{\circ}$, 350$^{\circ}$, 35 5$^{\circ}$,and 359$^{\circ}$)and thickness ratios.tios.

• The Korean Journal of Ceramics
• /
• v.7 no.1
• /
• pp.30-35
• /
• 2001

The contribution of the non-$180^{\circ}C$ domains to the electric-field-induced strains (EFI-strains) of PZT ceramics was evaluated by an XRD method and by an interferometric method. The XRD intensity ratio of 200 and 002 diffraction peaks of tetragonal PZT was measured under strong electric fields. The amount of the $90^{\circ}$ domain reorientation was evaluated and the strain due to the domain reorientation was calculated. It was confirmed that the EFI-strain of PZT ceramics was equal to the sum of the strain calculated from the d$_33$ constant determined by the resonance-antiresonance method and the strain due to the $90^{\circ}$ domain reorientation. The amount of the $90^{\circ}$domain reorientation has a linear relation with the c/a ratio in the "soft" PZT ceramics. A Mech-Zehnder interferometer was constructed to measure the EFI-strains vs. electric-field curves of PZT ceramics as a function of frequency. The EFI-strain vs. electric-field curve showed a hysteresis due to the effect of the non-$180^{\circ}$ domain reorientation when the applied voltage was high and its frequency was low. The apparent piezoelectric constant increased from the d$_33$ value determined by the resonance-antiresonance method with decreasing frequency. This deviation was attributed to the non-$180^{\circ}$ domain contribution.tribution.

• Korean Journal of Cognitive Science
• /
• v.23 no.3
• /
• pp.409-424
• /
• 2012

The purpose of the present study was to examine if perception of visual coordination pattern is consistent with the prediction of the HKB model (Haken, Kelso, Bunz, 1985). In addition, this study aimed to see if an additional sensory information using a grid background stabilizes perception of coordination pattern. Participants joined one of two experimental groups, Normal background and Grid background, to participate the pattern recognition training session and the pattern judgment test session. Participants observed $0^{\circ}$, $18^{\circ}$, $36^{\circ}$, $54^{\circ}$, $72^{\circ}$, $90^{\circ}$, $108^{\circ}$, $126^{\circ}$, $144^{\circ}$, $162^{\circ}$, and $180^{\circ}$ coordination patterns characterized by two oscillating dots. The dots oscillated in 0.25 Hz for the pattern recognition training and in 0.5 Hz, 1 Hz, and 2 Hz for the pattern judgment test. Judgment score, absolute judgment error, and judgment stability out of the pattern judgment test were analyzed statistically. The landscape of pattern accuracy and stability data was "inverted-U" shape with slower oscillating frequency conditions. In the faster condition, the accuracy and stability of the judgment decreased with relative phase patterns near $180^{\circ}$. These findings consistent with the prediction of the HKB model. The grid as additional sensory information did not increase accuracy and stability in coordination perception.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.31-37
• /
• 1998

Magnitude/phase controlling circuit which is composed of attenuator and phase shifter make phase/gain cross-coupling, so too much tuning time is needed to find optimum operation point. In this paper, vector attenuator which control magnitude and phase of input signals is proposed. Vector attenuator in past ignores phase variation characteristics of attenuator, but vector attenuator of this paper compensates phase variation characteristics of attenuator. This vector attenuator consists of 0$^{\circ}$/180$^{\circ}$ phase shifter and low phase shifting attenuator and so forth. A 0$^{\circ}$/180$^{\circ}$ phase shifter has 0$^{\circ}$/179.9$^{\circ}$ phase shifting characteristics at a center frequency 881 MHz and a low phase shifting attenuator has an attenuation of 25dB, within the limit of 3.6$^{\circ}$ phase shift and less than -20dB reflection characteristics at both input and output ports. The designed vector attenuator shows that cartesian coordinate plane of output signal space can be represented correctly.

• Journal of Magnetics
• /
• v.3 no.2
• /
• pp.44-48
• /
• 1998

Scanning Electron Microscopy with Polarization Analysis (SEMPA) was used to image the surface magnetic domain structure of the 100 ${\mu}{\textrm}{m}$ thick 3% Si-Fe sheet. The thin-gauged 3% Si-Fe strips with magnetic induction ($B_{10}$) from 1.98 to 1.57 Tesla were prepared via conventional metallurgical processes including melting, hot-and cold-rolling, intermediate annealing and final annealing. Using SEMPA, it was observed that the $B_{10}$ (1.98 T) Tesla sample was almost composed of 180$^{\circ}$ stripe domains which are parallel to rolling direction. On the other hand the 3% Si-Fe sheet with $B_{10}$ (1.57 T) Tesla was composed of large 180$^{\circ}$stripe domains that are slanted about 30$^{\circ}$to the rolling direction and complex magnetic domain structures like tree and zigzag pattern. The 180$^{\circ}$stripe domains, which covered a major part of the sample, had (110)<001> Goss texture parallel to the rolling direction. The domain walls between 180$^{\circ}$stripe domains were the conventional Bloch type walls. On the other hand, the 90$^{\circ}$domains, which covered minor part on edge of the sample, were observed in (200) grains. The domain walls between 90$^{\circ}$domains were the Neel type walls. In high magnification, the elliptical singularity at the Neel walls was clearly observed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.237-248
• /
• 1988

To access the appropriate height of sleeve cap which is required for the basic sleeve pattern according to arm movements, plaster gypsum experiment was performed. Arm movements were 5types ($0^{\circ},\;45^{\circ},\;90^{\circ},\;135^{\circ},\;180^{\circ}$) to the vertical directions in the front. The appropriateness of the pattern was analyzed by measuring clothing pressure. The results obtained were as follows: 1. Increasing the movement angle, sleeve width increased but height of sleeve cap and armhole girth decreased. 2. Increasing the movement angle, the acromion moved to the front part of bodice. 3. On the basis of the result of the height of sleeve cap, the $\frac{AH}{4} +2.5cm$ sleeve basic 4 pattern is suitable for the direction $M_1(0^{\circ}),\;M_2(45^{\circ})$, and the $\frac{AH}{5}$sleeve basic pattern is suitable for the direction $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$. 4. As the movement angle and height of sleevecap increased, the part which receive high pressure increased and the difference between the hightest and the lowest clothing pressure increased. 5. By the variation of movement angle and height of sleevecap, clothing pressure of upperarm was affected more than that of shoulder blade. 6. The clothing pressure of upperarm and shoulder blades were more affected by the height of sleeve cap than the ease of breast area. 7. Considering the clothing pressure of various arm movement, the most appropriate height of sleeve cap for $M_1(0^{\circ}),\;M_2(45^{\circ})$ positions was to use the $\frac{AH}{4}$+2.5cm, and for $M_3(90^{\circ}),\;M_4(135^{\circ})$, and $M_5(180^{\circ})$, was $\frac{AH}{5}$.