• Journal of the Korean Magnetic Resonance Society
• /
• v.21 no.2
• /
• pp.67-71
• /
• 2017

At high temperature, the roles of $NH_4$ and $H_2O$ in $(NH_4)_2Fe(SO_4)_2{\cdot}6H_2O$ and $(NH_4)_2Zn(SO_4)_2{\cdot}6H_2O$ single crystals were investigated using a pulse NMR spectrometer. Temperature was shown to have a significant influence, causing changes in the deformation of $NH_4$ and $H_2O$. From the $^1H$ NMR and $^{14}N$ NMR spectrum, the forms of environment surrounding $^{14}N$ in $NH_4$ groups is more important than the loss of $H_2O$ groups. NMR studies indicate that $NH_4{^+}$ ions in Tutton salts play an important role in the changes of the crystal structure at high temperatures.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.75-82
• /
• 1996

Acrylic acid was graft-copolymerized on polyethylene film in the presence of additives such as acid and $FeSO_4(NH_4)_2SO_4{\cdot}6H_2O$ using peroxide grafting technique by ${\gamma}$-ray and electron beam, and the effect of $FeSO_4(NH_4)_2SO_4{\cdot}6H_2O$ and acid on the grafting yield was evaluated. The grafting mechanism and the physical property of grafted films were also examined. The results showed that the inclusion of $FeSO_4(NH_4)_2SO_4{\cdot}6H_2O$ in acidified acrylic acid grafting solution was extremely beneficial and led to a most unusual enhancement effect in the radiation grafting. In the other hand, inclusion of mineral acid in the grafting solution in the absence of $FeSO_4(NH_4)_2SO_4{\cdot}6H_2O$ could not lead to he suitable grafting reaction by the severe homopolymerization of acrylic acid. The addition of $H_2SO_4$, and HCl led to much higher grafting yield than $HNO_3$and $CH_3COOH$. It was shown that grafting yield of ${\gamma}$-ray irradiated-polyethylene was higher than that of electron beam irradiated polyethylene.

• Journal of Korean Society of Forest Science
• /
• v.14 no.1
• /
• pp.21-31
• /
• 1972

It has intended to identify the members of the Genus Lespedeza in Korea by a chemical colour reaction, and the following five species of the Genus Lespedeza grown in the garden have been used in this experiment. 1. Lespedeza bicolor Turcz 2. Lespedeza bicolor var. melanantha (Nak.) T. Lee 3. Lespedeza cyrtobotrya Miq. 4. Lespedeza japonica var. intermedia Nakai 5. Lespedeza maritima Nakai 6. Lespedeza maximowiczii Schneider 7. Lespedeza maximowiczii var. tomentella Nakai A few drops of each solution of $K_2Cr_2O_7$. $FeSO_4{\cdot}7H_2O$, $FeCl_3$, $KH_2PO_4$, $KMnO_4$, $NH_4OH$, and HCl was added to the methanol extracts of wood dust to get the specific colour reaction. HCl-infused wood was also used for the identification of L. bicolor var. melanantha and L. bicolor. The results can be summarized as the following key; 1. Chrome lemon by $K_2Cr_2O_7$ ${\cdots}{\cdots}$2 1. Sun flower yellow by $K_2Cr_2O_7$ ${\cdots}{\cdots}$Lespedeza maximowiczii var. tomentella Nakai 2. $KH_2PO_4$ Oystem white by $KH_2PO_4$; golden yellow by $FeCl_3$ ${\cdots}{\cdots}$=3 2. Cream colour by $KH_2PO_4$=6 3. Oyster white by $NH_4OH$; corn colour by $FeSO_4{\cdot}7H_2O$ ${\cdots}{\cdots}$4 3. Cream colcur by $NH_4OH$ ${\cdots}{\cdots}$5 4. Van dyke brown by $KMnO_4$ ${\cdots}{\cdots}$; sea shell pink by HCl injection under heating ${\cdots}{\cdots}$Lespedeza japonica var. intermedia Nakai 4. Sepia colour by $KMnO_4$; honey colour by HCl injection under heating ${\cdots}{\cdots}$Lespedeza maritima Nakai 5. Golden red by $FeSO_4{\cdot}7H_2O$; andover green by HCl-infused wood dust ${\cdots}{\cdots}$Lespedeza bicolor var. melanantha (Nak.) T. Lee 5. Yellow ochre by $FeSO_4{\cdot}7H_2O$; sand warm gray by HCl-infused wood dust ${\cdots}{\cdots}$Lespedeza bicolor Turcz 6. Amber green by $FeCl_3$ ${\cdots}{\cdots}$Lespedeza cyrtobotrya Miq. 6. Leather brown by $FeCl_3$ ${\cdots}{\cdots}$Lespedeza maximowiczii Schneider.

