• Journal of Life Science
• /
• v.27 no.2
• /
• pp.123-130
• /
• 2017

This study was conducted to investigate the physicochemical quality characteristics of pork patty added with four different amount (T0:0%, T1:0.3%, T2:0.7%, T3:1.0%) of tangerine (Citrus unshiu) peel. There was no significant difference in chemical composition, cooking yield, water holding capacity, moisture retention, fat retention, hardness, springiness, cohesiveness, gumminess, chewiness, VBN content, L-value. In taste, texture, juiciness and palatability, the addition of 0.3%~1.0% tangerine peel in pork patty showed no significant difference on sensory properties compared to the pork patty without tangerine peel. Total polyphenol content was highest in T3, and DPPH radical scavenging activity was highest in T2 and T3 (p<0.001). The TBARS contents decreased as tangerine peel become added (p<0.001). The pH was highest in T0, and was lowest in T3 (p<0.001). The external a-value of T2 and T3 were significantly higher than that of T0 (p<0.01). The external and internal b-value of T2 and T3 were higher than those of T0 (p<0.01). Flavor of T2 and T3 were higher than those of T0 and T1 (p<0.01). In conclusion, the results of this study indicate that an addition of tangerine peel could be utilized as an ingredient in pork patty in promotion of function of tangerine by-products.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.138-143
• /
• 2003

Total methanolic extract of Chrysanthemum coronarium L. var. spatiosum (Compositae) was revealed to have anti-hepatotoxic activity against galactosamine-induced toxicity on primary cultured rat hepatocytes. After successive partitioning with chloroform, n-butanol, and water, the chloroform fraction showed a significant inhibition activity of 51% at 50 ppm, compared with that of silybin, 45.9% at $100\;{\mu}M$. The chloroform fraction was subjected to silica gel column chromatography and yielded active CH-II, CH-V and CH-VI subfractions, and the anti-hepatotoxic activity of these subfractions were 47.6, 56.3, and 23.2%, respectively, at 50 ppm. Total glutathione contents of CH-II, CH-V, and CH-VI increased by 49.8, 43.9, and 47.5% of the control, respectively at 50 ppm, whereas that of silymarin was, 59.7% at $100\;{\mu}M$ after challenged with galactosamine. The ratio of (reduced glutathione) / (total glutathione) in CH-II, CH-V and CH-VI subfraction showed similar values of $0.86{\sim}0.87$ at 50 ppm, whereas that of silymarin was, 0.85 at $100\;{\mu}M$. The incorporation of $[^3H]-uridine$ uptake into RNA was not affected by these active subfractions.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.125-131
• /
• 2003

Physiological activities of hot water extracts of 10 commercial instant curry powders and 6 spices, were investigated. All spice extracts except ginger showed significant antioxidant activities on the autoxidation of linoleic curry acid (p＜0.01). Antioxidant activities of clove and fennel were significantly higher than ${\alpha}-tocopherol$, instant curry powders, and other spices, Red pepper $(52.8{\pm}2.13%)$, clove, and coriander showed significant inhibitory activities against angiotensin-I-converting enzyme (p＜0.001). Cytotoxic effects of instant curry powder and spices against human cancer cell lines were examined through MTT assay. Black pepper $(29.31{\pm}2.21%\;cytotoxic\;rate)$ and cardamon $(19.41{\pm}3.92%)$ were effective against MCF-7 (p＜0.01), Clove $(42.92{\pm}5.57%)$ against HeLa (p＜0.01). Ginger $(34.21{\pm}1.11%)$, cardamon, and black pepper against A172 (p＜0.001), garlic $(82.88{\pm}0.53%)$ against SN12C (p＜0.001), garlic $(71.63{\pm}0.38%)$, red pepper, ginger, fenugreek, SPC, cumin, and MPC against SNU-638 (p＜0.001), and cassia $(82.84{\pm}16.92%)$ against A549 (p＜0.001).

• Korean Journal of Food Science and Technology
• /
• v.7 no.1
• /
• pp.37-42
• /
• 1975

The color intensity (Absorbance at 490nm) and the antioxidant effects of absolute and 90% ethanol extracts obtained from a Maillard-type browning reaction mixture (0. 5M glucose and 0. 5M glycine mixture, heated at $100^{\circ}C$) were determined. The color intensity of the absolute and 90% ethanol extracts were compared with the length of reaction time and the antioxidant effects of the extracts of both types were compared one another. The results obtained are as follows. 1. The color intensity of the absolute ethanol extracts remained almost unchanged as the browning reaction proceeded. The color intensity of the 90% ethanol extracts appeared to increase nearly in proportion to the length of reaction time. 2. The absolute and the 90% ethanol extracts seemed to possess significant antioxidant activity on the autoxidation of an edible soybean oil. which was kept at $45{\pm}0.5^{\circ}C$ for 21 days. It was noteworthy that the absolute ethanol extracts showed stronger antioxidant effects than those of the 90% ethanol extracts, which contained a far greater amount of brown-colored pigments. Since the PVs of the controls in both groups, after the end of the storage period, did not differ much from one another, the possibility of residual water playing some prooxidant role in the substrates containing the 90% ethanol extracts should be ruled out. Extracts of both types obtained at earlier stages of the brownig reaction demonstrated less but comparable antioxidant activity to that of extracts taken at later stages of the reaction. 3. The results of the present study appeared to suggest that the effective antioxidant compounds, produced in the Maillard-type browning reaction, were probably intermediate products such as reductones formed at fairly earlier stages of the browning reaction.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.4
• /
• pp.215-228
• /
• 1991

