1 |
Mortezazadeh, M., Ali, K. and Khodayar J. (2014), "Cavitation control on hydrofoils", Proceedings of the International Conference on Heat Transfer and Fluid Flow, Prague, Czech Republic, August.
|
2 |
Oller, S.A., Nallim, L.G. and Oller, S. (2016), "Usability of the Selig S1223 profile airfoil as a high lift hydrofoil for hydrokinetic application", J. Appl. Fluid Mech., 9(2), 537-542.
DOI
|
3 |
Petrie, D.M. (1966), "Operational and developmental experience on the U.S. navy hydrofoil high point", J. Aircraft, 3(1), 79-84. https://doi.org/10.2514/3.59269.
DOI
|
4 |
Phoemsapthawee, S., Jean-Baptiste, L., Steven, K. and Jean-Marc, L. (2012), "Implementation of a transpiration velocity-based cavitation model within a RANSE solver", Eur. J. Mech. B/Fluids, 32, 45-51. https://doi.org/10.1016/j.euromechflu.2011.11.001.
DOI
|
5 |
Puorger, P.C., Dessi, D. and Mastroddi, F. (2007), "Preliminary design of an amphibious aircraft by the multidisciplinary design optimization approach", Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, U.S.A.
|
6 |
Qiu, L. and Song, W. (2016), "Efficient multiobjective optimization of amphibious aircraft fuselage steps with decoupled hydrodynamic and aerodynamic analysis models", J. Aerosp. Eng., 29(3), 04015071. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000557.
DOI
|
7 |
Qiu, L. and Song, W.B. (2013), "Efficient decoupled hydrodynamic and aerodynamic analysis of amphibious aircraft water takeoff process", J. Aircraft, 50(5), 1369-1379. https://doi.org/10.2514/1.C031846.
DOI
|
8 |
Roohi, E., Amir, P.Z. and Mahmood P.F. (2013), "Numerical simulation of cavitation around a two-dimensional hydrofoil using VOF method and LES turbulence model", Appl. Math. Model., 37, 6469-6488. https://doi.org/10.1016/j.apm.2012.09.002.
DOI
|
9 |
Rozhdestvensky, K.V. (2006), "Wing-in-ground effect vehicles", Progress Aerosp. Sci., 42(3), 211-283. https://doi.org/10.1016/j.paerosci.2006.10.001.
DOI
|
10 |
Seol, H. (2013), "Time domain method for the prediction of pressure fluctuation induced by propeller sheet cavitation: numerical simulations and experimental validation", Ocean Eng., 72, 287-296. https://doi.org/10.1016/j.oceaneng.2013.06.030.
DOI
|
11 |
Seth, A. and Liem, R.P. (2018), "Takeoff analysis on amphibious aircraft with implementation of a hydrofoil", Proceedings of the World Congress on Advance in Civil, Environmental, and Materials Research, Incheon, South Korea, August.
|
12 |
Shen, Y.T. and Eppler, R. (1981), "Wing sections for hydrofoils, part 2 non-symmetrical profiles", J. Ship Res., 25, 191-200.
DOI
|
13 |
Shoemaker, J.M. and Parkinson, J.B. (1933), "A complete tank test of a model of a flying-boat hull - N.A.C.A Model no. 11", Technical Report 464. National Advisory Committee for Aeronautics, Washington, U.S.A.
|
14 |
Somers, D.M. (2012), "Design of a slotted, natural-laminar-flow airfoil for business-jet applications", Research Report NASA/CR-2012-217559, Langley Research Center, Pennsylvania, U.S.A.
|
15 |
Thurston, D.B. (1995), Design for Flying, 2nd Edition, TAB Books.
|
16 |
Thurston, D.B. and Vagianos, N.J. (1970), "Hydrofoil Seaplane Design" Unclassified Final Report no. 6912 for Naval Air Systems Command under contract N00019-69-0475, Sandford, Maine, U.K.
|
17 |
Timoshevskiy, M.V., Ivan, I.Z., Konstantin, S.P. and Dmitriy, M.M. (2016), "Cavitating flow control through continuous tangential mass injection on a 2D hydrofoil at a small attack angle", Proceedings of the International Symposium and School of Young Scientists "Interfacial Phenomena and Heat Transfer", Russia, November.
|
18 |
Yakowitz, S.J. and Szidarovsky F. (1985), "A comparison of kriging with nonparametric regression methods", J. Multivariate Anal., 16(1), 21-53.
DOI
|
19 |
Wang, G., Inanc, S., Wei, S., Toshiaki, I. and Shuliang, C. (2001), "Dynamics of attached turbulent cavitating flows", Progress Aerosp. Sci., 37(6), 551-581. https://doi.org/10.1016/S0376-0421(01)00014-8.
DOI
|
20 |
Wei, Q., Chen, H.X. and Rui, Z. (2015) "Numerical research on the performances of slot hydrofoil", J. Hydrodynam., 27(1), 105-111. https://doi.org/10.1016/S1001-6058(15)60462-0.
DOI
|
21 |
Zhao, M. and Wan, D. (2018), "Numerical investigation of cloud cavitation flows around Clark-Y hydrofoil", Proceedings of the 3rd International Symposium of Cavitation and Multiphase Flow, Shanghai, China, April.
|
22 |
Homa, D., Wroblewski, W., Majkut, M. and Strozik, M. (2018), "Experimental and numerical investigation of cavitation on Clark-Y foil", J. Phys. Conf. Ser., 1101, 012008.