• KSBB Journal
• /
• v.5 no.4
• /
• pp.355-363
• /
• 1990

Methanol-utilizing bacterium isolated from sewage samples in Seoul showed optimal temperature and pH of $33^{\circ}C$ and 7.1 for growth, respectively. The maximum specific growth rate was $0.42hr^{-1}$. The minimum medium composition was reconstituted depending on the surplus and the deficit of each component in the basal medium at steady state. The optimal composition was given as(g/l); Methanol 40, $(NH_4)_2\;SO_42, \;KH_2PO_4\;1.5, \;K_2HPO_4\;0.2, \;H_3PO_4\;0.79, \;Na_2HPO_4{\cdot}12H_2O\;0.15, \;MgSO_4{\cdot}7H_2O\;1.5, \;FeSO_4{\cdot}7H_2O\;0.034, \;MnSO_4{\cdot}4H_2O\;0.005, \;CuSO_4{\cdot}5H_2O\;0.0027, \;CaCl_2{\cdot}2H_2O\;0.25, \;ZnSO_4{\cdot}7H_2O\;0.007, \;(NH_4)_6\;Mo_7O_{24}{\cdot}4H_2O\;0.00048, \;H_3BO_3\;0.00068, \;CoCl_2\; 0.00024$ Under the continuous culture with optimum medium the maximum cell productivity was 3.8g/1/hr at dilution rate $0.23hr^{-1}$. Maximum cell concentration and its protein content were 19.5g/l and 70% at dilution rate of $0.1hr^{-1}$, respectively.

• Journal of Animal Science and Technology
• /
• v.51 no.2
• /
• pp.171-176
• /
• 2009

A bacterial strain producing intracellular phytase was isolated from cultivable soil near cowsheds and identified as a fluorescent Pseudomonas sp. BUN1. The BUN1 phytase, partially purified by cation and anion exchange chromatography, exhibited its optimal activity at $40^{\circ}C$ and pH 5.5. As for substrate specificity, it was very specific for phytate and showed little activity on other phosphorylated conjugates. Its activity was greatly inhibited by metal ions such as $Cu^{2+}$, $Cd^{2+}$, and $Zn^{2+}$. Addition of corn starch to PSM (phytasesynthetic medium) [0.5% sodium phytate, 0.5% $(NH_4)_2SO_4$, 0.5% KCl, 0.01% $MgSO_4\cdot7H_2O$, 0.01% $CaCl_2\cdot2H_2O$, 0.01% NaCl, 0.001% $FeSO_4\cdot7H_2O$, 0.001% $MnSO_4\cdot4H_2O$; pH 6.5] for the phytase production significantly induced its enzyme activity in comparison with other carbon sources tested.