In the East Sea of Korea the vertical structure functions of the temperature field were evaluated and the characteristic thermal zone was classified by the use of the empirical orthogonal function(EOF) method. The East Sea of Korea within the hydrographic lines of 10-107 of the Fisheries Research and Development Agency of Korea(FRDA) can be divided into three thermal regions by the characteristics of the vertical temperature variability. They are the North Korean Cold Current(NKCC) region near the coast which extends parallel to the north-south direction, the Warm-Core(WC) region which dominates almost all the hydrographic stations of the Line 104 of the FRDA and occupies a few stations of the Line-103 and -105 with its axis at the Line 104, and the East Korea Warm Current(EKWC) region which is bisected into the northern and the southern part by the WC region, respectively. Considering the two most important modes, $85.20-98.20\%$ of the total variance of temperature variation are explained in the NKCC region, $85.20-92.90\%$ in the EKWC region, and$85.50-91.70\%$ in the WC region. The first mode has its peak value at the surface with the annual cycle of variation. The spatial pattern of the first mode portrays a coherent vertical variation in the EKWC region and a clear anti-correlation both in the NKCC region and in the WC region where the zero-crossing depths are loom and 200m, respectively. The second mode of the NKCC region is particularly noticeable, haying its peak at loom with coherent vertical variation. To study the time dependency of the vertical structure functions, the extended EOF(EEOF) method was used. The persistence of the first mode is less than 4 months in the study area. The annual variation of the first mode in the NKCC region is different from those in the WC region and in the EKWC region.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.295-300
• /
• 2015

Purpose: The aim of this study was to evaluate the shear bond strength between Ni-Cr alloy and composite resin using universal adhesive systems coMPared to conventional method using metal primers. Materials and methods: For this study, a total of 120 cast commercial Ni-Cr alloy (Vera Bond 2V) disks were embedded in acrylic resin, and their surfaces were smoothed with silicon carbide papers and airborne-particle abrasion. Specimens of each metal were divided into 6 groups based on the combination of metal primers (Metal primer II, Alloy primer, Metal & Zirconia primer, MKZ primer) and universal adhesive systems (Single Bond Universal, All Bond Universal). All specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Shear bond strength testing was performed with a universal testing machine at a cross head speed of 1 m/min. Data (MPa) were analyzed using one-way ANOVA and the post hoc Tukey's multiple comparison test (${\alpha}$=.05). Results: There were significant differences between Single Bond Universal, All Bond Universal, Metal Primer II and Alloy Primer, MKZ Primer, Metal & Zirconia Primer (P<.001). Conclusion: Universal Adhesive system groups indicated high shear bond strength value bonded to Ni-Cr alloy than that of conventional system groups using primers except Metal Primer II. Within the limitations of this study, improvement of universal adhesive systems which can be applied to all types of restorations is recommended especially non-precious metal alloy. More research is needed to evaluate the effect of silane inclusion or exclusion in universal adhesive systems.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.33-41
• /
• 2011

The objective of this study was to compare the shear bond strengths of five dentin adhesive systems cured with three different light curing sources. Seventy five noncarious permanent teeth were collected and stored in an 0.1% thymol solution at room temperature after extraction. The tested adhesives were: Adper Scotchbond Multi-purpose Plus Adhesive (SM) Adper Single bond 2 (SB), Clearfil SE Bond (SE), Adper Prompt L-Pop (PL), G-Bond (GB). And three light curing unit systems were used: Elipar Free light 2(LED), OptiLux 501 (Halogen), Flipo (PAC). For the shear bonding test, the labial and lingual surfaces of permanent teeth were used. To obtain a flat dentin surface, the labial and lingual surfaces of the teeth were sanded on SiO2 with number 600 grit and then divided into 15 groups of 10 surfaces each. All samples were theromocycled in water $5^{\circ}C$ and $55^{\circ}C$ for 1000 cycles. The results were as follows: 1. When cured with Freelight 2, the shear bond strength of SM was significantly higher than that of PL, GB (p<0.05), whereas no significant difference was found among those of any other bonding agents. 2. When cured with Optilux 501, the shear bond strength of SM was significantly higher than those of any other bonding agents (p<0.05), whereas no singnificant difference was found among those of andy other bonding agents. 3. When cured with Flipo, the shear bond strength of SM was significantly higher than those of SB, SE, GB (p<0.05), whereas no significant differences was found among those of any other bonding agents. 4. For comparison according to three different light cure unit system, except SB and GB, each three dentin bonding agents showed no significant difference. For SB, only Freelight 2 was significantly higher than the others, with no significant difference between Optilux 501 and Flip. For GB, Statistically significant difference was found only between Freelight and Flipo.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.3
• /
• pp.288-297
• /
• 2010