DOI
|
23 |
Hilleman, T.B. (2005), "Apparatus and method for reducing hydrofoil cavitation", Patent number: US 2005/0076819 A1.
|
24 |
Homa, D. (2014), "Comparison of different mathematical models of cavitation", Trans. VSB Tech. Univ. Ostrava Mech. Ser., 60(2).
|
25 |
Homa, D. and Wroblewski, W. (2016), "Numerical research on unsteady cavitating flow over a hydrofoil", J. Phys. Conf. Ser., 760, 012006.
DOI
|
26 |
Hong, F., Yuan, J. and Zhou, B. (2017), "Appplication of a new cavitation model for computations of unsteady turbulent cavitating flows around a hydrofoil", J. Mech. Sci. Technol., 31(1), 249-260. https://doi.org/10.1007/s12206-016-1227-x.
DOI
|
27 |
Iliev, S.P. (2017), "Aerofoil analysis using XFOIL - practical implementation for preliminary wing design", Imperial College London, U.K.
|
28 |
Sarc, A., Stepisnik-Perdih T., Martin, P. and Matevz, D. (2017), "The issue of cavitation number value in studies of water treatment by hydrodynamic cavitation", Ultrasonics Sonochem., 34, 51-59. https://doi.org/10.1016/j.ultsonch.2016.05.020.
DOI
|
29 |
Huang, B., Wang, G., Yu, Z. and Shi, S. (2012), "Detached-eddy simulation for time-dependent turbulent cavitating flows", Chin. J. Mech. Eng., 25(3), 484-490. https://doi.org/10.3901/CJME.2012.03.484.
DOI
|
30 |
Huang, B., Young, Y.L., Wang, G. and Shyy, W. (2013), "Combined experimental and computational investigation of unsteady structure of sheet/cloud cavitation", J. Fluids Eng., 135(7), 071301. https://doi.org/10.1115/1.4023650.
DOI
|
31 |
Jameson, A. (1998), "Aerodynamic design via control theory", J. Sci. Comput., 3(3), 233-260. https://doi.org/10.1007/BF01061285.
DOI
|
32 |
King, H.F. (1966), Aeromarine Origins: The Beginnings of Marine Aircraft, Winged Hulls, Air-Cushion and Air-Lubricated Craft, Planing Boats and Hydrofoils, (1st Edition), Aero-Publishers.
|
33 |
Jameson, A. (1990), "Automatic design of transonic airfoils to reduce the shock induced pressure drag", Proceedings of the 31st Israel Annual Conference on Aviation and Aeronautics, Haifa, Israel.
|
34 |
Jin, R., Wei, C. and Agus S. (2005), "An efficient algorithm for constructing optimal design of computer experiments", J. Stat. Plan. Infer., 134, 268-287. https://doi.org/10.1115/DETC2003/DAC-48760.
DOI
|
35 |
Khuri, A.I. and Mukhopadhyay, S. (2010), "Response surface methodology", Wiley Interdisciplin. Rev. Comput. Stat., 2, 128-149. https://doi.org/10.1002/wics.73.
DOI
|
36 |
Liu, Y., Wang, J. and Wan, D. (2019), "Numerical simulations of cavitation flows around Clark-Y hydrofoil", J. Appl. Math. Phys., 7, 1660-1676. https://doi.org/10.4236/jamp.2019.78113
DOI
|
37 |
Mercier, J.A. (1969), Tests of a Variable Sweep Hydrofoil with Cavitation and Ventilation, Defense Technical Information Center, U.S.A.
|
38 |
Bell, J.W. (1935), "The effect of depth of step on the water performance of a flying-boat hull model", Technical Report No. 535, National Advisory Committee for Aeronautics (NACA), Washington, U.S.A.
|
39 |
ANSYS Fluent (2017), ANSYS Fluent Theory Guide, ANSYS Inc., Southpointe, Canonsburg, Pennsylvania, U.S.A.
|
40 |
Belamadi, R., Abdelouaheb, D., Adrian, I. and Ramzi, M. (2016), "Aerodynamic performance analysis of slotted airfoils for application to wind turbine blades", J. Wind Eng. Industr. Aerodyn., 151, 79-99. https://doi.org/10.1016/j.jweia.2016.01.011.
DOI
|
41 |
Gudmundsson, S. (2013), General Aviation Aircraft Design: Applied Methods and Procedures, Appendix C3: Design of Seaplanes, (1st Edition), Butterworth-Heinemann, U.S.A.
|
42 |
Canamar, A. (2012), "Seaplane conceptual design and sizing", M.Sc. Thesis, University of Glasgow, Soctland, U.K.
|
43 |
Chiandussi, G., Codegone, M., Ferrero, S. and Varesio, F.E. (2012), "Comparison of multi-objective optimization methodologies for engineering applications", Comput. Math. Appl., 63(5), 912-942. https://doi.org/10.1016/j.camwa.2011.11.057.
DOI
|
44 |
Garg, N., Gaetan, K.K.W., Joaquim, R.R.A.M. and Yin L.Y. (2017), "High-fidelity multipoint hydrostructural optimization of a 3-D hydrofoil", J. Fluids Struct., 71, 15-39. https://doi.org/10.1016/j.jfluidstructs.2017.02.001.
DOI
|
45 |
Hicks, R.M., Murman, E.M. and Vanderplaats, G.N. (1974), "An assessment of airfoil design by numerical optimization", Technical Report NASA TM X-3092, California, U.S.A.
|