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.219-226
• /
• 2013

Activated magnetite ($Fe_3O_{4-{\delta}}$) has the capability of decomposing $CO_2$ proportional to the ${\delta}$-value at comparatively low temperature of $300^{\circ}C$. To enhance the $CO_2$ decomposition capability of $Fe_3O_{4-{\delta}}$, $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$ and $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$ were synthesized and then reacted with $CO_2$. $Fe_{1-x}Co_xC_2O_4{\cdot}2H_2O$ powders having Fe to Co mixing ratios of 9:1, 8:2, 7:3, 6:4, and 5:5 were synthesized by co-precipitation of $FeSO_4{\cdot}7H_2O$ and $CoSO_4{\cdot}7H_2O$ solutions with a $(NH_4)_2C_2O_4{\cdot}H_2O$ solution. The same method was used to synthesize $Fe_{1-x}Mn_xC_2O_4{\cdot}2H_2O$ powders having Fe to Mn mixing ratios of 9:1, 8:2, 7:3, 6:4, 5:5 with a $MnSO_4{\cdot}4H_2O$ solution. The thermal decomposition of synthesized $Fe_{1-x}Co_xC_2O_4{\cdot}2H_2O$ and $Fe_{1-x}Mn_xC_2O_4{\cdot}2H_2O$ was analyzed in an Ar atmosphere with TG/DTA. The synthesized powders were heat-treated for 3 hours in an Ar atmosphere at $450^{\circ}C$ to produce activated powders of $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$ and $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$. The activated powders were reacted with a mixed gas (Ar : 85 %, $CO_2$ : 15 %) at $300^{\circ}C$ for 12 hours. The exhaust gas was analyzed for $CO_2$ with a $CO_2$ gas analyzer. The decomposition of $CO_2$ was estimated by measuring $CO_2$ content in the exhaust gas after the reaction with $CO_2$. For $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$, the amount of $Mn^{2+}$ oxidized to $Mn^{3+}$ increased as x increased. The ${\delta}$ value and $CO_2$ decomposition efficiency decreased as x increased. When the ${\delta}$ value was below 0.641, $CO_2$ was not decomposed. For $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$, the ${\delta}$ value and $CO_2$ decomposition efficiency increased as x increased. At a ${\delta}$ value of 0.857, an active state was maintained even after 12 hours of reaction and the amount of decomposed $CO_2$ was $52.844cm^3$ per 1 g of $(Fe_{0.5}Co_{0.5})_3O_{4-{\delta}}$.

• Applied Biological Chemistry
• /
• v.30 no.1
• /
• pp.77-87
• /
• 1987

The mutant with high productivity, X. malvacearum SNUF 560-6, was acquired from the X. malvacearum SNUF 560 with low productivity by UV-light irradiation. It was preserved is lyophilized stock culture and it was transferred to PDA slant to maintain viability fortnightly. Fermentations were started by retransfering to MY agar slant from PDA stok culture. The experiments for optimal xanthan gum production were studied in a chemically defined medium. Of the carbon and nitrogen sources tested, 0.4% sucrose medium and 10mM glutamic acid medium yielded the highest xanthan gun production respectively. The addition of 10g/l succinic acid stimulated xanthan gum production. Also 65mM $PO_4\;^{-3}\;(12.6g/l\;KH_2PO_4)$ was effective on xanthan gum production. Finally, medium 1 and medium 2 which have high xanthan gum production potencies were achieved in this stud. The components of medium 1 and medium 2 were as follows: Medium 1 : sucrose 40g/l glutamate 10mM $PO_4\;^{-3}\;54mM\;(KH_2PO_4\;12.65g/l)$ Citrate 2g/l $MgSO_4{\cdot}7H_2O\;0.2g/l$ $H_3BO_3\;0.005/l$ ZnO 0.006/l $FeCl_2{\cdot}6H_2O\;0.0024g/l$ $CaCO_3\;0.02g/l$ Medium 2 : $Sucrose\;40g/l\;(NH_4)_2SO_4\;2g/l$ $PO_4\;^{-3}\;65mM\;(KH_2PO_4\;12.65g/l)$ Succinate 10g/l $MgSO_4{\cdot}7H_2O\;0.02g/l$ $H_3BO_3\;0.06g/l$ ZnO 0.006g/l $FeCl_2{\cdot}6H_2O\;0.0024g/l$ $CaCO_3\;0.02g/l$.