The purpose of this study was to evaluate the effect of light cured fluoride-releasing materials on the inhibition of demineralization. In addition, the pattern of fluoride uptake of adjacent tooth structure was analyzed with EPMA. Eighty intact premolars were restored with $Filtek^{TM}$ Z250(control group, composite), Fuji Filling $LC^{TM}$(RMGI), Dyract $AP^{(R)}$ (compomer) and Beautifil II(giomer). Restored teeth were stored in distilled water for 30 days. Then sixty teeth(n=15) were exposed to demineralizing solution(pH 4.3). Demineralized teeth were bisected and polished. The specimens were observed with confocal laser scanning microscope. The depth of outer lesion and the thickness of inhibition zone were measured. Remained twenty teeth(n=5) were bisected for fluoride uptake analysis. The fluoride analysis were taken at enamel-restoration interface and dentin-restoration interface by electron probe micro-analyzer. The results are as follows: 1. The depth of outer lesion of Fuji Filling $LC^{TM}$ Dyract AP, Beautifil II was shallower than that of $Filtek^{TM}$ Z250 at the margin of restoration(p<0.05). 2. The thickness of caries inhibition zone of Fuji Filling $LC^{TM}$, Dyract AP, Beautifil II was greater than that of $Filtek^{TM}$ Z250 at the margin of restoration(p<0.05). 3. Fuji Filling $LC^{TM}$, Dyract AP, Beautifil II groups showed the greater fluoride uptake into enamel and dentine around restoration than $Filtek^{TM}$ Z250 group. 4. In dentin the difference of fluoride concentration were greater than in enamel, and Dyract AP showed the greatest fluoride concentration in dentin.

• Journal of Aquaculture
• /
• v.10 no.2
• /
• pp.133-141
• /
• 1997

Gonadal maturation and annual reproductive cycle of the cultured scallop, Patinopecten yessoensis from eastern waters near of Kangwon-do province, Korea were studied on the basis of monthly variation of gonadosomatic indices (GSI) and histological observations of gonadal tissue. During the experimental period, water temperature at the depth of 20m and sunshine duration per day were ranged from $5.3^{\circ}C\;to\;18.0^{\circ}C$ and 9.4 to 14.6 hours, respectively. GSI values of femal were in a wide range from $2.8\pm0.37(August)\;to\;22.66\pm4.38(April)$. GSI values began to increase in March and reached the maxium in April, then decreased repidly. GSI values of male were in a range from $2.04\pm0.80(August)\;to\;20.46\pm1.49(April)$ and were same tendency with female's. Digestive diverticula indices (DDI) of both sex reached the maximum values in December, then deceased gradually until September. Contrary to GSI, adductor muscle indices (AMI) of both sex were the minium values in April, but began to increase rapidly until July and reached $47.71\pm3.17(female)\;and\;48.70\pm3.55(male)$. In the scallp collected hermaphroditic gonads were found. Monthly changes of oocyte diameter were in a range from 11.3 um(October) to 73.3um (April) and nuclear diameters were in a range from 8.3um (September) to 35.3um (April), similar tendency with each other. The changes in number of ovarian tubules were reciprocal tendency with those of oocyte diameter and monthly number of ovarian tubules per $\textrm{mm}^2$ in the tissue perpatation was in a range from 51 (April) to 175 (August). As the results, the annual reproductive cycle of the cultured scallolp from eastern waters of Korea could be classified into five successive stages : multiplicative (October), growing (November to February), mature (March and April), spawning (April to June) and recovery (July to September) in female ; multiplicative (October and November), growing (December and January), mature (February to April), spawning (April to June) and recovery (July to September) in male.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.664-671
• /
• 2017

Non-point source pollution is the emission source that unspecifically releases pollutants to water system from unspecific places such as cities, agricultural lands, mountains, and construction sites and its discharge path is not easily identified. Also, it is difficult to design and manage the reduction facilities for the emission quantity is primarily affected from weather conditions like rainfall. Since 2006, the significance of non-point source pollution reduction has been grown in Republic of Korea and this reinforces needs for the installation of reduction facilities. However, because the standards for the installation details and reduction efficiency are not clarified by law, people are preferring technologies that do not require particular maintenance and high expenses. The purpose of this study is to examine and maintain the efficiency of non-point source pollutants reduction facility which uses expended polypropylene as a media. The higher the depth of the media, the less range of variations in the reduction efficiency was observed and the final efficiency was also increased. When the media depth was 60 cm, the average reduction efficiency was 94% and 90% where linear velocities were 10 m/hr and 20 m/hr respectively. The results from 180 minutes operation in 10 m/hr and 20 m/hr of linear velocities were slightly different in head loss changes which were caused by media depth variations. The backwash experiments which were conducted in triplicate showed the reduction efficiency decreased as the time went on because of the media clogging. However, it was found that after the backwashing the reduction efficiency was increased as effective as the efficiency of the initial filtration.