• Korean Journal of Materials Research
• /
• v.23 no.11
• /
• pp.661-665
• /
• 2013

We investigated the characteristics of electroless plated Cu films on screen printed Ag/Anodized Al substrate. Cu plating was attempted using neutral electroless plating processes to minimize damage of the anodized Al substrate; this method used sodium hypophosphite instead of formaldehyde as a reducing agent. The basic electroless solution consisted of $CuSO_4{\cdot}5H_2O$ as the main metal source, $NaH_2PO_2{\cdot}H_2O$ as the reducing agent, $C_6H_5Na_3O_7{\cdot}2H_2O$ and $NH_4Cl$ as the complex agents, and $NiSO_4{\cdot}6H_2O$ as the catalyser for the oxidation of the reducing agent, dissolved in deionized water. The pH of the Cu plating solutions was adjusted using $NH_4OH$. According to the variation of pH in the range of 6.5~8, the electroless plated Cu films were coated on screen printed Ag pattern/anodized Al/Al at $70^{\circ}C$. We investigated the surface morphology change of the Cu films using FE-SEM (Field Emission Scanning Electron Microscopy). The chemical composition of the Cu film was determined using XPS (X-ray Photoelectron Spectroscopy). The crystal structures of the Cu films were investigated using XRD (X-ray Diffraction). Using electroless plating at pH 7, the structures of the plated Cu-rich films were typical fcc-Cu; however, a slight Ni component was co-deposited. Finally, we found that the formation of Cu film plated selectively on PCB without any lithography is possible using a neutral electroless plating process.

• Korean Journal of Poultry Science
• /
• v.31 no.4
• /
• pp.221-228
• /
• 2004

This study was conducted to determine the effects of two chemical additives on nitrogen (N) and soluble reactive phosphorus (SRP) contents in litter (rice hull) after broiler chicks were raised for 42 days. Two different additives were applied as a top dressing to the litter at a rate of 200 g ferrous sulfate $(FeSO_4)$ or 200 g aluminum sulfate [$Al_2(SO_4)_3$ $\cdot$ $14H_2O$, Alum] per kg litter, while the control group did not have the two chemicals added to the litter. A total of 64 broiler chicks (4 treatments$\times$4 replicates$\times$4 birds) were fed the experimental diets for 6 weeks. There was no difference in pH between the two chemical treatments and control group, but SRP content was significantly affected on it (P<0.01). SRP contents from ferrous sulfate and alum treated litter at 6 weeks were reduced by $79\%$ and $60\%$, respectively, as the two chemical treatments decreased the pH compared to the control group. In the ferrous sulfate treated litter, EC, TC, $NH_4-N$, $NO_3$-N, and IN contents did not show any difference between $FeSO_4$ treatment and control. However, the differences between $FeSO_4$ treatment and control were found in moisture, TN, ON, AN, PAN, C:N, and C:ON contents (P<0.01). As seen in the alum treated litter, there were differences in moisture, TC, TN, $NH_4-N$, IN, AN, PAN, and C:N contents between alum treatment and control (P<0.05 and 0.01) but no differences in EC, $NO_3-N$, ON, and C:ON. In conclusion, the results of this research show that ferrous sulfate and alum-treatment of poultry litter has the potential to increase N and reduce SRP content by lowering litter pH and moisture content.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.613-617
• /
• 2010

Ferro-Nickel slag is one of the by-products in Ferro-Nickel manufacturing process. The slag is composed of $SiO_2$, MgO, $Fe_2O_3$ and others. But the slag has been buried at landfill despite having valuable elements. This study tried to extract Mg ion and fabricate Mg compound from ferro-nickel slag using hydrochloric acid solution. Mg ion was extracted with Si, Fe and other ions in HCl solution. So reprocess was needed for gaining high purity Mg ion. It was thought that Si ion or $SiO_2$ precipitated in HCl solution and removed from solution in filtering process. Fe ion converted into $Fe(OH)_3$ after reacted with $NH_4OH$ and precipitated in HCl solution. After these process, the filtrate was composed of high purity Mg ion. $MgCl_2{\cdot}NH_4Cl{\cdot}6H_2O$ was obtained through drying of filtrate and this product was changed into MgO by burning process ($600^{\circ}C$-30 min). That is, 1st material or solution for manufacturing 2nd product was fabricated using acid dissolution method and other treatments.